Search

Volatile organic compounds (VOCs) are key precursors of particulate matter and tropospheric ozone. Although the terrestrial biosphere is by far the largest source of VOCs into the atmosphere, the emissions of biogenic VOCs remain poorly constrained at the regional scale. In this work, we derive top-down biogenic emissions over Europe using weekly averaged TROPOMI formaldehyde (HCHO) data from 2018 to 2021. The systematic bias of the TROPOMI HCHO columns is characterized and corrected for based on comparisons with FTIR data at seven European stations. The top-down fluxes of biogenic, pyrogenic, and anthropogenic VOC sources are optimized using an inversion framework based on the MAGRITTEv1.1 chemistry transport model and its adjoint. The inversion leads to strongly increased isoprene emissions with respect to the MEGAN–MOHYCAN inventory over the model domain (from 8.1 to 18.5 Tgyr-1), which is driven by the high observed TROPOMI HCHO columns in southern Europe. The impact of the inversion on biomass burning VOCs (+ 13 %) and anthropogenic VOCs (- 17 %) is moderate. An evaluation of the optimized HCHO distribution against ground-based remote sensing (FTIR and MAX-DOAS) and in situ data provides generally improved agreement at stations below about 50 ∘ N but indicates overestimated emissions in northern Scandinavia. Sensitivity inversions show that the top-down emissions are robust with respect to changes in the inversion settings and in the model chemical mechanism, leading to differences of up to 10 % in the total emissions. However, the top-down emissions are very sensitive to the bias correction of the observed columns, as the biogenic emissions are 3 times lower when the correction is not applied. Furthermore, the use of different a priori biogenic emissions has a significant impact on the inversion results due to large differences among bottom-up inventories. The sensitivity run using CAMS-GLOB-BIOv3.1 as a priori emissions in the inversion results in 30 % lower emissions with respect to the optimization using MEGAN–MOHYCAN. In regions with large temperature and cloud cover variations, there is strong week-to-week variability in the observed HCHO columns. The top-down emissions, which are optimized at weekly increments, have a much improved capability of representing these large fluctuations than an inversion using monthly increments. [ABSTRACT FROM AUTHOR]

Volatile organic compounds (VOCs) are key precursors of particulate matter and tropospheric ozone. Although the terrestrial biosphere is by far the largest source of VOCs into the atmosphere, the emissions of biogenic VOCs remain poorly constrained at regional scale. In this work, we derive top-down biogenic emissions over Europe using weekly-averaged TROPOMI formaldehyde (HCHO) data from 2018 to 2021. The systematic bias of the TROPOMI HCHO columns is characterized and corrected for based on comparisons with FTIR data at seven European stations. The top-down fluxes of biogenic, pyrogenic, and anthropogenic VOC sources are optimized using an inversion framework based on the MAGRITTEv1.1 chemistry transport model and its adjoint. The inversion leads to strongly increased isoprene emissions with respect to the MEGAN-MOHYCAN inventory over the model domain (from 8.1 to 18.5 Tg yr-1) which is driven by the high observed TROPOMI HCHO columns in southern Europe. The impact of the inversion on biomass burning VOCs (+13 %) and anthropogenic VOCs (-17 %) is moderate. An evaluation of the optimized HCHO distribution against ground-based remote sensing (FTIR and MAX-DOAS) and in situ data provides generally improved agreement at stations below about 50° N, but indicates overestimated emissions in northern Scandinavia. Sensitivity inversions show that the top-down emissions are robust with respect to changes in the inversion settings and in the model chemical mechanism. However, the top-down emissions are very sensitive to the bias correction of the observed columns. Furthermore, the use of different a priori emissions has a significant impact on the inversion results due to large differences among bottom-up inventories. In regions with variable meteorology, there is strong week-to-week variability in the observed HCHO columns. The top-down emissions, which are optimized at weekly increments, have a much improved capability of representing these large fluctuations than an inversion using monthly increments. [ABSTRACT FROM AUTHOR]

