Search

In 2019, the Deep History of Sea Country (DHSC) Project team found and published two submerged archaeological sites in Murujuga (Dampier Archipelago) Western Australia [[1]]. Please see the authors' respective ORCID iDs here: Author Jo McDonald's ORCID iD is 0000-0002-2701-7406 (https://orcid.org/0000-0002-2701-7406) Author Patrick Morrison's ORCID iD is 0000-0003-0920-3405 (https://orcid.org/0000-0003-0920-3405) Additionally, the contributions for author Patrick Morrison are updated as follows: Data curation, Formal analysis, Methodology, Investigation, Software, Visualization, Writing-original draft, Writing-review & editing. This supersedes the original data in the article, and it is not possible to identify which of the samples constituted the original dataset of 455 terrestrial artefacts. [Extracted from the article]

Point clouds acquired through laser scanning techniques are applied in the three-dimensional modelling of vegetation. They provide the three-dimensional coordinates of geometric surfaces with attributes. However, raw point clouds are unstructured and do not provide semantic, geometric, or topological information about an object. Voxelisation is a method for structuring point clouds. It is a generalisation of point clouds and therefore the voxel size and the voxel neighbourhood play a critical role in the processing. This research explores the influence of voxelisation of point clouds acquired of heathland in Australia and how it influences the three-dimensional modelling and the representation of important heathland structure using different voxel sizes and voxel connectivities. Voxel sizes of 0.4 m, 0.6 m, 1.0 m, 1.2 m and 1.6 m with a voxel neighbourhood connectivity of 6, 18 and 26 are examined for three-dimensional modelling and segmentation of heathland vegetation in Australia. The results indicate that the choice of voxel size and the voxel connectivity influence the representation of important heathland parameters. A smaller voxel size of 0.4 m provides a detailed representation of mallee structure while the the processing time is longer compared to a larger voxel size. While a larger voxel size produces blobs while the processing speed is shorter. The results from the voxel neighbourhood connectivity represent a stronger voxel connectivity of 26-connected voxels suitable for heathland modelling rather than a 6-connected voxels. [ABSTRACT FROM AUTHOR]

In regions where there are multiple sources of methane (CH4) in close proximity, it can be difficult to apportion the CH4 measured in the atmosphere to the appropriate sources. In the Surat Basin, Queensland, Australia, coal seam gas (CSG) developments are surrounded by cattle feedlots, grazing cattle, piggeries, coal mines, urban centres and natural sources of CH4. The characterization of carbon (δ13C) and hydrogen (δD) stable isotopic composition of CH4 can help distinguish between specific emitters of CH4. However, in Australia there is a paucity of data on the various isotopic signatures of the different source types. This research examines whether dual isotopic signatures of CH4 can be used to distinguish between sources of CH4 in the Surat Basin. We also highlight the benefits of sampling at nighttime. During two campaigns in 2018 and 2019, a mobile CH4 monitoring system was used to detect CH4 plumes. Sixteen plumes immediately downwind from known CH4 sources (or individual facilities) were sampled and analysed for their CH4 mole fraction and δ13CCH4 and δDCH4 signatures. The isotopic signatures of the CH4 sources were determined using the Keeling plot method. These new source signatures were then compared to values documented in reports and peer-reviewed journal articles. In the Surat Basin, CSG sources have δ13CCH4 signatures between -55.6 ‰ and -50.9 ‰ and δDCH4 signatures between -207.1 ‰ and -193.8 ‰. Emissions from an open-cut coal mine have δ13CCH4 and δDCH4 signatures of -60.0±0.6 ‰ and -209.7±1.8 ‰ respectively. Emissions from two ground seeps (abandoned coal exploration wells) have δ13CCH4 signatures of -59.9±0.3 ‰ and -60.5±0.2 ‰ and δDCH4 signatures of -185.0±3.1 ‰ and -190.2±1.4 ‰. A river seep had a δ13CCH4 signature of -61.2±1.4 ‰ and a δDCH4 signature of -225.1±2.9 ‰. Three dominant agricultural sources were analysed. The δ13CCH4 and δDCH4 signatures of a cattle feedlot are -62.9±1.3 ‰ and -310.5±4.6 ‰ respectively, grazing (pasture) cattle have δ13CCH4 and δDCH4 signatures of -59.7±1.0 ‰ and -290.5±3.1 ‰ respectively, and a piggery sampled had δ13CCH4 and δDCH4 signatures of -47.6±0.2 ‰ and -300.1±2.6 ‰ respectively, which reflects emissions from animal waste. An export abattoir (meat works and processing) had δ13CCH4 and δDCH4 signatures of -44.5±0.2 ‰ and -314.6±1.8 ‰ respectively. A plume from a wastewater treatment plant had δ13CCH4 and δDCH4 signatures of -47.6±0.2 ‰ and -177.3±2.3 ‰ respectively. In the Surat Basin, source attribution is possible when both δ13CCH4 and δDCH4 are measured for the key categories of CSG, cattle, waste from feedlots and piggeries, and water treatment plants. Under most field situations using δ13CCH4 alone will not enable clear source attribution. It is common in the Surat Basin for CSG and feedlot facilities to be co-located. Measurement of both δ13CCH4 and δDCH4 will assist in source apportionment where the plumes from two such sources are mixed. [ABSTRACT FROM AUTHOR]

