Search

Plastic pollution is ubiquitous within the marine environment, including surface waters, water column and benthic sediments. Marine plastic contamination is expected to increase if future projections of increased plastic production eventuate. Conversely, national and international efforts are aiming to reduce marine plastic contamination. In this context, scientists, managers and the general public are increasingly interested in understanding the status and temporal trends of plastic contamination in the marine environment. Presented here is the first temporal assessment of plastic contamination in surface waters of the Great Barrier Reef (GBR), Australia. Specifically, duplicate surface seawater samples (n = 66) were collected at the SS Yongala shipwreck (Central GBR) monthly from September 2016 to September 2019 and analysed for plastic presence and abundance. The processing workflow involved density separation, followed by filtration, visual identification and sizing of putative plastics using stereomicroscopy, and chemical characterisation using Fourier transform infrared spectroscopy. A total of 533 plastic items were identified across all tows, consisting of macro-, meso- and microplastic fragments and fibres, with polypropylene and polyethylene being the most common polymers. Plastic contamination was detected in every replicate tow, bar one. Plastic concentrations fluctuated and spiked every three months, although contamination did not significantly alter across the three-year period. Wind speed, salinity and river discharge volume, but not surface current speed nor sea surface temperature, had a significant influence on the levels of plastic contamination. This study reveals, for the first time, the chronic presence of plastic debris in the surface waters of the GBR highlighting the need for long-term and on-going monitoring of the marine environment for plastic contamination., (Crown Copyright © 2022. Published by Elsevier Ltd. All rights reserved.)

Monitoring programs are fundamental to understanding the state and trend of aquatic ecosystems. Sampling designs are a crucial component of monitoring programs and ensure that measurements evaluate progress toward clearly stated management objectives, which provides a mechanism for adaptive management. Here, we use a well-established marine monitoring program for inshore water quality in the Great Barrier Reef (GBR), Australia to investigate whether a sampling re-design has increased the program's capacity to meet its primary objectives. Specifically, we use bootstrap resampling to assess the change in statistical power to detect temporal water quality trends in a 15-year inshore marine water quality data set that includes data from both before and after the sampling re-design. We perform a comprehensive power analysis for six water quality analytes at four separate study areas in the GBR Marine Park and find that the sampling re-design (i) increased power to detect trends in 23 of the 24 analyte-study area combinations, and (ii) resulted in an average increase in power of 34% to detect increasing or decreasing trends in water quality analytes. This increase in power is attributed more to the addition of sampling locations than increasing the sampling rate. Therefore, the sampling re-design has substantially increased the capacity of the program to detect temporal trends in inshore marine water quality. Further improvements in sampling design need to focus on the program's capability to reliably detect trends within realistic timeframes where inshore improvements to water quality can be expected to occur., Competing Interests: The authors have declared that no competing interests exist.

Seafood contamination with, and human consumption of, microplastics (MPs) have recently been highlighted as an emerging concern for global food security. While there is evidence that commercial marine species are contaminated with MPs, it is still unknown if seafood can act as a vector for MP transfer to human consumers. Microplastics have been reported in the digestive tract, gills and in select internal organs of marine animals. However, many of these tissues are not typically eaten by human consumers but discarded. In this critical review, we examined the peer-reviewed literature for evidence of MP contamination in seafood, and the potential transfer to human consumers. Based on known seafood consumption patterns in a typical Australian diet, we assessed the relevance and reliability of the current body of literature to examine the prospect and risk of MP transfer. The relevance of data was considered based on the organism studied, origin of the samples, and the tissues analysed, while reliability was assessed based on procedural methodologies used to derive the data. A review of 132 studies found limited evidence of MP contamination in edible tissues from fresh fish or crustaceans. MP presence was confirmed in packaged fish, as well as in fresh and packaged bivalve molluscs. The limited number of studies satisfying the relevance and reliability criteria (n = 24) precluded a quantitative assessment of the potential risk associated with MP transfer. While consumption of packaged fish and bivalve molluscs may result in the consumption of MPs by humans, it is currently unknown whether this presents a health risk., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Population outbreaks of Crown-of-Thorns Starfish (COTS; Acanthaster spp.) are a major contributor to loss of hard coral throughout the Indo-Pacific. On Australia's Great Barrier Reef (GBR), management interventions have evolved over four COTS outbreaks to include: (1) manual COTS control, (2) Marine Protected Area (MPA) zoning, and, (3) water quality improvement. Here we evaluate the contribution of these three approaches to managing population outbreaks of COTS to minimize coral loss. Strategic manual control at sites reduced COTS numbers, including larger, more fecund and damaging individuals. Sustained reduction in COTS densities and improvements in hard coral cover at a site were achieved through repeated control visits. MPAs influenced initial COTS densities but only marginally influenced final hard coral cover following COTS control. Water quality improvement programs have achieved only marginal reductions in river nutrient loads delivered to the GBR and the study region. This, a subsequent COTS outbreak, and declining coral cover across the region suggest their contributions are negligible. These findings support manual control as the most direct, and only effective, means of reducing COTS densities and improving hard coral cover currently available at a site. We provide recommendations for improving control program effectiveness with application to supporting reef resilience across the Indo-Pacific.

