Search

Melamine-impregnated paper decorated medium-density fiberboard (MIPMDF) is the main board used for wooden furniture materials in China, and the formaldehyde released from the board and furniture products is harmful to human beings and is a wide concern. This paper aimed to pay attention to the formaldehyde emission of MIP-MDF and its furniture products. This study utilized a 1 m³climatic chamber to measure the formaldehyde emission of MIP-MDF and nightstand made of MIP-MDF in relation to the time and load factors. According to the results, in the 2 to 24 h stage, the emission of formaldehyde in the nightstand made of MIPMDF materials changed significantly, and the overall trend showed a changing trend of first increasing and then declining. The formaldehyde emission of MIP-MDF stabilized after 40 h, while the formaldehyde emission of the nightstand stabilized after 60 h. As time passed, the formaldehyde emission changes of MIP-MDF and nightstand were almost the same. The formaldehyde emission of MIP-MDF and nightstand has a specific positive correlation with the carrying load. With increased carrying loads, the formaldehyde emission tends to increase, but the degree of influence gradually decreases with the addition of the carrying loads. [ABSTRACT FROM AUTHOR]

Owing to the similarities in raw materials, technology, and application fields between fiberboard and particleboard, it is crucial to perform a comparative life cycle assessment (LCA) on these two types of panels. This comparison can greatly contribute to a comprehensive understanding of the environmental impact of these panels. However, there is a limited number of studies available regarding the comparative LCA study of these panels. Therefore, in this study, the environmental effects of manufacturing process of dry-process fiberboard (medium-density fiberboard, MDF) and particleboard (PB) were compared. A cradle-to-gate LCA model was developed using eFootprint software. The results showed that PB exhibited better environmental performance than MDF because of the lower power consumption and the amount of urea-formaldehyde (UF) resin required in the manufacturing process. The total environmental impact of PB from cradle to gate was 27.5% lower than that of MDF, and the eco-efficiency of PB was 18.8% higher than that of MDF. Regardless of the panel type, the greatest environmental effect occurred in the raw and auxiliary materials production phase, followed by the board production phase. The environmental effect of the transportation phase was minimal. The production of UF resin and the consumption of electricity were identified as the main environmental hotspots. Finally, two approaches to enhance environmental performance were proposed and applied: first, replacing UF resin with a soy-based adhesive, and second, switching from thermal power to hydropower. In addition, the environmental impacts before and after implementing these approaches were compared. [Display omitted] • Particleboard has better environmental performance than medium density fiberboard. • Urea-formaldehyde resin and electricity are the key environmental hotspots. • Soy-based adhesive doesn't outperform urea-formaldehyde resin in all impacts. [ABSTRACT FROM AUTHOR]