Over the last 20,000 years, one third of the continental land mass of Australia, or 2.12 million km2, has been drowned by postglacial sea-level rise. Much of this drowned territory is thought to have been occupied by humans. Where archaeological remains have survived inundation, they can be investigated by underwater and airborne remote sensing, survey, and ground-truthing. This study of the Dampier Archipelago of North West Australia is contextualized by a review of the current state of the art of underwater prehistory. In the absence of known sites, we propose terrestrial analogy as a predictive tool for targeting submerged archaeological sites. Geological and topographic contexts are important for assessing preservation potential as is identifying landforms and features around which people may have focused occupation. Analysis of more than 2,500 known archaeological sites from the extraordinarily rich Dampier Archipelago reveals that the vast majority are rock art sites, but these are interspersed by a significant number of artifact scatters, myriad stone structures, shell middens, and quarry and reduction areas. The majority of these sites are focused on coastal and interior valleys, associated uplands, and coastal embayments. While over two thirds of sites occur on granophyre and basalt substrates, the others are located on Quaternary sediments. Regional research on nearby continental islands shows that use of these environments can be expected to pre-date sea-level rise. The most likely submerged sites include: 1) compacted middens associated with rock pools and estuarine features; 2) stone structures with associated middens on limestone pavements or with granophyre and basalt boulder fields; 3) buried midden and other occupation deposits on protected sand sheets; 4) quarry outcrops, extraction pits, and associated reduction debris in areas of fine-grained granophyre and basalt; and 5) middens in consolidated calcarenite shoreline contexts to the north and west of the volcanic suites of the Dampier Archipelago. [ABSTRACT FROM AUTHOR]

The Dampier Archipelago (Murujuga) is on Australia's National Heritage List because of its significant rock art and numerous stone structures. When people first started living in this arid landscape of the northwest coast, 50,000 years ago, the shoreline was 160 kilometres further north-and west. The Archipelago was created around 7,000 years ago, with sea-level rise following the termination of the Last Glacial Maximum (LGM). Photogrammetry and microphotography (using LiDAR, RPA and Dino-Lite?) are used here to demonstrate how this combination of different scales of imaging can be used to better document the terrestrial Murujuga features record. This paper explores the utility of photogrammetry generated by LiDAR and RPA to locate and reconstruct two types of Aboriginal stone structure (standing stones and house structures) which are prevalent across the Archipelago. These combined techniques were deployed to better visualise and understand site distribution with a view to using the landscape scale methods for the detection of similar features in submerged contexts in the adjacent waters. It has been predicted that this more robust site type would be likely to survive being submerged by sea level rise, and hence this was a site type which we were interested in locating remotely. As well as undertaking systematic terrestrial survey and recording of sample areas across Rosemary Island, topographic LiDAR was flown on two occasions (2017, 2018). These flights were separated by a wildfire which burnt most of the spinifex cover across the island. It highlights the potential - and shortcomings - of remote sensing this type of cultural sites in a naturally rocky and spinifex-covered landscape. It makes recommendations about how to better implement LiDAR to assist in the understanding of the landscape context of these hunter-gatherer stone features. [ABSTRACT FROM AUTHOR]

