Search

High‐frequency monitoring of reservoir inundation and water storage changes is crucial for reservoir functionality assessment and hydrological model calibration. Although the integration of optical data with synthetic aperture radar (SAR) backscattering coefficients (backscatters) offers an effective approach, conventional methods struggle to consistently provide accurate retrievals over diverse regions and seasons. In this study, we introduce reservoir‐ and monthly‐specific classification models to enhance the integration of Sentinel‐1 SAR backscatters with optical‐based water dynamics. Our method covers 721 reservoirs with a capacity greater than 0.1 km3 in China during 2017–2021. Furthermore, we leverage multisource satellite altimetry records (e.g., ICESat‐2, CryoSat‐2, and GEDI) and digital elevation models to derive hypsometry relationship (i.e., water level–water area relationship) for reservoirs, enabling the transformation of inundated areas into monthly water storage changes for 662 reservoirs, representing 93% of the total storage capacity of large reservoirs. Validation against in‐situ measurements at 80 reservoirs reveals improved monthly inundated area monitoring compared to existing data sets. Additionally, our reservoir water storage change estimates exhibit an average R2 of 0.79 and a mean relative root mean square error (rRMSE) of 21%. Our findings highlight reservoir water increases from May/June to November and declines in winter–spring in most regions. However, the inter‐annual patterns vary among regions, with increases in Northeast China, the Yellow River basin (YR), and Southwest China, contrasted by declines in Eastern and Northwest China. Inter‐ and intra‐annual variability in reservoir water storage is mainly influenced by natural inflow in Northeast and Northwest China, while anthropogenic factors dominate in the YR, Eastern, and Southwest China. Plain Language Summary: Reservoirs can supply water, control flood and provide electricity. Without high temporal frequency data on inundated area and water storage over a large spatial extent, we could not clearly understand how and to which degree numerous reservoirs have altered the natural water cycle and provided multiple benefits to people all across the world. The development of remote sensing technology has facilitated the long‐term monitoring of inundated areas and water levels of large quantities of reservoirs. However, high‐temporal‐resolution monitoring remains challenging. In this study, by developing a novel method which integrates active microwave remote sensing data with optical remote sensing observations, we largely improved the satellite‐based monthly inundated area and water storage change monitoring at almost all large reservoirs in China. The results reveal distinct seasonal patterns and interannual variations of reservoir water in different regions of China. Specifically, we found that reservoirs in Northeast China, the Yellow River basin, and Southwest China generally expanded, whereas those in Eastern and Northwest China generally shrank during 2017–2021. The climatic and anthropogenic impacts on the inter‐ and intra‐annual variations in reservoir water across different regions were also analyzed. Key Points: A new methodology for integrating synthetic aperture radar backscattering coefficients with optical remote sensing‐based inland surface water dynamics is developedMonthly inundated area and water storage changes of 721 large reservoirs in China during 2017–2021 are retrieved at improved accuracyImpacts of natural climate and human control on the inter‐ and intra‐annual variations in reservoir water across different regions in China are analyzed [ABSTRACT FROM AUTHOR]

The joint action of human activities and environmental changes contributes to the frequent occurrence of landslide, causing major hazards. Using Interferometric Synthetic Aperture Radar (InSAR) technique enables the detailed detection of surface deformation, facilitating early landslide detection. The growing availability of SAR data and the development of artificial intelligence have spurred the integration of deep learning methods with InSAR for intelligent geological identification. However, existing studies using deep learning methods to detect landslides in InSAR deformation often rely on single InSAR data, which leads to the presence of other types of geological hazards in the identification results and limits the accuracy of landslide identification. Landslides are affected by many factors, especially topographic features. To enhance the accuracy of landslide identification, this study improves the existing geological hazard detection model and proposes a multi-source data fusion network termed MSFD-Net. MSFD-Net employs a pseudo-Siamese network without weight sharing, enabling the extraction of texture features from the wrapped deformation data and topographic features from topographic data, which are then fused in higher-level feature layers. We conducted comparative experiments on different networks and ablation experiments, and the results show that the proposed method achieved the best performance. We applied our method to the middle and upper reaches of the Yellow River in eastern Qinghai Province, China, and obtained deformation rates using Sentinel-1 SAR data from 2018 to 2020 in the region, ultimately identifying 254 landslides. Quantitative evaluations reveal that most detected landslides in the study area occurred at an elevation of 2500–3700 m with slope angles of 10–30°. The proposed landslide detection algorithm holds significant promise for quickly and accurately detecting wide-area landslides, facilitating timely preventive and control measures. [ABSTRACT FROM AUTHOR]

The outbreaks of green tide have caused severe harm to the marine environment and human society. Synthetic Aperture Radar (SAR) plays an important role in green tide monitoring by virtue of its high resolution and cloud-free nature. The existing green tide extraction methods still face challenges in identifying multi-scale green tide patches due to noise interference, uneven greyscale and blurred boundaries in SAR images. Meanwhile, the practical application of deep learning methods with high precision is limited due to the complexity of the model and the large amount of computation. Therefore, we propose a multi-scale context-aware and batch-independent lightweight green tide extraction network called MBL-Net. A novel lightweight heterogeneous backbone is designed to extract multi-scale discriminative features and improve segmentation efficiency by using multi-scale selection kernel (MSK) modules and lightweight stages. Meanwhile, Triplet attention module is introduced to improve the internal consistency of the green tide region and suppress the effect of speckle noise. Then, the mixed pooling-based channel prior module (MCPM) is used to expand the receptive field of the network and extract the fine green tide structure by fusing multi-scale features. In addition, Filter Response Normalisation (FRN) is innovatively applied for feature normalization in the decoding stage, eliminating batch dependency. In order to verify the effectiveness of the proposed method, a dataset is built using the Sentinel-1 images of the Yellow Sea, China, from 2019 to 2021. The experimental results show that the proposed method achieves an overall accuracy of 98.59% with 0.970 G FLOPs and 3.525 M parameters, which ensures high precision and improves green tide detection efficiency. Compared with several representative networks, this method can capture more details of green tide with fewer parameters and faster calculation speed. [ABSTRACT FROM AUTHOR]

The accurate prediction of landslide susceptibility relies on effectively handling landslide absence samples in machine learning (ML) models. However, existing research tends to generate these samples in feature space, posing challenges in field validation, or using physics-informed models, thereby limiting their applicability. The rapid progress of interferometric synthetic aperture radar (InSAR) technology may bridge this gap by offering satellite images with extensive area coverage and precise surface deformation measurements at millimeter scales. Here, we propose an InSAR-based sampling strategy to generate absence samples for landslide susceptibility mapping in the Badong–Zigui area near the Three Gorges Reservoir, China. We achieve this by employing a Small Baseline Subset (SBAS) InSAR to generate the annual average ground deformation. Subsequently, we select absence samples from slopes with very slow deformation. Logistic regression, support vector machine, and random forest models demonstrate improvement when using InSAR-based absence samples, indicating enhanced accuracy in reflecting non-landslide conditions. Furthermore, we compare different integration methods to integrate InSAR into ML models, including absence sampling, joint training, overlay weights, and their combination, finding that utilizing all three methods simultaneously optimally improves landslide susceptibility models. [ABSTRACT FROM AUTHOR]

The LuTan-1 (LT-1) mission, China's first civilian bistatic spaceborne Synthetic Aperture Radar (SAR) mission, comprises two L-band SAR satellites. These satellites operate in bistatic InSAR strip map mode, maintaining a formation flight with an adjustable baseline to generate global digital elevation models (DEMs) with high accuracy and spatial resolution. This research introduces a dedicated interferometric calibration model for LT-1, tackling the unique challenges of the bistatic system, such as interferometric parameter coupling and the π -ambiguity problem caused by synchronization phase errors. This study validates the model using SAR images from LT-1 and Xinjiang corner reflector data, achieving interferometric phase accuracy better than 0.1 rad and baseline accuracy better than 2 mm, thereby producing high-precision DEMs with a height accuracy meeting the 5 m requirement. [ABSTRACT FROM AUTHOR]

