Search

Regionalization exerts an important guiding role for sound environmental management, regional development, and schemes toward regionalizing ecological function, involving multiple levels. This paper formulated a framework for a detailed regionalization approach using the Ashi River watershed, China, as case study. Human activities, especially agriculture non-point source pollution (ANPS) and social factors, were identified as main factors. The results indicated that (1) the export coefficient model (ECM) can be used to determine ANPS loads in the watershed as well as total nitrogen and total phosphorus loads. (2) The minimum cumulative resistance model (MCR) showed that the middle and lower reaches had high risk for ANPS occurrence. (3) Based on the identified key factors, the watershed was divided into level IV and combined with existing level III using cluster analysis. Corresponding management countermeasures were proposed. This provides a scientific basis for pollution control planning and for management measures.

Potable groundwater has become the primary water source for the local population because of the serious pollution of As and heavy metals in the surface water around the Dongting Lake Plain. A comprehensive research on the shallow groundwater was performed in this study via geographical information system (GIS) and geochemical method to evaluate groundwater quality and health risks of shallow groundwater in Dongting Lake Plain. Eighty-seven samples were collected and the content of As and twelve other heavy metals (e.g., Al, Fe, Zn, Cu, Mo, Ni, Mn, Co, Ba, Pb, Cd, and Cr) in the samples were detected by inductively coupled plasma-mass spectrum (ICP-MS) technology. The water pollution situation was assessed using heavy metal contents and evaluation indices, and human health risks were evaluated on the basis of both carcinogenic and noncarcinogenic aspects. Results showed that the shallow groundwater quality is moderately to heavily contaminated and should be considered in some areas of the Li and Xiangjiang River coasts. Several regions have the potential of carcinogenic risks induced by As and the groundwater in some regions may have the risk of Cr carcinogenesis in the wet season. These findings suggested that the potential harm caused by Fe, Zn, Mn, Cr, and As pollution of groundwater, especially As and Cr in wet season, must be considered. The spatio-temporal study on the groundwater quality evaluation may be beneficial to the protection and sustainable development of groundwater resources in Dongting Lake Plain.Summary: Although the overall noncarcinogenic health risk by metals in shallow groundwater of Dongting Lake is low, noncarcinogenic health risks caused by Fe, Zn, Mn, and As exist in some areas., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020. Published by Elsevier Ltd.)

Palladium (Pd) is extremely expensive due to its scarcity and excellent catalytic performance. Thus, the recovery of Pd has become increasingly important. Herein, microbial extracellular polymeric substances (EPS) and magnetic nanocomposite EPS@Fe 3 O 4 were applied to recover Pd catalysts from Pd(II) wastewater. Results indicated that Pd(II) was reduced to Pd (0), which was then adsorbed by EPS (101.21 mg/g) and EPS@Fe 3 O 4 (126.30 mg/(g EPS)). After adsorbing Pd, EPS@Fe 3 O 4 could be collected by magnetic separation. The recovered Pd showed excellent catalytic activity in the reduction of methylene blue (MB). The pseudo-second-order kinetic model and Redlich-Peterson model best fit the adsorption results. According to spectral analysis, Pd(II) was reduced to Pd (0) by chemical groups in EPS and EPS@Fe 3 O 4 , and the hydroxyl had a chelating effect on adsorbed Pd. Therefore, EPS@Fe 3 O 4 is an efficient adsorbent for recovering Pd from Pd(II) wastewater., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Facing low reactivity/selectivity of oxygen reduction reaction (ORR) in electro-Fenton (EF), N, S atoms were introduced into carbon-based cathode. "End-on" O 2 adsorption was achieved by adjusting electronic nature via N doping, while *OOH binding capability was tuned by spin density variation via S doping. Results showed the optimized N, S co-doped cathode presented a 42.47% improvement of H 2 O 2 accumulation (7.95 ± 0.02 mg L -1 cm -2 ). According to density functional theory (DFT), N, S co-doped structure favored the "end-on" O 2 adsorption as adsorption energy dropped to - 2.24 eV. Moreover, O-O/C-O bond lengths variation proved a possibility for *OOH desorption. The elaborated cathode was used in EF for sulfonamides (SAs) decay. A 100% removal rate of sulfadiazine (SDZ), sulfathiazole (STZ) and sulfadimethoxine (SDM) was achieved within 60 min, among which SDZ tended to be degraded easily. Because the absolute hardness (η) of those pollutants is ranked as follows: η SDM > η STZ > η SDZ . Degradation pathways were proposed based on the detected byproducts, along with toxicity was evaluated by ecological structure-activity relationship (ECOSAR) program. Results showed that toxic intermediates generated were reduced or even disappeared. EF with N, S co-doped cathode provides a promising process for antibiotics wastewater treatment., (Copyright © 2020 Elsevier B.V. All rights reserved.)

The extracellular polymeric substances coating magnetic powders-supported nano zero-valent iron (nZVI@EPS@Fe 3 O 4 ) was synthesized, using reduction and adsorption to treat Sb(V) wastewater. The adsorption performance and mechanism were investigated under aerobic and anaerobic conditions. The adsorption capacity of nZVI@EPS@Fe 3 O 4 (79.56 mg/g at pH = 5) was improved compared to that of the original materials (60.74 mg/g). The spectral analysis shows that both nZVI and EPS@Fe 3 O 4 in nZVI@EPS@Fe 3 O 4 played an important role in reducing Sb(V) to Sb(III) and adsorbing Sb. The reducibility and adsorption capacity of nZVI@EPS@Fe 3 O 4 towards Sb(V) remained strong under aerobic condition (62% Sb(III), 79.56 mg/g), although they were slightly weaker than those under anaerobic condition (74% Sb(III), 91.78 mg/g). nZVI@EPS@Fe 3 O 4 showed good performance in regeneration experiments. nZVI@EPS@Fe 3 O 4 is promising as a cost-effective and highly efficient material for Sb(V)-contaminated water. This study is meaningful in understanding the redox behaviour of nZVI composites in aerobic and anaerobic conditions., (Copyright © 2020 Elsevier Inc. All rights reserved.)

