Search

Cereals are of utmost importance for the nutrition of infants and children, as they provide important nutrients for their growth and development and, in addition, they are easily digestible, being the best choice for the transition from breast milk/infant formula to solid foods. It is well known that children are more susceptible than adults to toxic food contaminants, such as mycotoxins, common contaminants in cereals. Many mycotoxins are already regulated and controlled according to strict quality control standards in Europe and around the world. There are, however, some mycotoxins about which the level of knowledge is lower: the so-called emerging mycotoxins, which are not yet regulated. The current review summarizes the recent information (since 2014) published in the scientific literature on the amounts of mycotoxins in infants' and children's cereal-based food in Europe, as well as their behaviour during digestion (bioaccessibility). Additionally, analytical methods used for mycotoxin determination and in vitro methods used to evaluate bioaccessibility are also reported. Some studies demonstrated the co-occurrence of regulated and emerging mycotoxins in cereal products used in children's food, which highlights the need to adopt guidelines on the simultaneous presence of more than one mycotoxin. Although very little research has been done on the bioaccessibility of mycotoxins in these food products, very interesting results correlating the fiber and lipid contents of such products with a higher or lower bioaccessibility of mycotoxins were reported. LC-MS/MS is the method of choice for the detection and quantification of mycotoxins due to its high sensibility and accuracy. In vitro static digestion models are the preferred ones for bioaccessibility evaluation due to their simplicity and accuracy. [ABSTRACT FROM AUTHOR]

Abstract Icatibant is a peptidomimetic drug serving as a bradykinin-receptor antagonist and is approved in Europe and the United States for the treatment of hereditary angioedema attacks. We have detected an impurity with a high structural similarity to icatibant in pharmaceutical dosage forms using an optimized chromatographic method based on reversed phase high performance liquid chromatography with UV detection. The abundance of the impurity was around 1% relative to the icatibant peak following storage at room temperature for 1 month, and raised up to ~16% upon temperature stressing at 100 °C. The impurity was isolated by fraction collection and further purified by solid phase extraction for structural identification. NMR and high resolution mass spectrometric analyses revealed that this impurity results from isomerization in the N-terminal single amino acid residue. The new impurity may warrant particular attention due to its exceptional similarity to the active ingredient icatibant. Graphical abstract Unlabelled Image [ABSTRACT FROM AUTHOR]

Objectives: We present the results of two European external quality assessments (EQAs) conducted in 2014 and 2016 under the auspices of the Study Group on Staphylococci and Staphylococcal Infections of ESCMID. The objective was to assess the performance of participating centres in characterizing Staphylococcus aureus using their standard in-house phenotypic and genotypic protocols.Methods: A total of 11 well-characterized blindly coded S. aureus (n = 9), Staphylococcus argenteus (n = 1) and Staphylococcus capitis (n = 1) strains were distributed to participants for analysis. Species identification, MIC determination, antimicrobial susceptibility testing, antimicrobial resistance and toxin gene detection and molecular typing including spa typing, SCCmec typing and MLST were performed.Results: Thirteen laboratories from 12 European countries participated in one EQA or both EQAs. Despite considerable diversity in the methods employed, good concordance (90%-100%) with expected results was obtained. Discrepancies were observed for: (i) identification of the S. argenteus strain; (ii) phenotypic detection of low-level resistance to oxacillin in the mecC-positive strain; (iii) phenotypic detection of the inducible MLSB strain; and (iv) WGS-based detection of some resistance and toxin genes.Conclusions: Overall, good concordance (90%-100%) with expected results was observed. In some instances, the accurate detection of resistance and toxin genes from WGS data proved problematic, highlighting the need for validated and internationally agreed-on bioinformatics pipelines before such techniques are implemented routinely by microbiology laboratories. We strongly recommend all national reference laboratories and laboratories acting as referral centres to participate in such EQA initiatives. [ABSTRACT FROM AUTHOR]

