Search

Introduction: The creation of synthetic reservoirs for bladder replacement has been limited by challenges of interfacing synthetic materials and native tissue. We sought to overcome this challenge by utilizing a novel bilayer silk fibroin scaffold (BLSF) as an intermediary toward the development of an acellular prosthetic reservoir. Methods: Under institutionally approved protocols, 3D-printed reservoirs were implanted in six juvenile female pigs after cystectomy. BLSF was attached to the in situ prosthetic reservoir serving as an intermediary to native ureteral and urethral tissue anastomoses. Our first protocol allowed four pigs to be survived up to 7 days, and the second protocol allowed two pigs to be survived for up to 1 year. At the first sign of functional decline or the end of the study period, the animals were euthanized, and kidneys, ureters, prosthetic bladder, and urethra were harvested en bloc for histopathology analysis. Results: The first two pigs had anastomotic urine leaks because of design flaws resulting in early termination. The third pig had acute renal failure resulting in early termination. The artificial bladder design was modified in subsequent iterations. The fourth pig survived for 7 days and, upon autopsy, had intact urethral and ureteral anastomoses. The fifth and sixth pigs survived for 11 and 12 weeks, respectively, before they were sacrificed because of failure to thrive. One animal developed an enteric fistula. The other animal had an intact anastomosis, and the BLFS was identified at the ureteral and urethral anastomoses on histopathologic analysis. Conclusions: Replacing the porcine bladder with a prosthetic bladder was achieved for up to 3 months, the second longest survival period for a nonbiologic bladder alternative. BLSF was used for the first time to create an interface between synthetic material and biologic tissue by allowing ingrowth of urothelium onto the acellular alloplastic bladder.

Objective: It has been previously reported that warming irrigation fluid higher than body temperature may decrease ureteral spasm and thereby facilitate ureteroscopic access to the proximal ureter. Our objective was to examine the effects on ureteral peristalsis and ureteral diameter if the irrigant was warmed to just under the biological threshold for injury. Materials and Methods: Two female adult Yorkshire pigs were studied in this pilot study. In the first pig, a dilute mixture of contrast and irrigation fluid at 37°C and then at 43°C was instilled for 30 minutes into each renal pelvis through a ureteral catheter at 40 mm Hg. Retrograde pyelogram images were captured for each trial and the caliber of the ureter was measured using Vitrea ® software. In the second pig, a lumbotomy was performed, and a magnetic sensor was placed on the extraluminal surface of the ureter to monitor ureteral peristalsis while repeating the aforedescribed regimen. Thirty minutes after the first regimen, the force exerted during placement of a 16F ureteral access sheath (UAS) was recorded at both temperatures using the University of California, Irvine Ureteral Force Sensor. Results: There was no statistically significant difference in ureteral caliber along the length of the ureter at 43°C ( p  = 0.87, p  = 0.32, p  = 0.66 for proximal, middle, and distal ureter, respectively). Indeed, there was an increase in peristalsis from baseline with fluid irrigation at 37°C and at 43°C (59% and 65%, respectively). There was no significant difference in the force exerted for UAS placement at either temperature. On histologic analysis, there were no significant changes in ureteral histology or luminal diameter. Conclusions: In a porcine model, warming irrigation fluid to just under the biological threshold for injury did not increase ureteral caliber, decrease ureteral peristalsis, or facilitate UAS placement. As such, during ureteroscopy, we continue to warm our irrigation fluid just to body temperature.

Purpose: Ureteral injury is a frequent complication of ureteral access sheath deployment. We sought to define the safe threshold of force for the passage of a ureteral access sheath using a novel ureteral access sheath force sensor., Materials and Methods: Ureteral access sheath-force sensor measurements were recorded in 210 renal units. A 16Fr ureteral access sheath was deployed initially based on a prior porcine study. If 6 N was reached, the surgeon was advised to downsize the 16Fr ureteral access sheath. In each case, a post-ureteroscopic lesion scale was recorded. Regression models were used to estimate the impact of adjusted variables on post-ureteroscopic lesion scale grade, 16Fr ureteral access sheath deployment, and peak force., Results: A 16Fr ureteral access sheath was deployed in 127 (61%) renal units with a mean peak force of 5.7 N. Two high-grade ureteral injuries occurred; in both cases >6 N of force was recorded. Post-ureteroscopic lesion scale grade correlated directly with peak insertion force (p <0.01). Bacteriuria within 60 days of the procedure (OR 2.009, p=0.034), combination of preoperative stent plus oral tamsulosin (OR 2.998, p=0.045), and prior ipsilateral stone surgery (OR 2.13, p=0.01) were independent predictors of successful 16Fr ureteral access sheath deployment. Among patients with neither prior ipsilateral stone surgery nor preoperative stent, preoperative tamsulosin facilitated passage of a 16Fr ureteral access sheath (OR 2.750, p=0.034)., Conclusions: Ureteral access sheath associated ureteral injury can be averted by limiting the insertion force to ≤6 N. Prior stone surgery, preoperative indwelling ureteral stent plus oral tamsulosin, and recently treated bacteriuria favored passage of a 16Fr ureteral access sheath. In the naïve, unstented patient, preoperative tamsulosin favored deployment of a 16Fr ureteral access sheath.