To effectively improve the heavy metal removal efficiency and stability of biomass adsorbents, a novel biochar colloids-mycelial pellets (BC-MP) composite was prepared via a biological assembly method. BC-MP was successfully produced with increased surface area and multisorption sites by physical adsorption, electrostatic interaction and hydrogen-bond formation between BC and extracellular polymers on MP. To investigate the performance and mechanisms of heavy metal adsorption by BC-MP, batch experiments were conducted with cadmium (Cd (II)) as the model pollutant. Results showed that BC-MP had higher removal efficiency (57.66%) compared to BC (5.45%) and MP (38.45%), respectively, due to the synergistic effect. The maximum adsorption capacity of Cd (II) on BC-MP was 102.04 mg/g based on Langmuir isotherm model. Adsorption kinetics analysis indicated that chemical sorption was the key factor controlling the adsorption of Cd (II) onto BC-MP. Multiple characterization tests revealed that the main mechanisms of the adsorption process were surface complexation, cation exchange and precipitation. The BC-MP composite showed excellent heavy metal removal efficiency with long-term adsorption stability, suggesting its potential as a promising biosorbent for heavy metal removal from industrial wastewater., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

A self-immobilization method for microorganisms was developed based on fungal pellets. Generally, pellets have some problems such as cell leakage, cell loading limitation and low mechanical strength. Therefore, biochar was applied to overcome these disadvantages. Atrazine degradable microorganism Arthrobacter sp. ZXY-2 was immobilized by Aspergillus niger Y3 pellets. After adding biochar with optimal dosage (0.006 g biochar for 0.3 g pellets with ZXY-2), the self-immobilized biomixture (SIB) removed 50 mg /L atrazine rapidly within 1 h, which was 61% higher compared to pellets without biochar. The kinetic adsorption results showed that the biosorption of biochar by pellets followed a pseudo-second-order kinetic model. The ATZ removal ability and reusability of SIB were significantly increased by biochar. The results showed that the addition of biochar could enhance the connection between ZXY-2 and pellets based carrier, and the favorable biodegradation pH of ZXY-2 changed to 6 and 10. Several analyses such as ζ-potential measurements, FTIR, XPS, SEM-EDS, and elemental analyses were performed to evaluate the mechanism of action of SIB. To enhance the ATZ degradation by single strain, Agrobacterium, sp WL-1 was isolated and added. The metabolic pathways and their function complementation were studied. Furthermore, a biomass integration model for wastewater treatment was proposed herein., (Copyright © 2019 Elsevier B.V. All rights reserved.)

It is still unclear about the superiority of the nanoscale Fe 3 O 4 -assisted extracellular polymeric substances (EPS) compared to traditional EPS and its application feasibility in sulfonamide-contaminated aqueous system. This study reported eco-friendly and reusable EPS/Fe 3 O 4 was applied in the sulfonamide-contaminated water treatment, including sulfamethoxazole (SMX), sulfamerazine (SM1), sulfamethazine (SM2) and sulfadiazine (SDZ), respectively. EPS/Fe 3 O 4 exhibited the adsorption performance of 77.93%, 74.13%, 65.62%, and 56.64% for SMX, SM1, SM2 and SDZ, respectively, increased by 7.93%, 19.02%, 13.78% and 9.93% compared to traditional EPS. The initial pH value tuned adsorption performance via varying existing species of each sulfonamides. The adsorption process could be well fitted by Freundlich and pseudo-second-order kinetics models. Moreover, the multiple evidences from SEM, FTIR, zeta potential and XRD explained the adsorption mechanisms (i.e., chemisorption, ion exchange, hydroxyl group and hydrophobicity). Desorption and recycle adsorption experiments demonstrated the well regeneration ability of EPS/Fe 3 O 4 as biosorbent (67.12% adsorption performance for SMX after five adsorption-desorption cycles), suggesting EPS/Fe 3 O 4 was considered as a superior choice for sulfonamide-contaminated water treatment compared to the unrecyclable EPS.

One of the bottlenecks often encountered in electro-Fenton technology is its low ability to produce hydrogen peroxide (H 2 O 2 ). Thus, the hunt of suitable electrodes and reactor are a must to be tackled in order to improve the efficiency of the system. In this study, three-dimensional nickel foam was selected as cathode for in situ generating H 2 O 2 efficiently and graphite was the control group in an enhanced oxygen mass transfer reactor. The micro-structure and electrochemical performance of electrodes were tested by scanning electron microscopy (SEM), X-ray diffraction (XRD), cyclic voltammetry (CV), electro-chemical impedance spectroscopy (EIS) and Tafel polarization techniques, respectively. The concentration of H 2 O 2 produced by nickel foam cathode was 780.63 μmol/L and the removal efficiency of rhodamine B (RhB) was reached to 92.5% in 60 min. SEM and Tafel results showed that both nickel foam and graphite electrodes were porous structure cathodes. Moreover, CV and EIS experimental results indicated nickel foam electrode was controlled by charge transfer process while had a better transfer than graphite electrode. Electron spin resonance (ESR) spectra results demonstrated that the main oxidant species involved was ·OH, accounting for RhB degradation in electro-Fenton progress. Therefore, in terms of pollutant degradation in the electro-Fenton process, nickel foam electrode together with novel reactor was a promising technique.

