Search

We deployed a dense geodetic and seismological network in the Atacama seismic gap in Chile. We derive a microseismicity catalog of >30,000 events, time series from 70 GNSS stations, and utilize a transdimensional Bayesian inversion to estimate interplate locking. We identify two highly locked regions of different sizes whose geometries appear to control seismicity patterns. Interface seismicity concentrates beneath the coastline, just downdip of the highest locking. A region with lower locking (27.5°S–27.7°S) coincides with higher seismicity levels, a high number of repeating earthquakes and events extending toward the trench. This area is situated where the Copiapó Ridge is subducted and has shown previous indications of both seismic and aseismic slip, including an earthquake sequence in 2020. While these findings suggest that the structure of the downgoing oceanic plate prescribes patterns of interplate locking and seismicity, we note that the Taltal Ridge further north lacks a similar signature. Plain Language Summary: Deformation along plate boundaries can occur seismically (i.e. through earthquakes) as well as aseismically (i.e. slipping slowly), and it is important to understand where each of these modes is dominant. Along the Chilean subduction contact, North‐Central Chile is the only place where aseismic deformation episodes have been observed so far. In order to study these processes in detail, we deployed and operated dense geodetic and seismological networks in this region. Analyzing the data collected by these networks, we find notable relationships between seismic and aseismic processes. Thousands of small earthquakes are found at the boundaries of locked regions, whereas no small earthquakes are found at their interior. Thus, implying such regions are mechanically coupled, that is, currently accumulating elastic deformation energy that will 1 day be released during a large earthquake. Along the North‐Central Chilean plate boundary, there is one region (around 27.5°S) that shows many signs of aseismic deformation. It is located where a chain of seamounts is being subducted, which is likely responsible for the different behavior of this segment. Key Points: Microseismicity catalog and map of interplate locking derived for the Atacama 1922 seismic gap in North‐Central ChileSeismicity in vicinity of plate interface coincides with downdip edge of high couplingSeismo‐geodetic signals due to the subduction of the Copiapó ridge are prominent but negligible for the subducting Taltal Ridge [ABSTRACT FROM AUTHOR]

The aftershock distribution of the 2014 Mw 8.1 Iquique earthquake offshore northern Chile, identified from a long‐term deployment of ocean bottom seismometers installed eight months after the mainshock, in conjunction with seismic reflection imaging, provides insights into the processes regulating the updip limit of coseismic rupture propagation. Aftershocks updip of the mainshock hypocenter frequently occur in the upper plate and are associated with normal faults identified from seismic reflection data. We propose that aftershock seismicity near the plate boundary documents subduction erosion that removes mass from the base of the wedge and results in normal faulting in the upper plate. The combination of very little or no sediment accretion and subduction erosion over millions of years has resulted in a very weak and aseismic frontal wedge. Our observations thus link the shallow subduction zone seismicity to subduction erosion processes that control the evolution of the overriding plate. Plain Language Summary: To better understand the controls on shallow seismicity and subduction erosion following large subduction earthquakes, we use marine recordings of the Mw 8.1 2014 Iquique earthquake aftershocks and long‐offset multi‐channel seismic data. By comparing the aftershock locations and seismic imaging, we observe that most aftershocks occurred in the upper continental plate and abruptly stopped in the frontal forearc. The amplitude characteristics of upper‐crust reflections indicate a fractured and fluid‐filled outer forearc, which is associated with the absence of aftershocks. Large‐scale faulting, as evidenced by disrupted reflections in the seismic image, can be correlated to upper plate seismicity. We propose that the aftershocks updip of the main earthquake area reflect active subduction erosion processes. Key Points: We investigate structure and seismicity at the updip end of the 2014 Iquique earthquake rupture using amphibious seismic dataSeismicity updip of the 2014 Iquique earthquake occurs over a broad range likely interpreted to be related to the basal erosion processesCoseismic stress changes and aftershocks activate extensional faulting of the upper plate and subduction erosion [ABSTRACT FROM AUTHOR]

On 2016 December 25, an Mw 7.6 earthquake broke a portion of the Southern Chilean subduction zone south of Chiloé Island, located in the central part of the Mw 9.5 1960 Valdivia earthquake. This region is characterized by repeated earthquakes in 1960 and historical times with very sparse interseismic activity due to the subduction of a young (~15 Ma), and therefore hot, oceanic plate.We estimate the coseismic slip distribution based on a kinematic finite-fault source model, and through joint inversion of teleseismic body waves and strong motion data. The coseismic slip model yields a total seismic moment of 3.94 x 1020 N·m that occurred over ~30 s, with the rupture propagating mainly downdip, reaching a peak slip of ~4.2 m. Regional moment tensor inversion of stronger aftershocks reveals thrust type faulting at depths of the plate interface. The fore- and aftershock seismicity is mostly related to the subduction interface with sparse seismicity in the overriding crust. The 2016 Chilo´e event broke a region with increased locking and most likely broke an asperity of the 1960 earthquake. The updip limit of the main event, aftershocks, foreshocks and interseismic activity are spatially similar, located ~15 km offshore and parallel to Chiloé Islands west coast. The coseismic slip model of the 2016 Chiloé earthquake suggests a peak slip of 4.2 m that locally exceeds the 3.38 m slip deficit that has accumulated since 1960. Therefore, the 2016 Chiloé earthquake possibly released strain that has built up prior to the 1960 Valdivia earthquake. [ABSTRACT FROM AUTHOR]

