Search

Double-crested cormorants are piscivorous birds that breed in variably contaminated colonies across the Laurentian Great Lakes of North America. Collection and preparation of environmentally relevant extracts from eggs that contain variable concentrations of organohalogen contaminants represents a minimally invasive approach to characterize potential effects of exposure using in vitro bioassays. In the present study, a rapid, efficient lipid freeze-filtration extraction method was used to prepare extracts from double-crested cormorant eggs collected from 5 breeding colonies that had variable organohalogen contaminant burdens. Extracts, solubilized in dimethyl sulfoxide, were administered to chicken embryonic hepatocytes (CEHs) to determine effects on cell viability, 7-ethoxyresorufin-O-deethylase (EROD) activity, and messenger RNA expression using a chicken ToxChip polymerase chain reaction (PCR) array. The EROD median effect concentration (EC50) values were lower for extracts with greater organohalogen contaminant burdens and thus permitted an initial ranking of colonies based on the efficacy of eliciting an aryl hydrocarbon receptor-mediated response. The ToxChip PCR array data provided a more exhaustive, pathway-based evaluation of extract effects; variability in the transcriptomic profiles was associated with organohalogen contaminant burdens. For example, extracts from Mud Island (Detroit River, MI, USA) had among the highest organohalogen contaminant burdens and elicited a greater biochemical (EROD EC50 = 0.005) and transcriptomic response (22/43 genes altered on the array) in CEHs compared with the least contaminated site, which was Mandarte Island (BC, Canada; EROD EC50 = 0.172; 8/43 genes altered). Avian eggs represent a useful biomonitoring tool for determining complex mixture effects, and the combination of a rapid extraction method, an in vitro bioassay, and targeted endpoint evaluation (biochemical and transcriptomic) shows great promise as an environmental effects monitoring approach. Environ Toxicol Chem 2019;38:811-819. © 2019 Crown in the right of Canada. Published by Wiley Periodicals Inc. on behalf of SETAC., (© 2019 Crown in the right of Canada. Published by Wiley Periodicals Inc. on behalf of SETAC.)

Pilot-scale tests were performed to reduce the formation of a range of carbonaceous and nitrogenous disinfection by-products (C-, N-DBPs), by removing or transforming their precursors, with an integrated permanganate oxidation and powdered activated carbon adsorption (PM-PAC) treatment process before conventional water treatment processes (coagulation-sedimentation-filtration, abbreviated as CPs). Compared with the CPs, PM-PAC significantly enhanced the removal of DOC, DON, NH3(+)-N, and algae from 52.9%, 31.6%, 71.3%, and 83.6% to 69.5%, 61.3%, 92.5%, and 97.5%, respectively. PM pre-oxidation alone and PAC pre-adsorption alone did not substantially reduce the formation of dichloroacetonitrile, trichloroacetonitrile, N-nitrosodimethylamine and dichloroacetamide. However, the PM-PAC integrated process significantly reduced the formation of both C-DBPs and N-DBPs by 60-90% for six C-DBPs and 64-93% for six N-DBPs, because PM oxidation chemically altered the molecular structures of nitrogenous organic compounds and increased the adsorption capacity of the DBP precursors, thus highlighting a synergistic effect of PM and PAC. PM-PAC integrated process is a promising drinking water technology for the reduction of a broad spectrum of C-DBPs and N-DBPs., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

A polyvinylimidazole/sol-gel composite is proposed as a novel solid-phase microextraction fiber to extract five halobenzenes from the headspace of aqueous solutions in combination with gas chromatography with mass spectrometry. The prepared fiber was characterized by scanning electron microscopy and Fourier transform infrared spectroscopy. The obtained results showed that porous polyvinylimidazole/sol-gel composite was chemically deposited on fused silica fiber. The effect of important extraction parameters including extraction temperature, extraction time, and salt content were investigated. The optimum conditions were as follows: extraction temperature 25°C, extraction time 20 min, and salt concentration 30 w/v%. Detection limits and relative standard deviations of the developed method for halogenated benzenes were below 0.1 pg/mL and 15%, respectively. Repeatability of the proposed method, explained by relative standard deviation, varied between 5.48 and 9.15% (n = 5). The limits of detection (S/N = 3) ranged between 0.01 and 0.10 ng/L using gas chromatography with mass spectrometry with selected ion monitoring mode. For real sample analysis, three types of water samples with different matrices (ground, surface, and tap water) were studied. The optimized procedure was applied to extraction and method validation of halogenated benzenes in spiked water samples., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A lab-scale granular activated carbon sequencing batch biofilm reactor (GAC-SBBR), a combined adsorption and biological process, was developed to treat real wastewater from a recycled paper mill. In this study, one-consortia of mixed culture (4000-5000 mg/L) originating from recycled paper mill activated sludge from Kajang, Malaysia was acclimatized. The GAC-SBBR was fed with real wastewater taken from the same recycled paper mill, which had a high concentration of chemical oxygen demand (COD) and adsorbable organic halides (AOX). The operational duration of the GAC-SBBR was adjusted from 48 h to 24, 12 and finally 8 h to evaluate the effect of the hydraulic retention time (HRT) on the simultaneous removal of COD and AOX. The COD and AOX removals were in the range of 53-92% and 26-99%, respectively. From this study, it was observed that the longest HRT (48 h) yielded a high removal of COD and AOX, at 92% and 99%, respectively., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