The microorganism Arthrobacter. ZXY-2 exhibits excellent degradation efficiency for atrazine in free cells. However, its poor fixability makes it hard to be kept and recycled in water. To conquer the problem, this work employed mycelial pellets of Aspergillus niger Y3 to immobilize ZXY-2, which formed a self-immobilized biomixture (SIB) to remove atrazine. SIB could completely degrade 57.3 mg/L atrazine within 10 h. The SIB exhibited the highest degradation efficiency at pH = 7 and 40 °C. Degradation of atrazine with initial concentrations of 57.3 mg/L and 17.5 mg/L was described well by zero and first-order reaction kinetics, respectively. The recycling experiments demonstrated that SIB could be recycled for 5 batches. The results of SEM, FT-IR, and zeta potential analysis showed that porous structure, functional groups, and electronegativity of SIB all contributed to its stable formation. Therefore, this study demonstrates that SIB could be formed stably and could remove atrazine efficiently., (Copyright © 2019 Elsevier B.V. All rights reserved.)

The first application of a novel electro-Fenton (EF) for coking wastewater (CW) treatment at the original pH (6.80) by using tripolyphosphate (TPP) ligand was proposed. Total organic carbon (TOC) decay of CW followed a pseudo-first kinetic rate constant with an apparent rate constant (k app ) of 1.07 × 10 -2  min -1 for the EF in the presence of TPP (EF/TPP), which was 2.10 times higher than that of conventional EF (k app  = 5.10 × 10 -3  min -1 ) working at pH 3. The high efficiency of EF/TPP at neutral pH was mainly attributed to the newly formed Fe-O-P coordination in the iron-ligand compound (Fe 2+ -TPP) supported by UV-absorption spectra results, activating oxygen to produce • OH and hence enhancing the oxidation capacity. Key operating parameters of CW mineralization by EF/TPP including Fe 2+ concentration and pH value were systematically investigated. Excitation-emission matrix (EEM) spectra technique was used to assess the variance of dissolved organic matters during the EF/TPP process. Results showed an 81% mineralization of CW after 3 h electrolysis coupled with a low energy consumption (0.129 kWh g -1 TOC) which were obtained by the EF/TPP process. Microtox toxicity demonstrated that TPP could reduce the toxicity of raw CW and importantly, it showed that EF/TPP was effective for detoxification. Mechanism study via simulated matrix with similar components as CW revealed that • OH produced both from Fenton and Fe 2+ -TPP activation together with the generated active chlorine was responsible for CW mineralization. In summary, the TPP-assisted EF process was presented as a promising technique for extending coking wastewater treatment at near-neutral pH with a high mineralization.

The superiority of the nanoscale zero valent iron (nZVI) assisted biochar (BC) composites compared to traditional nZVI and its application feasibility are still unclear. This study aimed to provide valuable information for practical application. Firstly, the Fe/BC mass ratio of 2:1 during the preparation of nZVI-BC was proved obtaining the complete Cr 6+ removal. Then, results revealed that the initial pH value tuned Cr 6+ removal performance via varying existing Cr 6+ species, surface charge, and chemical states of iron nanoparticles (NPs). Improvement of colloidal stabilization and positive surface charge attributed to enhancement of Cr 6+ removal of nZVI-BC. The Cr 6+ removal process was well described using pseudo-second-order kinetic. By Langmuir isotherm model, the maximum removal capacity (58.82 mg g -1 ) was determined. Moreover, the multiple evidences (XRD, XPS, FTIR, and TEM results) explained the mechanisms of Cr 6+ removal (i.e. electrostatic force, complexes, metal reduction, and precipitates on the edges). Little inhibitory effect of coexisting anions (SO 4 2- , PO 4 3- , and NO 3 - ) and well regeneration ability (82.2% removal efficiency after five cycles using acid washing), along with well Cr 6+ removal efficiencies of real contaminated water (electroplating wastewater, tannery wastewater and groundwater) treatment, suggested nZVI-BC was considered as a superior and cost-effective choice for Cr 6+ included polluted water treatment., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

The magnetic nano-scale biosorbent (Fe 3 O 4 /MFX) was synthesized by the chelation and cross-linking procedure with extracellular polymeric substances (MFX) and Fe 3 O 4 . Fe 3 O 4 /MFX possessed the porous structure and numerous functional groups (i.e., amino, carboxyl, and hydroxyl), and its core region had a typical size of ∼11nm. The maximum adsorption capacity was 56.04mgg -1 at pH 6.0, 10mgL -1 of tetracycline, and 160mgL -1 of Fe 3 O 4 /MFX. The data is properly fitted by the Langmuir, Freundlich, and pseudo-second-order kinetics models. As elucidated by the model parameters and FTIR analysis, chemical ion exchange and COOH could mainly contribute to the adsorption. Meanwhile, the desorption and regeneration experiments implied the adsorption efficiency decreased by only 3.37-8.37% after five adsorption-desorption cycles, and the detection of iron leaching by ICP-OES showed a fine stability of Fe 3 O 4 /MFX. Therefore, this technically facile, easily recyclable, and environmentally friendly biosorbent has potential for practical applications in antibiotic removal., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Phosphorus has been recognized as a leading pollutant for surface water quality deterioration. In the Midwestern USA, subsurface drainage not only provides a pathway for excess water to leave the field but it also drains out nutrients like nitrogen (N) and phosphorus (P). Fly ash has been identified as one of the viable materials for phosphorus removal from contaminated waters. In this study, a ceramic pellet was manufactured using fly ash for P absorption. Three types of pellet with varying lime and clay proportions by weight (type 1: 10% lime + 30% clay, type 2: 20% lime + 20% clay, and type 3: 30% lime + 10% clay) were characterized and evaluated for absorption efficiency. The result showed that type 3 pellet (60% fly ash with 30% lime and 10% clay) had the highest porosity (14%) and absorption efficiency and saturated absorption capacity (1.98 mg P/g pellet) compared to type 1 and 2 pellets. The heavy metal leaching was the least (30 μg/L of chromium after 5 h) for type 3 pellet compared to other two. The microcosmic structure of pellet from scanning electron microscope showed the type 3 pellet had the better distribution of aluminum and iron oxide on the surface compared other two pellets. This result indicates that addition of lime and clay can improve P absorption capacity of fly ash while reducing the potential to reduce chromium leaching., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

