Search

This paper presents a detailed map (Main Map) showing geology, tectonics, weathering intensity and spatial distribution of landslides in the San Pietro in Guarano study area (about 7.5 km2), located in the north-western sector of Calabria (southern Italy). In this area, deeply weathered high-grade metamorphic rocks and different types/categories of mass movements are widespread. The Main Map, at 1:5000 scale, results from the combination of information gathered via analysis and interpretation of aerial photographs at different times and scales, multi-temporal geostructural and geomorphological surveys, field investigations and mapping of weathering grade in outcrop - through observation of geologically distinctive characteristics and qualitative and semi-quantitative engineering geological tests - integrated by means of the analysis of both weathering profiles on cutslopes and boreholes logs. The Main Map can represent a useful tool for authorities in charge of land-use planning and can profitably concur to typify landslides and to assess quantitative landslide risk. [ABSTRACT FROM AUTHOR]

Shallow landslides (i.e., slide, flow, and complex) are widespread around the world, affecting the soil mantle and upper regolith as a result of the weathering of granitic bedrock, and periodically cause enormous social and economic damages. Shallow landslide hazards are predominantly due to the scarcity of warning signs during the pre-failure stage, high velocities reached in the post-failure phase, and an increase in mobilized volumes caused by the entrapment of material in the downhill path of the phenomena. Owing to the abovementioned aspects, susceptibility assessment of shallow landslides in weathered granitic rocks is a relevant issue for land use planning and design purposes. This study proposes a three-step methodology for the susceptibility assessment of these phenomena. The methodology has been tested and validated at the 1:10,000 scale over a 30.4-km2 area in southern Italy, where weathered granitic rocks are periodically affected by shallow landslides. This methodology is divided into three successive steps: step 1 consists of database creation, with an emphasis on the weathering grade map (including five weathering classes, from class II to class VI, each one characterized by comparable mechanical behavior), and steps 2 and 3 focus respectively on susceptibility map calibration and validation through statistical analyses. The area under the ROC curve (AUC) shows values ranging from 0.95 in step 2 (calibration) to 0.88 in step 3 (validation) and is a testament to the good overall predictive accuracy of the methodology. The obtained results demonstrate both the effectiveness and the consistency of the proposed methodology in performing susceptibility mapping of shallow landslides in weathered granitic rocks, as well as the important role played by the weathering grade map. [ABSTRACT FROM AUTHOR]

Deep-seated rock slides (DSRSs), recognised as one of the most important mass wasting processes worldwide, involve large areas and cause several consequences in terms of environmental and economic damage; they result from a complex of controlling features and processes. DSRSs are common in Calabria (southern Italy) where the complex geo-structural setting plays a key role in controlling the geometry of the failure surface and its development. This paper describes an integrated multi-disciplinary approach to investigate a DSRS in Palaeozoic high-grade metamorphic rocks of the Sila Massif; it focuses on the definition of the internal structure and the predisposing factors of the Serra di Buda landslide near the town of Acri, which is a paradigm for numerous landslides in this area. An integrated interdisciplinary study based on geological, structural, and geomorphological investigations—including field observations of weathering grade of rocks, minero-petrographic characterisations, geotechnical investigations and, in particular, fifteen years of displacement monitoring—is presented. Stereoscopic analysis of aerial photographs and field observations indicate that the Serra di Buda landslide consists of two distinct compounded bodies: (i) an older and dormant body (~ 7 ha) and (ii) a more recent and active body (~ 13 ha) that overlies the previous one. The active landslide shows movement linked to a deep-seated translational rock slide (block slide); the velocity scale ranges from slow (1.6 m/year during paroxysmal stages) to extremely slow (< 16 mm/year during stable creep stages). The geological structures and rock weathering have played a key role in the landslide's initiation and further development. Steep slope angles, rugged topography, river deepening and erosion at the toe of the slope are also responsible for the formation of this landslide. In particular, the landslide shows a strongly tectonic constraint: the flanks are bounded by high-angle faults, and the main basal failure surface developed inside an E–W southward-dipping thrust fault zone. The entire active rock mass (total volume of approximately 6 Mm 3 ) slid at one time on a failure surface that dipped < 27°, and the maximum depth, as determined by inclinometer measurements, was approximately 58 m. Petrographic and mineralogical analyses suggest that the rocks in the thrust zones, where the failure surfaces develop, are highly affected by weathering processes that significantly reduce the rock strength and facilitate the extensive failure of the Serra di Buda landslide. Finally, the landslide's internal structure, according to geotechnical investigations and displacement monitoring, is proposed. The proposed approach and the obtained results can be generalised to typify other deep landslides in similar geological settings. [ABSTRACT FROM AUTHOR]

This paper illustrates the methodology and techniques for the compilation of a thematic (engineering) geological map based on detailed mapping of the weathering grade of crystalline rocks occurring in a portion of the Sila Massif close to the San Giovanni in Fiore Village (Calabria, Italy). The map (1:5000 scale), covering an area of about 20 km2, was compiled combining new geological and structural data with the results of a weathering grade field survey. The methodology, used to distinguish and map the weathering grade classes, was performed using qualitative criteria, semi-quantitative tests, and petrographic analysis of weathered rock samples. The Main Map, presented in this paper, aims to provide a useful tool for land-use planning, for geological hazard assessment and engineering perspectives. [ABSTRACT FROM AUTHOR]

