Search

The cryopreservation of teleost eggs and embryos remains challenging, and there are no previous reports that demonstrate successful cryopreservation in medaka (Oryzias latipes). We have reported egg and sperm production, followed by the generation of donor-derived offspring by transplanting vitrified whole testes-derived testicular cells into surrogate fish. The vitrification solutions contained ethylene glycol, sucrose, and ficoll. In this study, we replaced sucrose with trehalose in the vitrification solution and medaka whole testes were vitrified with the solution. The post-vitrification survival (72.8 ± 3.5 %) was markedly improved compared with that achieved using the sucrose-containing solution (44.7 ± 4.2 %). Moreover, we demonstrated the production of eggs, sperm, and donor-derived offspring from testicular cells transplanted into surrogate recipients. The phenotype of donor-derived offspring was identical to that of transplanted testicular cells. These findings suggest that trehalose is effective for the vitrification of medaka whole testis and can be considered an effective and reliable method for the long-term preservation of their genetic resources., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

Intracellular ice formation during cryopreservation is lethal to the cell, including during warming. Here, we examined the effect of sample volume and warming rate on the cryopreservation success of 1-cell rat embryos based on successful development into blastocysts in vitro and to term in vivo following embryo transfer. Embryos were equilibrated in 5% propylene glycol solution for 10 min, held for 40 s at 0 °C in cryopreservation solution (5%PG + PEPeS), and cooled by immersion in liquid nitrogen. When 1-cell embryos were cryopreserved in a volume of 30-100 μL at a cooling rate of 5830-7160 °C/min and warmed at 35,480-49,400 °C/min by adding 1 mL of 0.3 M sucrose solution at 50 °C, 17.3-28.8% developed into blastocysts, compared with 57.0% of untreated embryos. However, when 1-cell embryos were cryopreserved in a smaller volume of 15 μl at 7950 °C/min and warmed at 68,850 °C/min, 58.8 ± 10.6% developed into blastocysts and 50.0 ± 7.4% developed to term, comparable to that of non-treated embryos (57.0 ± 5.4% and 51.4 ± 3.1%, respectively). Cryopreserved embryos at other developmental stages also showed high in vitro culture potential similar to that of the control. Using a conventional cryotube and a small-volume vitrification procedure with rapid warming, we achieved high levels of subsequent rat embryonic development at all developmental stages., (© 2023. The Author(s).)

To cryopreserve cells, it is essential to avoid intracellular ice formation during cooling and warming. One way to achieve this is to convert the water inside the cells into a non-crystalline glass. It is currently believed that to accomplish this vitrification, the cells must be suspended in a very high concentration (20-40%) of a glass-inducing solute, and subsequently cooled very rapidly. Herein, we report that this belief is erroneous with respect to the vitrification of one-cell rat embryos. In the present study, one-cell rat embryos were vitrified with 5 μL of EFS10 (a mixture of 10% ethylene glycol (EG), 27% Ficoll, and 0.45 M sucrose) in cryotubes at a moderate cooling rate, and warmed at various rates. Survival was assessed according to the ability of the cells to develop into blastocysts and to develop to term. When embryos were vitrified at a 2613 °C/min cooling rate and thawed by adding 1 mL of sucrose solution (0.3 M, 50 °C) at a warming rate of 18 467 °C/min, 58.1 ± 3.5% of the EFS10-vitrified embryos developed into blastocysts, and 50.0 ± 4.7% developed to term. These rates were similar to those of non-treated intact embryos. Using a conventional cryotube, we achieved developmental capabilities in one-cell rat embryos by rapid warming that were comparable to those of intact embryos, even using low concentrations (10%) of cell-permeating cryoprotectant and at low cooling rates., (© The Author(s) 2021. Published by Oxford University Press on behalf of Society for the Study of Reproduction. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.)

