Search

This study presents a detailed characterization of Shredder residues (SR) generated and deposited in Denmark from 1990 to 2010. It represents approximately 85% of total Danish SR. A comprehensive sampling, size fractionation and chemical analysis was carried out on entire samples as well as on each individual size fraction. All significant elemental contents except oxygen were analyzed. The unexplained "balance" was subsequently explained by oxygen content in metal oxides, carbonates, sulphates and in organics, mainly cellulose. Using mass and calorific balance approaches, it was possible to balance the composition and, thereby, estimate the degree of oxidation of elements including metals. This revealed that larger fractions (>10mm, 10-4mm, 4-1mm) contain significant amount of valuable free metals for recovery. The fractionation revealed that the >10mm coarse fraction was the largest amount of SR being 35-40% (w/w) with a metal content constituting about 4-9% of the total SR by weight and the <1mm fine fraction constituted 27-37% (w/w) of the total weight. The lower heat value (LHV) of SR samples over different time periods (1990-2010) was between 7 and 17 MJ/kg, declining with decreasing particle size. The SR composition is greatly dependent on the applied shredding and post shredding processes at the shredding plants causing some variations. There are uncertainties related to sampling and preparation of samples for analyses due to its heterogeneous nature and uncertainties in the chemical analyses results (≈15-25%). This exhaustive characterization is believed to constitute hitherto the best data platform for assessing potential value and feasibility of further resource recovery from SR., (Copyright © 2014. Published by Elsevier Ltd.)

This analysis presents the results of a life cycle assessment (LCA) carried out on six alternative options for the recycling of water at a Danish industrial laundry for workwear. The study focuses on the handling and disposal of the wet residues generated when wastewater is treated for recycling, and in accounting for long-term potential toxicity impacts. The analysed options are a combination of two water-upgrading technologies: biofilter and ultrafiltration, and three residue disposal alternatives: biogas followed by incineration of sludge at local wastewater treatment plant, thermal vitrification treatment for production of vitrified sand, and mineralization in a sludge bed. It is concluded from the results that with the current Danish environmental policy priorities, the environmental impacts of highest priority are the toxicity effects derived from the presence of heavy metals in the residues. Heavy metals originate from the dirt in the workwear that is washed in the laundry. It is further concluded that the studied water treatment technologies satisfy both the need of clean water for recycling and simultaneously help controlling a safe disposal of pollutants by concentration of the residues. The results of the study also confirm the potential of LCA as a decision-support tool for assisting water recycling initiatives and for residue handling management. The handling of residues has been identified as a stage of the water recycling strategy that bears important environmental impacts. This holistic perspective provided by LCA can be used as input for the definition of environmental management strategies at an industrial laundry, and the prioritization of investments to the environmental profile of laundry processes. In this case-study, the results of the LCA are made operational by, for example, selecting the water treatment technology which is associated wih a safe disposal of the wet residue. It is important to bear in mind that such prioritization depends on national boundary conditions. In the case study analysed, the boundary conditions steer the weighing of the environmental impacts, following the current Danish environmental policy priorities.