Search

This article introduces a novel method to estimate the coherence of ultrasound channel data from beamformed radio frequency (RF) data. Estimates of ultrasound channel data are obtained by spatially filtering acquired RF data in the frequency domain. The frequency response of the spatial filters yields outputs similar to frequency domain representations of individual channel signals. This technique performs multiple normalized cross-correlations from the outputs of multiple spatial filters. The coefficients are summed together for each pixel in the coherence-based image. Simulation results using a 64 element 2.5-MHz phased array showed an improvement in contrast-to-noise ratio (CNR) of 67%–93% and a 125%–183% improvement in speckle signal-to-noise ratio (SNR) compared with standard beamformed data. Experimental CNR using a tissue-mimicking phantom showed improvement of 43%–58%, and experimentalSNR improvement was 23%–154%. Comparisons to a previously coherence method, short-lag spatial coherence, are also presented. Preliminary in vivo images of the heart and gall bladder are also shown. This method improves CNR enabling improved visualization of anechoic regions such as cyst and blood vessels. [ABSTRACT FROM AUTHOR]

Analyzing and understanding the movement of the mitral valve is of vital importance in cardiology, as the treatment and prevention of several serious heart diseases depend on it. Unfortunately, large amounts of noise as well as a highly varying image quality make the automatic tracking and segmentation of the mitral valve in two-dimensional echocardiographic videos challenging. In this paper, we present a fully automatic and unsupervised method for segmentation of the mitral valve in two-dimensional echocardiographic videos, independently of the echocardiographic view. We propose a bias-free variant of the robust non-negative matrix factorization (RNMF) along with a window-based localization approach, that is able to identify the mitral valve in several challenging situations. We improve the average f1-score on our dataset of 10 echocardiographic videos by 0.18 to a f1-score of 0.56. [ABSTRACT FROM AUTHOR]

Low-cost ultrasound imaging systems are desired for many applications outside of radiology and cardiology departments. By making ultrasound systems smaller and lower cost, the use of ultrasound has spread from these mainstays to other areas of the hospital such as emergency departments and critical care. To further miniaturize and reduce the cost of ultrasound systems, we have investigated novel Fresnel-based beamforming methods to reduce front-end hardware requirements. Previous studies with linear and curvilinear arrays demonstrated comparable imaging performance using Fresnel-based beamforming versus delay-and-sum (DAS) beamforming. In this work, we extend Fresnel-based beamforming to phased arrays with beam steering. To accomplish this in transmit mode, we introduce a technique called a gated transmit beamformer where multicycle bursts are gated using multiplexers. In receive mode, a 64-element 2.5-MHz phased array is broken up into four 16-element subapertures, and each subaperture performs Fresnel beamforming before a final beamforming step is done. Timing errors are inevitable with Fresnel-based beamforming leading to higher sidelobe and clutter levels. To suppress sidelobe and clutter contributions, we also combine this with our previous technique, dual apodization with cross correlation (DAX) to improve contrast. Field II simulations are performed to evaluate spatial resolution and contrast-to-noise ratio and compared to standard DAS beamforming. Fresnel-based and gated transmit beamforming is also implemented using synthetic aperture data from tissue-mimicking phantoms. Lastly, a hardware proof-of-concept (PoC) Fresnel beamformer was designed, assembled, and evaluated with images from tissue-mimicking phantoms and initial in vivo images. [ABSTRACT FROM AUTHOR]

While medical ultrasound imaging has become one of the most widely used imaging modalities in clinics, it often suffers from suboptimal image quality, especially in technically difficult patients with a large amount of fat content that induces severe phase aberration effects and decreases the signal-to-noise ratio. Several researchers have proposed various techniques, which can be broadly categorized as either a phase aberration correction (PAC) technique or a coherence-based imaging technique, to address the challenges in imaging technically difficult patients. Although both families of techniques have shown some success in improving the image quality in the presence of a mild level of phase aberration and/or random noise, they often fail to achieve meaningful improvements in the image quality and, in some cases, even create severe image artifacts. In this paper, we employ an adaptive filtering technique called frequency-space prediction filtering (FXPF), which we recently introduced in ultrasound imaging, to overcome the weaknesses of existing techniques and achieve image quality improvements more effectively under varying levels of phase aberration and random noise. Using simulated and experimental phantom data with varying levels of phase aberration and random noise, we evaluate and compare the performance of FXPF with the most representative technique for each category: nearest-neighbor cross correlation (NNCC)-based PAC and the generalized coherence factor (GCF). Our simulation, experimental phantom, and in vivo results demonstrate that FXPF is highly robust in varying levels of phase aberration and noise, and always outperforms both NNCC-based PAC and GCF in terms of the contrast-to-noise ratio (CNR) and the contrast when both random noise and phase aberration are present. [ABSTRACT FROM AUTHOR]

