Search

In this paper, we propose and experimentally demonstrate HyperSight, which is a precise image decoding algorithm for the mobile-phone camera based visible light communication (VLC) system. The conventional algorithms have to select an appropriate column matrix, and then decode the image according to the fitting curve. The selection of the column matrix and the fitting of the function are not only time-consuming but also error-prone, leading to low decoding efficiency and high bit error rate (BER). While HyperSight calculates characteristic grayscale matrix to avoid column matrix selection and uses critical grayscale to replace the function fitting to decode the image. As expected, our algorithm not only reduces the BER, but also improves the processing performance. The experimental results show that, the BER can be reduced by two orders of magnitude on average compared with the conventional scheme. For the $4.8\,$ kbps data rate, our algorithm can achieve the transmission distance of $50\,$ cm under the $7\%$ forward error correction (FEC) threshold with the low illuminance of $702\,$ lux.

In this article, a novel method for constructing a pre-equalizer by optimized filter synthesis with vector fitting is proposed to broaden the bandwidth of a visible light communication (VLC) system. By using the proposed method, an active-passive hybrid equalization circuit is constructed, and it is demonstrated that the 3-dB bandwidth of the VLC system with commercially available phosphorescent white LED is extended from 30 MHz to 600 MHz. A 1.35 Gb/s NRZ-OOK VLC transmission over 12 cm free space transmission distance is experimentally realized, achieving a bit error rate (BER) of $\text{8.8} \times \text{10}^{-\text{5}}$ . To the best of the authors knowledge, this is the largest reported 3-dB bandwidth and real-time data rate achieved in the VLC system with a single commercially phosphorescent white LED.

In the paper, a mixed-interval multi-pulse position modulation (MI-MPPM) scheme for visible light communication (VLC) system is theoretical proposed and implemented on field programmable gate array (FPGA). It has better bandwidth efficiency than PPM and MPPM. And it has better anti-jamming than MPPM. A real-time VLC link based on phosphorescent white LED is also built to measure the performance of the proposed MI-MPPM scheme. The data rate of 104 Mbps in our VLC system under the distance of 60 cm could be achieved, and bit error rate is 3 . 81 × 1 0 − 5 . As far as we know, it is the highest data rate that can be achieved in continuous real-time VLC system with phosphorescent white LED based on PPM and its derivative modulation. The performance of VLC system under different distances, advantages and the possible application scenarios of MI-MPPM are also discussed.

Silicon photocell acts as the detector and energy convertor in the VLC system. The system model was set up and simulated in Matlab/Simulink environment. A 10 Hz square wave was modulated on LED and restored in voltage mode at the receiver. An energy gathering and signal detecting system was demonstrated at the baud rate of 19200, and the DC signal is about 2.77 V and AC signal is around 410 mV.

In order to ensure stable, correct and real-time high-speed transmission of indoor visible light communication (VLC), the key modulation and demodulation technologies of orthogonal frequency division multiplexing (OFDM) are studied in this paper. The time-domain synchronization, frequency synchronization and channel equalization of receiver are analyzed and optimized by utilizing short and long training preamble. Moreover, field programmable gate array (FPGA) development board (Xilinx Kintex-7) and Verilog hardware description language are used to realize the design of proposed OFDM-VLC system. Simulation and experiment both verify the feasibility of the hardware designs of this system. The proposed OFDM-based VLC system can process signal in real-time, which can be used in actual VLC application systems.

We propose and experimentally demonstrate a multi-channel uplink visible light communication (VLC) system for the first time, which is based on three commercially available white light emitting diodes (LED) and only one photo-diode (PD). By employing independent Xilinx field programmable gate arrays (FPGA), we realize the real-time data transmission. The on–off keying (OOK) modulation and time division multiple access (TDMA) techniques are combined together to offer a reliable multiple uplink access for three users. The electrical idle signal is designed to deal with serious inter-symbol interference (ISI) caused by the overlap of different LED signals at the receiver side, as well as to provide a stable illuminating environment. The experiment results indicate that our scheme has a great potential for the indoor practical VLC system implementation.

We experimentally demonstrate a high-speed phosphorescent white light emitting diode (LED) visible light communication (VLC) system without utilizing an optical blue filter. Here, the white light response is equalized by using the proposed analog equalizers. The 3 dB bandwidth of the VLC link could be extended from 3 to 132 MHz, which allows 330 Mbit/s non-return-to-zero on–off keying (NRZ-OOK) data transmission with a bit error ratio (BER) of 7.2×10−10 and 672 Mbit/s 64-quadrature amplitude modulation (64-QAM) data transmission with a BER of 3.2×10−3. These resultant BERs are less than the forward error correction (FEC) limit of 3.8×10−3. The VLC link distance is 1 m using a single 1 W LED. The transmitter and receiver modules are integrated to a compact size. Furthermore, the relationships between the signal performance and illumination level or optical power are investigated and analyzed.

