Search

BACKGROUND: The mechanisms underlying heat stroke (HS)-induced hippocampal injury remain unclear. This study aimed to evaluate the HS-induced metabonomics of hippocampal and cerebellar transmitters. METHODS: The HS model was established with male Sprague-Dawley rats subjected to heat exposure of up to 42 °C at a humidity of (55.0±5.0)%. The hippocampal and cerebellar transmitters and metabolites of rats were tested via ultra-high-performance liquid chromatography--mass spectrometry (UPLC-MS/MS). The primary transmitters and metabolites were identified by principal component analysis (PCA) and orthogonal partial least square-discriminant analysis (OPLS-DA). The major metabolic pathways for HS were selected after enrichment. The brain injury was evaluated by histological tests. RESULTS: HS induced hippocampal and cerebellar injuries in rats. HS upregulated the protein levels of hippocampal glutamate, glutamine, gamma-aminobutyric acid, L-tryptophan (Trp), 5-hydroxy-indoleacetic acid, and kynurenine; however, it downregulated asparagine, tryptamine, 5-hydroxytryptophan, melatonin, 3,4-dihydroxyphenylalanine (L-DOPA), and vanillylmandelic acid. HS also sharply elevated the protein levels of cerebellar methionine and Trp, and decreased the levels of serotonin, L-alanine, L-asparagine, L-aspartate, cysteine, norepinephrine, spermine, spermidine, and tyrosine. Hippocampal glutamate, monoamine transmitters, cerebellar aspartate acid, and catecholamine transmitters' metabolic pathways were identified as the main metablic pathways in HS. CONCLUSION: The hippocampus and cerebellum were injured in rats with HS, possibly induced the disorder of hippocampal glutamate and serotonin metabolism, cerebellar aspartate acid and catecholamine transmitter metabolism, and related metabolic pathways. [ABSTRACT FROM AUTHOR]

Though the market of HDR displays for consumers is gaining maturity, low dynamic range (LDR) displays still hold a majority share in the consumer market. Many tone-mapping operators (TMO) have been developed to convert the HDR contents into a form suitable for LDR displays. This work proposes a generic tone-mapping operator (GiTMO) that can represent all global TMOs in a generic form of a one-dimensional array of a few coefficients. We use these coefficients and the existing HDR10 delivery pipeline to produce a tone-mapped version of the HDR content at the receiver end in real time. In our framework, coefficients are sent to the receiver as supplemental enhancement information (SEI) message of High Efficiency Video Coding (HEVC). Thus, HDR10, which is designed for HDR display, becomes compatible with LDR displays too. This can relieve the content producers from the need to release separate copies of HDR and LDR content. GiTMO, being generic and efficient, can generate LDR faithfully for all global TMOs, making the consumer end oblivious of the TMO used at the transmitter side. We perform extensive evaluations to validate the accuracy and efficiency of the GiTMO and the proposed content delivery format, and their benefits over the existing approaches. [ABSTRACT FROM AUTHOR]

A power line communication (PLC) solution to provide a data link between two or more dc–dc power converters is proposed. The approach does not require additional analog circuitry or high-sample-rate analog-to-digital converters to be added on top of the original system. A modulation and signal injection method for the transmitter, and a sampling and demodulation strategy for the receiver are developed. The PLC frequency band is placed between the control loop cutoff frequency and the power electronics circuit cutoff frequency, in a region that we identify as the “intermediate frequency band”. The transmitter modulates the converter voltage or current output by injecting perturbations into the control loop at the input to the PWM unit. To tolerate unsynchronized transmitter and receiver clocks, a virtual zero-crossing location algorithm is combined with long/short pulse identification to achieve demodulation at the receiver. The solution is verified experimentally and achieves reliable bidirectional PLC communication at 2 kb/s with an 8 kHz receiver sampling frequency. [ABSTRACT FROM AUTHOR]

In this article, a subharmonics switching technique named bifrequency pulse train (BF-PT) control for wireless battery charging system with tapped transmitter (Tx) winding is proposed to regulate the output power against the variation of load and coupling coefficient. The tapped Tx winding is spilt into two subwindings: subwinding I is connected to the inverter while subwinding II is in open circuit. The charging current and charging voltage can be acquired by measuring the induced current of subwinding I and the induced voltage of subwinding II, respectively, without dual-side communication. BF-PT control, which contains high- and low-frequency pulse trains, can achieve zero voltage switching over a wide operating range. The high- and low-frequency pulse trains are uniformly distributed to suppress the winding current oscillation and to minimize the output voltage ripple. When the coupling becomes weaker and/or light-load conditions, the switches are operated at the subharmonics frequency to further reduce the average switching frequency of the system. To verify the validity of the proposed method, a wireless charging system with 72 V/3 A output is fabricated. The experimental results confirmed that the proposed method is able to maintain constant current and constant voltage output regardless of the load and coupling variations. [ABSTRACT FROM AUTHOR]

