Search

The concentrations of Carbonyl in 40 urban residences in Beijing were measured in this study. The carbonyls in indoor air were collected by a DNPH-pre-treated cartridge, extracted by acetonitrile and analyzed by HPLC. A questionnaire was administrated to the residents in order to collect the information of building characteristics and human health conditions. The total concentrations of carbonyls were 136.0±77.5 μg/m 3 . Formaldehyde was the most abundant species with concentrations of 64.4±39.7 μg/m 3 , following by acetaldehyde, acetone, and hexaldehyde. The indoor source strengths of carbonyl species were estimated with One-compartment mass balance model. The indoor source strengths of formaldehyde acetaldehyde, acetone and hexaldehyde were estimated to be 11.6 mg/h, 4.41 mg/h, 1.17 mg/h, and 4.85 mg/h, respectively. Analysis of variance (ANOVA) was employed to examine the impacts of possible factors on the carbonyl concentrations. We found that sofa material, smoking and residence location had significant impacts on formaldehyde concentration, smoking and kitchen structure on acetaldehyde, quantity of plants and kitchen structure on acetone, quantity of plants and pesticide on hexaldehyde, respectively. [ABSTRACT FROM AUTHOR]

Objective: Ambient fine particulate matter (PM2.5) pollution is currently a major public health concern in Chinese urban areas. However, PM2.5 exposure primarily occurs indoors. Given such, we conducted this study to characterize the indoor-outdoor relationship of PM2.5 mass concentrations for urban residences in Beijing. Methods: In this study, 24-h real-time indoor and ambient PM2.5 mass concentrations were concurrently collected for 41 urban residences in the non-heating season. The diurnal variation of pollutant concentrations was characterized. Pearson correlation analysis was used to examine the correlation between indoor and ambient PM2.5 mass concentrations. Regression analysis with ordinary least square was employed to characterize the influences of a variety of factors on PM2.5 mass concentration. Results: Hourly ambient PM2.5 mass concentrations were 3–280 μg/m3 with a median of 58 μg/m3, and hourly indoor counterpart were 4–193 μg/m3 with a median of 34 μg/m3. The median indoor/ambient ratio of PM2.5 mass concentration was 0.62. The diurnal variation of residential indoor and ambient PM2.5 mass concentrations tracked with each other well. Strong correlation was found between indoor and ambient PM2.5 mass concentrations on the community basis (coefficients: r≥0.90, p<0.0001), and the ambient data explained ≥84% variance of the indoor data. Regression analysis suggested that the variables, such as traffic conditions, indoor smoking activities, indoor cleaning activities, indoor plants and number of occupants, had significant influences on the indoor PM2.5 mass concentrations. Conclusions: PM2.5 of ambient origin made dominant contribution to residential indoor PM2.5 exposure in the non-heating season under the high ambient fine particle pollution condition. Nonetheless, the large inter-residence variability of infiltration factor of ambient PM2.5 raised the concern of exposure misclassification when using ambient PM2.5 mass concentrations as exposure surrogates. PM2.5 of indoor origin still had minor influence on indoor PM2.5 mass concentrations, particularly at 11:00–13:00 and 22:00–0:00. The predictive models suggested that particles from traffic emission, secondary aerosols, particles from indoor smoking, resuspended particles due to indoor cleaning and particles related to indoor plants contributed to indoor PM2.5 mass concentrations in this study. Real-time ventilation measurements and improvement of questionnaire design to involve more variables subject to built environment were recommended to enhance the performance of the predictive models. [ABSTRACT FROM AUTHOR]

Objective: To assess health risks associated with inhalation exposure to formaldehyde and benzene mainly emitted from building and decoration materials in newly remodeled indoor spaces in Beijing. Methods: We tested the formaldehyde and benzene concentrations in indoor air of 410 dwellings and 451 offices remodeled within the past year, in which the occupants had health concerns about indoor air quality. To assess non-carcinogenic health risks, we compared the data to the health guidelines in China and USA, respectively. To assess carcinogenic health risks, we first modeled indoor personal exposure to formaldehyde and benzene using the concentration data, and then estimated the associated cancer risks by multiplying the indoor personal exposure by the Inhalation Unit Risk values (IURs) provided by the U.S. EPA Integrated Risk Information System (U.S. EPA IRIS) and the California Office of Environmental Health Hazard Assessment (OEHHA), respectively. Results: (1) The indoor formaldehyde concentrations of 85% dwellings and 67% offices were above the acute Reference Exposure Level (REL) recommended by the OEHHA and the concentrations of all tested buildings were above the chronic REL recommended by the OEHHA; (2) The indoor benzene concentrations of 12% dwellings and 32% offices exceeded the reference concentration (RfC) recommended by the U.S. EPA IRIS; (3) The median cancer risks from indoor exposure to formaldehyde and benzene were 1,150 and 106 per million (based on U.S. EPA IRIS IURs), 531 and 394 per million (based on OEHHA IURs). Conclusions: In the tested buildings, formaldehyde exposure may pose acute and chronic non-carcinogenic health risks to the occupants, whereas benzene exposure may pose chronic non-carcinogenic risks to the occupants. Exposure to both compounds is associated with significant carcinogenic risks. Improvement in ventilation, establishment of volatile organic compounds (VOCs) emission labeling systems for decorating and refurbishing materials are recommended to reduce indoor VOCs exposure. [ABSTRACT FROM AUTHOR]

Exposure to phthalates poses adverse health impacts to human beings. In this study, we analyzed 7 phthalates in dust samples, which were collected with vacuum cleaner from 40 to 31 residences in Beijing in summer and winter, respectively. The major phthalates (median concentration in the summer and winter, respectively) were D i BP (55 and 40 ng/mg), D n BP (99 and 30 ng/mg) and DEHP (795 and 335 ng/mg). The concentrations were significantly influenced by season and residence time of house dust. The concentrations of phthalates in dust on plastic surfaces were highest, followed by those on wooden and fabric surfaces. The dust-air partition coefficients (K d) were calculated: the median values were 0.13, 0.02 and 5.62 m3/mg in the summer and 0.06, 0.018 and 0.76 m3/mg in the winter for D i BP, D n BP and DEHP, respectively. A comparison with K d * at equilibrium state suggested that partition between air and dust deviated from equilibrium state in both seasons. The results also revealed that dust-phthalates in the summer may completely originate from source materials via direct transfer and external physical process; while dust-phthalates in the winter may come from both air (via partition) and source material (via direct transfer and external physical process). The influence of temperature on dust-phthalate concentrations differed by season, owing to different origin of dust-phthalates in two seasons. Polar organic components in dust, which are products of reactions between O 3 and unsaturated hydrocarbons in dust, likely played an important role in fate and transport of phthalates. The presence of them resulted in the significant associations between dust-phthalate concentrations and air humidity in the summer. Moreover, the impacts of indoor PM 2.5 concentrations, traffic conditions surrounding residence, household lifestyle and number of occupants were also observed. The mechanisms behind those observations were discussed. [Display omitted] • Dust-air partition of phthalates deviated from equilibrium state. • Product-to-dust phthalates migration included direct transfer and external process. • Origin of dust-phthalates may differ by season. • Built environmental determinants on dust-phthalate concentrations were characterized. [ABSTRACT FROM AUTHOR]