Global climate change highlights the significance of renewable clean energy. Geothermal energy from oilfields is abundant and can be utilized for residential heating and oil transportation. However, unreasonable heat exchange methods lead to groundwater level decline. Differences and delays between water extraction and reinjection inevitably cause land subsidence, hindering the sustainable utilization of geothermal energy resources. It is crucial to effectively monitor large-scale ground surface deformation characteristics in geothermal fields. In the research, 55 Sentinel-1A images from October 2018 to May 2022 were collected, and the ground deformation of Caofeidian new district in Bohai Bay Basin, where Nanpu Oilfield is located, in North China, was inverted by short baseline subsets-interferometric synthetic aperture radar (SBAS-InSAR) technology. The maximum subsidence velocity in Caofeidian new district exceeded 50 mm/year. Since April 2019, there has been concentrated ground subsidence in the Caofeidian new district, with a maximum cumulative subsidence exceeding 50 mm. The maximum cumulative subsidence exceeded 150 mm by May 2022. Combined with pumping and recharging tests near heating project in Caofeidian new district, the temporal subsidence mechanisms were revealed. The water extraction from the thermal reservoir caused drainage consolidation of the strata, triggering rapid subsidence in November. In April, discrepancy between water extraction and reinjection flow rate in thermal reservoir caused drainage consolidation of the strata, further exacerbating the subsidence trend. During rainy seasons, despite water reinjection and groundwater replenishment from precipitation, the strata in the Caofeidian new district underwent irreversible plastic deformation, with a slow rebound process, lagging behind urban areas without geothermal development by one month. InSAR is a reliable technology for understanding the ground deformation process in geothermal fields. Clarifying the subsidence mechanisms guides the selection of water-heat exchange methods, ensuring the sustainable development of geothermal resources. [ABSTRACT FROM AUTHOR]

Landslides are widely distributed mountainous geological hazards that threaten economic development and people's daily lives. Interferometric synthetic aperture radar (InSAR) with comprehensive coverage and high‐precision ground displacement monitoring abilities are frequently utilized for regional‐scale active slope detection. Moreover, InSAR measurements that characterize ground dynamics are integrated with conventional topographic, hydrological, and geological landslide conditioning factors (LCFs) for landslide susceptibility mapping (LSM). Weining County in southwest China, with complex geological conditions, steep terrain, and frequent tectonic activities, is prone to catastrophic landslide failures. In this study, we refined the landslide inventory of Weining County using one ascending and one descending Sentinel‐1 dataset acquired during 2015–2021 through a small baseline subset InSAR (SBAS InSAR) analysis. We then combine the LOS measurements from both datasets using multidimensional SBAS to obtain time series two‐dimensional (2D) displacements to characterize the kinematics of active slopes. Hot spot and cluster analysis (HCA) was carried out on 2D displacement rate maps to highlight clustered deformed areas and suppress noisy signals that occurred on single pixels. Two hundred fifty‐eight landslides (including 71 active identified in this study) are used to construct 76,412 positive samples for LSM. In our study, the HCA maps, instead of the 2D displacement maps, are integrated with conventional LCFs to form an LCF_HCA set to feed support vector machine (SVM), Random Forest (RF), extreme Gradient Boosting (XGBoost) and Light Gradient‐Boosting Machine (LightGBM) models. A conventional LCF (LCF_CON) set and an integrated 2D displacement maps (LCF_2D) set have also been adapted for comparison. The performance of the tree‐based ensemble methods distinctly outperforms the SVM model. In the meantime, models' performances using the LCF_HCA set are superior to that of the other 2 LCF sets from all evaluation metrics. The ranks of HCA maps increased compared with 2D displacement maps from feature importance analysis, which might lead to the better performance of models using the LCF_HCA set. With the continuous accumulation of SAR images, ground dynamic characteristics from InSAR can offer us opportunities to understand landslide kinematics and enhance LSM. [ABSTRACT FROM AUTHOR]

Time series dynamic prediction of surface deformation in mining areas can provide reference data for coal mine safety and production, which has important impacts. The combination of interferometric synthetic aperture radar (InSAR) technology and the probability integral method (PIM) is commonly used for predicting deformation. However, most surface subsidence prediction in mining areas is based on the static PIM parameters, failing to achieve the three-dimensional (3D) dynamic deformation prediction. This paper proposed a 3D deformation dynamic prediction model (InSAR-3D-CTPIM) between InSAR deformation observations and dynamic coordinate-time PIM (CTPIM) parameters, which can realize the prediction of east–west, north–south, and vertical series deformation caused by mining. The method has been validated by simulation experiments and real experiments in the mining area of Jiansheng Coal Mine in Baisha Reservoir, Henan Province, China. The results showed that the modeling accuracy was improved by 34.3% compared to the traditional multi-rate model, and the accuracy was improved by 28.5% compared to the vertical deformation obtained by the traditional static PIM method. The InSAR-3D-CTPIM model can be used to predict the evolutionary history of basin-wide surface deformation dynamics in coal mining areas, and provide a reference for the early warning and prediction of geological hazards in coal mining areas. [ABSTRACT FROM AUTHOR]

Improving the accuracy of zenith tropospheric delay (ZTD) models is an important task. However, the existing ZTD models still have limitations, such as a lack of appropriate vertical adjustment function and being unsuitable for China, which has a complex climate and great undulating terrain. A new approach that considers the time-varying vertical adjustment and delicate diurnal variations of ZTD was introduced to develop a new grid ZTD model (NGZTD). The NGZTD model employed the Gaussian function and considered the seasonal variations of Gaussian coefficients to express the vertical variations of ZTD. The effectiveness of vertical interpolation for the vertical adjustment model (NGZTD-H) was validated. The root mean squared errors (RMSE) of the NGZTD-H model improved by 58% and 22% compared to the global pressure and temperature 3 (GPT3) model using ERA5 and radiosonde data, respectively. The NGZTD model's effectiveness for directly estimating the ZTD was validated. The NGZTD model improved by 22% and 31% compared to the GPT3 model using GNSS-derived ZTD and layered ZTD at radiosonde stations, respectively. Seasonal variations in Gaussian coefficients need to be considered. Using constant Gaussian coefficients will generate large errors. The NGZTD model exhibited outstanding advantages in capturing diurnal variations and adapting to undulating terrain. We analyzed and discussed the main error sources of the NGZTD model using validation of spatial interpolation accuracy. This new ZTD model has potential applications in enhancing the reliability of navigation, positioning, and interferometric synthetic aperture radar (InSAR) measurements and is recommended to promote the development of space geodesy techniques. [ABSTRACT FROM AUTHOR]

In the early stages, uncontrolled groundwater extraction led to the Hangjiahu (HJH) Plain becoming one of the areas with the most severe land subsidence in China. Since the beginning of this century, comprehensive measures have been taken to control the continuous aggravation of large land subsidence patterns in some areas; however, urban land subsidence issues, influenced by various factors, still persist and exhibit complex geographical distribution characteristics. In this study, we utilized Sentinel-1A images and the SBAS-InSAR technique to capture surface deformation over the HJH Plain in Zhejiang from 16 March 2017 to 20 January 2023. Through a comparative analysis with geological conditions, changes in surface mass loading, rainfall and groundwater, and land use types, we discussed the contributions of natural and anthropogenic factors to land subsidence. Augmented with optical remote sensing images and field investigations, we conducted a correlation analysis of the land subsidence status. The preliminary findings suggest that changes in surface mass loading and short-term heavy rainfall under extreme weather conditions can lead to periodic land subsidence changes in the region. Additionally, extensive infrastructure construction triggered by urbanization has resulted in significant and sustained land subsidence deformation. The research findings play an important guiding role in formulating scientifically effective strategies for land subsidence prevention and control, as well as urban planning and construction. [ABSTRACT FROM AUTHOR]

Excluding rough areas with surface rocks and craters is critical for the safety of landing missions, such as China's Chang'e-7 mission, in the permanently shadowed region (PSR) of the lunar south pole. Binned digital elevation model (DEM) data can describe the undulating surface, but the DEM data can hardly detect surface rocks because of median-averaging. High-resolution images from a synthetic aperture radar (SAR) can be used to map discrete rocks and small craters according to their strong backscattering. This study utilizes the You Only Look Once version 7 (YOLOv7) tool to detect varying-sized craters in SAR images. It also employs the Markov random field (MRF) algorithm to identify surface rocks, which are usually difficult to detect in DEM data. The results are validated by optical images and DEM data in non-PSR. With the assistance of the DEM data, regions with slopes larger than 10° are excluded. YOLOv7 and MRF are applied to detect craters and rocky surfaces and exclude regions with steep slopes in the PSRs of craters Shoemaker, Slater, and Shackleton, respectively. This study proves SAR images are feasible in the selection of landing sites in the PSRs for future missions. [ABSTRACT FROM AUTHOR]