Marine debris, and in particular plastic pollution, is ubiquitous throughout global marine environments. Here, we present a classification of marine microdebris (i.e. debris between 0.1 μm and <5 mm) tailored to represent synthetic, semi-synthetic and naturally-derived items. The specific aim of this classification is to introduce a level of consistency in the higher-level characterisation of marine microdebris, thereby improving the overall reporting on marine microdebris contamination. We first conducted an extensive literature review on the accumulation of ingested debris in fish to identify discrepancies in marine microdebris reporting as a basis for the new classification. The review reveals the diverse nature of ingested marine microdebris, including items that are non-plastic but often incorrectly reported on as microplastics. We then applied our classification to a case study on wild-caught juvenile coral trout, Plectropomus spp., from the Great Barrier Reef World Heritage Area, Australia. This first report on accumulation of ingested marine debris in commercial fish on the reef demonstrates a high frequency of occurrence and a prevalence of semi-synthetic and naturally-derived fibres. Based on our findings, we offer recommendations on potential improvements for the classification presented, ultimately contributing to a more realistic assessment of the ecological risks of marine microdebris.

The Great Barrier Reef (GBR) is a World Heritage Area and contains extensive areas of coral reef, seagrass meadows and fisheries resources. From adjacent catchments, numerous rivers discharge pollutants from agricultural, urban, mining and industrial activity. Pollutant sources have been identified and include suspended sediment from erosion in cattle grazing areas; nitrate from fertiliser application on crop lands; and herbicides from various land uses. The fate and effects of these pollutants in the receiving marine environment are relatively well understood. The Australian and Queensland Governments responded to the concerns of pollution of the GBR from catchment runoff with a plan to address this issue in 2003 (Reef Plan; updated 2009), incentive-based voluntary management initiatives in 2007 (Reef Rescue) and a State regulatory approach in 2009, the Reef Protection Package. This paper reviews new research relevant to the catchment to GBR continuum and evaluates the appropriateness of current management responses., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

Degradation of coastal ecosystems in the Great Barrier Reef (GBR) lagoon, Australia, has been linked with increased land-based runoff of suspended solids, nutrients and pesticides since European settlement. This study estimated the increase in river loads for all 35 GBR basins, using the best available estimates of pre-European and current loads derived from catchment modelling and monitoring. The mean-annual load to the GBR lagoon for (i) total suspended solids has increased by 5.5 times to 17,000ktonnes/year, (ii) total nitrogen by 5.7 times to 80,000tonnes/year, (iii) total phosphorus by 8.9 times to 16,000tonnes/year, and (iv) PSII herbicides is 30,000kg/year. The increases in river loads differ across the 10 pollutants and 35 basins examined, reflecting differences in surface runoff, urbanisation, deforestation, agricultural practices, mining and retention by reservoirs. These estimates will facilitate target setting for water quality and desired ecosystem states, and enable prioritisation of critical sources for management., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

Degradation of coastal ecosystems in the Great Barrier Reef (GBR), Australia, has been linked with a decline in water quality from land-based runoff. This paper examines the reduction in current end-of-catchment loads required for total suspended solids (TSS) and dissolved inorganic nitrogen (DIN) to achieve GBR water quality guidelines. Based on first-order estimates of sustainable pollutant loads, current TSS and DIN loads would need to be reduced by approximately 7000ktons/y (41%) and 6000tons/y (38%), respectively. Next, these estimated reductions for TSS and DIN are compared with Reef Plan targets for anthropogenic sediment (-20% by 2020) and nitrogen (-50% by 2013) loads. If successful, these targets will accomplish approximately 40% of TSS and 92% of DIN load reductions required to achieve sustainable loads to the GBR lagoon. These first-order estimates elucidate the need to establish ecologically relevant targets for river pollutant loads to the GBR for management and policy., (Copyright © 2011 Elsevier Ltd. All rights reserved.)