Two in-line enrichment procedures (large volume sample stacking (LVSS) and field amplified sample injection (FASI)) have been evaluated for the CZE analysis of haloacetic acids (HAAs) in drinking water. For LVSS, separation on normal polarity using 20 mM acetic acid-ammonium acetate (pH 5.5) containing 20% ACN as BGE was required. For FASI, the optimum conditions were 25 s hydrodynamic injection (3.5 kPa) of a water plug followed by 25 s electrokinetic injection (-10 kV) of the sample, and 200 mM formic acid-ammonium formate buffer at pH 3.0 as BGE. For both FASI and LVSS methods, linear calibration curves (r(2) >0.992), limit of detection on standards prepared in Milli-Q water (49.1-200 μg/L for LVSS and 4.2-48 μg/L for FASI), and both run-to-run and day-to-day precisions (RSD values up to 15.8% for concentration) were established. Due to the higher sensitive enhancement (up to 310-fold) achieved with FASI-CZE, this method was selected for the analysis of HAAs in drinking water. However, for an optimal FASI application sample salinity was removed by SPE using Oasis WAX cartridges. With SPE-FASI-CZE, method detection limits in the range 0.05-0.8 μg/L were obtained, with recoveries, in general, higher than 90% (around 65% for monochloroacetic and monobromoacetic acids). The applicability of the SPE-FASI-CZE method was evaluated by analyzing drinking tap water from Barcelona where seven HAAs were found at concentration levels between 3 and 13 μg/L., (Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Humic acid (HA) was extracted and separated into different molecular weight (MW) fractions, then coagulated by aluminum chloride and polyaluminum chloride (PACl). The removal of disinfection byproduct (DBP) precursors and the aluminum speciation variation of the coagulants were investigated in detail. In particular, the role of aluminum speciation in the removal of DBP precursors was discussed. During the coagulation process, AlCl3 hydrolyzed into dominating in situ Al13 species at pH 5.5. The in situ Al13 species exhibited better removal ability for haloacetic acid (HAA) precursors than PACl. At pH 7.5, in situ hydrolyzed Al13 species of AlCl3 decomposed into dimeric Al species. In this case, preformed Al13 of PACl had a high removal ability of HAA precursors. Specially, the greatest reduction of HAA precursors with a low MW (<30 kDa) was through charge neutralization at pH 5.5, and that of HAA precursors in high MW (> 30 kDa) fractions was through adsorption at pH 7.5. Different from HAA precursors, the in situ Al13 species did not have a high removal ability of trihalomethane (THM) precursors. Therefore, PACl exhibited a better removal ability of THM precursors than AlCl3 at different pH values. In the different MW fractions, the greatest reduction of THM precursors was through charge neutralization at pH 5.5.

Pulp mill effluent containing toxic chemicals was treated by different advanced oxidation processes (AOPs) consisting of treatments by hydrogen peroxide, Fenton's reagent (H2O2/Fe2+), UV, UV/H2O2, photo-Fenton (UV/H2O2/Fe2+), ozonation and peroxone (ozone/H2O2) in laboratory-scale reactors for color, total organic carbon (TOC) and adsorbable organic halogens (AOX) removals from the pulp mill effluent. Effects of some operating parameters such as the initial pH, oxidant and catalyst concentrations on TOC, color, AOX removals were investigated. Almost every method used resulted in some degree of color removal from the pulp mill effluent. However, the Fenton's reagent utilizing H2O2/Fe2+ resulted in the highest color, TOC and AOX removals under acidic conditions when compared with the other AOPs tested. Approximately, 88% TOC, 85% color and 89% AOX removals were obtained by the Fenton's reagent at pH 5 within 30 min. Photo-Fenton process yielded comparable TOC (85%), color (82%) and AOX (93%) removals within 5 min due to oxidations by UV light in addition to the Fenton's reagent. Fast oxidation reactions by the photo-Fenton treatment makes this approach more favorable as compared to the others used.

The effects of granular activated carbon filtration and of the combination of ozonation and GAC filtration on the quality of Rhine water were studied in a pilot plant. The scope of the study was to compare both systems in relation to the removal of organic contaminants in water, and to the reduction of the side effects of chlorination. The water quality was measured with organic surrogate parameters (organohalogen, -nitrogen, -phosphorus and -sulphur) and in bacterial mutagenicity assays. In this particular setting, the combination of ozonation and GAC filtration was superior in all points to GAC filtration alone. The effects of ozonation are sometimes quite different, depending on the type of water treated. Its positive influence should be confirmed in a local situation. As GAC treatment causes a shift towards formation of more brominated THM after chlorination, special attention was given to this item. A higher inorganic bromide/DOC ratio resulted in higher brominated THM concentrations after chlorination. However, the mutagens formed during chlorination in presence of more inorganic bromide could be inactivated more easily by rat liver homogenate than in the normal setting. The results of this study confirmed earlier findings stating a negative influence of chlorination on water quality.