This paper illustrates the compilation of an engineering geological map based on structural architecture and weathering grade of crystalline rocks occurring in the central-western portions of the Mucone River basin (Sila Massif, Calabria, Italy). The map, drawn at 1:10,000 scale and covering an area of about 100 km2, was compiled by combining new geological and structural data with the results of a weathering-grade field survey. Five weathering classes, each characterized by comparable mechanical behaviour, have been mapped, from the class VI (residual and colluvial soils) to class II (slightly weathered rock). Both qualitative and semi-quantitative criteria (e.g. rock colour, discolouration processes, samples broken by hand and hammer, sound of the rock when it is struck by a geological hammer, Schmidt Hammer tests) were used to distinguish and map weathering-grade classes at outcrop scale. The thematic map presented in this paper aims to provide a useful tool for land planning policy, for the evaluation of geological and geotechnical hazard and for environmental and engineering perspectives of land use. [ABSTRACT FROM AUTHOR]

• An interdisciplinary research of weathering profiles was performed. • Weathered profiles are complex and reach a thickness of 70 m. • Physical changes coupled to chemical variations are described in detail. • The XRD patterns show high content of clay minerals (mixed-layer minerals). • The more weathered samples show higher CIA, CIW, PIA and CIW' values. The paper focuses on the weathering processes affecting gneissic rocks of the western Sila Grande Massif (Calabria, Italy) through the development of an interdisciplinary research based on field studies and investigations, minero-petrographical analyses and geochemical modeling. Both physical and chemical weathering affect gneissic rocks of the study area, where the combination of tectonic and past climatic conditions played an important key role in the development of complex and deep weathering profiles. Field surveys and cut slope analyses highlight articulated and complex geometric relationships between various classes of weathering (i.e., out-of-sequence weathering horizons giving rise to a partial, or even complete inversion of the "normal" weathering profile). The weathering profile has turned out particularly intense, as classes IV, V and VI are widespread. Among the class VI, the colluvial soils are prominent in comparison whit the residual soils. Borehole logs, that confirm the intensity and complexity of weathering profiles in deep, allow to estimate the presence of weathered rocks to be at least 70 m in thicknesses. The main mineralogical modifications linked to weathering processes concern the partial transformation of biotite and the partial destruction of feldspars (mainly plagioclases), associated with the neoformation of secondary mineralogical phases (clay minerals and Fe-oxides). Neoformed clay minerals (such as sericite, illite and mixed layer phases) and ferruginous products replaced feldspars and biotite during the most advanced weathering stage. Results of XRD analyses and geochemical modelling provide a good indication on the secondary mineral assemblage due to the increase of the weathering intensity (form class III to class VI) that reflects the different contributions of chemical elements provided by dissolution of silicate minerals into the surrounding groundwater system. The chemical composition of the studied rock samples and the oxides variations suggest a removal of some alkali (Na and K) and alkaline earth (Ca and Mg) into solution as a consequence of weathering reactions. The chemical analysis and the weathering indices (CIA, PIA, CIW and CIW') show a marked alteration process, with ferromagnesian minerals and feldspars probably dissolved and leached into the surrounding groundwater system. The CO2-controlled dissolution of plagioclase appears to be the most important reaction during chemical weathering. The progressive dissolution results then dominated by biotite, followed by a minor amounts K-feldspar, chlorite and garnet; whereas the sillimanite shows a neglectable amounts. The secondary solid phases observed during the geochemical modeling (illite, followed by vermiculite, ferrihydrite and saponite) are similar to those found in this natural system. The proposed approach could be used to characterize weathered crystalline rocks and related weathering profiles in similar geological setting, and the obtained results represent a key point for the evaluation of the control exerted by weathering on landscape evolution under current environmental settings in terms of sediment generation, soil erosion rates, and mass movements, and for the mechanical characterization of weathering profiles for engineering geological purposes. [ABSTRACT FROM AUTHOR]

The published version of this article, unfortunately, contained error. Fig. 8 correction was not carried out. Given in this article is the correct figure. [ABSTRACT FROM AUTHOR]

In this paper we characterized several weathering profiles developed on granitoid rocks in the Sila Massif upland (Calabria, southern Italy), integrating detailed macro- and micromorphological observations with physico-mechanical field tests and petrographic, mineralogical and geochemical analyses. We focused our attention on the main weathering and pedogenetic processes, trying to understand apparent discrepancies between weathering grade classes based on field description and geomechanical properties, and two common weathering indices, such as the micropetrographic index (Ip) and the chemical index of alteration (CIA). Our results showed that sericite on plagioclase and biotite chloritization, that represent inherited features formed during late-stage hydrothermal alteration of granitoid rocks, may cause an overestimation of the real degree of weathering of primary mineral grains under meteoric conditions, especially in lower weathering grade classes. Moreover, the frequent identification of Fe–Mn oxides and clay coatings of illuvial origin (rather than or in addition to those formed in situ), both at the macro- and microscale, may also explain an overestimation of the weathering degree with respect to field-based classifications. Finally, some apparent inconsistencies between field geomechanical responses and chemical weathering were interpreted as related to physical weathering processes (cryoclastism and thermoclastism), that lead to rock breakdown even when chemical weathering is not well developed. Hence, our study showed that particular caution is needed for evaluating weathering grades, because traditional field and geochemical-petrographic tools may be biased by inherited hydrothermal alteration, physical weathering and illuvial processes. On the basis of chronological constraints to soil formation obtained from a 42 ka-old volcanic input (mixed to granite parent materials) detected in the soil cover of the Sila Massif upland, a first attempt to estimate soil formation rates was achieved for different depths of corresponding weathering profile zones. Soil formation rates ranged from 0.01–0.07 mm a − 1 for A and Bw horizons (weathering class VI) to 0.04–0.36 mm a − 1 for the underlying saprolite (C and Cr layers; class V). By comparing these results with the corresponding erosion rates available in the literature for the study area, that range from < 0.01–0.05 to 0.10–0.21 mm a − 1 , we suggest that the upland landscape of the Sila Massif is close to steady-state conditions between weathering and erosive processes. [ABSTRACT FROM AUTHOR]