Search

Fast-growing Eucalyptus spp. forest plantations and their resultant wood products are economically important and may provide a low-cost means to sequester carbon for greenhouse gas reduction. The development of advanced and optimized frameworks for estimating forest plantation attributes from lidar remote sensing data combined with statistical modeling approaches is a step towards forest inventory operationalization and might improve industry efficiency in monitoring and managing forest resources. In this study, we first developed and tested a framework for modeling individual tree attributes in fast-growing Eucalyptus forest plantation using airborne lidar data and linear mixed-effect models (LME) and assessed the gain in accuracy compared to a conventional linear fixed-effects model (LFE). Second, we evaluated the potential of using the tree-level estimates for determining tree attribute uniformity across different stand ages. In the field, tree measurements, such as tree geolocation, species, genotype, age, height (Ht), and diameter at breast height (dbh) were collected through conventional forest inventory practices, and tree-level aboveground carbon (AGC) was estimated using allometric equations. Individual trees were detected and delineated from lidar-derived canopy height models (CHM), and crown-level metrics (e.g., crown volume and crown projected area) were computed from the lidar 3-D point cloud. Field and lidar-derived crown metrics were combined for ht, dbh, and AGC modeling using an LME. We fitted a varying intercept and slope model, setting species, genotype, and stand (alone and nested) as random effects. For comparison, we also modeled the same attributes using a conventional LFE model. The tree attribute estimates derived from the best LME model were used for assessing forest uniformity at the tree level using the Lorenz curves and Gini coefficient (GC). We successfully detected 96.6% of the trees from the lidar-derived CHM. The best LME model for estimating the tree attributes was composed of the stand as a random effect variable, and canopy height, crown volume, and crown projected area as fixed effects. The %RMSE values for tree-level height, dbh, and AGC were 8.9%, 12.1%, and 23.7% for the LFE model and improved to 7.3%, 7.1%, and 13.6%, respectively, for the LME model. Tree attributes uniformity was assessed with the Lorenz curves and tree-level estimations, especially for the older stands. All stands showed a high level of tree uniformity with GC values approximately 0.2. This study demonstrates that accurate detection of individual trees and their associated crown metrics can be used to estimate Ht, dbh, and AGC stocks as well as forest uniformity in fast-growing Eucalyptus plantations forests using lidar data as inputs to LME models. This further underscores the high potential of our proposed approach to monitor standing stock and growth in Eucalyptus—and similar forest plantations for carbon dynamics and forest product planning. [ABSTRACT FROM AUTHOR]

Forest plantations are globally important for the economy and are significant for carbon sequestration. Properly managing plantations requires accurate information about stand timber stocks. In this study, we used the area (ABA) and individual tree (ITD) based approaches for estimating stem volume in fast-growing Eucalyptus spp forest plantations. Herein, we propose a new method to improve individual tree detection (ITD) in dense canopy homogeneous forests and assess the effects of stand age, slope and scan angle on ITD accuracy. Field and Light Detection and Ranging (LiDAR) data were collected in Eucalyptus urophylla x Eucalyptus grandis even-aged forest stands located in the mountainous region of the Rio Doce Valley, southeastern Brazil. We tested five methods to estimate volume from LiDAR-derived metrics using ABA: Artificial Neural Network (ANN), Random Forest (RF), Support Vector Machine (SVM), and linear and Gompertz models. LiDAR-derived canopy metrics were selected using the Recursive Feature Elimination algorithm and Spearman's correlation, for nonparametric and parametric methods, respectively. For the ITD, we tested three ITD methods: two local maxima filters and the watershed method. All methods were tested adding our proposed procedure of Tree Buffer Exclusion (TBE), resulting in 35 possibilities for treetop detection. Stem volume for this approach was estimated using the Schumacher and Hall model. Estimated volumes in both ABA and ITD approaches were compared to the field observed values using the F-test. Overall, the ABA with ANN was found to be better for stand volume estimation ( r y y ^ = 0.95 and RMSE = 14.4%). Although the ITD results showed similar precision ( r y y ^ = 0.94 and RMSE = 16.4%) to the ABA, the results underestimated stem volume in younger stands and in gently sloping terrain (<25%). Stem volume maps also differed between the approaches; ITD represented the stand variability better. In addition, we discuss the importance of LiDAR metrics as input variables for stem volume estimation methods and the possible issues related to the ABA and ITD performance. [ABSTRACT FROM AUTHOR]