The extracellular polymeric substrate (EPS) extracted from Klebsiella sp. J1 was used to adsorb low concentrations of tetracycline, and the efficiency and mechanism of tetracycline adsorption by EPS from strain J1 were studied. Adsorption efficiency was evaluated at different conditions. Results showed that optimal adsorption efficiency was 71.68 % with 60 mg L -1 of EPS from strain J1 and 90 μL of 10 % (w/v) CaCl 2 in 100 mL of tetracycline solution (80 μg L -1 ) with pH of 8.0. Experimental data was fitted well with Langmuir, Freundlich isotherm, and pseudo-second-order models. Analyses of E value, Ea value, thermodynamics, zeta potential variation, and Fourier transform infrared spectroscopy (FTIR) spectra proved that chemisorption was the main adsorption type and bridging was the main adsorption mechanism. Thermodynamic analysis indicated that adsorptive reaction was exothermic from 20 to 40 °C. In addition, humic acid (HA) showed little effect on the tetracycline adsorption by MFX.

Nitrogen (N) runoff from paddy fields serves as one of the main sources of water pollution. Our aim was to reduce N runoff from paddy fields by fertilizer management and inoculation with arbuscular mycorrhizal fungi (AMF). In northeast China, Shuangcheng city in Heilongjiang province, a field experiment was conducted, using rice provided with 0%, 20%, 40%, 60%, 80%, and 100% of the local norm of fertilization (including N, phosphorus and potassium), with or without inoculation with Glomus mosseae. The volume, concentrations of total N (TN), dissolved N (DN) and particulate N (PN) of runoff water were measured. We found that the local norm of fertilization led to 18.9kg/ha of N runoff during rice growing season, with DN accounting for 60%-70%. We also found that reduction in fertilization by 20% cut down TN runoff by 8.2% while AMF inoculation decreased N runoff at each fertilizer level and this effect was inhibited by high fertilization. The combination of inoculation with AMF and 80% of the local norm of fertilization was observed to reduce N runoff by 27.2%. Conclusively, we suggested that the contribution of AMF inoculation combined with decreasing fertilization should get more attention to slow down water eutrophication by reducing N runoff from paddy fields., (Copyright © 2016. Published by Elsevier B.V.)

A novel bioflocculant CBF with high flocculating activity, produced by mixed culture of Rhizobium radiobacter F2 and Bacillus sphaericus F6 from soil, was investigated with regard to its production and flocculation performance in Al(III) removal. The most preferred carbon source, nitrogen source and C/N ratio (w/w) for strains F2 and F6 to produce CBF were glucose, urea and 20, respectively. The optimal inoculum size for CBF production was 10 % (v/v). The optimal initial pH, culture temperature and shaking speed were 7-8, 30°C and 140 r/min for 24 h, respectively, under which the flocculating activity of the bioflocculant reached 98.52 %. According to literature review, flocculant dosage, coagulant aid dosage, pH, hydraulic condition of coagulation and sedimentation time are considered as influencing parameters for CBF flocculation performance in Al(III) removal by L16(4(5)) orthogonal design. The optimal conditions for Al(III) removal obtained through analysis and verification experiments were as follows: CBF, 28 mg/L; coagulant aid, 1.5 mL/L; initial pH, 8.0; and hydraulic conditions of coagulation: stir speed, 160 r/min; stir time, 40 s; and sedimentation time, 30 min. Under the optimal conditions, the removal efficiency of Al(III) was 92.95 %. Overall, these findings indicate that bioflocculant CBF offers an effective alternative method of decreasing Al(III) during drinking water treatment.

In this work, pyridinium-functionalized silica nanoparticles adsorbent (PC/SiO2/Fe3O4) was synthesized for phosphate removal from aqueous solutions. The removal efficiency of phosphate on the PC/SiO2/Fe3O4 was carried out and investigated under various conditions such as pH, contact temperature and initial concentration. The results showed that the adsorption equilibrium could be reached within 10 min, which fitted a Langmuir isotherm model, with maximum adsorption capacity of 94.16 mg/g, and the kinetic data were fitted well by pseudo-second-order and intra-particle diffusion models. Phosphate loaded on the adsorbents could be easily desorbed with 0.2 mol/L of NaOH, and the adsorbents showed good reusability. The adsorption capacity was still around 50 mg/g after 10 times of reuse. All the results demonstrated that this pyridinium-functionalized mesoporous material could be used for the phosphate removal from aqueous solution and it was easy to collect due to its magnetic properties.