This article reports Australia's first confirmed ancient underwater archaeological sites from the continental shelf, located off the Murujuga coastline in north-western Australia. Details on two underwater sites are reported: Cape Bruguieres, comprising > 260 recorded lithic artefacts at depths down to −2.4 m below sea level, and Flying Foam Passage where the find spot is associated with a submerged freshwater spring at −14 m. The sites were discovered through a purposeful research strategy designed to identify underwater targets, using an iterative process incorporating a variety of aerial and underwater remote sensing techniques and diver investigation within a predictive framework to map the submerged landscape within a depth range of 0–20 m. The condition and context of the lithic artefacts are analysed in order to unravel their depositional and taphonomic history and to corroborate their in situ position on a pre-inundation land surface, taking account of known geomorphological and climatic processes including cyclone activity that could have caused displacement and transportation from adjacent coasts. Geomorphological data and radiometric dates establish the chronological limits of the sites and demonstrate that they cannot be later than 7000 cal BP and 8500 cal BP respectively, based on the dates when they were finally submerged by sea-level rise. Comparison of underwater and onshore lithic assemblages shows differences that are consistent with this chronological interpretation. This article sets a foundation for the research strategies and technologies needed to identify archaeological targets at greater depth on the Australian continental shelf and elsewhere, building on the results presented. Emphasis is also placed on the need for legislation to better protect and manage underwater cultural heritage on the 2 million square kilometres of drowned landscapes that were once available for occupation in Australia, and where a major part of its human history must lie waiting to be discovered. [ABSTRACT FROM AUTHOR]

Fire regimes across the globe have been altered through changes in land use, land management, and climate conditions. Understanding how these modified fire regimes impact vegetation structure and dynamics is essential for informed biodiversity conservation and carbon management in savanna ecosystems. We used a fire experiment at the Territory Wildlife Park (TWP), northern Australia, to investigate the consequences of altered fire regimes for vertical habitat structure and above-ground carbon storage. We mapped vegetation three-dimensional (3-D) structure in high spatial resolution with airborne lidar across 18 replicated 1 ha plots of varying fire frequency and season treatments. We used lidar-derived canopy height and cover metrics to extrapolate field-based measures of woody biomass to the full extent of the experimental site (R2=0.82 , RMSE = 7.35 t C ha -1) and analysed differences in above-ground carbon storage and canopy structure among treatments. Woody canopy cover and biomass were highest in the absence of fire (76 % and 39.8 t C ha -1) and lowest in plots burnt late in the dry season on a biennial basis (42 % and 18.2 t C ha -1). Woody canopy vertical profiles differed among all six fire treatments, with the greatest divergence in height classes <5 m. The magnitude of fire effects on vegetation structure varied along the environmental gradient underpinning the experiment, with less reduction in biomass in plots with deeper soils. Our results highlight the large extent to which fire management can shape woody structural patterns in savanna landscapes, even over time frames as short as a decade. The structural profile changes shown here, and the quantification of carbon reduction under late dry season burning, have important implications for habitat conservation, carbon sequestration, and emission reduction initiatives in the region. [ABSTRACT FROM AUTHOR]

Spaceborne laser altimetry waveform estimates of canopy Gap Fraction (GF) vary with respect to discrete return airborne equivalents due to their greater sensitivity to reflectance differences between canopy and ground surfaces resulting from differences in footprint size, energy thresholding, noise characteristics and sampling geometry. Applying scaling factors to either the ground or canopy portions of waveforms has successfully circumvented this issue, but not at large scales. This study develops a method to scale spaceborne altimeter waveforms by identifying which remotely-sensed vegetation, terrain and environmental attributes are best suited to predicting scaling factors based on an independent measure of importance. The most important attributes were identified as: soil phosphorus and nitrogen contents, vegetation height, MODIS vegetation continuous fields product and terrain slope. Unscaled and scaled estimates of GF are compared to corresponding ALS data for all available data and an optimized subset, where the latter produced most encouraging results (R² = 0.89, RMSE = 0.10). This methodology shows potential for successfully refining estimates of GF at large scales and identifies the most suitable attributes for deriving appropriate scaling factors. Large-scale active sensor estimates of GF can establish a baseline from which future monitoring investigations can be initiated via upcoming Earth Observation missions. [ABSTRACT FROM AUTHOR]

