Search

River gravel mobility is an important control on river behaviour, morphology, and ecosystem processes. Gravel stability is dependent on abiotic flow and sediment properties, alongside less widely acknowledged biotic processes. The quagga mussel (Dreissena bugensis), a highly invasive bivalve, frequently occurs at high population densities in rivers and lakes. Quagga mussels attach to benthic sediments using byssal threads, which might affect sediment stability and thereby broader river geomorphology. We aimed to (1) characterize controls of quagga mussel sediment attachment by conducting a field survey in an invaded river, (2) investigate resultant changes in the critical shear stress needed to entrain fluvial bed materials via an ex situ flume experiment, for measured average (135 m−2) and potential future (270 m−2) mussel densities, and (3) model how this may affect sediment transport rates. From field surveys, mean quagga mussel density was 122 m−2, attaching to an average of 591 g m−2 of mineral bed sediments. Across the survey reach, mussels attached to all grain sizes available, with attachment driven by grain availability, rather than active selection of particular grain sizes. In the ex situ flume experiment, densities of 135 mussels m−2 did not significantly increase the critical shear stress of fluvial bed materials, but a density of 270 mussels m−2 significantly increased critical shear stress by 40%. Estimates of the proportion of time these critical stresses are exceeded at the field site indicated high densities of quagga mussels may reduce the occurrence of a geomorphically active flood event from Q30 to Q2. These results present feasible invasion scenarios, as quagga mussels frequently reach benthic densities orders of magnitude greater than observed here. This study indicates that substantial alterations to bedload sediment transport may occur following quagga mussel invasion. Future geomorphic modelling should include biology to better understand rates and processes of landscape development. [ABSTRACT FROM AUTHOR]

Invertebrates are important sediment engineers, making up for their small body size with abundance and behavioral diversity. However, despite the recognized importance of invertebrates as sediment engineers in terrestrial and marine environments, zoogeomorphology in rivers has primarily considered larger taxa, such as fish and beaver. This article reviews the zoogeomorphic effects of invertebrates in freshwater habitats, with a focus on rivers. To better synthesize current zoogeomorphic research and to help guide future studies we build a conceptual model considering biotic (behavior, abundance, body size, life history, and species invasions) and abiotic (geophysical energy and sediment grain size) controls on the direction and magnitude of zoogeomorphology. We also incorporate invertebrate engineers into conceptual sediment entrainment models, to understand their geomorphic role in the context of hydraulic power and sediment size. We structure our review around invertebrate behavior as a key control on whether invertebrates have a sediment destabilizing or stabilizing impact. Invertebrate zoogeomorphic behavior are diverse; the majority of research concerns bioturbation, a result of locomotion, foraging, and burrowing behaviors by many taxa. Similarly, burrowing into bedrock by a caddisfly and non‐biting midge larvae promotes bioerosion. Attachment to the substrate, (e.g., silk nets by caddisfly larvae or byssal threads by some mussels) can stabilize sediment, providing bioprotection. Bioconstructions (e.g., caddisfly cases and mussel shells) may have either stabilizing or destabilizing effects depending on their density and abiotic context. Interactions between lotic invertebrates and fluvial processes are complex and understudied, requiring further research across a greater range of taxa, behaviors, and spatiotemporal scales. This article is categorized under:Water and Life > Nature of Freshwater EcosystemsWater and Life > Conservation, Management, and Awareness [ABSTRACT FROM AUTHOR]

Caddisfly (Trichoptera) larvae are an abundant and widespread aquatic insect group characterized by the construction of silk structures, including nets and cases. Case‐building caddisfly have the potential to modify the sorting and mobility of sand and fine gravel via: (1) case construction, resulting in altered sediment properties; (2) transporting sediment incorporated into cases over the river bed; and (3) changing the structure of river beds via burrowing activity. To investigate these mechanisms, it is necessary to understand the mass, size distribution and spatial variability of sediment use by case‐building caddisfly larvae. We quantified the mineral sediment used by individuals and communities of case‐building caddisfly in 27 samples, from three sites on a gravel‐bed stream. The mass and size distribution of sediment in individual cases varied between taxa (mass = 0.001–0.83 g, D50 = 0.17–4 mm). The mean mass of sediment used by the caddisfly community was 38 g m−2 and varied locally. Sediment use was predominantly coarse sand (D50 = 1 mm). 64% of sediment use was attributable to Agapetus fuscipes (Glossosomatidae). Due to within‐species variability in case mass, the abundance of most taxa, including A. fuscipes, was only weakly associated with the mass of sediment used by this species, at the river scale. Whilst the caddisfly community used a small percentage of the total sediment available (average 2.99% of the 1–1.4 mm size fraction), A. fuscipes used more fine sediment in their cases at sites where it was more available. Despite variability in local habitat, all sites supported diverse case‐building caddisfly communities utilizing mineral sediment. Consequently, geomorphological effects of case‐building caddisfly are potentially widespread. The results provide novel insights into the specific grain sizes and quantities of fine sediment used by caddisfly larvae, which represents an important step towards understanding their zoogeomorphic activities. © 2019 The Authors. Earth Surface Processes and Landforms Published by John Wiley & Sons Ltd. [ABSTRACT FROM AUTHOR]

Landscapes and ecosystems are the result of two-way interactions between hydro-geomorphic and biological processes. Many animals, particularly those that build structures or transport sediment, are important biogeomorphic agents. Glossosomatidae caddisfly larvae (Insecta, Trichoptera) are globally widespread and abundant inhabitants of gravel-bed rivers. Glossosomatidae build mobile cases from sand that they transport over the river bed. However, there is limited understanding on how Glossosomatidae bioconstructions may influence sand distribution in rivers or how their zoogeomorphic behaviours are influenced by hydraulics or characteristics of the river bed. First, we conducted surveys to quantify the magnitude of sand incorporated into Glossosomatidae (Agapetus fuscipes) cases within a UK river. Second, we studied A. fuscipes movement behaviour and quantified the direction and magnitude of sediment reworking, in a flume, under differing flow velocity and gravel size treatments. We found that 99 % of A. fuscipes larvae transported sediment vertically upwards. This resulted in an average conveyance per larvae of 0.06 g sand upwards by 25 mm (maximum of 50 mm). In gravel beds with a coarse surface layer, this resulted in displacement of sand from sheltered interstices onto the surface of exposed gravel particles. In the flume, this behaviour was maintained even at high flows, sufficient to entrain empty cases from these locations. Whilst the mass of sediment moved by individual larvae is small, dense populations of Glossosomatidae larvae may have important consequences for the vertical distribution of sand in rivers. At our field site, A. fuscipes case density averaged 2192 cases m−2, equivalent to 1.4 t km−1. This finding is important because in gravel-bed rivers frequented by Glossosomatidae larvae, sediment transport is typically limited by the availability of entrainable fine grain sediment at the surface. We discuss the implications of this sediment movement for river bed sedimentary structure, the transport of sand and gravel, and the possible role of Glossosomatidae larvae as ecosystem engineers. [Display omitted] • Case building Glossosomatidae larvae are upwards conveyers of sand. • In hydraulic flume experiments 99 % of larvae moved cases vertically upwards. • The elevation of larvae positioning was affected by gravel size but not by flow velocity. • Populations of larvae can rework up to 1.4 t km−1 sand. • Larvae increase availability of sand at the river-bed surface and counteract armouring processes. [ABSTRACT FROM AUTHOR]