Search

This study investigates the effectiveness of microwave treatment (MW) on the antifungal properties of Norway spruce wood and the leaching of preservatives. Given the environmental and health concerns about conventional wood preservatives, this study evaluates microwave treatment as a sustainable pretreatment to limit the leaching of preservatives from wood. In the experiment, wood samples were treated with microwaves at five different energy levels before being impregnated with copper–ethanolamine- and boron-based preservatives. We assessed preservative retention by leaching tests and assessed the resistance of the wood to fungal attack. The results show that MW treatment improves the uptake and fixation of preservatives, reduces leachability, and significantly improves the durability of an otherwise perishable wood against fungal attack. This study emphasises the potential of microwave treatment for wood preservation. It offers an environmentally friendly approach to extending the life of wood products while maintaining their protective properties against decay. [ABSTRACT FROM AUTHOR]

Featured Application: In recent decades, the importance of wood has also been increasing for outdoor intended use. A more sustainable approach has turned the attention from faraway tropical forests to local wood, that is, European species. Unfortunately, most of the species are not durable; thus, in order to utilize them in outdoor conditions, protection must be provided. Stone pine (Pinus pinea) is one of the most common tree species in the Mediterranean region, with a great potential in applications with higher added value, instead of being used only for burning or packaging. This investigation explores methods for an improvement of the service life of stone pine sapwood using impregnation and modification techniques. The sudden availability of Italian stone pine (Pinus pinea L.) wood due to the infestation of pathogenic fungi and insects highlighted the need to promote its use as a short supply chain resource in Italy and other Mediterranean countries. However, the durability of stone pine sapwood must be enhanced if outdoor use is to be considered. The impregnability of stone pine wood was studied following the standard EN 351-1:2008, using immersion, vacuum, and high-pressure methods with natural waxes and organic solvent-based and copper-amino-based preservative solutions. The efficacy of the impregnation was determined by calculating the kilos of preservative absorbed per cubic meter of wood and by measuring the penetration depth of the preservative. Thermal modifications were carried out using five different maximum temperatures, and their efficacy was determined by measuring the mass loss and color change. Subsequent to thermal treatments, the wood was exposed to a water-vapor-saturated atmosphere, and the increase in mass was calculated for different periods. Stone pine and Scots pine sapwoods showed similar response to the treatments with the exception of soaking impregnation methods where stone pine showed higher uptake, in particular when Silvanolin was used. Our investigation shows that stone pine can be a suitable short supply chain resource in Italy that, when impregnated, could be tested for outdoor use, exactly as is the case with Scots pine. [ABSTRACT FROM AUTHOR]

Wood in outdoor applications is subject to various decomposition factors. Wood degradation can be prevented by construction details, biocide protection of wood, wood modification or selection of naturally durable species. Unfortunately, most species in Europe do not have naturally durable wood. Imported tree species represent a new pool from which we can draw wood species with better natural durability and better resilience towards climate change. The performance of wood when used outdoors depends on the biologically active compounds (extractives) and the water exclusion efficacy. Considering decay, presence of biologically active compounds and water exclusion efficacy, we can estimate the density, modulus of elasticity, extractive content and resistance dose, which reflects the material properties of wood. Recently, the most commonly used model for this purpose is Meyer-Veltrup. Literature data indicate that the durability of the wood from native and new sites is not always comparable, so it is necessary to determine the resistance of non-native wood species from new sites. This paper presents original data on the wood's overall durability from American Douglas fir (Pseudotsuga menziesii) grown in Slovenia. Experimental data show that the mature heartwood of Douglas fir is more durable than the wood of European larch (Larix decidua). Durability can be attributed to good water exclusion efficacy and inherent durability. Inherent durability is primarily the result of the high content of extractives. Based on the results, it can be concluded that American Douglas fir grown in Central Europe has a high potential for outdoor use. [ABSTRACT FROM AUTHOR]

Durability-based designs with timber require reliable information about the wood properties and how they affect its performance under variable exposure conditions. This study aimed at utilizing a material resistance model (Part 2 of this publication) based on a dose–response approach for predicting the relative decay rates in above-ground situations. Laboratory and field test data were, for the first time, surveyed globally and used to determine material-specific resistance dose values, which were correlated to decay rates. In addition, laboratory indicators were used to adapt the material resistance model to in-ground exposure. The relationship between decay rates in- and above-ground, the predictive power of laboratory indicators to predict such decay rates, and a method for implementing both in a service life prediction tool, were established based on 195 hardwoods, 29 softwoods, 19 modified timbers, and 41 preservative-treated timbers. [ABSTRACT FROM AUTHOR]

Service life planning with timber requires reliable models for quantifying the effects of exposure-related parameters and the material-inherent resistance of wood against biotic agents. The Meyer-Veltrup model was the first attempt to account for inherent protective properties and the wetting ability of wood to quantify resistance of wood in a quantitative manner. Based on test data on brown, white, and soft rot as well as moisture dynamics, the decay rates of different untreated wood species were predicted relative to the reference species of Norway spruce (Picea abies). The present study aimed to validate and optimize the resistance model for a wider range of wood species including very durable species, thermally and chemically modified wood, and preservative treated wood. The general model structure was shown to also be suitable for highly durable materials, but previously defined maximum thresholds had to be adjusted (i.e., maximum values of factors accounting for wetting ability and inherent protective properties) to 18 instead of 5 compared to Norway spruce. As expected, both the enlarged span in durability and the use of numerous and partly very divergent data sources (i.e., test methods, test locations, and types of data presentation) led to a decrease in the predictive power of the model compared to the original. In addition to the need to enlarge the database quantity and improve its quality, in particular for treated wood, it might be advantageous to use separate models for untreated and treated wood as long as the effect of additional impact variables (e.g., treatment quality) can be accounted for. Nevertheless, the adapted Meyer-Veltrup model will serve as an instrument to quantify material resistance for a wide range of wood-based materials as an input for comprehensive service life prediction software. [ABSTRACT FROM AUTHOR]