An international collaborative study was run within the framework of the Biological Standardisation Programme (BSP) of the Council of Europe and the Commission of the European Union to establish replacement batches for European Pharmacopoeia (Ph. Eur.) Heparin Low-Molecular-Mass (LMM) for calibration Chemical Reference Substance batch 3 (CRS3) used for the characterisation of LMM heparins by high performance size-exclusion chromatography. Two candidate batches (A, cCRS4 and B, cCRS5) were filled using the same material as the existing official calibrants, adopted with either an assigned number-average molecular mass (Mna) or a broad standard table (BST). Fifteen laboratories evaluated the suitability of these candidate batches for use as calibrants with the pharmacopoeial dual refractive index/ultraviolet (RI/UV) detector calibration method, as well as with a modified mobile phase and the BST calibration method. Seven preparations of LMM heparin were tested. The results confirmed that the proposed batches are suitable for use with the same characteristic Mna as CRS3 and with the BST established for the World Health Organization (WHO) 2 nd International Standard (IS). The BST calibration method gave comparable results to the RI/UV method, while showing better reproducibility, being easier to perform and requiring no calibrant with UV absorbance. The modified mobile phase had no impact on the calculated values while improving separation between the calibrant and salt peaks. The two candidate batches were adopted as Ph. Eur. Heparin LMM for calibration CRS batches 4 and 5, respectively, with the assigned Mna value of 3800 and a BST. In anticipation of the depletion of the calibrant required for use with the RI/UV method, and taking into account the unlikely procurement of a new lot of suitable starting material, it was recommended to include the BST method in Ph. Eur. monograph 0828, Heparins, low-molecular-mass . In order to improve peak separation, it was also recommended to include the use of ammonium acetate solution as mobile phase in the monograph, both for the Ph. Eur. RI/UV and the proposed BST calibration methods. Further to this study, Ph. Eur. monograph 0828 was revised to replace the RI/UV method by the BST method. This contributed to the harmonisation of methods across regions, thereby facilitating a concerted global action for the development and establishment of the next batches of calibrants for the quality control of LMM heparins., (© Council of Europe 2023.)

In order to screen for the presence of a recycled polymer waste stream from waste electric and electronic equipment (WEEE), a market survey was conducted on black plastic food-contact articles (FCA). An analytical method was applied combining X-ray fluorescence spectrometry (XRF) with thermal desorption gas chromatography coupled with mass spectrometry (thermal desorption GC-MS). Firstly, XRF spectrometry was applied to distinguish bromine-positive samples. Secondly, bromine-positive samples were submitted for identification by thermal desorption GC-MS. Generally, the bromine-positive samples contained mainly technical decabromodiphenyl ether (decaBDE). Newer types of BFRs such as tetrabromobisphenol A (TBBPA), tetrabromobisphenol Abis(2,3-dibromopropyl), ether (TBBPA-BDBPE) and decabromodiphenylethane (DBDPE), replacing the polybrominated diphenyleters (PBDEs) and polybrominated diphenyls (PBBs), were also identified. In none of the tested samples were PBBs or hexabromocyclododecane (HBCD) found. Polymer identification was carried out using Fourier-transformed infrared spectroscopy measurement (FTIR) on all samples. The results indicate that polypropylene–polyethylene copolymers (PP-PE) and mainly styrene-based food-contact materials, such as acrylonitrile-butadiene-styrene (ABS) have the highest risk of containing BFRs. [ABSTRACT FROM AUTHOR]

Objective: The pharmacokinetics of phylloquinone (vitamin K1) were evaluated in healthy human adult volunteers (15 male and 15 female) following oral and intravenous administration of a mixed micelles formulation (Konakion® MM 2 mg) in an open label study design. The subjects were allocated to one of three genotype-specific groups ( n = 10 in each group) in terms of VKORC1 promoter polymorphism c.-1639 G > A to explore the relationship between genotype and pharmacokinetic parameters. Methods: Blood samples were collected for up to 24 h after administration. Phylloquinone serum levels were determined by reversed phase HPLC with fluorometric detection after post-column zinc reduction. Pharmacokinetic evaluation was performed using non-compartmental analysis. Results: Pharmacokinetic analysis of serum phylloquinone concentration versus time profiles revealed significant differences in the main pharmacokinetic parameters between groups. Upon oral administration, VKORC1 AG carriers showed 41 % higher mean bioavailability ( p = 0.01) compared with homozygous AA individuals. Furthermore, AG subjects exhibited 30 % ( p = 0.042) and 36 % ( p = 0.021) higher mean AUC compared with GG and AA respectively. Terminal half-life was 32 % and 27 % longer for AG carriers in comparison to GG ( p = 0.004) and AA ( p = 0.015) genotypes respectively. Conclusion: Pharmacokinetic differences indicated significant inter-individual variance of vitamin K fate in the human body. The influence of the VKORC1 promoter polymorphism c.-1639 G > A on the pharmacokinetic properties of phylloquinone could be demonstrated in humans. To gain deeper insight in other potential genetic determinants of systemic vitamin K exposure, further correlation of the phenotype-genotype relationship of different players in vitamin K turnover has to be gained. [ABSTRACT FROM AUTHOR]