Across their range, mangroves are responding to coastal environmental change. However, separating the influence of human activities from natural events and processes (including that associated with climatic fluctuation) is often difficult. In the Gulf of Carpentaria, northern Australia (Leichhardt, Nicholson, Mornington Inlet, and Flinders River catchments), changes in mangroves are assumed to be the result of natural drivers as human impacts are minimal. By comparing classifications from time series of Landsat sensor data for the period 1987-2014, mangroves were observed to have extended seawards by up to 1.9 km (perpendicular to the coastline), with inland intrusion occurring along many of the rivers and rivulets in the tidal reaches. Seaward expansion was particularly evident near the mouth of the Leichhardt River, and was associated with peaks in river discharge with Li DAR data indicating distinct structural zones developing following each large rainfall and discharge event. However, along the Gulf coast, and particularly within the Mornington Inlet catchment, the expansion was more gradual and linked to inundation and regular sediment supply through freshwater input. Landward expansion along the Mornington Inlet catchment was attributed to the combined effects of sea level rise and prolonged periods of tidal and freshwater inundation on coastal lowlands. The study concluded that increased amounts of rainfall and associated flooding and sea level rise were responsible for recent seaward and landward extension of mangroves in this region. [ABSTRACT FROM AUTHOR]

Savanna ecosystems comprise 22% of the global terrestrial surface and 25% of Australia (almost 1.9 million km2) and provide significant ecosystem services through carbon and water cycles and the maintenance of biodiversity. The current structure, composition and distribution of Australian savannas have coevolved with fire, yet remain driven by the dynamic constraints of their bioclimatic niche. Fire in Australian savannas influences both the biophysical and biogeochemical processes at multiple scales from leaf to landscape. Here, we present the latest emission estimates from Australian savanna biomass burning and their contribution to global greenhouse gas budgets. We then review our understanding of the impacts of fire on ecosystem function and local surface water and heat balances, which in turn influence regional climate. We show how savanna fires are coupled to the global climate through the carbon cycle and fire regimes. We present new research that climate change is likely to alter the structure and function of savannas through shifts in moisture availability and increases in atmospheric carbon dioxide, in turn altering fire regimes with further feedbacks to climate. We explore opportunities to reduce net greenhouse gas emissions from savanna ecosystems through changes in savanna fire management. [ABSTRACT FROM AUTHOR]

Savannas are highly significant global ecosystems that consist of a mix of trees and grasses and that are highly spatially varied in their physical structure, species composition, and physiological function (i.e., leaf area and function, stem density, albedo, and roughness). Variability in ecosystem characteristics alters biophysical and biogeochemical processes that can affect regional to global circulation patterns, which are not well characterized by land surface models. We initiated a multidisciplinary field campaign called Savanna Patterns of Energy and Carbon Integrated across the Landscape (SPECIAL) during the dry season in Australian savannas to understand the spatial patterns and processes of land surface-atmosphere exchanges (radiation, heat, moisture, CO2, and other trace gasses). We utilized a combination of multiscale measurements including fixed flux towers, aircraft-based flux transects, aircraft boundary layer budgets, and satellite remote sensing to quantify the spatial variability across a continental-scale rainfall gradient (transect). We found that the structure of vegetation changed along the transect in response to declining average rainfall. Tree basal area decreased from 9.6 m2 ha−1 in the coastal woodland savanna (annual rainfall 1,714 mm yr−1) to 0 m2 ha−1 at the grassland site (annual rainfall 535 mm yr−1), with dry-season green leaf area index (LAI) ranging from 1.04 to 0, respectively. Leaf-level measurements showed that photosynthetic properties were similar along the transect. Flux tower measurements showed that latent heat fluxes ( LEs) decreased from north to south with resultant changes in the Bowen ratios ( H/ LE) from a minimum of 1.7 to a maximum of 15.8, respectively. Gross primary productivity, net carbon dioxide exchange, and LE showed similar declines along the transect and were well correlated with canopy LAI, and fluxes were more closely coupled to structure than floristic change. [ABSTRACT FROM AUTHOR]