Preventing intracellular ice formation is essential to cryopreserve cells. Prevention can be achieved by converting cell water into a non-crystalline glass, that is, to vitrify. The prevailing belief is that to achieve vitrification, cells must be suspended in a solution containing a high concentration of glass-inducing solutes and cooled rapidly. In this study, we vitrified 1-cell mouse embryos and examined the effect of the cooling rate, the warming rate, and the concentration of cryoprotectant on cell survival. Embryos were vitrified in cryotubes. The vitrification solutions used were EFS20, EFS30, and EFS40, which contained ethylene glycol (20, 30 and 40% v/v, respectively), Ficoll (24%, 21%, and 18% w/v, respectively) and sucrose (0.4 0.35, and 0.3 M, respectively). A 5-μl EFS solution suspended with 1-cell embryos was placed in a cryotube. After 2 min in an EFS solution at 23 °C, embryos were vitrified by direct immersion into liquid nitrogen. The sample was warmed at 34 °C/min, 4,600 °C/min and 6,600 °C/min. With EFS40, the survival was low regardless of the warming rate. With EFS30 and EFS20, survival was also low when the warming rate was low, but increased with higher warming rates, likely due to prevention of intracellular ice formation. When 1-cell embryos were vitrified with EFS20 and warmed rapidly, almost all of the embryos developed to blastocysts in vitro. Moreover, when vitrified 1-cell embryos were transferred to recipients at the 2-cell stage, 43% of them developed to term. In conclusion, we developed a vitrification method for 1-cell mouse embryos by rapid warming using cryotubes., (Copyright © 2018 Elsevier Inc. All rights reserved.)

The medaka (Oryzias latipes) is a teleost model distinguished from other model organisms by the presence of inbred strains, wild stocks, and related species. Cryopreservation guarantees preservation of these unique biological resources. However, because of their large size, cryopreservation techniques for their eggs and embryos have not been established. In the present study, we established a methodology to produce functional gametes from cryopreserved testicular cells (TCs). Whole testes taken from medaka were cryopreserved by vitrification. After thawing, the cells dissociated from cryopreserved testicular tissues were intraperitoneally transplanted into sterile triploid hatchlings. Some cells, presumably spermatogonial stem cells, migrated into the genital ridges of recipients and resulted in the production of eggs or sperm, based on sex of the recipient. Mating of recipients resulted in successful production of cryopreserved TC-derived offspring. We successfully produced individuals from the Kaga inbred line, an endangered wild population in Tokyo, and a sub-fertile mutant (wnt4b -/- ) from cryopreserved their TCs. This methodology facilitates semi-permanent preservation of various medaka strains.

Intracellular ice is generally lethal. One way to avoid it is to vitrify cells; that is, to convert cell water to a glass rather than to ice. The belief has been that this requires both the cooling rate and the concentration of glass-inducing solutes be very high. But high solute concentrations can themselves be damaging. However, the findings we report here on the vitrification of mouse oocytes are not in accord with the first belief that cooling needs to be extremely rapid. The important requirement is that the warming rate be extremely high. We subjected mouse oocytes in the vitrification solution EAFS 10/10 to vitrification procedures using a broad range of cooling and warming rates. Morphological survivals exceeded 80% when they were warmed at the highest rate (117,000°C/min) even when the prior cooling rate was as low as 880°C/min. Functional survival was >81% and 54% with the highest warming rate after cooling at 69,000 and 880°C/min, respectively. Our findings are also contrary to the second belief. We show that a high percentage of mouse oocytes survive vitrification in media that contain only half the usual concentration of solutes, provided they are warmed extremely rapidly; that is, >100,000°C/min. Again, the cooling rate is of less consequence.