Marine toxins are a food safety concern worldwide. This review discusses current analytical methods for those toxins that are legally regulated in Europe, namely domoic acid, saxitoxin, okadaic acid, yessotoxin, pectenotoxin and azaspiracids, and all their analogues, and those that are not regularly monitored but are a threat to humans, such as tetrodotoxin, ciguatoxins and cyclic imines. Because of legislative changes that were implemented in 2011, most legally required methods are chromatographic. Saxitoxin and domoic acid are monitored by high-performance liquid chromatography with fluorescent and ultraviolet detection, respectively. All other toxins are monitored nowadays by means of chromatographic separation and mass spectrometry detection. [ABSTRACT FROM AUTHOR]

To determine differences in mean aflatoxin contamination and subsample variance from dry and slurry homogenizations, 10 kg of six different, naturally contaminated dried fig samples were collected from various exporting companies in accordance with the EU Commission Directive. The samples were first dry-mixed for 5 min using a blender and sub-sampled seven times; the remainder was slurry homogenized (1 : 1, v/v) and sub-sampled seven times. Aflatoxin B1 and total aflatoxin levels were recorded and coefficient of variations (CV) computed for all sub-samples. Only a small reduction in sub-sample variations, indicated by the lower CV values, and slight differences in mean aflatoxin B1 and total aflatoxin levels were observed when slurry homogenization was applied. Therefore, 7326 dried figs, destined for export from Turkey to the EU and collected during the 2008 crop year, were dry-homogenized and tested for aflatoxins (B1, B2, G1 and G2) by immunoaffinity column clean-up using RP-HPLC. While 34% of the samples contained detectable levels of total aflatoxins (0.20-208.75 µg kg-1), only 9% of them exceeded the EU limit of 4 µg kg-1 in the range 2.0-208.75 µg kg-1, respectively. A substantial increase in the incidence of aflatoxins was observed in 2008, most likely due to the drought stress experienced in Aydin province as occurred in 2007. [ABSTRACT FROM AUTHOR]

Canned and jarred baby foods (74), canned and jarred adult foods (63) and 70 coffees sold in Belgium, Italy, Portugal, Spain and The Netherlands were analysed for their furan content using a validated automated headspace GC-MS procedure. Seven balsamic vinegars from Italy and Spain were also analysed. All 74 baby food samples contained detectable furan, with an average level of 37 ng/g. A total of 54 of 63 canned and jarred foods contained detectable furan with an average level of 24 ng/g. Levels of furan in coffee as consumed were very variable and reflected different preparation methods and coffee strengths. Over 50% of Italian samples contained more than 200 ng/g, whereas over 20% of Belgian coffees contained less than 21 ng/g furan. Some brews made from fine grained coffee contained much more furan than did brews made from normal or coarse grained coffee. Although furan was low in most instant coffees, two Italian products “instant espresso” and “instant mocha” contained about 150 ng/g furan. Balsamic vinegars from Spain contained 159-662 ng/g of furan; however, other samples from Spain and Italy contained only 6-25 ng/g. [ABSTRACT FROM AUTHOR]

[Display omitted] • Both Asia and Europe contributed largely to marine peptide research. • Combined processing technologies improved marine peptides yield and bioactivity. • Various biological activities shown by marine peptides were overviewed. • Amino acid sequence and structure determine the bioactivity of peptides. • Novel methods are needed to enhance bioavailability of the marine peptides. Marine peptides are one of the richest sources of structurally diverse bioactive compounds and a considerable attention has been drawn towards their production and bioactivity. However, there is a paucity in consolidation of emerging trends encompassing both production techniques and biological application. Herein, we intend to review the recent advancements on different production, purification and identification technologies used for marine peptides along with presenting their potential health benefits. Bibliometric analysis revealed a growing number of scientific publications on marine peptides (268 documents per year) with both Asia (37.2%) and Europe (33.1%) being the major contributors. Extraction and purification by ultrafiltration and enzymatic hydrolysis, followed by identification by chromatographic techniques coupled with an appropriate detector could yield a high content of peptides with improved bioactivity. Moreover, the multifunctional health benefits exerted by marine peptides including anti-microbial, antioxidant, anti-hypertension, anti-diabetes and anti-cancer along with their structure–activity relationship were presented. The future perspective on marine peptide research should focus on finding improved separation and purification technologies with enhanced selectivity and resolution for obtaining more novel peptides with high yield and low cost. In addition, by employing encapsulation strategies such as nanoemulsion and nanoliposome, oral bioavailability and bioactivity of peptides can be greatly enhanced. Also, the potential health benefits that are demonstrated by in vitro and in vivo models should be validated by conducting human clinical trials for a technology transfer from bench to bedside. [ABSTRACT FROM AUTHOR]