Simple Summary: Over the past thirty years, the thermal modification of wood has become a universally recognised and commercialised wood modification process. Thermal modifications may affect wood properties, either positively (dimensional stability and decay resistance) or negatively (mechanical properties). The combination of the impregnation of specific reagents with thermal modification may help to overcome the negative effects on wood properties. In this study, we evaluate the effect of a combination of two zwitterionic buffers, bicine and tricine, and thermal modification of two wood species (beech and spruce) against subterranean termites and their symbiotic fauna. Bicine and tricine treatments alone had a clear influence on wood mass loss and termite survival. The flagellate protist symbiotic community was affected by the treatments and responded differently to them, as a highly adaptable community. However, the combination of bicine with the thermal modification showed a negative effect on termites and their symbionts on both wood species. The combination of these different factors should be further investigated, as these results seem to be promising with regard to the enhancement of the termite resistance of wood. The majority of thermal modification processes are at temperatures greater than 180 °C, resulting in a product with some properties enhanced and some diminished (e.g., mechanical properties). However, the durability of thermally modified wood to termite attack is recognised as low. Recent attempts at combining thermal modification with chemical modification, either prior to or directly after the thermal process, are promising. Buffers, although not influencing the reaction systems, may interact on exposure to certain conditions, potentially acting as promoters of biological changes. In this study, two zwitterionic buffers, bicine and tricine, chosen for their potential to form Maillard-type products with fragmented hemicelluloses/volatiles, were assessed with and without thermal modification for two wood species (spruce and beech), with subsequent evaluation of their effect against subterranean termites (Reticulitermes grassei Clément) and their symbiotic protists. The effect of the wood treatments on termites and their symbionts was visible after four weeks, especially for spruce treated with tricine and bicine and heat treatment (bicine HT), and for beech treated with bicine and bicine and heat treatment (bicine HT). The chemical behaviour of these substances should be further investigated when in contact with wood and also after heat treatment. This is the first study evaluating the effect of potential Maillard reactions with zwitterionic buffers on subterranean termite symbiotic fauna. [ABSTRACT FROM AUTHOR]

Wood is one of the most important construction materials, and its use in building applications has increased in recent decades. In order to enable even more extensive and reliable use of wood, we need to understand the factors affecting wood's service life. A new concept for characterizing the durability of wood-based materials and for predicting the service life of wood has recently been proposed, based on material-inherent protective properties, moisture performance, and the climate- and design-induced exposure dose of wooden structures. This approach was validated on the decking of a model house in Ljubljana that was constructed in October 2013. The decay and moisture content of decking elements were regularly monitored. In addition, the resistance dose DRd, as the product of the critical dose Dcrit, and two factors taking into account the wetting ability of wood (kwa) and its inherent durability (kinh), were determined in the laboratory. DRd correlated well with the decay rates of the decking of the model house. Furthermore, the positive effect of thermal modification and water-repellent treatments on the outdoor performance of the examined materials was evident, as well as the synergistic effects between moisture performance and inherent durability. [ABSTRACT FROM AUTHOR]

The development of non-biocidal and environmentally friendly systems to protect wood against biological decay has become a high priority in recent years. In the present study the impact of an innovative modification procedure, combining two environmentally friendly modification methods: thermal modification and mineralisation, using an aqueous solution of calcium acetoacetate as a precursor, on the fungal durability of wood was evaluated. European beechwood (Fagus sylvatica) and Norway sprucewood (Picea abies) were selected as model wood species. Wood samples were treated using either a single or combination of both methods and exposed to four different fungi: Gloeophyllum trabeum , Rhodonia placenta , Trametes versicolor and Pleurotus ostreatus. The effect of the different modifications on moisture content, dynamic vapour sorption, contact angle and pH value was also evaluated. Overall, the highest durability against Rhodonia placenta , Trametes versicolor and Pleurotus ostreatus was achieved through thermal modification in both wood species, while the combination of mineralisation and thermal modification has a synergistic effect against degradation by Gloeophyllum trabeum. In the case of beechwood the mass loss decreased from 41% for native to 6% for combined modified samples. We proved that the effectiveness of different treatment against fungal decay of wood were in strong dependence of their moisture content, dynamic vapour sorption, contact angle and pH values. The role of fungi on the morphology of the wood and on crystal structure of formed carbonate was investigated using SEM-EDS analysis. [Display omitted] • Presented ecological modification of wood can be an alternative to biocides. • A significant improvement in the fungal durability of wood was achieved. • Thermal modification and mineralisation work synergistic against wood decay fungi. • The reasons for a synergistic effect of combining methods were proposed. • The mass loss decreased from 41% for native to 6% for combined modified beechwood. [ABSTRACT FROM AUTHOR]

Results of the research aimed to increase the resistance of beech and thermally modified (TM) beech wood to UV-light and weathering with impregnation with commercially available nano TiO2 suspensions, originally intended to be used as UV protective coating additives, are presented in this paper. Beech wood and TM beech wood samples were vacuum-pressure impregnated with suspensions, containing around 3% of TiO2, and in one series, the specimens were at first impregnated and thermally modified afterwards. In general, resistance to UV-light, as demonstrated by visual observation and by colour measurements was increased. Contact angle of water, liquid water absorption, and water vapour sorption also importantly influence on weathering behaviour of wood and it was shown that in general, impregnation with TiO2 particles has a positive influence with this respect. Anyway, some results of this preliminary research were ambiguous, and subsequent investigations of this novel protection method are needed and planned. [ABSTRACT FROM AUTHOR]