Search

Wood is an increasingly demanded renewable resource and an important raw material for construction and materials. In addition, new consumption habits are leading to the production of ever greater volumes of waste wood, which constitutes a feedstock that can be mobilized for the cascade production of new materials such as particleboard. However, current legislation and wood waste recycling processes need to be improved in order to maximize the volumes that can be reused and to upgrade the properties of the recycled wood. This review describes wood waste flows and volumes available in Europe, the current French and European legislation, and the innovations under development in this field: innovative automated sorting techniques, physical-chemical processes for cleaning residual glue from the surface of wood particles, cleaning of MDF, and bioremediation processes for cleaning hazardous wood contaminated by heavy metals or creosote. [ABSTRACT FROM AUTHOR]

Wood-based products usually have serious limitations concerning contact with water, both because wood is a hygroscopic material and because the commonly used binder has low moisture resistance. This paper studies the effect of panel moisture content (MC) on the physico-mechanical properties of medium density fiberboards (MDF). Several commercial MDF boards produced in Europe were stored at room temperature and relative humidity (RH) for 9 weeks (approx. range 15–20 °C and 50–85% RH). Every week, a strip of each MDF board was cut out, divided into 5 × 5 cm test pieces and its internal bond strength (IB) was measured. A strong influence of MDF moisture content on internal bond strength was observed and therefore IB test pieces were stored in a climatic chamber (either at 20 °C, 55% RH and at 20 °C, 70% RH). A decreasing linear relation was established between IB and MC. It was found that this effect is reversible: after drying, internal bond strength rises again (following a slight hysteresis). This work reinforces the importance of conditioned storage before board properties analysis, as described in European Standard EN 319. [ABSTRACT FROM AUTHOR]