Search

This work presents data regarding the occurrence and treatment of Contaminants of Emerging Concern (CECs) in Brazil in the past decade. The literature review (2011-2021) revealed the detection of 87 pharmaceutical drugs and personal care products, 58 pesticides, 8 hormones, 2 illicit drugs, caffeine and bisphenol A in distinct matrices (i.e.: wastewater, groundwater, sea water, rainwater, surface water, drinking water and hospital effluent). Concentrations of CECs varied from ng-μg L -1 depending on the location, compound and matrix. The inefficiency of conventional wastewater treatment methods on the removal of CECs and lack of basic sanitation in some regions in the country aggravates contamination of Brazilian aquatic environments and poses potential environmental and health risks. Advanced oxidation processes (AOPs) are pointed out as viable and efficient alternatives to degrade CECs and prevent environmental contamination. A total of 375 studies involving the use of AOPs in Brazilian aqueous matrices were published in the last decade. Fenton and photo-Fenton processes, photo-peroxidation, ozonation, electrochemical advanced oxidation and heterogeneous photocatalysis are some of the AOPs applied by Brazilian research groups. Although many works discuss the importance of applying these technologies for CECs removal in real treatment plants, most of these studies assess the treatment of distilled water or simulated effluent. Therefore, the conduction of studies applying AOPs in real matrices are critical to drive the implementation of these processes coupled to conventional water and wastewater treatment in real plants in order to prevent the contamination of environmental matrices by CECs in Brazil., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Municipal Solid Waste (MSW) from the city of Boa Esperança, Minas Gerais, Brazil, was used to produce refuse-derived fuel (RDF). The MSW contains residues from human society, including product packaging, bottles, batteries, organic waste, fines, textiles, health textiles, plastics, glass, and metals, among others. The following protocol was performed during the conversion of MSW to RDF: (i) the raw MSW was placed in a silo and sent to a primary crusher using a metal conveyor belt, which reduced the particle size to 80 mm; (ii) the biomass was transferred to a selective waste collection platform by a rubber conveyor belt, and the recyclable waste, metals, and glasses were separated manually; (iii) residual metals were removed by a magnetic separator; (iv) the waste was transferred to a secondary crusher which reduced the particle size to 60 mm; (v) the waste passed through an airborne separator to remove materials with high density, such as glass, stones, and organic materials, using a metallic conveyor belt; (vi) the particle size was reduced to 40 mm by a tertiary crusher; (vii) the aluminium was separated from the non-metallic materials (plastic, paper, rubber, etc.) using an eddy current separator; (viii) the particle size was reduced to 25 mm using a quaternary crusher; (ix) the MSW was introduced into a rotary dryer using a metal conveyor belt, where the moisture content was reduced to close to 15 wt%, which required thermal energy equivalent to 186 kWh; (x) the RDF was used in a thermochemical reactor and 4148 kWh of thermal energy was produced. In addition, the MSW and RDF were analysed, and the elemental composition and combustion characteristics were determined. Based on these results, the protocol evaluated was found to be effective in the conversion of MSW to RDF, which can be used as a source of renewable fuel., (Copyright © 2019 Elsevier Ltd. All rights reserved.)