Search

Oil-water separation technology contributes to reduce the initial cost and running cost of the facilities for wastewater treatment, and reuse the recovered oil as valuable resources, such as edible oil under sanitalization equipment in food factory, material for biofuel or automobile tire. Using Value Function and Separative Work Unit (SWU) of separation engineering for the oil-water separation technology in the food processing factory, Naoetsu-Yushi Co. Ltd. Japan, economical advantage of the separation technology was clarified from the viewpoint of reducing the initial cost and running cost of the facilities for wastewater treatment, and reusing the recovered oil. [ABSTRACT FROM AUTHOR]

A comparative evaluation of economic efficiency was performed for native polyculture microalgae oil production in an oxidation ditch (OD) process wastewater treatment plant (WWTP). A cost function was developed for the process. The operational cost per 1 m3 of wastewater (w.w.) was 1.34 $/m3-w.w. in the existing scenario, 1.29 $/m3-w.w. in algal scenario A (no cost for CO2 and waste heat) and 1.36 $/m3-w.w. in algal scenario B (no cost for CO2). The conditions were set as follows: hydraulic retention time (HRT): 4 days, microalgal productivity: 0.148 g/L and daily treatment volume: 81.6 m3-w.w./d. The cost differences were related to the increase in polymer flocculants for algae separation (+0.23 $/m3-w.w), carbon credits from CO2 absorption (−0.01 $/m3-w.w), the sales of biocrude (−0.04 $/m3-w.w) and sludge disposal (−0.18 $/m3-w.w). Hence, the introduction of the algae scenario was the same cost-effective as the existing scenario. Microalgae oil production in an OD process WWTP can serve as a new energy system and reduce the environmental load in a society with a declining population. [ABSTRACT FROM AUTHOR]

A comparative evaluation of energy requirement and CO2 emission was performed for native polyculture microalgae oil production in a wastewater treatment plant (WWTP). The wastewater provided nutrients for algae growth. Datasets of microalgae oil production and their details were collected from the Minamisoma pilot plant. Environmental impact estimation from direct energy and material balance was analyzed using SimaPro® v8.0.4. in two scenarios: existing and algal scenarios. In the existing scenario, CO2 emission sources were from wastewater treatment, sludge treatment, and import of crude oil. In the algal scenario, CO2 emission with microalgae production was considered using wastewater treatment, CO2 absorption from growing algae, and hydrothermal liquefaction (HTL) for extraction, along with the exclusion of exhausted CO2 emission for growing algae and use of discharged heat for HTL. In these two scenarios, 1 m3 of wastewater was treated, and 2.17 MJ higher heating value (HHV) output was obtained. Consequently, 2.76 kg-CO2 eq/m3-wastewater in the existing scenario and 1.59 kg-CO2 eq/m3-wastewater in the algal scenario were calculated. In the HTL process, 21.5 MJ/m3-wastewater of the discharged heat energy was required in the algal scenario. Hence, the efficiency of the biocrude production system will surpass those of the WWTP and imported crude oil. [ABSTRACT FROM AUTHOR]