Light Detection and Ranging (LiDAR) remote sensing has been established as one of the most promising tools for large-scale forest monitoring and mapping. Continuous advances in computational techniques, such as machine learning algorithms, have been increasingly improving our capability to model forest attributes accurately and at high spatial and temporal resolution. While there have been previous studies exploring the use of LiDAR and machine learning algorithms for forest inventory modeling, as yet, no studies have demonstrated the combined impact of sample size and different modeling techniques for predicting and mapping stem total volume in industrial Eucalyptus spp. tree plantations. This study aimed to compare the combined effects of parametric and nonparametric modeling methods for estimating volume in Eucalyptus spp. tree plantation using airborne LiDAR data while varying the reference data (sample size). The modeling techniques were compared in terms of root mean square error (RMSE), bias, and R2 with 500 simulations. The best performance was verified for the ordinary least-squares (OLS) method, which was able to provide comparable results to the traditional forest inventory approaches using only 40% (n = 63; ~0.04 plots/ha) of the total field plots, followed by the random forest (RF) algorithm with identical sample size values. This study provides solutions for increasing the industry efficiency in monitoring and managing forest plantation stem volume for the paper and pulp supply chain. [ABSTRACT FROM AUTHOR]

Accurate forest parameters are essential for forest inventory. Traditionally, parameters such as diameter at breast height (DBH) and total height are measured in the field by level gauges and hypsometers. However, field inventories are usually based on sample plots, which, despite providing valuable and necessary information, are laborious, expensive, and spatially limited. Most of the work developed for remote measurement of DBH has used terrestrial laser scanning (TLS), which has high density point clouds, being an advantage for the accurate forest inventory. However, TLS still has a spatial limitation to application because it needs to be manually carried to reach the area of interest, requires sometimes challenging field access, and often requires a field team. UAV-borne (unmanned aerial vehicle) lidar has great potential to measure DBH as it provides much higher density point cloud data as compared to aircraft-borne systems. Here, we explore the potential of a UAV-lidar system (GatorEye) to measure individual-tree DBH and total height using an automatic approach in an integrated crop-livestock-forest system with seminal forest plantations of Eucalyptus benthamii. A total of 63 trees were georeferenced and had their DBH and total height measured in the field. In the high-density (>1400 points per meter squared) UAV-lidar point cloud, we applied algorithms (usually used for TLS) for individual tree detection and direct measurement of tree height and DBH. The correlation coefficients (r) between the field-observed and UAV lidar-derived measurements were 0.77 and 0.91 for DBH and total tree height, respectively. The corresponding root mean square errors (RMSE) were 11.3% and 7.9%, respectively. UAV-lidar systems have the potential for measuring relatively broad-scale (thousands of hectares) forest plantations, reducing field effort, and providing an important tool to aid decision making for efficient forest management. We recommend that this potential be explored in other tree plantations and forest environments. [ABSTRACT FROM AUTHOR]

• High Individual Tree Detection (ITD) accuracy is possible for coconut trees using Local Maxima algorithm based techniques. • Adaptive Tree Window Size (TWS) approach as a function of lidar-derived canopy cover can enhance tree detection accuracy. • ITD-derived tree heights provide an opportunity to investigate the level of homogeneity existing at plot levels. Forest inventory and monitoring is indispensable for coconut (Cocos nucifera L.) forest plantation owners as it allows them in assessing tree growth, fruit production rates and vitality of plantations, as well as assists to meet up with the rising market demands by ensuring better yields. Nonetheless, the use of remote sensing techniques for optimizing the management and production of coconut plantations is still at a latent stage. In this paper, we present an airborne laser scanning (lidar) based tree detection method applied for automatically identifying individual coconut trees in a plantation in southeast Brazil. This method locates individual trees by searching treetops on canopy height models (CHM) derived from lidar data through a moving window having fixed treetop window size (TWS). Here, an adaptive TWS approach was implemented as a function of lidar-derived canopy cover (COV, %) along with additional smoothening window sizes (SWS) for enhancing tree detection accuracy. A total of 19 plots characterized by varying levels of canopy cover were used for testing the accuracy of our framework and we were able to obtain an average tree detection accuracy of 86.22%. From a total of 341 trees, 294 trees were detected correctly by the algorithm using adaptive TWS. A low TWS (3x3) value was found to perform best in study plots having COV > 80% and for rest of the cases, a higher TWS (7x7) was perceived suitable. Results were further analyzed and compared, to evaluate the relationship of Individual Tree Detection (ITD) accuracy with varying canopy cover levels, within-plot tree distribution patterns, TWS and SWS values. Proceedings from our work show that appropriate combination of lidar-derived CHMs, local maxima (LM) algorithm and window sizes have the potential to satisfactorily (F-score ˜ 0.90) detect plantation species having irregular canopies such as coconut trees. As an extension of the ITD, estimation of forest uniformity, which gives a measure of the level of homogeneity or heterogeneity of stands, is also performed. [ABSTRACT FROM AUTHOR]