The Pubugou dam is located on the Dadu River in China, with a height of 186 m. The fracturing body at 780 m upstream of its right bank poses a major threat to the downstream reservoir area's safety as well as the operation of the dam. In this study, a multi-source three-dimensional monitoring mode of space-ground-body is built using synthetic aperture radar, surface sensing, and rock mass stress monitoring. This makes it possible to keep an eye on the entire fracturing body in real time. This study proposes a GCPs selection method that combines the high coherence, small deformation reference points obtained by PS-InSAR inversion and stable deformation points, and realizes the high-precision bank slope deformation time series data acquisition method. It addresses the issue of strong subjectivity in the selection of ground control points (GCPs) in the SBAS-InSAR solution process in mountainous areas. The change in multiple scattering wave velocity and the evolution of the rock mass state inside the slope are both extracted using the seismic background noise cross-correlation technique. Through time series analysis and comparison of various monitoring data, the three-dimensional deformation characteristics, instability mechanism, and significant influence of rainfall on the deformation development of the fracturing body are summarized. Additionally, the adaptability, advantages, and disadvantages of various monitoring modes are evaluated. For the crucial slope of the project, a more trustworthy monitoring method will be available thanks to the mutual integration of the space-ground-body monitoring mode and data. [ABSTRACT FROM AUTHOR]

Monitoring slow-moving landslides in densely vegetated areas using X-band Synthetic Aperture Radar (SAR) data posed challenges due to the dramatic loss of coherence during SAR interferometry and the relative lower precision of sub-pixel offset tracking (SPOT). The mountainous Three Gorges Reservoir Area (TGRA) in China is a landslide-prone region with unique hydrogeological conditions, where riparian slopes are mostly covered with dense vegetation. Here, we explore the potential of utilizing temporal stacking to improve SPOT (TS-SPOT) for mitigating background noise and enhancing the continuous deformation signal of natural scatterers on densely vegetated slopes. By leveraging redundant information in multiple offset maps, TS-SPOT demonstrates enhanced measurement capability, offering more precise velocity estimations and extended velocity field coverage than single pair-wise SPOT. The ability of the proposed method is illustrated for two large-scale, slow-moving reservoir landslides in the TGRA, the Outang and Xinpu landslides, for which TerraSAR-X High-resolution Spotlight (TSX-HS) images and GNSS measurements, and ground truth data are available. The monitoring results revealed a maximum of 40 and 10 cm/year average deformation rates along the azimuth and range direction, respectively. This study demonstrates a powerful and efficient method for monitoring slow-moving landslides in vegetated terrain. [ABSTRACT FROM AUTHOR]

The PIESAT-01 constellation is the world's first multi-baseline distributed synthetic aperture radar (SAR) constellation with a "Cartwheel" formation. The "Cartwheel" formation is a unique formation in which four satellites fly in companion orbits, ensuring that at any given moment, the main satellite remains at the center, with three auxiliary satellites orbiting around it. Due to this unique configuration of the PIESAT-01 constellation, four images of the same region and six pairs of baselines can be obtained with each shot. So far, there has been no imaging and interference research based on four-satellite constellation measured data, and there is an urgent need to explore algorithms for the "Cartwheel" configuration imaging and digital surface model (DSM) production. This paper introduces an improved bistatic SAR imaging algorithm under the four-satellites interferometric mode, which solves the problem of multi-orbit nonparallelism in imaging while ensuring imaging coherence and focusing ability. Subsequently, it presents an interferometric processing method for the six pairs of baselines, weighted fusion based on elevation ambiguity from different baselines, to obtain a high-precision DSM. Finally, this paper selects the Dingxi region of China and other regions with diverse terrains for imaging and DSM production and compares the DSM results with ICESat-2 global geolocated photon data and TanDEM DSM data. The results indicate that the accuracy of PIESAT-01 DSM meets the standards of China's 1:50,000 scale and HRTI-3, demonstrating a high level of precision. Moreover, PIESAT-01 data alleviate the reliance on simulated data for research on multi-baseline imaging and multi-baseline phase unwrapping algorithms and can provide more effective and realistic measured data. [ABSTRACT FROM AUTHOR]

The periodic storage and release of water in reservoirs have the potential to accelerate deformation or trigger ancient landslides. Interferometric synthetic aperture radar (InSAR) technology, renowned for its wide coverage and high precision, has emerged as an effective technique for the identification and monitoring of landslides. This study utilized spaceborne InSAR technology to identify and interpret landslides in the Liujiangxia reservoir area in China, leading to the detection of a total of 20 landslides. Moreover, among these 20 landslides, the landslide with substantial deformation (LJX02) was chosen, and the wavelet quantitative analysis technique was employed to investigate the correlation and time lag between various elevation positions of this landslide, the reservoir water level, and rainfall. The study successfully demonstrated that the deformation of the landslide lagged behind the reservoir water level by 152.10-182.50 days (from low to high elevation) and was delayed by 45.60-68.44 days compared to rainfall (from high to low elevation). [ABSTRACT FROM AUTHOR]

Copyright of Hydrogeology Journal is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Remote sensing (RS) technologies are extensively exploited by scientists and a vast audience of local authorities, urban managers, and city planners. Coastal regions, geohazard-prone areas, and highly populated cities represent natural laboratories to apply RS technologies and test new methods. Over the last decades, many efforts have been spent on improving Earth's surface monitoring, including intensifying Earth Observation (EO) operations by the major national space agencies. They oversee to plan and make operational constellations of satellite sensors providing the scientific community with extensive research and development opportunities in the geoscience field. For instance, within this framework, the European Space Agency (ESA) and the Ministry of Science and Technology of China (MOST) have sponsored, since the early 2000s, the DRAGON initiative jointly carried out by the European and Chinese RS scientific communities. This manuscript aims to provide a synthetic overview of some research activities and new methods recently designed and applied and trace the route for further developments. The main findings are related to i) the analysis of flood risk in China, ii) the potential of new methods for the estimation and removal of ground displacement biases in small-baseline oriented interferometric Synthetic Aperture Radar (SAR) methods, iii) the analysis of the inundation risk in low-lying regions using coherent and incoherent SAR methods; and iv) the use of SAR-based technologies for marine applications. [ABSTRACT FROM AUTHOR]

In this paper, the Multi-Temporal Interferometric Synthetic Aperture Radar (MT-InSAR) technology is adopted to monitor the Line of Sight (LOS) displacement of Fushun West Opencast Coal Mine (FWOCM) and its surrounding areas in northeast China using Sentinel-1 Synthetic Aperture Radar (SAR) images acquired from 2018 to 2022. The spatial-temporal evolution of urban subsidence and the south-slope landslide are both analyzed in detail. Comparison with ground measurements and cross-correlation analysis via cross wavelet transform with monthly precipitation data are also conducted, to analyze the influence factors of displacements in FWOCM. The monitoring results show that a subsidence basin appeared in the urban area near the eastern part of the north slope in 2018, with settlement center located at the intersection of E3000 and fault F1. The Qian Tai Shan (QTS) landslide on the south slope, which experienced rapid sliding during 2014 to 2016, presents seasonal deceleration and acceleration with precipitation, with the maximum displacement in vicinity of the Liushan paleochannel. The results of this paper have fully taken in account for the complications of large topographic relief, geological conditions, spatial distribution and temporal evolution characteristics of surface displacements in opencast mining area. The wide range and long time series dynamic monitoring of opencast mine are of great significance to ensure mine safety production and geological disaster prevention in the investigated mining area. [ABSTRACT FROM AUTHOR]

The forest canopy active fuel load (CAFL) is easily flammable that is usually consumed in the flaming front, and is a critical factor in crown fire early prediction, suppression and response. Previous studies universally relied on optical remote sensing data, whose effectiveness is extremely limited in regions with cloud cover and haze, such as the southwest of Sichuan, China. Synthetic aperture radar (SAR) can work 24 h and is not affected by weather conditions. This study aims to evaluate the potential of volume backscattering coefficients extracted through decomposition of polarimetric SAR (PolSAR, Radarsat-2 C band) for CAFL estimation. The polarimetric decomposition method used in this study was based on Freeman-Durden decomposition. The separated volume backscattering coefficients were used to estimate CAFL based on the variant of the extended water cloud model (VEWCM). For comparison, the SAR raw observations and extended water cloud model (EWCM) were also used to estimate CAFL. The performance of these two models was validated through quantitative assessment, utilizing CAFL measurements obtained from southwest Sichuan and the leave-one-out cross-validation method. Results show that the VEWCM (R2 = 0.69, RMSE = 0.87 tons/ha) performed better than EWCM (R2 = 0.60, RMSE = 1.48 tons/ha) especially in HV polarization. We concluded that PolSAR has the potential to improve CAFL estimation and further assist with pre-fire risk warnings, fire suppression responses, and post-fire effects assessment. [ABSTRACT FROM AUTHOR]