The toxicity of municipal wastewater to the receiving water bodies is still unknown, due to the lack of regulated toxicity based index for wastewater discharge in China. Our study aims at gaining insight into the acute toxic effects of local municipal wastewater on alga, Scenedesmus obliquus. Four endpoints, i.e. cell density, chlorophyll-A concentration, superoxide dismutase (SOD) activity and cell membrane integrity, of alga were analyzed to characterize the acute toxicity effects of wastewater from municipal wastewater treatment plants (WWTPs) with different treatment techniques: sequencing batch reactor (SBR), Linpor and conventional activated sludge. Influent and effluent from each treatment stage in these three WWTPs were sampled and evaluated for their acute toxicity. Our results showed that all three techniques can completely affect the algal chlorophyll-A synthesis stimulation effects of influent; the algal cell growth stimulation effect was only completely removed by the secondary treatment process in conventional activated sludge technique; toxic effects on cell membrane integrity of two influents from WWTPs with SBR and conventional activated sludge techniques were completely removed; the acute toxicity on SOD activity was partially reduced in SBR and conventional activated sludge techniques while not significantly reduced by Linpor system. As to the disinfection unit, NaClO disinfection enhanced wastewater toxicity dramatically while UV radiation had no remarkable influence on wastewater toxicity. Our results illustrated that SOD activity and chlorophyll-A synthesis were relatively sensitive to municipal wastewater toxicity. Our results would aid to understand the acute toxicity of municipal wastewater, as well as the toxicity removal by currently utilized treatment techniques in China., (Copyright © 2015 Elsevier Inc. All rights reserved.)

Acinetobacter sp. SZ28 exhibited efficient autotrophic denitrification ability using Mn(2+) as an electron donor. Sequence amplification identified the presence of the nirS gene. Meteorological chromatography analysis showed that N2 was produced as an end product. Response surface methodology experiments showed that the maximum removal of nitrate occurred under the following conditions: Mn(2+) concentration of 143.56 mg/L, C/N ratio of 6.82, initial pH of 5.17, and temperature of 34.26 °C, where the initial Mn(2+) concentration produced the largest effect. In the groundwater experiment, nitrate levels decreased from 1.63 mg/L to 0 mg/L. Three-dimensional fluorescence analysis showed a decrease in the peak intensity of the original humus. Humus and the small-molecule amino acid tryptophan were detected. These results demonstrated that strain SZ28 is a suitable candidate for the simultaneous removal of nitrogen and Mn(2+) in groundwater treatment., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

In this study, zeolite-biological aerated filters (Z-BAFs) bioaugmented by free and magnetically immobilized cells of Arthrobacter sp. W1 were designed to treat coking wastewater containing high concentrations of phenol and naphthalene along with carbazole (CA), dibenzofuran (DBF), and dibenzothiophene (DBT). All treatments were carried out for a period of 100days and the data indicated that bioaugmented Z-BAFs with magnetically immobilized cells was most efficient for treating coking wastewaters. Illumina high-throughput sequencing was used to reveal the microbial community structures of Z-BAFs. Both bioaugmentation treatments could accelerate the shift of the bacterial community structures. The introduced strain W1 remained dominant in the bioaugmented Z-BAFs with magnetically immobilized cells, indicating both strain W1 and the indigenous degrading bacteria played the most significant role in the treatment. Overall, bioaugmented Z-BAF with magnetically immobilized cells can be used to efficiently degrade phenol, naphthalene, CA, DBF, and DBT in coking wastewater., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

This work focused on wastewater reclamation of secondary treated ethylene chemical plant effluent, which contained high conductivity and high organic concentration. To reduce the cost and improve operation stability, a biological aerated filter-ultrafiltration-reverse osmosis (BAF-UF-RO) process was proposed. The feasibility and effectiveness of BAF loaded with a novel non-sintered fly-ash ceramsite (NSFC) as a pretreatment method of a dual membrane system were investigated in detail. The results showed that the CODCr, turbidity, NH3-N and the silt density index (SDI) in the effluent from the BAF were reduced to 24.2 mg/L, 12.17 NTU, 0.42 mg/L and 7.52, respectively, and most of the organic compounds were biodegraded. The BAF-UF-RO process was stable with a recovery rate of 75%, and the desalination rate was up to about 97.5%. Compared with the UF-RO process, the operating pressure and backwash frequency decreased from 1.12-1.26 Mpa and 3 times/d to 0.94-0.98 Mpa and 2 times/d, respectively. After continuous operation for four months, there appeared to be no need for chemical cleaning of the RO membrane. Moreover, the analysis results of X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy proved that there was only slight membrane fouling, which was mainly colloidal blocking caused by refractory organic compound.

Our study sought to assess how much phosphorus (P) runoff from paddy fields could be cut down by fertilizer management and inoculation with arbuscular mycorrhizal fungi. A field experiment was conducted in Lalin River basin, in the northeast China: six nitrogen-phosphorus-potassium fertilizer levels were provided (0, 20%, 40%, 60%, 80%, and 100% of the recommended fertilizer supply), with or without inoculation with Glomus mosseae. The volume and concentrations of particle P (PP) and dissolved P (DP) were measured for each runoff during the rice growing season. It was found that the seasonal P runoff, including DP and PP, under the local fertilization was 3.7 kg/ha, with PP, rather than DP, being the main form of P in runoff water. Additionally, the seasonal P runoff dropped only by 8.9% when fertilization decreased by 20%; rice yields decreased with declining fertilization. We also found that inoculation increased rice yields and decreased P runoff at each fertilizer level and these effects were lower under higher fertilization. Conclusively, while rice yields were guaranteed arbuscular mycorrhizal inoculation and fertilizer management would play a key role in reducing P runoff from paddy fields., (Copyright © 2015. Published by Elsevier B.V.)