The very shallow part of subduction megathrusts occasionally hosts tsunami earthquakes, with unusually slow rupture propagation. The aftershock sequence of the 2010 Mw 8.8 Maule earthquake, offshore Chile, provides us with the opportunity to study systematic changes in source properties for smaller earthquakes within a single segment of a subduction zone. We invert amplitude spectra for double-couple moment tensors and centroid depths of 71 aftershocks of the Maule earthquake down to magnitudes Mw 4.0. In addition, we also derive average source durations. We find that shallower earthquakes tend to have longer normalized source durations on average, similar to the pattern observed previously for larger magnitude events. This depth dependence is observable for thrust and normal earthquakes. The normalized source durations of normal- faulting earthquakes are at the lower end of those for thrust earthquakes, probably because of the higher stress drops of intraplate earthquakes compared to interplate earthquakes. We suggest from the similarity of the depth dependence of normal and thrust events and between smaller and larger magnitude earthquakes that the depth-dependent variation of rigidity, rather than frictional conditional stability at the plate interface, is primarily responsible for the observed pattern. Tsunami earthquakes probably require both low rigidity and conditionally stable frictional conditions; the presence of longduration moderate-magnitude events is therefore a helpful but not sufficient indicator for areas at risk of tsunami earthquakes. [ABSTRACT FROM AUTHOR]

On April 2014 the Iquique Mw 8.1 earthquake ruptured the interpolate contact between the oceanic Nazca and continental South American plates offshore northern Chile between 19.5°S to 21°S in April 2014. This earthquake did not fully release the strain accumulated since the last great megathrust (Mw 8.8) in 1877 and had left an unbroken segment in the south. From December 2014 to November 2016, we deployed an offshore network of 15 Ocean Bottom Seismometers (OBS) that covered the rupture area and the unbroken southern segment using the Chilean Navy ship OPV Toro and R/V Sonne. That data set is supplemented by five weeks of data from 67 OBS installed for a controlled source seismic experiment during cruise MGL1610 of the R/V Marcus Langseth in late 2016. Data acquired onshore by stations from of the IPOC (Integrated Plate Boundary Observatory Chile) and CSN (Chilean Seismological Service) networks are also included.We present first results of this ongoing project, which include double-difference hypocenter relocations based on waveform cross-correlation. Most of the seismicity occurs between 19.5 and 21°S up-dip of the patch of maximum coseismic slip during the 2014 earthquake, while the seismicity in seismogenic depths is highly concentrated forming well-defined clusters. The observed seismicity provides constraints on the structure of the marine forearc and enables us to relate the seismicity distribution to the background seismicity, seafloor morphology, and regional tectonics. [ABSTRACT FROM AUTHOR]

The subduction of seamounts and basement ridges affects the structure, morphology, and physical state of a convergent margin. To evaluate their impact on the seismo-tectonic setting of the subduction zone and the tectonic development of the lower subducting and upper overriding plate, it is essential to know the precise location of subducted topographic features under the marine forearc. Offshore Northern Chile, the Iquique Ridge represents a broad zone of complex and heterogeneous structure of variable width on the oceanic Nazca Plate, which complicates attempts to project it beneath the forearc of the Chilean subduction zone. Here we use a state-of-the-art seismic reflection data processing approach to map structures related to ridge subduction under the marine forearc with unprecedented accuracy and resolution and evaluate their impact on the deformation of both the plate boundary and the upper plate. We show that significant ridge-related topography is currently subducting south of 20.5 °S and that the combined effect of horst and graben subduction with subduction of Iquique ridge-related thickened and elevated crust causes an upward bulging of the entire upper plate from the plate interface up to the seafloor as well as the presence of kilometer-scale anticlinal structures observed in multibeam bathymetric data that are approximately aligned with horsts seaward of the trench. In the area affected by the subducting ridge, a frontal prism is absent, which may relate to frontal subduction erosion caused by the excess lower plate topography. In contrast farther towards the north, where only isolated seamounts subduct, a small frontal prism and a slope/apron sediment cover down to 3000 m water depth are found. [ABSTRACT FROM AUTHOR]