Characterizing the coseismic slip behaviors of earthquakes could offer a better understanding of regional crustal deformation and future seismic potential assessments. On 18 December 2023, an Mw 6.0 earthquake occurred on the Lajishan–Jishishan fault system (LJFS) in the northeastern Tibetan Plateau, causing serious damage and casualties. The seismogenic fault hosting this earthquake is not well constrained, as no surface rupture was identified in the field. To address this issue, in this study, we use Interferometric Synthetic Aperture Radar (InSAR) data to investigate the coseismic surface deformation of this earthquake and invert both ascending and descending line-of-sight observations to probe the seismogenic fault and its slip characteristics. The InSAR observations show up to ~6 cm surface uplift caused by the Jishishan earthquake, which is consistent with the thrust-dominated focal mechanism. A Bayesian-based dislocation modeling indicates that two fault models, with eastern and western dip orientations, could reasonably fit the InSAR observations. By calculating the coseismic Coulomb failure stress changes (∆CFS) induced by both fault models, we find that the east-dipping fault scenario could reasonably explain the aftershock distributions under the framework of stress triggering, while the west-dipping fault scenario produced a negative ∆CFS in the region of dense aftershocks. Integrating regional geological structures, we suggest that the seismogenic fault of the Jishishan earthquake, which strikes NNE with a dip of 56° to the east, may be either the Jishishan western margin fault or a secondary buried branch. The optimal finite-fault slip modeling shows that the coseismic slip was dominated by reverse slip and confined to a depth range between ~5 and 15 km. The released seismic moment is 1.61 × 1018 N·m, which is equivalent to an Mw 6.07 earthquake. While the Jishishan earthquake ruptured a fault segment of approximately 20 km, it only released a small part of the seismic moment that was accumulated along the 220 km long Lajishan–Jishishan fault system. The remaining segments of the Lajishan–Jishishan fault system still have the capability to generate moderate-to-large earthquakes in the future. [ABSTRACT FROM AUTHOR]

The continuous downward movement exhibited by the Lashagou landslide group in recent years poses a significant threat to the safety of both vehicles and pedestrians traversing the highway G310. By integrating geomorphological interpretation using multi-temporal optical images, interferometric synthetic aperture radar (InSAR) measurements, and continuous global navigation satellite system (GNSS) observations, this paper traced the formation period of the Lashagou landslide group, and explored its kinematic behavior under external drivers such as rainfall and snowmelt. The results indicate that the formation period can be specifically categorized into three periods: before, during, and after the construction of highway G310. The construction of highway G310 is the direct cause and prerequisite for the formation of the Lashagou landslide group, whereas summer precipitation and spring snowmelt are the external driving factors contributing to its continuous downward movement. Additionally, both the long-term seasonal downslope movement and transient acceleration events are strongly controlled by rainfall, and there is a time lag of approximately 1–2 days between the transient acceleration and heavy rainfall events. This study highlights the benefits of leveraging multi-source remote sensing data to investigate slow-moving landslides, which is advantageous for the implementation of effective control and engineering intervention to mitigate potential landslide disasters. [ABSTRACT FROM AUTHOR]

Deformation along a subway rail network is related to the safe operation of the subway and the stability of construction facilities on the surface, making long-term deformation monitoring imperative. Long-term monitoring of surface deformation along the subway network and statistical analysis of the overall deformation situation are lacking in China. Therefore, targeting 35 Chinese cities whose subway mileage exceeds 50 km, we extracted their surface deformation along subway networks between 2018 and 2022, using spaceborne synthetic aperture radar (SAR) interferometry (InSAR) technology and Sentinel-1 satellite data. We verified the results with the continuous global navigation satellite system (GNSS) stations' data and found that the root mean square error (RMSE) of the InSAR results was 3.75 mm/year. Statistical analysis showed that ground subsidence along the subways was more prominent in Beijing, Tianjin, and other areas in the North China Plain, namely Kunming (which is dominated by karst landforms), as well as Shanghai, Guangzhou, Qingdao, and other coastal cities. In addition, an analysis revealed that the severity of surface subsidence correlated positively with a city's gross domestic product (GDP) with a Pearson correlation of 0.787, since the higher the GDP, the more frequent the construction and maintenance of subway, and the more commuters there are, which in turn exacerbates the disturbance to the surface. Additionally, the type of land cover also affects the ground deformation. Our findings provide a reference for constructing, operating, and maintaining the urban subway systems in China. [ABSTRACT FROM AUTHOR]

On February 22, 2023, a devastating landslide occurred on the mining slope of an open-pit coal mine in Inner Mongolia, China, leading to the mining area being buried and 53 fatalities. The source area of the landslide measured approximately 500 m in both length and width, with an estimated volume of the deposited material reaching approximately 5 million cubic metres. Based on the severe impact of this incident, our study conducted preliminary research using a combination of methodologies, including particle image analysis, synthetic aperture radar interferometry, interpretation of optical remote sensing data, and post-event news reports analysis. The results indicated that the landslide lasted 23 s from initiation to cessation of movement. The historical deformation indicated that prior to the resumption of the mining activities, only localized deformation was observed at the rear edge of the landslide. However, when mining activities resumed in April 2021 and extended to the vicinity of the north slope, the deformation range and rate in the source area of the landslide rapidly increased. The investigation deduced that the soft foundation at the slope bottom and mining activities are the primary causative factors of this event. Mining activities, which stripped coal seams within the slope and surface rock masses, led to the expansion of tension cracks within the landslide body, weakening resisting forces at the leading edge and thus playing a significant role in destabilizing the landslide body. The evolution of the landslide from incubation to instability could be divided into four stages: early microcrack development, slow creep, accelerated deformation after resumption of mining, and ultimate instability. Therefore, it is of great significance to advance real-time deformation monitoring and early warning systems specifically those designed for mining slope areas by comprehensive measures. Furthermore, enhancing the high-frequency monitoring capabilities of synthetic aperture radar satellites is crucial to reducing the occurrence of these catastrophic events. [ABSTRACT FROM AUTHOR]

China’s massive wave of urbanization may be threatened by land subsidence. Using a spaceborne synthetic aperture radar interferometry technique, we provided a systematic assessment of land subsidence in all of China’s major cities from 2015 to 2022. Of the examined urban lands, 45% are subsiding faster than 3 millimeters per year, and 16% are subsiding faster than 10 millimeters per year, affecting 29 and 7% of the urban population, respectively. The subsidence appears to be associated with a range of factors such as groundwater withdrawal and the weight of buildings. By 2120, 22 to 26% of China’s coastal lands will have a relative elevation lower than sea level, hosting 9 to 11% of the coastal population, because of the combined effect of city subsidence and sea-level rise. Our results underscore the necessity of enhancing protective measures to mitigate potential damages from subsidence. [ABSTRACT FROM AUTHOR]

Arid zone grassland is a crucial component of terrestrial ecosystems and plays a significant role in ecosystem protection and soil erosion prevention. However, accurately mapping grassland spatial information in arid zones presents a great challenge. The accuracy of remote sensing grassland mapping in arid zones is affected by spectral variability caused by the highly diverse landscapes. In this study, we explored the potential of a rectangular tile classification model, constructed using the random forest algorithm and integrated images from Sentinel-1A (synthetic aperture radar imagery) and Sentinel-2 (optical imagery), to enhance the accuracy of grassland mapping in the semiarid to arid regions of Ordos, China. Monthly Sentinel-1A median value images were synthesised, and four MODIS vegetation index mean value curves (NDVI, MSAVI, NDWI and NDBI) were used to determine the optimal synthesis time window for Sentinel-2 images. Seven experimental groups, including 14 experimental schemes based on the rectangular tile classification model and the traditional global classification model, were designed. By applying the rectangular tile classification model and Sentinel-integrated images, we successfully identified and extracted grasslands. The results showed the integration of vegetation index features and texture features improved the accuracy of grassland mapping. The overall accuracy of the Sentinel-integrated images from EXP7-2 was 88.23%, which was higher than the accuracy of the single sensor Sentinel-1A (53.52%) in EXP2-2 and Sentinel-2 (86.53%) in EXP5-2. In all seven experimental groups, the rectangular tile classification model was found to improve overall accuracy (OA) by 1.20% to 13.99% compared to the traditional global classification model. This paper presents novel perspectives and guidance for improving the accuracy of remote sensing mapping for land cover classification in arid zones with highly diverse landscapes. The study presents a flexible and scalable model within the Google Earth Engine framework, which can be readily customized and implemented in various geographical locations and time periods. [ABSTRACT FROM AUTHOR]

