Search

Lightweight electric vehicles (LEVs) possess great advantages in the viewpoint of fuel consumption, environment protection and traffic mobility. However, due to the drastic reduction of vehicle weights and body size, the effects of payload parameter variation in LEV control and estimation system become much more pronounced and have to be systematically analysed. This paper proposes a novel payload parameter sensitivity analysis to provide quantitative insight into the sensitivity of payload parameter on the LEV system responses and state estimation. The analysis-oriented LEV dynamic model considering payload parameter variations is developed. Then, the trajectory sensitivity index of the influential parameters is defined and derived with the perturbation approach, the median method is used to improve the calculation accuracy for the trajectory sensitivity of payload parameter. Finally, the extended Kalman filter is designed to show the effect and importance of the sensitive payload parameters on the observation accuracy, the payload parameter variations along with fundamental state estimation such as vehicle sideslip angle, longitudinal velocity and vehicle roll angle are analysed. Simulation results with Matlab/Simulink-Carsim® show that the proposed method can accurately describe the relationship between the vehicle payload parameters and system state estimation, which is helpful to design and evaluate LEV controller and observer performances. [ABSTRACT FROM AUTHOR]

The accurate knowledge of tire–road friction coefficient (TRFC) contributes to the optimization of driver maneuvers for further improving the safety of intelligent vehicles. The performance of the existing estimation methods would decline when a vehicle performs complex driving maneuvers. In addition, the mass parameter mismatch also deteriorates the estimation accuracy of TRFC. To address these problems, in this article, an integrated scheme for TRFC estimation is proposed by combining a strong tracking unscented Kalman filter and an interactive multiple model unscented Kalman filter. Real-time experiments are implemented on a mass-produced vehicle to demonstrate the feasibility and effectiveness of the proposed method. The results show that the proposed approach has better estimation accuracy than the existing ones under various driving scenarios. [ABSTRACT FROM AUTHOR]

This paper presents a stochastic stable control protocol for heterogeneous vehicle platoon subject to communication topologies change, external disturbance, and information delay. First, a random vehicle platoon system composed entirely of several pure electric vehicles is built. The random variation of data transmission link among the platoon in a natural traffic environment is considered and molded by the Markov chain combined with the directed graph method. The influence of delays and discrete data in wireless communication, road slope, and air resistance on the vehicle platoon is also considered by introducing the external interferences and equivalent information delays. Additionally, to ensure the vehicle platoon’s inner-vehicle stability, the variable-gain distributed controller is proposed based on the Markovian jumping system stability theory and $ H_\infty$ control. Finally, the $ \mathcal {L}_{2}$ stochastic string stability is defined to attenuate perturbations as they propagate through the platoon. Simulation studies about a vehicle platoon under four communication topologies random switching with two different control methods are provided to verify the theoretical result. It is shown that, compared to traditional platoon robust control, it is possible to achieve the vehicle platoon’s stability even if in the continuous mutation of unstable topologies by using the proposed control approach. [ABSTRACT FROM AUTHOR]

Onboard GNSS signal loss is a challenging issue for automated vehicles during driving in urban areas due to the effects of tall and dense buildings, flyovers, tunnels, and vegetation. To improve the vehicle localization accuracy when GNSS signals temporarily lost, this paper proposes a Geometry-based cooperative localization method (GCL) for the Internet of Vehicles. The vehicle position is estimated using mathematical geometry information, including vehicle dynamics and road shapes, which could reduce the environment-aware position constraint of cooperative localization. The relocation approach is enabled by communicating with neighboring vehicles to attenuate GNSS signal loss on localization-based services. The efficiency and scalability of GCL are evaluated in different driving conditions. The results showed that GCL achieved better localization performance than the state-of-the-art techniques in shorter and longer GNSS signal loss situations. The experimental results demonstrated the capabilities and effectiveness of the proposed algorithm to handle typical GNSS signal loss driving scenarios. [ABSTRACT FROM AUTHOR]

Reconstitution of control architecture creates a great challenge for distributed drive electric vehicles (DDEV), due to the emergence of a new distributed driving strategy. To this end, a novel distributed control architecture is proposed in this paper for integrated control of active front steering (AFS) system and direct yaw moment (DYC) system. First, a multi-agent system (MAS) is employed to construct a general framework, where AFS and DYC act as agents that work together to improve vehicle lateral stability and simultaneously reduce workloads of drivers during path tracking. The cooperative control strategies of two agents are obtained through Pareto-optimality theory to ensure optimal control performance of AFS and DYC. Then, on the basis of dynamic interaction between agents, terminal constraints, including terminal cost function and terminal input with local static feedback, are designed to guarantee the asymptotic stability of the close-loop system. Finally, virtual simulations are conducted to evaluate the proposed controller. The results indicate that the proposed control architecture can effectively preserve vehicle stability and reduce workloads of drivers, especially for the inexperienced driver. Furthermore, the hardware-in-loop (HIL) test results also demonstrate the feasibility of the proposed controller. [ABSTRACT FROM AUTHOR]

This paper presents an integrated platoon control framework for heterogeneous vehicles on curved roads with varying slopes, aerodynamic drag, and wireless communication delays. First, a linear heterogeneous vehicle platoon model with decoupled longitudinal and lateral dynamics is built based on nonlinear feedback linearization and arc-length parametric transformation of an arbitrary curved road. The external disturbances are also considered, including the up-down road slopes, wind and equivalent time-delays caused by the wireless communication delay and discrete data in onboard sensors. Second, to achieve stable platoon control on a curved road, the platoon uses the state-feedback control method in the longitudinal direction while each vehicle tracks the centerline of the curved road to realize lateral control. Longitudinally, an $ H_\infty$ platoon controller is designed based on the Lyapunov-Krasovskii functional to ensure the inner-vehicle and string stability of the platoon, which suffers from parameter uncertainty, and external disturbances. Additionally, the $ \mathcal {L}_2$ string stability is defined to guarantee that the perturbations do not grow unbounded as they propagate through the platoon. Simulation results indicate that the proposed robust controller achieves proper platoon intervehicle spacing in both the longitudinal and lateral directions. [ABSTRACT FROM AUTHOR]