A newly aerobic denitrifying bacterial strain, Pseudomonas sp. X31, which was isolated from activated sludge, was added to a newly developed aerobic denitrification bio-ceramsite reactor as an inoculum to treat nitrate-polluted water and the denitrification activities of this system under different air-water ratio, hydraulic loading, and C/N (carbon/nitrogen ratio) conditions were investigated. It demonstrated excellent capability for denitrification in the bio-ceramsite reactor at air-water ratios that varied from 6.5:1 to 8:1. The optimal hydraulic loading for the bio-ceramsite reactor was 0.75 m/h with the optimum denitrification efficiency of 95.18%. The optimal C/N was 4.5:1 with a maximum nitrate removal efficiency of 98.48%. COD could be completely removed under the most appropriate condition (air-water ratio 6.5:1-8:1, hydraulic loading 0.75 m/h, and C/N 4.5:1). The quantity of the biomass in the reactor decreased along with flow, which was in accordance with the variety of the available substrate concentrations in the water. However, the biofilm activity was not proportional to the biomass in the bio-ceramsite reactor, but increased with the quantity of the biomass up to a peak value and then decreased.

The research progress on the selective and sensitive fluorescent detection of nitrite anions has greatly relied on the development of new fluorescent materials. Herein, a novel nanohybrid exhibiting dual emissions in blue and red wavelength ranges is fabricated for the rapid, on-site, and sensitive detection of nitrite anions. Such a nanohybrid system consists of graphene oxide (GO-C6NH2) and gold nanoclusters (HSA-Au NCs), which have been hybridized by electrostatic attraction and hydrogen bonding interaction. The nanohybrid has been completely characterized with respect to its fluorescence properties, photostability, and morphology. It has been found that red fluorescence of gold nanoclusters selectively responds to nitrite, whereas the blue fluorescence of graphene oxide remains constant, resulting in a distinct fluorescence color evolution from red to blue. Therefore, we apply the nanohybrid for the detection of nitrite anions by a fluorescence ratiometric method and estimate a detection limit of 46 nM, lower than the allowable level (∼21 μM) in drinking water set by U.S. Environmental Protection Agency. The method has been further validated by applying it for the determination of nitrite anions in real samples, including tap water, lake water, and cured meat.

A novel indigenous bacterium, strain JM10, isolated from the oligotrophic Hei He reservoir was characterized and showed aerobic denitrification ability. JM10 was identified as Bacillus sp. by phylogenetic analysis of its 16S rRNA gene sequence. Strain JM10 displayed very high levels of activity in aerobic conditions, consuming over 94.3% NO3(-)-N (approximately 3.06 mg L(-1)) with a maximum reduction rate of 0.108 mg NO3(-)-N L(-1) h(-1). Full-factorial Box-Behnken design and response surface methodology were employed to investigate the optimal nitrate degradation conditions. The optimum conditions for nitrate degradation, at a rate of 0.140 mg L(-1) h(-1), were found to be an inoculum size of 16.3% v/v, initial pH of 7.6, C/N ratio of 7.4, and temperature of 27.4 °C, and the C/N ratio and temperature had the largest effect on the nitrate degradation rate. Strain JM10 was added into the water samples from Hei He reservoir and the total nitrogen and nitrate removal rates of the strain reached 66.5% and 100%, respectively. Therefore, our results demonstrate that the strain JM10 favored the bioremediation of the oligotrophic reservoir.

The performance and flocs properties in removing soluble cadmium of the dual flocculant APAM-MFX (anionic polyacrylamide APAM used in combination with extracellular polymeric substrates extracted from Klebsiella sp. J1 MFX) were studied compared with the performance of using bioflocculant alone. In addition, adsorption isotherms and kinetic process for Cd(II) adsorption onto APAM-MFX were investigated. APAM-MFX synergistically improved the Cd(II) removal percentage by 82.68%. Characteristic flocs formed by APAM-MFX indicated the synergetic effects resulted from additional bridging bonds between APAM and MFX. Adsorption process was best described by the Freundlich isotherm and pseudo-second order kinetic model. The mean free energy E (8.39-8.57kJmol(-1)) and activation energy Ea (45.09kJmol(-1)) were determined. Based on the results, the main mechanism of Cd(II) removal by APAM-MFX could be chemical ion exchange, and the liquid-film diffusion step was the rate-limiting step., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

In this study, the cometabolic degradation of carbazole (CA), dibenzofuran (DBF), and dibenzothiophene (DBT) by immobilized Arthrobacter sp. W1 cells pregrown with naphthalene was investigated. Four kinds of polymers were evaluated as immobilization supports for strain W1. After comparison with agar, alginate, and κ-carrageenan, gellan gum was selected as the optimal immobilization support. Furthermore, magnetic Fe₃O₄ nanoparticle was selected as most suitable nanoparticle for immobilization and the optimal concentration was 80 mg/L. The relationship between specific degradation rate and the initial concentration of CA, DBF and DBT was described well by Michaelis-Menten kinetics. The recycling experiments demonstrated that the magnetically immobilized cells coupling with activation zeolite showed highly bioremediation activity on the coking wastewater containing high concentration of phenol, naphthalene, CA, DBF and DBT during seven recycles. Toxicity assessment indicated the treatment of the coking wastewater by magnetically immobilized cells with activation zeolite led to less toxicity than untreated wastewater., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