The topological interference management (TIM) problem refers to the study of the $K$ -user partially connected interference networks with no channel state information at the transmitters (CSIT), except for the knowledge of network topology. In this paper, we study the TIM problem with confidential messages (TIM-CM), where message confidentiality must be satisfied in addition to reliability constraints. In particular, each transmitted message must be decodable at its intended receiver and remain confidential at the remaining $(K-1)$ receivers. Our main contribution is to present a comprehensive set of results for the TIM-CM problem by studying the symmetric secure degrees of freedom (SDoF). To this end, we first characterize necessary and sufficient conditions for feasibility of positive symmetric SDoF for any arbitrary topology. We next present two achievable schemes for the TIM-CM problem: For the first scheme, we use the concept of secure partition and, for the second one, we use the concept of secure independent sets. We also present outer bounds on symmetric SDoF for any arbitrary network topology. Using these bounds, we characterize the optimal symmetric SDoF of all $K=2$ -user and $K=3$ -user network topologies. [ABSTRACT FROM AUTHOR]

An online shaping technique for high performance communication over Gaussian channels with Inter-Symbol Interference (ISI) and receiver Analog to Digital Converter (ADC) noise is presented. The technique uses online transmitter precoding over Pulse Amplitude Modulation (PAM) constellation, designed to shape the symbols distribution so that peak power constraint at the channel output is satisfied. An iterative decoder shares information between a modified M-BCJR module, which computes online the trellis transition probabilities of the shaped distribution, and turbo decoder. The result is a reduction in the required Effective Number Of Bits (ENOB) of the receiver ADC. We show that the transmitter precoding performs channel equalization without using any filter. At the limit of very high Signal to Noise Ratio (SNR) a complete channel inversion is possible so that the receiver signal spectrum becomes almost flat. Theoretical bounds are analytically derived which enable to assess the possible gain using the proposed method. For data rates of 200 Gbps and 400 Gbps over printed circuit board, simulations show that the shaping scheme enables reduction in the ENOB requirement as high as 1.43 bit and 1.78 bit, respectively, compared to uniform 4-PAM transmission with turbo equalization at the receiver side. [ABSTRACT FROM AUTHOR]

This article presents a spatial–temporal single harmonic switching (STHS) transmitter array architecture with enhanced efficiency in the power back-off (PBO) region. STHS is an electromagnetic circuit co-designed and jointly optimized transmitter array that realizes beamforming and back-off power generation at the same time. The temporal dimension is originally added in STHS to achieve back-off efficiency enhancement, which can be combined with conventional PBO enhancement methods such as Doherty amplifiers and envelope tracking. The design is validated through a simulation of a two-stage power amplifier (PA) in 65-nm CMOS at 77 GHz, which achieves a peak drain efficiency (DE) of 24.2%, a 22% DE at 3 dB PBO, 16% DE at 6 dB PBO, and 10.2% at 9 dB PBO. The efficiency exhibits a 57% improvement at 3 dB PBO, 100% improvement at 6 dB PBO, and 190% improvement at 9 dB PBO compared with class A/B amplifiers. [ABSTRACT FROM AUTHOR]

External attachment of electronic tags has been increasingly used in fish studies. Many researchers have used ad hoc attachment methods and provided little or no validation for the assumption that tagging itself does not bias animal behaviour or survival. The authors compared six previously published methods for externally attaching acoustic transmitters to fish in a tank holding experiment with black sea bass Centropristis striata (L.). They tracked tag retention, fish growth and external trauma (as a measure of fish welfare) for 60 days. For each of these metrics, the results showed a wide range of responses among tagging treatments. A simple attachment method using a spaghetti tag passed through the dorsal musculature of the fish and tied to the end cap of the transmitter emerged as the preferred option based on high retention, no impact on growth and relatively low detriment to fish welfare. Future field studies using external electronic tagging should consider tag‐related effects that could compromise results when selecting a method for tag attachment. [ABSTRACT FROM AUTHOR]