This paper reports a high-speed OOK-NRZ visible light communication system using red, green and blue LDs, data rates of 1940Mb/s, 2660Mb/s and 2670Mb/s are obtained over distance of ∼1.5m. All the BERs are below 10-9.

The date rate of 610Mbps is experimentally achieved by 1 watt phosphor-based LED over 6.2 m with the average bit error rate of 2.0e–5. A 100Mbps optical internet access demo system without blue filter over 3 m distance is also demonstrated.

A research in extending bandwidth of the visible light communication (VLC) system that uses phosphorescent white LED has been reported in this letter. Slow response of the phosphorescent component limits the modulation bandwidth of white LED to the lower MHz range. In this letter, we present a post-equalization circuit that contains two passive equalizers and one active equalizer. With blue-filtering and the post-equalization circuit, a bandwidth of 151 MHz has been achieved in our VLC system, which allows OOK-NRZ data transmission up to 340 Mb/s. The VLC link operates at 43 cm using a single one Watt white LED, and the bit-error-ratio was below 2×10-3, which is within the forward error correction limit.

The bandwidth of white light emitting diodes (WLEDs) is an important factor that affects most of the system performances in visible light communication (VLC). It is mainly limited by the down-conversion phosphors. We propose in this paper to employ nanomaterial phosphors with short fluorescence lifetime and high quantum yield in VLC. The white-emitting device of bandwidth-based lifetime was fabricated by using several kinds of nanophosphors with different fluorescence lifetimes. Moreover, we proposed two theoretical models to analyze the factors that affect bandwidth. Compared with the commercial YAG-based WLEDs, the bandwidth of nanophosphor-based WLEDs can be improved over three times and close to the blue excitation sources. Our study indicates that nanophosphors can become promising fluorescent materials in VLC, and provides a new direction for developing wide-bandwidth VLC systems.

This paper reports a visible light communication application system realizing 10 Mbps Ethernet access for indoor personal area network based on a phosphorescent white LED, operating with high signal to noise ratio (>45 dB).

Quantum dot white light-emitting diodes (QD-WLEDs) were fabricated from green- and red-emitting AgInS2/ZnS core/shell QDs coated on GaN LEDs. Their electroluminescence (EL) spectra were measured at different currents, ranging from 50 mA to 400 mA, and showed good color stability. The modulation bandwidth of previously prepared QD-WLEDs was confirmed to be much wider than that of YAG:Ce phosphor-based WLEDs. These results indicate that the AgInS2/ZnS core/shell QDs are good color-converting materials for WLEDs and they are capable in visible light communication (VLC).

Visible light communication (VLC) is an emerging technology in optical wireless communication (OWC) that has attracted worldwide research in recent years. VLC can combine communication and illumination together, which could be applied in many application scenarios such as visible light communication local area networks (VLANs), indoor localization, and intelligent lighting. In recent years, pioneering and significant work have been made in the field of VLC. In this paper, an overview of the recent progress in VLC is presented. We also demonstrate our recent experiment results including bidirectional 100 Mbit/s VLAN or Li-Fi system based on OOK modulation without blue filter. The VLC systems that we proposed are good solutions for high-speed VLC application systems with low-cost and low-complexity. VLC technology shows a bright future due to its inherent advantages, shortage of RF spectra and ever increasing popularity of white LEDs.

An indoor wireless communication system using off-the-shelf white LED was presented in this paper. We adopted OOK (On-Off Keying) modulation in transmitter module. Data transmission was realized based on RS-485 protocol. A DC-balanced coding with error check and correction abilities was applied to avoid blinking and improve the performance of the system. The system can keep 10-7 error bit rate within 2.5m reach at a rate up to 115200 bps.

In this paper, we first experimentally demonstrate a 550 Mbit/s real-time visible light communication (VLC) system based on nonreturn-to-zero on-off keying (NRZ-OOK) modulation of a commercial phosphorescent white light LED. The 3-dB modulation bandwidth of such devices is only a few megahertz. We proposed an analog pre-emphasis circuit based on NPN transistors and an active post-equalization circuit based on an amplifier to enhance the 3-dB bandwidth of VLC link. Utilizing our proposed pre-emphasis and post-equalization circuits, the 3-dB bandwidth of VLC link could be extended from 3 to 233 MHz with blue-filter, to the best of our knowledge, which is the highest ever achieved in VLC systems reported. The achieved data rate was 550 Mbit/s at the distance of 60 cm and the resultant bit-error-ratio (BER) was 2.6 × 10(-9). When the VLC link operated at 160 cm, the data rate was 480 Mbit/s with 2.3 × 10(-7) of BER. Our proposed VLC system is a good solution for high-speed low-complexity application.