A naphthalene-utilizing bacterium, Arthrobacter sp. W1, was used to investigate the cometabolic degradation of carbazole (CA), dibenzofuran (DBF) and dibenzothiophene (DBT) using naphthalene as the primary substrate. Both the growing and washed cells of strain W1 could degrade CA, DBF, DBT, and naphthalene simultaneously and quickly. Inhibition kinetics confirmed that the presence of CA, DBF and DBT in the growing system would inhibit the cells growth and biodegradability of strain W1. The relationship between ln(C/C0) and time, and specific degradation rate and CA, DBF and DBT concentration could be described well by First-order and Michaelis-Menten kinetics. The treatment of real coking wastewater containing high concentration of phenol, naphthalene, CA, DBF, DBT and NH3-N was shown to be highly efficient by naphthalene-grown W1 coupling with activation zeolite. Toxicity assessment indicated the treatment of the coking wastewater by strain W1 coupling with activation led to less toxicity than untreated wastewater., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

Rice husk, a surplus agricultural byproduct, was applied to the sorption of copper from aqueous solutions. Chemical modifications by treating rice husk with H3PO4 increased the sorption ability of rice husk for Cu(II). This work investigated the sorption characteristics for Cu(II) and examined the optimum conditions of the sorption processes. The elemental compositions of native rice husk and H3PO4-treated rice husk were determined by X-ray fluorescence (XRF) analysis. The scanning electron microscopic (SEM) analysis was carried out for structural and morphological characteristics of H3PO4-treated rice husk. The surface functional groups (i.e., carbonyl, carboxyl, and hydroxyl) of adsorbent were examined by Fourier Transform Infrared Technique (FT-IR) and contributed to the adsorption for Cu(II). Adsorption isotherm experiments were carried out at room temperature and the data obtained from batch studies fitted well with the Langmuir and Freundlich models with R (2) of 0.999 and 0.9303, respectively. The maximum sorption amount was 17.0358 mg/g at a dosage of 2 g/L after 180 min. The results showed that optimum pH was attained at pH 4.0. The equilibrium data was well represented by the pseudo-second-order kinetics. The percentage removal for Cu(II) approached equilibrium at 180 min with 88.9% removal.

In this study, adsorption of zinc onto the adsorbent (untreated rice husk and NaOH-treated rice husk) was examined. During the removal process, batch technique was used, and the effects of pH and contact time were investigated. Langmuir isotherm was applied in order to determine the efficiency of NaOH-treated rice husk used as an adsorbent. The zinc adsorption was fast, and equilibrium was attained within 30 min. The maximum removal ratios of zinc for untreated rice husk and NaOH-treated rice husk after 1.5 h were 52.3% and 95.2%, respectively, with initial zinc concentration of 25 mg/L and optimum pH of 4.0. Data obtained from batch adsorption experiments fitted well with the Langmuir isotherm model. Maximum adsorption capacity of zinc onto untreated rice husk and NaOH-treated rice husk was 12.41 mg/g, and 20.08 mg/g respectively, at adsorbent dosage of 1 g/L at 25°C. The nature of functional groups (i.e., amino, carboxyl, and hydroxyl) and metal ion interactions was examined by the FT-IR technique. It was concluded that the NaOH-treated rice husk had stronger adsorption capacity for Zn(2+) compared with the untreated rice husk. The NaOH-treated rice husk is an inexpensive and environmentally friendly adsorbent for Zn(2+) removal from aqueous solutions.

A denitrifying phosphate-accumulating organisms (DNPAOs), which was called Q-hrb05, was isolated in the special medium from the anaerobic/aerobic/anoxic SBR reactor. Strain Q-hrb05 was identified by 16SrDNA gene analysis, and the accession number of 16SrDNA gene sequence of strain Q-hrb05 in GenBank was GU214826. Effects of the different pH values, temperature, carbon source of medium on nitrogen and phosphorus removal of strain Q-hrb05 were investigated. The result showed that strain Q-hrb05 belonged to Bacillus sp.. Meanwhile, extracellular exopolymers of strain Q-hrb05 was based on protein, about 120.6 mg x mL(-1), and it had 23.05 microg x mL(-1) nucleic acid, but little polysaccharide. There was no significant adsorption of phosphate. So phosphorus removal was mainly due to intracellular uptake. And when pH value was kept as 7, temperature was kept as 30 degrees C, and carbon source was kept sodium acetate, the highest nitrogen and phosphorus removal efficiency was achieved. Phosphorus uptake rate was averaged at 88%, and the denitrification rate reached 81%.

A combined biological (augmented membrane bioreactor (MBR)) and photochemical (photocatalysis and ozonation) treatment has been proposed for bromoamine acid (BAA) removal in dyeing wastewater. It was demonstrated that the color and chemical oxygen demand removal in the sequential augmented MBR was about 90% and 50%, respectively. By ribosomal intergenic spacer analysis, it was found that the introduced strain QYY was maintained as the predominant species and the diversity of the system was relatively low throughout the operation. Photocatalysis and ozonation processes were efficient to treat the effluents from MBR with high color and total organic carbon removal more than 90% within 120 min. Therefore, the hybrid treatment system is a possible way to achieve the complete mineralization of BAA.

Two types of chitosan-coated cotton fibers (SCCH and RCCH) were applied to remove and recover Hg(II) ions in aqueous solution. The adsorption kinetics and isotherms of the two fibers for Hg(II) were investigated at different temperatures. The results revealed that the adsorption kinetic processes of SCCH and RCCH fibers for Hg(II) followed the pseudo second-order model at lower temperatures and the pseudo first-order model at higher temperatures. Both the Langmuir and Freundlich models well described the adsorption isotherms of SCCH and RCCH fibers for Hg(II) in the temperature range studied. SCCH and RCCH fibers selectively adsorbed Hg(II) from binary ion systems in the presence of Pb(II), Cu(II), Ni(II), Cd(II), Zn(II), Co(II), Mn(II) and Ag(I). Increased temperature was beneficial to adsorption. The recovery of Hg(II) from aqueous solutions was also studied as a function of sample flow rate and volume, concentration and volume of eluent, elution rate, quantity of adsorbents added and concomitant ions. The results showed that the two fibers efficiently enriched and recovered Hg(II) in the presence of alkali and alkaline earth metals and some heavy metals under optimum conditions. The RCCH fiber exhibited better stability than the SCCH fiber following repeated use.