Despite numerous recent advances in medical ultrasound imaging, reverberation clutter from near-field anatomical structures, such as the abdominal wall, ribs, and tissue layers, is one of the major sources of ultrasound image quality degradation. Reverberation clutter signals are undesirable echoes, which arise as a result of multiple reflections of acoustic waves between the boundaries of these structures, and cause fill-in to lower image contrast. In order to mitigate the undesirable reverberation clutter effects, we present, in this paper, a new beamforming technique called multiphase apodization with cross correlation (MPAX), which is an improved version of our previous technique, dual apodization with cross correlation (DAX). While DAX uses a single pair of complementary amplitude apodizations, MPAX utilizes multiple pairs of complementary sinusoidal phase apodizations to intentionally introduce grating lobes from which an improved weighting matrix can be produced to effectively suppress reverberation clutter. Our experimental sponge phantom and preliminary in vivo results from human subjects presented in this paper suggest that MPAX is a highly effective technique in suppressing reverberation clutter and has great potential for producing high contrast ultrasound images for more accurate diagnosis in clinics. [ABSTRACT FROM AUTHOR]

High-frequency (HF) ultrasound imaging has been shown to be useful for non-invasively imaging anatomical structures of the eye and small animals in biological and pharmaceutical research, achieving superior spatial resolution. Cardiovascular research utilizing mice requires not only realtime B-scan imaging, but also ultrasound Doppler to evaluate both anatomy and blood flow of the mouse heart. This paper reports the development of an HF ultrasound duplex imaging system capable of both B-mode imaging and Doppler flow measurements, using a 64-element linear array. The system included an HF pulsed-wave Doppler module, a 32-channel HF B-mode imaging module, a PC with a 200 MS/s 14-bit A/D card, and real-time LabView software. A 50 dB SNR and a depth of penetration of larger than 12 mm were achieved using a 35-MHz linear array with 50 µm pitch. The two-way beam widths were determined to be 165 to 260 µm and the clutter-energy- to-total-energy ratio (CTR) were 9.1 to 12 dB when the array was electronically focused at different focal points at depths from 4.8 to 9.6 mm. The system is capable of acquiring real-time B-mode images at a rate greater than 400 frames per second (fps) for a 4.8 x 13 mm field of view, using a 30- MHz 64-element linear array with 100 µm pitch. Sample in vivo cardiac high frame rate images and duplex images of mouse hearts are shown to assess its current imaging capability and performance for small animals. [ABSTRACT FROM AUTHOR]

For real-time visualization of the mouse heart (6 to 13 beats per second), a back-end processing system involving high-speed signal processing functions to form and display images has been developed. This back-end system was designed with new signal processing algorithms to achieve a frame rate of more than 400 images per second. These algorithms were implemented in a simple and cost-effective manner with a single field-programmable gate array (FPGA) and software programs written in C++. The operating speed of the back-end system was investigated by recording the time required for transferring an image to a personal computer. Experimental results showed that the back-end system is capable of producing 433 images per second. To evaluate the imaging performance of the back-end system, a complete imaging system was built. This imaging system, which consisted of a recently reported high-speed mechanical sector scanner assembled with the back-end system, was tested by imaging a wire phantom, a pig eye (in vitro), and a mouse heart (in vivo). It was shown that this system is capable of providing high spatial resolution images with fast temporal resolution. [ABSTRACT FROM AUTHOR]

We report the development of a high-frequency (30-50 MHz), real-time ultrasonic imaging system for cardiac imaging in mice. This system is capable of producing images at 130 frames per second (fps) with a spatial resolution of less than 50 µm. A novel mechanical sector probe was developed that utilizes a magnetic drive mechanism and custom-built servo controller for high speed and accuracy. Additionally, a very light-weight (<0.28 g), single-element transducer was constructed and used to reduce the mass load on the motor. The imaging electronics were triggered according to the angular position of the transducer in order to compensate for the varying speed of the sector motor. This strategy ensured the production of equally spaced scan lines with minimal jitter. Wire phantom testing showed that the system axial and lateral resolutions were 48 µm and 72 µm, respectively. In vivo experiments showed that high-frequency ultrasonic imaging at 130 fps is capable of showing a detailed depiction of a beating mouse heart. [ABSTRACT FROM AUTHOR]