Recurrence of large-scale ancient landslides often manifests as catastrophic events, so it is important to assess their stability by monitoring the deformation process. In this study, the Da'ao ancient landslide along the Jinsha River in China was investigated and analyzed. Field investigation showed that the landslide body is being experienced deforming with many new failures. Three sliding events can be identified according to different main scarps. The Permanent Scatterer Synthetic Aperture Radar Interferometry (PS-InSAR) data further revealed that the most obvious deforming area is in the middle and toe part of the sliding body with the largest cumulative displacement of 55 mm during 2017 to 2021. Additionally, the relatively stable zone and the accelerating deforming zone are divided by displacement rate. This indicates that the Da'ao landslide is becoming unstable. At the same time, the Particle Flow Code (PFC) simulation verified that the risk of landslide recurrence is likely when subjected to strong earthquakes or heavy rainfall, and the resulting sidings could dam the Jinsha River. In addition, the analysis results suggested that the displacement rates were approximately 5 mm/year and 13.3 mm/year before and after the Ms 5.2 earthquake, respectively, which occurred on 04/21/2019. The deformation changed with seasonal variation during 2017–2021 and lagged behind precipitation, while the earthquake can increase the amount and rate of displacement. The results presented here can help us to understand how landslides recur over time and their deformation and failure mechanisms, which is useful for disaster prevention and mitigation. [ABSTRACT FROM AUTHOR]

In eastern Qinghai Province, China, landslides are a frequent hazard, yet their large-scale monitoring and assessment are under-researched. This study utilized 31 Sentinel-1A satellite images from January 4, 2020, to August 9, 2022, and applied the Small Baseline Subset Interferometry Synthetic Aperture Radar (SBAS-InSAR) method to quantify surface subsidence and infer landslide deformation rates in the Loess Plateau. We identified 491 hazardous landslides, with 14 posing significant risks to the Yellow River, major highways, and over 10,000 residents. The average line-of-sight (LOS) surface displacement rate was 118 mm/year, peaking at 298 mm. Satellite imagery revealed rapid and continuous landslide front activity. The landslides' uneven distribution aligns with the area's complex geology and environment, predominantly occurring on 20°–40° slopes with the Normalized Difference Vegetation Index values below 0.3, and aligning with nearby faults in the Hualong basin. Detailed analysis of 14 key landslides showed a marked correlation between landslide movement and monthly precipitation, offering new insights into landslide deformation mechanisms and driving factors. [ABSTRACT FROM AUTHOR]

Deformation monitoring plays a pivotal role in assessing dam safety. Interferometric Synthetic Aperture Radar (InSAR) has the advantage of obtaining an extensive range of deformation, regardless of weather conditions. The Datengxia Water Conservancy Hub is the largest in-construction dam in China. To effectively assess the in-construction dam safety, the SBAS-InSAR (Small Baseline Subset-InSAR) technique and 86 Sentinel-1 images (from 11 February 2020, to 16 January 2023) have been employed in this study to monitor the deformation over the reservoir and its surrounding areas. The reliability of the SBAS-InSAR monitoring results over the study area was demonstrated by the in situ monitoring results. And the InSAR results show that the central section of the left dam exhibits the most substantial cumulative deformation, attributed to the maximal water pressure. This is closely followed by the left end of the dam, which reflects a similar but smaller deformation. However, the in-construction cofferdam facilities make the right-end section of the left dam more robust, and the deformation is the most stable. Additionally, significant deformation of the auxiliary dam slope has been identified. Moreover, the analysis indicated that the deformation of the four upstream slopes is closely related to the precipitation, which potentially poses a threat to the safety of the Datengxia Dam. [ABSTRACT FROM AUTHOR]

In recent years, photovoltaic power generation and greenhouse planting (PPG&GP) have become effective approaches for reconstructing and restoring the ecological environment of old coal-mining industry bases, such as Xintai City. However, the ecological impacts or improvements of the PPG&GP projects and their daily operations on the local environment are still unclear. To solve these problems, this study retrieved the ground deformation velocities and time series of the study region by performing the Small-Baseline Subset (SBAS)-Interferometric Synthetic Aperture Radar (InSAR) technique on the Advanced Land Observing Satellite (ALOS) PALSAR and Sentinel-1 SAR datasets. With these deformation results, the spatial analysis indicated that the area of the subsidence region within the PPG&GP projects reached 10.70 km2, with a magnitude of approximately −21.61 ± 12.10 mm/yr. Also, even though the ground deformations and their temporal changes were both visible in the construction and operation stages of the PPG&GP projects, the temporal analysis demonstrated that most observation points finally entered into the stationary phases in the late stage of the observation period. This phenomenon validated the effectiveness of the PPG&GP projects in enhancing the ground surface stability in coal-mining areas. Additionally, the precipitation, geological structure, increased coal-mining depths, and emergent agricultural modes were assumed to be the major impact factors controlling the ground deformation within the local PPG&GP projects. Finally, a novel risk assessment method with a designed index of IRA was utilized to classify the ground subsidence risks of the PPG&GP projects into three levels: Low (69.7%), Medium (16.9%), and High (9.4%). This study sheds a bright light on the ecological monitoring and risk management of the burgeoning industrial and agricultural infrastructures, such as the PPG&GP projects, constructed upon the traditional coal-mining areas in China from a multi-temporal InSAR perspective. [ABSTRACT FROM AUTHOR]

The accurate estimation of forest aboveground biomass is of great significance for forest management and carbon balance monitoring. Remote sensing instruments have been widely applied in forest parameters inversion with wide coverage and high spatiotemporal resolution. In this paper, the capability of different remote-sensed imagery was investigated, including multispectral images (GaoFen-6, Sentinel-2 and Landsat-8) and various SAR (Synthetic Aperture Radar) data (GaoFen-3, Sentinel-1, ALOS-2), in aboveground forest biomass estimation. In particular, based on the forest inventory data of Hangzhou in China, the Random Forest (RF), Convolutional Neural Network (CNN) and Convolutional Neural Networks Long Short-Term Memory Networks (CNN-LSTM) algorithms were deployed to construct the forest biomass estimation models, respectively. The estimate accuracies were evaluated under the different configurations of images and methods. The results show that for the SAR data, ALOS-2 has a higher biomass estimation accuracy than the GaoFen-3 and Sentinel-1. Moreover, the GaoFen-6 data is slightly worse than Sentinel-2 and Landsat-8 optical data in biomass estimation. In contrast with the single source, integrating multisource data can effectively enhance accuracy, with improvements ranging from 5% to 10%. The CNN-LSTM generally performs better than CNN and RF, regardless of the data used. The combination of CNN-LSTM and multisource data provided the best results in this case and can achieve the maximum R2 value of up to 0.74. It was found that the majority of the biomass values in the study area in 2018 ranged from 60 to 90 Mg/ha, with an average value of 64.20 Mg/ha. [ABSTRACT FROM AUTHOR]

Two-dimensional phase unwrapping (2-D PU) is vital for reconstructing Earth's surface topography and displacement from interferometric synthetic aperture radar (InSAR) data. Conventional algorithms rely on the postulate, but this assumption is often insufficient due to abrupt topographic changes and severe noise. To address this challenge, our research proposes a novel approach utilizing deep convolutional neural networks inspired by the U-Net architecture to estimate phase gradient information. Our approach involves downsampling the input data to extract crucial features, followed by upsampling to restore spatial resolution. We incorporate two attention mechanisms—feature pyramid attention (FPA) and global attention upsample (GAU)—and a residual structure in the network's structure. Thus, we construct ResDANet (residual and dual attention net). We rigorously train ResDANet utilizing simulated datasets and employ an L1-norm objective function to minimize the disparity between unwrapped phase gradients and those calculated by ResDANet, yielding the final 2-D PU results. The network is rigorously trained using two distinct training strategies and encompassing three types of simulated datasets. ResDANet exhibits excellent robust performance and efficiency on simulated data and real data, such as China's Three Gorges and an Italian volcano. [ABSTRACT FROM AUTHOR]

The time-effective mapping of erosion gullies is crucial for monitoring and early detection of developing erosional progression. However, current methods face challenges in obtaining large-scale erosion gully networks rapidly due to limitations in data availability and computational complexity. This study developed a rapid method for extracting erosion gully networks by integrating interferometric synthetic aperture radar (InSAR) and the relative elevation algorithm (REA) within the Huangfuchuan Basin, a case basin in the northern Loess Plateau, China. Validation in the study area demonstrated that the proposed method achieved an F1 score of 81.94%, representing a 9.77% improvement over that of the reference ASTER GDEM. The method successfully detected small reliefs of erosion gullies using the InSAR-refined DEM. The accuracy of extraction varied depending on the characteristics of the gullies in different locations. The F1 score showed a positive correlation with gully depth (R2 = 0.62), while the fragmented gully heads presented a higher potential of being missed due to the resolution effect. The extraction results provided insights into the erosion gully networks in the case study area. A total of approximately 28,000 gullies were identified, exhibiting pinnate and trellis patterns. Most of the gullies had notable intersecting angles exceeding 60°. The basin's average depth was 64 m, with the deepest gully being 140 m deep. Surface fragmentation indicated moderate erosive activity, with the southeastern loess region showing more severe erosion than the Pisha sandstone-dominated central and northwestern regions. The method described in this study offers a rapid approach to map gullies, streamlining the workflow of erosion gully extraction and enabling efficiently targeted interventions for erosion control efforts. Its practical applicability and potential to leverage open-source data make it accessible for broader application in similar regions facing erosion challenges. [ABSTRACT FROM AUTHOR]