The release of persistent and mobile organic chemicals (PMOCs) into the aquatic environment puts the quality of water resources at risk. PMOCs are challenging to analyze in water samples, due to their high polarity. The aim of this study was to develop novel analytical methods for PMOCs and to investigate their occurrence in surface and groundwater samples. The target compounds were culled from a prioritized list of industrial chemicals that were modeled to be persistent, mobile, and emitted into the environment. Analytical screening methods based on mixed-mode liquid chromatography (LC), hydrophilic interaction LC, reversed phase LC, or supercritical fluid chromatography in combination with mass spectrometric detection were successfully developed for 57 target PMOCs and applied to 14 water samples from three European countries. A total of 43 PMOCs were detected in at least one sample, among them 23 PMOCs that have not been reported before to occur in environmental waters. The most prevalent of these novel PMOCs were methyl sulfate, 2-acrylamino-2-methylpropane sulfonate, benzyltrimethylammonium, benzyldimethylamine, trifluoromethanesulfonic acid, 6-methyl-1,3,5-triazine-diamine, and 1,3-di-o-tolylguanidine occurring in ≥50% of the samples at estimated concentrations in the low ng L -1 up to μg L -1 range. The approach of focused prioritization combined with sensitive target chemical analysis proved to be highly efficient in revealing a large suite of novel as well as scarcely investigated PMOCs in surface and groundwater., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

A detailed ionic component record was performed on EPICA Dome C ice core (East Antarctica) to a depth of 3190 m using Ion Chromatography and Fast Ion Chromatography (FIC). At depths greater than 2800 m, the sulfate profile shows intense, sharp spikes which are not expected due to the smoothing of sulfate peaks by diffusion processes. Moreover, these spikes show an "anomalous" chemical composition (e.g., unusually low acidity, high Mg(2+) concentration and high Mg(2+)/Ca(2+) ratio). These peaks and the surrounding layers also exhibit good Mg(2+) vs SO(4)(2-) and Cl(-) vs Na(+) correlations through both glacial and interglacial periods. Furthermore, the high-resolution analysis of two horizontally contiguous ice sections showed that some fraction of the impurities are characterized by a heterogeneous distribution. Altogether, these results suggest the occurrence of long-term postdepositional processes involving a rearrangement of impurities via migration in the vein network, characterized by sulfuric acidity and leading to the formation of soluble particles of magnesium sulfate salts, along with ionic association of ions in the liquid films along boundaries. This evidence should be taken into consideration when inferring information on for rapid climatic and environmental changes from ice core chemical records at great depths. At Dome C, the depth threshold was found to be 2800 m.

The development during the last 15 years and the state-of-the-art in the analysis of bulk steroid hormone drugs and hormone-like structures and pharmaceutical formulations made thereof are summarized. Other steroids (sterols, bile acids, cardiac glycosides, vitamins D) as well as biological-clinical aspects and pharmacokinetic and metabolic studies are excluded from this review. The state-of-the-art is summarized based on comparisons of monographs in the latest editions of the European Pharmacopoeia, United States Pharmacopoeia and the Japanese Pharmacopoeia. This is followed by sections dealing with new developments in the methodology for the fields of spectroscopic and spectrophotometric, chromatographic, electrophoretic and hyphenated techniques as well electroanalytical methods. The review is terminated by two problem-oriented sections: examples on impurity and degradation profiling as well as enantiomeric analysis.

The BCR has undertaken a project to prepare compound-feed reference materials to provide a basis for analytical quality control for this assay. The first phase of the project, an intercomparison of methods for aflatoxin B1 in compounded feedstuffs at a level of ca 15 micrograms/kg is now described. The study involved 24 European laboratories who analysed two pairs of compounded feedstuffs. Each pair of feeds consisted of a contaminated and an almost uncontaminated sample (a near-blank) of otherwise identical composition. The feed pairs differed essentially only in their citrus-pulp and barley contents. The participants used a variety of methods of analysis, including chloroform, methanol-water and acetonitrile-water for extraction, TLC, reversed phase disposable cartridges and immunoaffinity columns for extract clean-up and TLC, HPLC and ELISA in the determinative step. Several performance characteristics were checked and the aflatoxin B1 contents were determined. Recoveries were found to range from approximately 70 to 110%. Coefficients of variation calculated from all the results obtained with the two pairs of contaminated samples were 16 and 19%. The study showed that, when properly applied, a number of methods employing variations in extraction, clean-up and end-method gave results which were in close agreement. It is concluded that there exists a sound basis for the establishment of reference values for the aflatoxin B1 content of compound feed reference materials which have been prepared in this project.