Search

Highly ordered TiO2 nanotube (TiO2 NT) arrays were prepared by anodic oxidizing method on the surface of the Ti substrate. Nitrogen-doped TiO2 nanotube (N-TiO2 NT) arrays were carried out by ammonia solution immersion, and Ag nanoparticles loaded N-doped TiO2 nanotube (Ag/N-TiO2 NT) arrays were obtained by successive ionic layer adsorption and reaction (SILAR) technique. The samples were characterized by the X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FESEM), high-resolution transmission electron microscopy (HRTEM), photoluminescence (PL) emission spectra, ultraviolet–visible (UV–vis) diffuse reflectance spectroscopy (DRS). The result indicated that the diameter and wall thickness of the TiO2 NT are 100–120 and 20–30 nm, respectively. Moreover, the morphology and structure of the highly ordered TiO2 NTs were not affected by N-doping. Furthermore, Ag nanoparticles were evenly deposited on the surface of TiO2 NTs in the form of elemental silver. Finally, the photocatalytic activity of Ag/N-TiO2 NTs was evaluated by degradation of methyl orange (MO) under visible-light irradiation. The Ag/N-TiO2 NTs exhibited enhanced photocatalytic properties, which could reach 95% after 90-min irradiation.

Highly ordered TiO2 nanotube arrays (TiO2 NTs) were prepared by anodic oxidizing method on a surface of Ti substrate. Fabrication of nitrogen-doped TiO2 nanotube arrays (N-TiO2 NTs) was carried out by immersion in ammonia solution. CdS nanoparticles loaded N-doped TiO2 nanotube arrays (CdS/N-TiO2 NTs) were obtained by successive ionic layer adsorption and reaction (SILAR) technique. The samples were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), photoluminescence (PL) emission spectra and ultraviolet-visible (UV-Vis) diffuse reflectance spectroscopy (DRS). The results indicate that the TiO2 nanotube diameter and wall thickness are 100 nm to 120 nm and 20 nm to 30 nm, respectively. Moreover, the morphology and structure of the highly ordered TiO2 NTs are not affected by N-doping. Furthermore, CdS nanoparticles are evenly distributed on the surface of TiO2 NTs. Finally, the photocatalytic activity of CdS/N-TiO2 NTs was evaluated by degradation of MO under visible-light irradiation. Compared with TiO2 NTs, N-TiO2 NTs, CdS/N-TiO2 NTs exhibited enhanced photocatalytic properties, and the highest degradation rate of CdS/N-TiO2NTs could reach 97.6 % after 90 min of irradiation. [ABSTRACT FROM AUTHOR]

Using density-functional theory (DFT) calculations within the generalized gradient corrected approximation, the models that nonmetallic impurities X (X = C, N, S, F) substituted for O or Ti sites in anatase TiO 2 were investigated. By calculating the formation energy of X-monodoped TiO 2 with X substituted for O, we suggested that X dopants existed as C 4− , N 3− , S 2− and F − ions, respectively. Meanwhile, the X dopants existed as C 4+ , N 3+ , and S 6+ for X-monodoped (X = C, N, S) TiO 2 with X substituted for Ti. The conclusion of the valence states of nonmetallic impurities X substituted for O or Ti sites in TiO 2 is also supported by the results of optimized cell parameters and the local structures. Furthermore, an effective nonmetallic passivated codoping approach to modify the band edges of TiO 2 is proposed. Based on the first-principle calculations, we suggested that nonmetallic passivated groups such as (S 2− + C 4+ ) and (C 4− + S 6+ ) could reduce the band gap largely and make less perturbation in conduction band minima (CBM), thus lead to an ideal visible-light absorption region without affecting the reducing power. This work provides some new results and is anticipated to give some inspiration and guidance for design visible-light-driven TiO 2 photocatalyst with high efficiency. [ABSTRACT FROM AUTHOR]

Abstract: The composites of ultrafine TiO2 nanoparticles and graphene sheets (GSs) were prepared via a direct redox reaction. Investigation of morphological features of the composite indicated that nano-sized TiO2 particles were distributed on the surfaces of GSs. The as-prepared TiO2/GSs photocatalysts possessed extended light absorption range, which could be excitated by visible light. These visible-light active photocatalysts were utilized for degradation of Escherichia coli bacteria, and their antibacterial activity against E. coli was much higher than that of pure TiO2 nanoparticles. Overall, a material with high antibacterial activity under ambient visible light illumination was developed, which could be widely used for indoor air disinfection. [Copyright &y& Elsevier]

A hydrothermal method was employed to synthesize the novel 2D/2D BiOCl/H+Ti 2 NbO 7 − heterojunction photocatalysts, showing the improved photocatalytic RhB degradation efficiency. • 2D/2D BiOCl/H+Ti 2 NbO 7 − heterojunction was synthesized by a hydrothermal route. • 2D/2D heterostructure facilitated the efficient charge separation and transfer. • BiOCl/H+Ti 2 NbO 7 − showed the high photoactivity due to heterojunction formation. • The h+ and •O 2 − played a crucial role in RhB photodegradation. To realize highly efficient removal of organic pollutant is a hot spot in environmental and energy science. Herein, we firstly prepared re-stacked H+Ti 2 NbO 7 − nanosheets (HTN) to fabricate the novel two-dimensional (2D)-2D BiOCl/H+Ti 2 NbO 7 − (BHT) heterojunctions by a hydrothermal method. The HTN were well combined with BiOCl nanoplates with an intimate interface to form a heterostructure. The rhodamine B (RhB) molecules were used as a target pollutant to evaluate the photocatalytic performance of samples under visible light. All BHT composites, with an optimal sample of BHT-4, showed the improved photocatalytic activity for degradating RhB compared with the single BiOCl and HTN. The enhanced activity was mainly attributed to the efficient charge separation and transfer, which was resulted from the formation of heterojunction between BiOCl and HTN. The produced active species can be detected by trapping experiments and ESR spectra. It indicated that hole (h+) and superoxide radical (O 2 −) played a crucial role in the photocatalytic RhB degradation, while hydroxyl radical (OH) contributed a little. A possible photodegradation mechanism was also discussed based on the corresponding experimental results. This work provides an insight for preparing 2D/2D heterojunctions with a high photocatalytic activity. [ABSTRACT FROM AUTHOR]