Observations of northward-moving borelike convergence lines over the southern part of the Gulf of Carpentaria region of northern Australia are described. Eleven such disturbances were documented during the 45-day period of the 2002 Gulf Lines Experiment. Of these, six were classified as major and five as minor, depending on their coherence throughout the region. The mean synoptic conditions leading to the two types of events were found to differ. The data for the events provide further insight into the structure and origin of borelike disturbances in the region. Two of the major events, those of 28–29 September and 9 October, are particularly noteworthy. The first of these had a clear double-change structure at all surface stations in the southeastern gulf region with an undular borelike wave preceding and separating from an airmass change in the form of a dryline. It is probably one of the best documented cases of its type. The second, which was documented in unprecedented detail by an instrumented research aircraft, consisted of three separate disturbances: one moving from the southeast, one from the south, and one from the northeast, all of which collided over the gulf. It is believed that the aircraft measurements are the first of their kind anywhere in the world. The aircraft made two long low-level transects through the disturbances and a higher-level transect where they were colliding. Various soundings were also made. The aircraft data showed clearly the undular borelike nature of the southeasterly disturbance. Measured vertical velocities in the waves were as high as 3 m s-1 at a mean altitude of about 230 m. Vertical velocities as high as 5 m s-1 were measured in the region of the collision at an altitude of about 1 km. The longevity of the bores is not explained by the vertical structure of the Scorer parameter, which indicates a leaky waveguide. [ABSTRACT FROM AUTHOR]

Observations of dry-season north Australian cloud lines (NACLs) that form in the Gulf of Carpentaria region of northern Australia and the sea-breeze circulations that initiate them are described. The observations were made during the 2002 Gulf Lines Experiment (GLEX) and include measurements made by an instrumented research aircraft. The observations are compared with numerical simulations made from a two-dimensional cloud-scale model. Particular emphasis is placed on the interaction between the east coast and west coast sea breezes near the west coast of Cape York Peninsula. The sea breezes are highly asymmetric due to the low-level easterly synoptic flow over the peninsula. The west coast sea breeze is well defined with a sharp leading edge since the opposing flow limits its inland penetration, keeping it close to its source of cold air. In contrast, the east coast sea breeze is poorly defined since it is aided by the easterly flow and becomes highly modified by daytime convective mixing as it crosses over the peninsula. Both the observations and the numerical model show that, in the early morning hours, the mature NACL forms at the leading edge of a gravity current. The numerical model simulations show that this gravity current arises as a westward-moving land breeze from Cape York Peninsula. Convergence at the leading edge of this land breeze is accompanied by ascent, which when strong enough produces cloud. Observations show that the decay of the NACL is associated with a decline in the low-level convergence and a weakening of the ascent. [ABSTRACT FROM AUTHOR]

Reef islands are some of the most highly sensitive landforms to the impacts of future environmental change. Previous assessments of island morphodynamics primarily relied on historical aerial and satellite imagery. These approaches limit analysis to two-dimensional parameters, with no ability to assess long-term changes to island volume or elevation. Here, we use high-resolution airborne LiDAR data to assess three-dimensional reef island features for 22 islands along the north-western coast of Australia. Our primary objective was to utilize two regional LiDAR datasets to identify characteristics indicative of island sensitivity and future vulnerability. Results show reef platform area to be an accurate predictor of island area and volume suggesting larger island volumes may reflect (1) increased carbonate production and supply from the reef platform and/or (2) enhanced shoreline protection by larger reef platforms. Locations of foredune scarping (an erosional signature) and island orientations were aligned to the regional wind and wave climate. Reef island characteristics (island area, volume, elevation, scarping, and platform area) were used to rank islands according to sensitivity, using a new Island Sensitivity Characteristics Index (ISCi) where low ISCi indicates stable islands (large areas and volumes, high elevations, and fewer scarped areas) and high ISCi indicates unstable islands (small areas and volumes, low elevations, and more scarped areas). Comparison of two LiDAR surveys from 2016 and 2018 validates the use of 3D morphometrics as important (direct) measurements of island landform change, and can complement the use of 2D parameters (e.g., area) moving forward. Results demonstrate that ongoing use of airborne LiDAR and other 3D technology for monitoring coral reef islands at regional scales will enable more accurate quantification of their sensitivity to future impacts of global environmental change. [ABSTRACT FROM AUTHOR]