Accurate retrieval of forest above ground biomass (AGB) based on full-polarization synthetic aperture radar (PolSAR) data is still challenging for complex surface regions with fluctuating terrain. In this study, the three-step process of radiometric terrain correction (RTC), which includes polarization orientation angle correction (POAC), effective scattering area correction (ESAC), and angular variation effect correction (AVEC), is adopted as the technical framework. In the ESAC stage, a normalized correction factor is introduced based on local incidence angle and radar incidence angle to achieve accurate correction of PolSAR data information and improve the inversion accuracy of forest AGB. In order to verify the validity and robustness of this research method, the full-polarization SAR data of ALOS-2 and the ground measured AGB data collected in the Saihanba research area in 2020 were used for experiments. Our findings revealed that in the ESAC phase, the introduction of the normalized correction factor can effectively eliminate the ESA phenomenon and improve the correlation coefficients of the backscatter coefficient and AGB. Taking the data of 25 July 2020 as an example, ESAC increases the correlation coefficients between AGB and the backscattering coefficients of HH, HV, and VV polarization channels by 0.343, 0.296, and 0.382, respectively. In addition, the RTC process has strong robustness in different AGB statistical models and different date PolSAR data. [ABSTRACT FROM AUTHOR]

Expanding open-pit mining towards larger mining scales and greater stripping depths increases the potential risks of landslides on high and steep slopes, endangering human life and property. Therefore, it is of great significance to accurately reveal the main controlling factors and identify the key dynamic parameters to understand the formation mechanism and dynamic process of landslides in open-pit mine landslides. On February 22, 2023, a catastrophic landslide occurred at the Xinjing Open-Pit Coal Mine in the Alxa League of Inner Mongolia, resulting in 53 fatalities, 6 injuries, and economic losses of up to 204.3 million RMB. This study analyzed the formation mechanism of the Xinjing landslide based on remote sensing image interpretation, meteorological and seismic data, and geological and hydrological conditions. The results show that the dominant causes are excavation activities and rear-end slag loading, with the disaster formation process including the excavation disturbance, over-mining deformation, and failure and sliding, characterized by the formation of artificial slopes, deformation of high and steep slopes due to over-mining and coal stripping, and failure induced by external disturbance, respectively. In addition, the source location, dynamic evolution, and key kinematic parameters of the landslide were determined based on the seismic signal inversion. The inversion results show that the landslide has a volume of approximately 6.88 × 106 m3, the main sliding process lasts 35 s with a maximum velocity of 13.7 m/s, and the horizontal displacement is 165 m. [ABSTRACT FROM AUTHOR]

Mountainous landscapes affected by strong earthquakes typically exhibit higher landslide susceptibility in post‐seismic periods compared to pre‐seismic conditions. This concept is referred to as the earthquake legacy effect, which needs to be better understood to develop an accurate post‐seismic landslide hazard assessment. The earthquake legacy effect is mainly assessed by monitoring either rapid landslide occurrences or slow‐moving landslides over time. However, landslide inventories provide discrete information both in spatial and temporal domains, whereas monitoring only selected slow‐moving landslides discards the response of hillslopes exposed to a given earthquake. Therefore, to provide a more comprehensive understanding of the concept, this research focuses on post‐seismic hillslope evolution by examining the deformation time series generated from the Interferometric Synthetic Aperture Radar technique over the area affected by the 2017 Mw 6.4 Nyingchi earthquake, China. We also analyse factors controlling these InSAR‐derived hillslope deformations. Our results show a high coherence between hydrologic conditions (i.e., precipitation and terrestrial water storage) and surface deformation in pre‐ and post‐seismic periods. The earthquake disturbs this strong correlation for a while (~2 years) right after the seismic tremor, and then, a seasonal deformation pattern depending on hydrologic conditions appears again. Our findings show that the average post‐seismic hillslope deformation is still higher than its pre‐seismic counterpart approximately four and a half years after the earthquake. These findings trigger further research questions regarding whether hillslopes could fully recover after a major earthquake or gain a new level of hillslope susceptibility caused by intense ground shaking. [ABSTRACT FROM AUTHOR]

The Tibetan Plateau stands as one of China's largest middle and low latitude permafrost regions. However, the effects of global warming and human activities have led to permafrost thawing, inducing surface instability and posing significant threats to infrastructure and indigenous communities. The deployment of Lu Tan-1 (LT-1), China's premier L-band synthetic aperture radar (SAR) satellite constellation, offers a novel opportunity to assess these changes. This paper evaluates the deformation of critical engineering corridors, such as the Qinghai-Tibet Railway (QTR) and the Qinghai-Tibet Highway (QTH), utilizing time-series InSAR techniques with LT-1 SAR constellation data. We introduce both Stacking InSAR and a multi-baseline persistent scatterer multitemporal (MT-InSAR) method to enhance permafrost and engineering corridor deformation detection capabilities. Results obtained through the MT-InSAR approach reveal line-of-sight (LOS) deformation velocities of permafrost in the Beiluhe region ranging from -90 mm/y to approximately 70 mm/y, with an average velocity amplitude of 0.06 m/y. Differential displacement between alpine meadows and alpine deserts across the Beiluhe region is successfully discerned using LT-1 SAR data. Deformation velocities of QTR, QTH were found to be lower than that of permafrost, with average velocities of 0.027 m/y. These findings underscore the LT-1 SAR constellation's potential to serve as a valuable SAR data source for monitoring engineering corridor deformation within the Tibetan Plateau permafrost region. [ABSTRACT FROM AUTHOR]

Spaceborne laser altimetry represents a novel active remote sensing technology applicable to earth observation, which together with imaging spectroscopy and synthetic aperture radar as a core technology for data acquisition in the earth observation systems. However, the accuracy of horizontal positioning for laser footprints from spaceborne laser altimeters declines due to various factors such as the changes in the orbital environment and the deterioration of performance. Moreover, the limited frequency of in-orbit calibration of the spaceborne laser altimeters and the non-disclosure of calibration parameters mean that users are heavily reliant on positioning accuracy of the altimetry data provided. To address this issue, a new algorithm is proposed in this study for enhancing the accuracy of horizontal positioning for laser footprints in the absence of satellite altimeter pointing and ranging parameters. In this algorithm, high-resolution DSM is taken as the reference terrain data to take advantage of the higher precision in elevation over horizontal positioning of the laser footprints. By adjusting the horizontal position of the laser footprint within a small area, the algorithm achieves the optimal alignment of laser elevation data with the reference terrain. Then, the resulting shift in the horizontal position of the laser footprints is referenced to correct their horizontal positioning during that period. Based on the high-accuracy DSM data collected from the Xinjiang autonomous region in China and the data collected by the GF-7 satellite, simulation experiments are performed in this study to analyze and validate the proposed algorithm. According to the experimental results, the horizontal accuracy of the laser footprints improves significantly from 12.56 m to 3.11 m after optimization by the proposed method. With the elimination of 9.45 m horizontal error, accuracy is improved by 75.23%. This method is demonstrated as effective in further optimizing the horizontal position of laser altimetry data products in the absence of altimeter parameters and original data, which promotes the application of spaceborne laser data. [ABSTRACT FROM AUTHOR]

Landslides are a common geological disaster, which cause many economic losses and casualties in the world each year. Drawing up a landslide list and monitoring their deformations is crucial to prevent landslide disasters. Interferometric synthetic aperture radar (InSAR) can obtain millimeter-level surface deformations and provide data support for landslide deformation monitoring. However, some landslides are difficult to detect due to the low-coherence caused by vegetation cover in mountainous areas and the difficulty of phase unwrapping caused by large landslide deformations. In this paper, a method based on multi-direction phase gradient stacking is proposed. It employs the differential interferograms of small baseline sets to directly obtain the abnormal region, thereby avoiding the problem where part of landslide cannot be detected due to a phase unwrapping error. In this study, the Sentinel-1 satellite ascending and descending data from 2018 to 2020 are used to detect landslides around Zhouqu County, China. A total of 26 active landslides were detected in ascending data and 32 active landslides in the descending data using the method in this paper, while the SBAS-InSAR detected 19 active landslides in the ascending data and 25 active landslides in the descending data. The method in this paper can successfully detect landslides in areas that are difficult for the SBAS-InSAR to detect. In addition, the proposed method does not require phase unwrapping, so a significant amount of data processing time can be saved. [ABSTRACT FROM AUTHOR]