Previously, we showed that the exogenous expression of aquaporin 3 (AQP3), an aquaglyceroporin, improved the tolerance of mouse oocytes to vitrification with a glycerol-based solution. In the present study, we examined conditions suitable for the expression of AQP3 and the ability of vitrified oocytes to develop in vitro and in vivo after fertilization. After only partial remove of cumulus cells, immature mouse oocytes (germinal vesicle stage) were injected with 5, 10 or 20 pg of AQP3 cRNA and cultured for 12 h for maturation. When matured oocytes were vitrified with a glycerol-based solution, 57-61% survived regardless of the amount of cRNA injected (5-20 pg). By contrast, no oocytes injected with water (control) survived. When the zona pellucida was removed from the vitrified oocytes and the oocytes were then fertilized in vitro and cultured, the proportions that were fertilized and developed into blastocysts were higher when the amount of cRNA injected was 5 pg than 10-20 pg. When 16 blastocysts were transferred to a pseudopregnant mouse, 5 developed to term, demonstrating that oocytes vitrified after injection of AQP3 cRNA retained the ability to develop to term. The water-permeability of cRNA-injected oocytes was higher than that of control oocytes from the maturing stage to the 1-cell zygote stage, whereas glycerol-permeability was higher only at metaphase II. This indicates that AQP3 was expressed for a relatively short period of time. These results suggest that the transient expression of water/cryoprotectant channels is effective for cryopreserving cells that have low membrane-permeability, such as mammalian oocytes.

There is great interest in achieving reproducibly high survivals of mammalian oocytes (especially human) after cryopreservation, but the results to date have not matched the interest. A prime cause of cell death is the formation of more than trace amounts of intracellular ice, and one strategy to avoid it is vitrification. In vitrification procedures, cells are loaded with high concentrations of glass-inducing solutes and cooled to -196°C at rates high enough to presumably induce the glassy state. In the last decade, several devices have been developed to achieve very high cooling rates. Nearly all in the field have assumed that the cooling rate is the critical factor. The purpose of our study was to test that assumption by examining the consequences of cooling mouse oocytes in a vitrification solution at four rates ranging from 95 to 69,250°C/min to -196°C and for each cooling rate, subjecting them to five warming rates back above 0°C at rates ranging from 610 to 118,000°C/min. In samples warmed at the highest rate (118,000°C/min), survivals were 70% to 85% regardless of the prior cooling rate. In samples warmed at the lowest rate (610°C/min), survivals were low regardless of the prior cooling rate, but decreased from 25% to 0% as the cooling rate was increased from 95 to 69,000°C/min. Intermediate cooling and warming rates gave intermediate survivals. The especially high sensitivity of survival to warming rate suggests that either the crystallization of intracellular glass during warming or the growth by recrystallization of small intracellular ice crystals formed during cooling are responsible for the lethality of slow warming., (Copyright © 2010 Elsevier Inc. All rights reserved.)

To cryopreserve cells, it is essential to avoid intracellular ice formation during cooling and warming. One way to do so is to subject them to procedures that convert cell water into a non-crystalline glass. Current belief is that to achieve this vitrification, cells must be suspended in very high concentrations of glass-inducing solutes (i.e., ⩾6molal) and cooled at very high rates (i.e., ≫1000°C/min). We report here that both these beliefs are incorrect with respect to the vitrification of 8-cell mouse embryos. In this study, precompaction 8-cell embryos were vitrified in several dilutions of EAFS10/10 using various cooling rates and warming rates. Survival was based on morphology, osmotic functionality, and on the ability to develop to expanded blastocysts. With a warming rate of 117,500°C/min, the percentages of embryos vitrified in 1×, 0.75×, and 0.5× EAFS that developed to blastocysts were 93%, 92%, and 83%, respectively. And the percentages of morphological survivors that developed to expanded blastocysts were 100%, 92%, and 97%, respectively. Even when the solute concentration of the EAFS was reduced to 33% of normal, we obtained 40% functional survival of these 8-cell embryos. [ABSTRACT FROM AUTHOR]