In this study, decolorization of Reactive Brilliant Red X-3B wastewater by the biological process coping with high salinity and metal ions conditions was investigated, and 16S rDNA based fingerprint technique was used to investigate microbial population dynamics. Results of sequencing batch tests showed that the microbial community could keep efficient with high concentration of dye (1100 mg L(-1)), salt (150 g L(-1) NaCl) and some metal ions such as Mg(2+), Ca(2+) (1-10 mmol L(-1)) and Pb(2+) (1 mmol L(-1)). 16S rDNA-based molecular analysis techniques demonstrated that the microbial community shifted during the acclimatization process affected by salt or metal ions. Some stains similar to Bacillus, Sedimentibacter, Pseudomonas, Clostridiales, Streptomyces and some uncultured clones acted for the dynamic succession, supposed as potential decolorization bacteria. This study provided insights on the decolorization capability and the population dynamic shifts during decolorization process of azo dye wastewater coping with salt and metal ions.

In this paper, bioaugmentation was applied to upgrade a full-scale activated sludge system (S2) into a contact oxidation system (S1). Results showed that when chemical oxygen demand (COD) and ammonia nitrogen (NH(4)(+)-N) concentration of the petrochemical wastewater were 320-530 mg/L and 8-25mg/L, respectively, the bioaugmented process (S1) took only 20 days when they were below 80 mg/L and 10mg/L, respectively. However, the unbioaugmented conventional activated sludge process (S2) spent 30 days to reach the similar effluent quality. As the organic loading rate (OLR) increased from 0.6 to 0.9 and finally up to 1.10 kg COD/m(3)d, S1 showed strong resistance to shock loadings and restored after three days compared to the seven days required by S2. Based on the results of this paper, it shows that bioaugementation application is feasible and efficient for the process upgrade due to the availability of the bioaugmented specialized consortia.

Biological treatment of nitrate wastewater with aerobic denitrifiers in a bio-ceramic reactor was investigated. And denaturing gradient gel electrophoresis (DGGE) method was used for analyzing the stability of microbial community structure. At the condition of the influent with hydraulic loading 0.75 m/h, gas/water ratio 5:1-10:1, temperature 15-23 degrees C, COD loading rate 1.92-5.98 kg/(m3 x d) and NO3- -N loading rate 0.60-1.34 kg/(m3 x d), high nitrate nitrogen removal of almost 100% and the maximum total nitrogen removal of up to 95.73% were achieved during stable operation stage. In addition, the nitrite concentration of effluent was lower. The PCR-DGGE profiles showed that shift of microbial diversity corresponded to the effect of nitrate removal and the preponderant populations for aerobic denitrification were steady during the test period.

The performance and feasibility of immobilization biological activated carbon (IBAC) were investigated to treat micro-pollutant water containing nitrobenzene. IBAC has been developed on the granular activated carbon by immobilization of selected and acclimated species of engineering bacteria to treat the micro-pollutant water containing nitrobenzene. The IBAC removal efficiencies for nitrobenzene, permanganate index, turbidity, UV, ammonia and nitrite were compared with granular activated carbon (GAC) process. Biological toxicity of influent and effluent of filter were determined. Amount of bacteria in carbon was measured when carbon filter was inoculated and circulated stably. The results showed that compared with GAC, it took short time for IABC to startup and recover to normal after impact burden. In addition, IBAC was more effective to treat micro-pollutants. In order to ensure security of drinking water, the influent nitrobenzene should be controlled below 26 microg/L. Effluent biological toxicity treated with IBAC was less than that with GAC. The performance of IBAC was much better than that of GAC. Amount of bacteria in both activated carbon filter increased first and then declined from inlet to outlet.

Chinese traditional medicine wastewater, rich in macromolecule and easy to foam in aerobic biodegradation such as Glycosides, was treated by two identical bench-scale aerobic submerged membrane bioreactors (SMBRs) operated in parallel under the same feed, equipped with the same electronic control backwashing device. One was used as the control SMBR (CSMBR) while the other was dosed with powdered activated carbon (PAC) (PAC-amended SMBR, PSMBR). The backwashing interval was 5 min. One suction period was about 90 min by adjusting preestablished backwashing vacuum and pump frequency. The average flux of CSMBR during a steady periodic state of 24 d (576 h) was 5.87 L/h with average hydraulic residence time (HRT) of 5.97 h and that of PSMBR during a steady periodic state of 30 d (720 h) was 5.85 L/h with average HRT of 5.99 h. The average total chemical oxygen demand (COD) removal efficiency of CSMBR was 89.29% with average organic loading rate (OLR) at 4.16 kg COD/(m3 x d) while that of PSMBR was 89.79% with average OLR at 5.50 kg COD/(m3 x d). COD concentration in the effluent of both SMBRs achieved the second level of the general wastewater effluent standard GB8978-1996 for the raw medicine material industry (300 mg/L). Hence, SMBR with electronic control backwashing was a viable process for medium- strength Chinese traditional medicine wastewater treatment. Moreover, the increasing rates of preestablished backwashing vacuum, pump frequency, and vacuum and flux loss caused by mixed liquor in PSMBR all lagged compared to those in CSMBR; thus the actual operating time of the PSMBR system without membrane cleaning was extended by up to 1.25 times in contrast with the CSMBR system, and the average total COD removal efficiency of PSMBR was enhanced with higher average OLR.