To ensure the effectiveness of the inductive power transfer (IPT) systems for high-power applications, multiple coils are being used. However, cross couplings among the same-side coils reduce the efficiency of the system. Thus, decoupling coils are commonly used to mitigate the same-side couplings in a multiple-transmitter and multiple-receiver system. The decoupling coils are either used outside of the main coils or concentric with the main coils. In both cases, these decoupling coils do not take part in the power transmission and have some adverse effects on the system performance. In this article, a new IPT system with dual transmitters and dual receivers with integrated decoupling coils is introduced. Besides mitigating the mutual inductances of the same-side coils, the proposed decoupling coils are also taking part in power transmission. In addition, the proposed coils also have good misalignment performance. A 3-D finite-element analysis tool ANSYS MAXWELL is used to investigate the proposed magnetic coupler. A scaled-down experimental setup is used to verify the feasibility of the proposed structure. The maximum dc–dc efficiency of this system is 93.14% while delivering 700 W to the load with a 200-mm air gap. Besides, zero-voltage switching is also achieved in the experiment, which suggests that the proposed system can be an effective solution for the current drawbacks of the multiple-transmitter and multiple-receiver system. [ABSTRACT FROM AUTHOR]

This article proposes a free-positioning omnidirectional wireless power transfer (WPT) system with a reticulated planar transmitter, which enables multiple receivers to be powered simultaneously in arbitrary positions and orientations. The reticulated planar transmitter is equipped with four interleaved and overlapped meander coils, thus, a three-dimensional (3-D) rotating magnetic field is generated with the designed excitation current. Therefore, only a planar single-coil (such as a loop-type coil) is required to realize free-positioning omnidirectional WPT. According to the theoretical modeling of the magnetic field, the excitation current that can generate a 3-D rotating magnetic field is given. To obtain a uniform and strong magnetic field distribution, the transmitter grid width is optimized. Furthermore, an excitation current modulation strategy based on phase-shift control is presented to regulate the amplitude of the excitation current. The experimental results show that the output power is greater than 13.1 W no matter how the center of the receiver moves or rotates freely within 400 × 400 mm. When five receivers are powered simultaneously in different positions and orientations, 82.5 W total output power and 55.6% efficiency can be achieved. The experimental results demonstrate that free-positioning omnidirectional WPT can be realized with only planar single-coil receivers by using the proposed reticulated planar transmitter and its excitation current modulation strategy. [ABSTRACT FROM AUTHOR]

We study communication in the presence of a jamming adversary where quadratic power constraints are imposed on the transmitter and the jammer. The jamming signal is allowed to be a function of the codebook, and a noncausal but noisy observation of the transmitted codeword. For a certain range of the noise-to-signal ratios (NSRs) of the transmitter and the jammer, we are able to characterize the capacity of this channel under deterministic encoding or stochastic encoding, i.e., with no common randomness between the encoder/decoder pair. For the remaining NSR regimes, we determine the capacity under the assumption of a small amount of common randomness (at most $2\log (n)$ bits in one sub-regime, and at most $\Omega ({n})$ bits in the other sub-regime) available to the encoder-decoder pair. Our proof techniques involve a novel myopic list-decoding result for achievability, and a Plotkin-type push attack for the converse in a subregion of the NSRs, both of which may be of independent interest. We also give bounds on the strong secrecy capacity of this channel assuming that the jammer is simultaneously eavesdropping. [ABSTRACT FROM AUTHOR]

We consider the problem of covert communication over a state-dependent channel when the Channel State Information (CSI) is available either non-causally, causally, or strictly causally, either at the transmitter alone, or at both transmitter and receiver. Covert communication with respect to an adversary, called “warden,” is one in which, despite communication over the channel, the warden’s observation remains indistinguishable from an output induced by innocent channel-input symbols. Covert communication involves fooling an adversary in part by a proliferation of codebooks; for reliable decoding at the legitimate receiver, the codebook uncertainty is typically removed via a shared secret key that is unavailable to the warden. In contrast to previous work, we do not assume the availability of a large shared key at the transmitter and legitimate receiver. Instead, we only require a secret key with negligible rate to bootstrap the communication and our scheme extracts shared randomness from the CSI in a manner that keeps it secret from the warden, despite the influence of the CSI on the warden’s output. When CSI is available at the transmitter and receiver, we derive the covert capacity region. When CSI is only available at the transmitter, we derive inner and outer bounds on the covert capacity. We also provide examples for which the covert capacity is positive with knowledge of CSI but is zero without it. [ABSTRACT FROM AUTHOR]