Abstract: The formation of more than trace amounts of ice in cells is lethal. The two contrasting routes to avoiding it are slow equilibrium freezing and vitrification. The cryopreservation of mammalian oocytes by either method continues to be difficult, but there seems a slowly emerging consensus that vitrification procedures are somewhat better for mouse and human oocytes. The approach in these latter procedures is to load cells with high concentrations of glass-inducing solutes and cool them at rates high enough to induce the glassy state. Several devices have been developed to achieve very high cooling rates. Our study has been concerned with the relative influences of warming rate and cooling rate on the survival of mouse oocytes subjected to a vitrification procedure. Oocytes suspended in an ethylene glycol–acetamide–Ficoll–sucrose solution were cooled to −196°C at rates ranging from 37 to 1827°C/min between 20 and −120°C, and for each cooling rate, warmed at rates ranging from 139 to 2950°C/min between −70 and −35°C. The results are unambiguous. If the samples were warmed at the highest rate, survivals were >80% over cooling rates of 187–1827°C/min. If the samples were warmed at the lowest rate, survivals were near 0% regardless of the cooling rate. We interpret the lethality of slow warming to be a consequence of it allowing time for the growth of small intracellular ice crystals by recrystallization. [Copyright &y& Elsevier]

Abstract: When cells that have been subjected to supposedly innocuous freezing or vitrification procedures are used as the source material for subsequent experiments, it is important that they possess or exhibit the same relevant properties as fresh cells. In this study, we compared the temperatures of intracellular ice formation (IIF) in previously vitrified mouse oocytes/embryos with those in fresh intact ones. In the case of MII oocytes, 2-cell embryos, 4–6-cell embryos, and morulae, there are no significant differences (p >0.05); namely, –33.3°C (fresh) vs. –35.4°C (vitrified) with MII oocytes, –40.6°C (fresh) vs. –38.7°C (vitrified) with 2-cell embryos, –38.0°C (fresh) vs. –39.4°C (vitrified) with 4–6-cell embryos, –24.5°C (fresh) vs. –24.2°C (vitrified) with morulae. But, in 8-cell embryos, there is a significant difference (p <0.05) between fresh (−37.9°C) and vitrified (−32.9°C). If we include this significant difference, the overall IIF temperature of fresh cells is 0.74°C lower than that of previously vitrified cells. If we exclude it, the IIF temperature for fresh cells is 0.32°C higher than that for previously vitrified cells. Our conclusion then is that there is no difference between the IIF temperatures of fresh and previously vitrified cells. [ABSTRACT FROM AUTHOR]

Abstract: The first successful cryopreservation of fish embryos was reported in the Japanese flounder by vitrification [Chen and Tian, Theriogenology, 63, 1207–1219, 2005]. Since very high concentrations of cryoprotectants are needed for vitrification and fish embryos have a large volume, Japanese flounder embryos must have low sensitivity to cryoprotectant toxicity and high permeability to water and cryoprotectants. So, we investigated the sensitivity and the permeability of Japanese flounder embryos. In addition, we assessed the survival of flounder embryos after vitrification with solutions containing methanol and propylene glycol, following Chen and Tian’s report. The embryos were relatively insensitive to the toxicity of individual cryoprotectants at lower concentrations, especially methanol and propylene glycol as their report. Although their permeability to water and cryoprotectants could not be measured from volume changes in cryoprotectant solutions, the embryos appeared to be permeable to methanol but less permeable to DMSO, ethylene glycol, and propylene glycol. Although vitrification solutions containing methanol and propylene glycol, which were used in Chen and Tian’s report, were toxic to embryos, a small proportion of embryos did survived. However, when vitrified with the vitrification solutions, no embryos survived after warming. The embryos became opaque during cooling with liquid nitrogen, indicating the formation of intracellular ice during cooling. When embryos had been kept in vitrification solutions for 60min after being treated with the vitrification solution, some remained transparent during cooling, but became opaque during warming. This suggests that dehydration and/or permeation by cryoprotectants were insufficient for vitrification of the embryos even after they had been over-treated with the vitrification solutions. Thus, Chen and Tian’s cryopreservation method lacks general application to Japanese flounder embryos. [Copyright &y& Elsevier]