A trend in the development of spaceborne Synthetic Aperture Radar (SAR) technology is the shift from a single-satellite repeated observation mode to a multi-satellite collaborative observation mode. However, current multi-satellite collaborative geolocation algorithms face challenges, such as geometric model mismatch and poor baseline estimation accuracy, arising from highly dynamic changes among multi-satellites. This paper introduces a high-precision and efficient geolocation algorithm for a spaceborne bistatic interferometric SAR (BiInSAR) system based on an improved range–Doppler (IRD) model. The proposed algorithm encompasses three key contributions. Firstly, a comprehensive description of the spatial baseline geometric model unique to the bistatic configuration is provided, with a specific focus on deriving the perpendicular baseline expression. Secondly, IRD geolocation functions are established to meet the specific requirements of the bistatic configuration. Then, a novel BiInSAR geolocation algorithm based on the IRD's functions is proposed, which can significantly improve the target geolocation accuracy by modifying the range–Doppler equation to suit the bistatic configuration. Meanwhile, a low-coupling parallel calculation method is proposed, which can improve the calculation speed by two to three times. Finally, the accuracy and efficiency of the algorithm are demonstrated using experimental data acquired by the TH-2 satellite, which is China's first spaceborne BiInSAR system. The experimental results prove that the IRD algorithm exhibits geolocation accuracy with an average error of less than 1 m and a standard deviation of less than 2.5 m while maintaining computational efficiency at a calculation speed of 1,429,678 pixels per second. [ABSTRACT FROM AUTHOR]

On March 27, 2022, a tailings dam in Jiaokou County, Shanxi Province, China, experienced a sudden breach leading to 224,000 m3 of released tailings that flowed downstream and damaged infrastructure. The tailings flow exhibited relatively slow movement according to eyewitnesses, with the complete duration of the failure process lasting 20–30 min. In order to reconstruct the slow motion of the tailings flows, we have adapted the mass flow simulation software r.avaflow to effectively simulate the slow-flow dynamic. In addition to the numerical simulation, we conducted a comprehensive investigation using satellite-based interferometric synthetic aperture radar (InSAR), optical satellite images, field surveys, unmanned aerial vehicle (UAV) photogrammetry, borehole drilling, and laboratory tests, with the aim of identifying underlying causes of this failure incident. The numerical simulation results showed a good representation of the observed impact area and reported time span, illustrating that the maximum simulated velocities during the entire flow slightly exceeded 6 m/s. InSAR analysis indicated a phase of rapid deformation that coincided with an unprecedented autumn storm in early October 2021, followed by a prolonged period of slow movements until the collapse, with an average line-of-sight (LOS) velocity of 24 mm/year. Through remote sensing surveys and field investigations, we observed the following deficiencies in design, construction, and operation of the Jiaokou TSF: (i) the TSF underwent an extra round of excessive loading from July 2021 onwards, despite being decommissioned in December 2019. and (ii) the TSF fell short of conventional design standards by the absence of drainage and seepage control measures and inappropriate dam construction methods (loess stacking). We conclude that the stability of the Jiaokou TSF was adversely affected by the extreme storm event in conjunction with deficiencies in TSF management, in particular the overloading that likely led to pore water pressure build-up and sudden strength loss. This failure incident is of significance as it draws attention to the need for more robust risk management of the thousands of existing TSFs in China. [ABSTRACT FROM AUTHOR]

After mastering the key technologies of manufacturing spaceborne Synthetic Aperture Radar (SAR), China's SAR satellites have been successfully launched into space. As the only civil microwave satellite listed in the "National High-resolution Earth Observation System Major Project," the Gaofen-3 (GF-3) 01 satellite is the first C-band multi-polarization SAR satellite with a resolution of 1 m. GF-3 series satellites stand out among civil SAR satellites worldwide because of their high resolution, wide swath, high geometric radiation quality, multiple imaging modes, and long operation time. Taking GF-3 series satellites as an example, this study introduces the development of China's civil SAR satellites, as well as their processing strategies and applications. The success of the GF-3 series satellites shows that China's SAR remote sensing technology has stepped into a new era of high-quality and high-precision Earth observations. [ABSTRACT FROM AUTHOR]

The Yarlung Tsangpo River Basin is characterized by its intricate topography and a significant presence of erosive materials. These often coincide with heavy localized precipitation, resulting in pronounced hydraulic erosion and geological hazards in mountainous regions. To tackle this challenge, we integrated the RUSLE-TLSD (Revised Universal Soil Loss Equation-Transportation-limited sediment delivery) model with InSAR (Interferometric Synthetic Aperture Radar) data, aiming to explore the sediment transport process and pinpoint hazard-prone sites within mountainous small watershed. The RUSLE-TLSD model aids in evaluating multi-year sediment transport dynamics in mountainous zones. And, the InSAR data precisely delineates changes in sediment scouring and siltation at sites vulnerable to hazards. Our research estimates that the potential average soil erosion within the watershed stands at 52.33 t/(hm2 a), with a net soil erosion of 0.69 t/(hm2 a), the sediment transport pathways manifest within the watershed's gullies and channels. Around 4.32% of the watershed area undergoes sedimentation, predominantly at the base of slopes and within channels. Notably, areas (d) and (e) emerge as the most susceptible to disasters within the watershed. Further analysis of the InSAR data highlighted four regions in the typical area (e) from 2017 that are either sedimentation- or erosion-prone, referred to as "hotspots." Among them, R1 exhibits a strong interplay between water and sediment, rendering it highly sensitive to environmental factors. In contrast, R4, characterized by a sharp bend in siltation, remains relatively impervious to external elements. The NDVI (normalized difference vegetation index) stands out as the pivotal determinant influencing sediment transport within the watershed, exerting a pronounced impact on the outlet section, especially in spring. By employing this approach, we gained a deeper understanding of sediment transport mechanisms and potential hazards in small watershed in uninformative mountainous areas. This study furnishes a robust scientific framework beneficial for erosion mitigation and disaster surveillance in mountainous watersheds. [ABSTRACT FROM AUTHOR]

The Kepingtage fold-and-thrust belt in the southwestern Tian Shan in western China hosted the 2020 Mw 6.0 Jiashi earthquake with no apparent surface ruptures. The thrust nappe structure in this region is characterized by moderate-magnitude (Mw5.5-6.5) seismicity, but the seismogenic mechanisms and controlling factors remain under investigation. In this study, we utilized Sentinel-1A synthetic aperture radar satellite data to reconstruct the InSAR coseismic deformation field of the 2020 Jiashi earthquake. To address the limitation imposed by residual orbital phases during the interferometric measurement, we proposed a novel automatic method that combines ascending and descending track data with terrain features for orbit refinement. Eight comparative tests were conducted to prove the effectiveness of the proposed method. Subsequently, we inverted the jointly constrained deformation field after orbit correction to obtain the fault geometric parameters and slip distribution. Our results show that the 2020 Jiashi earthquake is characterized by right-lateral transpressive motion. The smooth interference fringes demonstrate spatially continuous surface uplift and subsidence without detectable coseismic surface ruptures, with a maximum uplift of ~0.08 m and a maximum subsidence of ~0.03 m, caused by the subsurface folding due to deep seismic rupture. This event is best fitted by a north-dipping fault plane with a depth of 4.2 km, a dip angle of 11.6°, and a strike of 276° beneath the Keping thrust fault. In terms of various geometric parameters of the fault, the inversion results of this study are generally similar to the focal mechanism solution provided by USGS (MWb), but are different from the focal mechanism solutions of other institutions and previous research results. Combined with the published geological investigations and seismic reflection surveys, we suggest that the seismogenic structure of the 2020 Jiashi earthquake is the lower ramp of the Keping thrust fault and the abrupt fault bend between the lower and upper ramp may limit the propagation of the coseismic rupture to the surface. The limited rupture of this event is dominated by the irregularities in fault geometry along strike and dip, as well as the lower rock strength of the cover above the detachment, which contribute to a deeper understanding of the seismic behavior in fold-and-thrust belts and the moderate-magnitude seismicity in the southwestern Tian Shan region. [ABSTRACT FROM AUTHOR]

Long-distance water transfer is a critical engineering measure to rectify disparities in water resource distribution across regions. The effective operation and safety of such projects are paramount to their success, as localized issues can have cascading consequences, potentially disrupting the entire network. Conventional ground-based monitoring methods have limitations in measuring the deformation of large-scale structures. In this paper, InSAR is employed to monitor the deformation of the Shuangwangcheng (SWC) Reservoir, which features a long embankment dam as part of the South-to-North Water Diversion Project in China. We utilize data from both Sentinel-1 and TerraSAR-X satellites to derive 7-year deformation. Results reveal that the entire dam experiences continuous subsidence, with the maximum deformation in the line-of-sight direction measuring ~160 mm. While minor differential settlements are noted in different sections of the dam, the gradient is not significant due to the dam's substantial length. The InSAR deformation results from multiple geometries demonstrate good consistency, with the highest correlation observed between the Sentinel-1 ascending and descending datasets, exceeding 0.9. Validation against the GNSS observations of the three sites on the SWC Dam shows the accuracy of InSAR displacements is ~8 mm. Water level changes do impact deformation, but consolidation settlement appears to be the primary controlling factor during the monitoring period. This study underscores the potential of InSAR in long-distance water transfer projects and highlights that spatially continuous deformation is the most significant advantage. [ABSTRACT FROM AUTHOR]