Launched in October 2017, the TROPOspheric Monitoring Instrument (TROPOMI) aboard Sentinel-5 Precursor provides the potential to monitor air quality over point sources across the globe with a spatial resolution as high as 5.5 km × 3.5 km (7 km × 3.5 km before 6 August 2019). The DLR nitrogen dioxide (NO2) retrieval algorithm for the TROPOMI instrument consists of three steps: the spectral fitting of the slant column, the separation of stratospheric and tropospheric contributions, and the conversion of the slant column to a vertical column using an air mass factor (AMF) calculation. In this work, an improved DLR tropospheric NO2 retrieval algorithm from TROPOMI measurements over Europe is presented. The stratospheric estimation is implemented using the STRatospheric Estimation Algorithm from Mainz (STREAM), which was developed as a verification algorithm for TROPOMI and does not require chemistry transport model data as input. A directionally dependent STREAM (DSTREAM) is developed to correct for the dependency of the stratospheric NO2 on the viewing geometry by up to 2×1014 molec./cm 2. Applied to synthetic TROPOMI data, the uncertainty in the stratospheric column is 3.5×1014 molec./cm 2 in the case of significant tropospheric sources. Applied to actual measurements, the smooth variation of stratospheric NO2 at low latitudes is conserved, and stronger stratospheric variation at higher latitudes is captured. For AMF calculation, the climatological surface albedo data are replaced by geometry-dependent effective Lambertian equivalent reflectivity (GE_LER) obtained directly from TROPOMI measurements with a high spatial resolution. Mesoscale-resolution a priori NO2 profiles are obtained from the regional POLYPHEMUS/DLR chemistry transport model with the TNO-MACC emission inventory. Based on the latest TROPOMI operational cloud parameters, a more realistic cloud treatment is provided by a Clouds-As-Layers (CAL) model, which treats the clouds as uniform layers of water droplets, instead of the Clouds-As-Reflecting-Boundaries (CRB) model, in which clouds are simplified as Lambertian reflectors. For the error analysis, the tropospheric AMF uncertainty, which is the largest source of NO2 uncertainty for polluted scenarios, ranges between 20 % and 50 %, leading to a total uncertainty in the tropospheric NO2 column in the 30 %–60 % range. From a validation performed with ground-based multi-axis differential optical absorption spectroscopy (MAX-DOAS) measurements, the new DLR tropospheric NO2 data show good correlations for nine European urban/suburban stations, with an average correlation coefficient of 0.78. The implementation of the algorithm improvements leads to a decrease of the relative difference from - 55.3 % to - 34.7 % on average in comparison with the DLR reference retrieval. When the satellite averaging kernels are used to remove the contribution of a priori profile shape, the relative difference decreases further to ∼ - 20 %. [ABSTRACT FROM AUTHOR]

Launched in October 2017, the TROPOspheric Monitoring Instrument (TROPOMI) aboard Sentinel-5 Precursor provides the potential to monitor air quality over point sources across the globe with a spatial resolution as high as 5.5 km × 3.5 km (7 km × 3.5 km before 6 August 2019). The nitrogen dioxide (NO2) retrieval algorithm for the TROPOMI instrument consists of three steps: the spectral fitting of the slant column, the separation of stratospheric and tropospheric contributions, and the conversion of the slant column to a vertical column using an air mass factor (AMF) calculation. In this work, an improved tropospheric NO2 retrieval algorithm from TROPOMI measurements over Europe is presented. The stratospheric estimation is implemented using the STRatospheric Estimation Algorithm from Mainz (STREAM), which was developed as a verification algorithm for TROPOMI and does not require chemistry transport model data as input. A directionally dependent STREAM (DSTREAM) is developed to correct for the dependency of the stratospheric NO2 on the viewing geometry by up to 2 × 1014 molec/cm2. Applied to synthetic TROPOMI data, the uncertainty in the stratospheric column is 3.5 × 1014 molec/cm2 for polluted conditions. Applied to actual measurements, the smooth variation of stratospheric NO2 at low latitudes is conserved, and stronger stratospheric variation at higher latitudes are captured. For AMF calculation, the climatological surface albedo data is replaced by geometry-dependent effective Lambertian equivalent reflectivity (GE_LER) obtained directly from TROPOMI measurements with a high spatial resolution. Mesoscale-resolution a priori NO2 profiles are obtained from the regional POLYPHEMUS/DLR chemistry transport model with the TNO-MACC emission inventory. Based on the latest TROPOMI operational cloud parameters, a more realistic cloud treatment is provided by a clouds-as-layers (CAL) model, which treats the clouds as uniform layers of water droplets, instead of the clouds-as-reflecting-boundaries (CRB) model, in which clouds are simplified as Lambertian reflectors. For the error analysis, the tropospheric AMF uncertainty, which is the largest source of NO2 uncertainty for polluted scenarios, ranges between 20 % and 50 %, leading to a total uncertainty in the tropospheric NO2 column in the 30-60 % range. From a validation performed with ground-based multi-axis differential optical absorption spectroscopy (MAX-DOAS) measurements, the improved tropospheric NO2 data shows good correlations for nine European urban/suburban stations with an average correlation coefficient of 0.78. The implementation of the algorithm improvements leads to a decrease of the relative difference from −55.3 % to −34.7 % on average. [ABSTRACT FROM AUTHOR]