A design of a low-cost bipolar pulse generator for high-frequency (HF) ultrasound applications is presented. The pulse generator can produce N cycle (1–255 cycles) bipolar pulses with center frequency over 60 MHz. The measured pulse amplitude was over 160 Vpp, and the pulse ringing was less than 0.3 Vpp (i.e., signal-to-ring ratio is 55 dB). The pulser can be used in high-frequency ultrasound Doppler and B-mode imaging applications with arrays. [ABSTRACT FROM AUTHOR]

A two-dimensional (2-D) array of 256 × 256 65,536 elements, with total area 4 × 4 = 16 cm², serves as a flexible platform for developing acquisition schemes for 3-D rectilinear ultrasound imaging at 10 MHz using synthetic aperture techniques. This innovative system combines a simplified interconnect scheme and synthetic aperture techniques with a 2-D array for 3-D imaging. A row-column addressing scheme is used to access different elements for different transmit events. This addressing scheme is achieved through a simple interconnect, consisting of one top, one bottom single-layer, flex circuits that, compared to multilayer flex circuits, are simpler to design, cheaper to manufactures and thinner so their effect on the acoustic response is minimized. We present three designs that prioritize different design objectives: volume acquisiton time, resolution, and sensitivity, while maintaining acceptable figures for the other design objectives. For example, one design overlooks time-acquisition requirements, assumes good noise conditions, and optimizes for resolution, achieving -6 dB and -20 dB beamwidths of less than 0.2 and 0.5 mm, respectively, for an F/2 aperture. Another design can acquire an entire volume in 256 transmit events, with -6 dB and -20 dB beamwidths in the order of 0.4 and 0.8 mm, respectively. [ABSTRACT FROM AUTHOR]

A real-time digital beamformer for high-frequency (> 20 MHz) linear ultrasonic arrays has been developed. The system can handle up to 64-element linear array transducers and excite 16 channels and receive simultaneously at 100 MHz sampling frequency with 8-bit precision. Radio frequency (RF) signals are digitized, delayed, and summed through a real-time digital beamformer, which is implemented using a field programmable gate array (FPGA). Using fractional delay filters, fine delays as small as 2 ns can be implemented. A frame rate of 30 frames per second is achieved. Wire phantom (20 μm tungsten) images were obtained and -6 dB axial and lateral widths were measured. The results showed that, using a 30 MHz, 48-element array with a pitch of 100 μm produced a -6 dB width of 68 μm in the axial and 370 μm in the lateral direction at 6.4 mm range. Images from an excised rabbit eye sample also were acquired, and fine anatomical structures, such as the cornea and lens, were resolved. [ABSTRACT FROM AUTHOR]

In previous work, we developed two generations of a real-time rectilinear volumetric scanner operating at 5 MHz for abdominal, breast, or vascular imaging using a Mills cross two-dimensional (2-D) array and a rectilinear periodic 2-D array. To improve spatial resolution performance and sensitivity, we developed a new design using 4:1 receive mode multiplexing. With 4:1 multiplexing, the new 65,000 element 2-D array has 4 × 256 = 1024 receivers so that 256 receivers can be used on any image line. The two major benefits of using receive mode multiplexing are an increase in receive sensitivity due to a greater number of receive elements, and a decrease in grating lobe and clutter levels due to increased receive element density. Theoretical simulations and analysis show an increase of about 13 dB in sensitivity compared to our previous work. With these encouraging results, a new 65,000 element 5-MHz, 2-D array having 1024 receivers and 169 transmitters was prototyped. In addition, the multiplexer and control circuitry were designed, built, and interfaced with both the transducer and volumetric scanner. Images of tissue-mimicking phantoms and in vivo targets were obtained. Using a spherical cyst phantom, experimental results showed a +12 dB improvement in signal-to-noise ratio and +6 dB improvement in contrast compared to our previous work. [ABSTRACT FROM AUTHOR]

Presents information on a study which investigated several sparse two-dimensional (2-D) arrays for real time rectilinear volumetric imaging. Methods used; Results; Discussion.