The Lancang River flows through the alpine canyon region of southwest China, an area that has experienced frequent geological disasters over the years. Early monitoring of geological hazards is essential for disaster prevention and mitigation. However, traditional ground monitoring techniques are limited by the complex terrain conditions in high-altitude valley regions. In contrast, interferometric synthetic aperture radar (InSAR) technology can provide a high-precision, wide-range monitoring of slow rock-slope deformation, making it an effective tool for studying geological hazards. Within the study area, multiple synthetic aperture radar (SAR) images from the Sentinel-1A satellite were collected, and surface deformation was obtained using the small baseline subset InSAR (SBAS-InSAR). The results demonstrate that combining ascending and descending orbit images can be successfully applied to landslide monitoring in complex mountainous areas. Over 30 potential landslides were identified by combining InSAR results with optical images. The Line-Of-Sight (LOS) direction deformation features and their relationship with precipitation were analyzed based on two typical landslides, and two-dimensional/three-dimensional (2D/3D) deformation decomposition was carried out to reveal its motion characteristics. It was found that the cumulative deformation fluctuation amplitude was higher during the rainy season, and the main movement direction of the landslide was east–west. In addition, based on the spatial distribution and statistical analysis of deformation points along with meteorological data, geological elements, human activities, and topographic conditions, it is inferred that factors such as low vegetation coverage, tectonic movements, human activities, and high-altitude glacier thawing may contribute to the occurrence of disasters. And it was found that areas with high vegetation cover, high rainfall, and snow cover exhibit lower coherence coefficients. This study offers valuable insights for investigating large-scale geological in alpine canyon regions. [ABSTRACT FROM AUTHOR]

Until the Mw 6.6 Luding earthquake ruptured the Moxi section of the Xianshuihe fault (XSHF) on 5 September 2022, the region had not experienced an Mw >6 earthquake since instrumental records began. We used Global Positioning System (GPS) and Sentinel-1 interferometric synthetic aperture radar (InSAR) observations to image the coseismic deformation and constrain the location and geometry of the seismogenic fault using a Bayesian method We then present a distributed slip model of the 2022 Mw6.6 Luding earthquake, a left-lateral strike-slip earthquake that occurred on the Moxi section of the Xianshuihe fault in the southwest Sichuan basin, China. Two tracks (T26 and T135) of the InSAR data captured a part of the coseismic surface deformation with the line-of-sight displacements range from ∼−0.16 m to ~0.14 m in the ascending track and from ~−0.12 m to ~0.10 m in the descending track. The inverted best-fitting fault model shows a pure sinistral strike-slip motion on a west-dipping fault plane with a strike of 164.3°. We adopt a variational Bayesian approach and account for the uncertainties in the fault geometry to retrieve the distributed slip model. The inverted result shows that the maximum slip of ~1.82 m occurred at a depth of 5.3 km, with the major slip concentrated within depths ranging from 0.9–11 km. The InSAR-determined moment is 1.3 × 1019 Nm, with a shear modulus of 30 GPa, equivalent to Mw 6.7. The published coseismic slip models of the 2022 Luding earthquake show apparent differences despite the use of similar geodetic or seismic observations. These variations underscore the uncertainty associated with routinely performed source inversions and their interpretations for the underlying fault model. [ABSTRACT FROM AUTHOR]

The Upper Jinsha River (UJSR) has great water resource potential, but large-scale active landslides hinder water resource development and utilization. It is necessary to understand the spatial distribution and deformation trend of active landslides in the UJSR. In areas of high elevations, steep terrain or otherwise inaccessible to humans, extensive landslide studies remain challenging using traditional geological surveys and monitoring equipment. Stacking interferometry synthetic aperture radar (stacking-InSAR) technology, optical satellite images and unmanned aerial vehicle (UAV) photography are applied to landslide identification. Small baseline subset interferometry synthetic aperture radar (SBAS-InSAR) was used to obtain time-series deformation curves of samples to reveal the deformation types of active landslides. A total of 246 active landslides were identified within the study area, of which 207 were concentrated in three zones (zones I, II and III). Among the 31 landslides chosen as research samples, six were linear-type landslides, three were upward concave-type landslides, 10 were downward concave-type landslides, and 12 were step-type landslides based on the curve morphology. The results can aid in monitoring and early-warning systems for active landslides within the UJSR and provide insights for future studies on active landslides within the basin. [ABSTRACT FROM AUTHOR]

Landslides are common natural disasters that cause serious damage to ecosystems and human societies. To effectively prevent and mitigate these disasters, an accurate assessment of landslide hazards is necessary. However, most traditional landslide hazard assessment methods rely on static assessment factors while ignoring the dynamic changes in landslides, which may lead to false-positive errors in the assessment results. This paper presents a novel landslide hazard assessment method for the Zagunao River basin, China. In this study, an updated landslide inventory was obtained for the Zagunao River basin using data from interferometric synthetic aperture radar (InSAR) and optical images. Based on this inventory, a landslide susceptibility map was developed using a random forest algorithm. Finally, an evaluation matrix was created by combining the results of deformation rates from both ascending and descending data to establish a hazard level that considers surface deformation. The method presented in this study can reflect recent landslide hazards in the region and produce dynamic assessments of regional landslide hazards. It provides a basis for the government to identify and manage high-risk areas. [ABSTRACT FROM AUTHOR]

The reactivation of ancient landslides, a persistent issue that hinders urban development and threatens human safety, is the central focus of this paper. Specifically, this paper offers a detailed description and analysis of an ancient landslide that reactivated on February 26, 2021, in Guoye town, Zhouqu County, Gansu Province, China, and has remained slow-moving since then. With a volume of approximately 21.2 million m3 of rock and soil masses involved, this landslide poses a significant risk to the safety of 1119 individuals from 282 households in Moli village and Guoye village. A combination of field investigations, remote sensing interpretation, in situ monitoring, and interferometric synthetic aperture radar (InSAR) was used to investigate the landslide characteristics and reactivation mechanisms. The results revealed that the presence of sliding-prone rock formations and tectonic movement were the primary contributors to the formation of the Moli landslide. Furthermore, the accumulation of bedrock blocks in the quarry and collapsed rock masses caused by fault activity at the rear parts, along with the additional load from buildings on the middle and rear sections, increased the sliding force. Simultaneously, the erosion of the Dashuiba River resulted in a reduction in the anti-slip force, thereby directly facilitating landslide reactivation. The notable increase in annual rainfall in recent years has played a crucial role in ancient landslide reactivation by elevating the groundwater level and softening the shear strength of the sliding zone soil. The findings of this study contribute to an enhanced understanding of the reactivation mechanisms in giant, ancient landslides situated within areas characterized by highly complex geological conditions. [ABSTRACT FROM AUTHOR]

The magnitude (spatial location, area, and volume) of landslides is a crucial parameter for estimating the quantitative risk and preventing landslide hazards. This study proposes a novel approach to forecast the volume of potential landslides in alpine-canyon terrain by combining the empirical relationship linking landslide volume (V) to characteristics and synthetic aperture radar interferometry (InSAR) technology in the northeast of the Qinghai-Tibet Plateau, China. First, a historical landslide inventory with detailed characteristics was established by reviewing literature and field investigation. Then, the relationship between volume and characteristics of landslides was analyzed based on the least-squares linear regression of the logarithmic transformation. Finally, the relationships of the colluvial landslides (V = 0.170 × L 0.982 × W 1.589 × H 0.471) and loess landslides (V = 0.170 × L 0.796 × W 2.151 × H 0.048) were obtained after verifying several landslides. The ground deformation rate was generated, and 217 potential landslides were detected using 47 descending Sentinel-1A images acquired from January 11, 2020, to July 16, 2021, and 40 ascending Sentinel-1A images acquired from January 11, 2020, to April 23, 2021. Through the established relationships, the total volumes of all potential colluvial and loess landslides were estimated to be 8.77 × 108 m3 and 5.74 × 108 m3, respectively. This study provides an improved empirical relationship to better forecast the volume of potential landslides in alpine-canyon terrain. Furthermore, the study helps in understanding the future dynamic evolution of potential landslides using InSAR technology, which provides scientific understanding to assess and prevents potential landslide hazards and risks in the Bailong River basin. [ABSTRACT FROM AUTHOR]