In this paper, we study a quantized feedback scheme to maximize the goodput of a finite blocklength communication scenario over a quasi-static fading channel. It is assumed that the receiver has perfect channel state information (CSI) and sends back the CSI to the transmitter over a resolution-limited error-free feedback channel. With this partial CSI, the transmitter is supposed to select the optimum transmission rate, such that it maximizes the overall goodput of the communication system. This problem has been studied for the asymptotic blocklength regime, however, no solution has so far been presented for finite blocklength. Here, we study this problem in two cases: with and without constraint on reliability. We first formulate the optimization problems and analytically solve them. Iterative algorithms that successfully exploit the system parameters for both cases are presented. It is shown that although the achievable maximum goodput decreases with shorter blocklengths and higher reliability requirements, significant improvement can be achieved even with coarsely quantized feedback schemes. [ABSTRACT FROM AUTHOR]

This article presents a temperature compensated transmitter for phased-array applications. The high-temperature effects on each individual transmitter building block are studied and compensated to mitigate the performance variations. Furthermore, a new active, tunable, and variable gain phase shifter VGPS) architecture is proposed, which features low-performance variation with temperature and high gain without compromising the phase shift range. A temperature sensor is designed to adaptively adjust the critical dc bias voltages to minimize the variation of the active devices. A class- $\text{F}^{-1}$ power amplifier PA) is designed, as the last stage in the transmitter chain, and its performance variation is compensated through the VGPS stage by adaptively tuning its characteristics. Gallium-nitride (GaN)-on-silicon-carbide (SiC) high-electron-mobility transistors (HEMTs) are adopted as the active devices and a voltage-controlled capacitor (varactor) used in the VGPS stage. The transmitter is prototyped on a piece of Rogers 4003C substrate, and the system performance is measured. The transmitter has the minimum and the maximum small-signal gain of 5.2 and 31.5 dB, respectively, with the maximum variation of < 2.3 dB across the temperature range and the frequency range of 2–2.1 GHz. The insertion phase variation also remains below 6.5° across the phase shift, temperature, and frequency range. The maximum output power and power added efficiency (PAE) are measured to be 33 dBm and 58%, respectively, at the maximum ambient temperature of 220 °C. The measurement results also show that the transmitter is able to transmit 64-QAM signals with the data rate of 120 Mb/s at the maximum ambient temperature of 220 °C. [ABSTRACT FROM AUTHOR]

This article proposes a novel method to train the digital predistortion (DPD) function in a radio frequency (RF) beamforming array using feedback signals acquired from a near-field-based transmitter observation receiver (NF-TOR). Accordingly, the proposed DPD training method relies only on information/signals available at the transmitter side and does not require the deployment of a far-field (FF)-based TOR. The method starts by first identifying the coefficients of the propagation channels between the radiating antennas and the NF probes. These NF channel coefficients are then used to estimate the forward model of each power amplifier in the array and to train the DPD function. Proof-of-concept validation experiments were conduthis article, the complex basebandcted on a 16-element 29-GHz RF beamforming array with four embedded NF probes. When driven by 400-MHz orthogonal frequency-division multiplexing signals with subcarriers modulated using 256-QAM, the DPD trained using the NF-TOR allowed for an improvement in the adjacent channel power ratio and error vector magnitude (EVM) from −29.66 to −40.49 dB and 8.29% to 2.40%, respectively, in the main beam direction. Furthermore, the application of the NF-TOR trained DPD allowed the effective isotropic radiated power to increase from 28.3 to 33.3 dBm while maintaining an EVM below 3.5%. These results, obtained using the proposed NF-TOR training method, are similar to those obtained with a DPD function trained using an FF TOR method. [ABSTRACT FROM AUTHOR]

In this article, an optimized non-uniformly distributed turn (NUDT) coil antenna is proposed to mitigate the lateral misalignment problem in wireless power transfer (WPT) systems. The proposed $ {Q}$ -assisted ${H}$ -field forming technique is analytically implemented using a minimum mean square error (mmse)-based algorithm. This results in an optimized transmitter (Tx) coil with clustered turns achieving a widespread uniformity of the ${H}$ -field in the receiver (Rx) working region. The proposed optimal design shows a consistent mutual inductance and power transfer efficiency (PTE) irrespective of the Rx misalignment which is realized using the circuit parameters. The analytical and simulated results of the proposed Tx coil designed using the $ {Q}$ -assisted mmse-based ${H}$ -field forming technique is experimentally verified. The misalignment tolerance of the proposed antenna is improved over the existing design by 224%. The proposed design proves its advantage to realize misalignment tolerant wireless charging platforms for WPT applications. [ABSTRACT FROM AUTHOR]

In this article, we investigate the impact of correlated fading on the performance of wireless multiple access channels (MAC) in the presence and absence of side information (SI) at transmitters, where the fading coefficients are modeled according to the Fisher-Snedecor $\mathcal {F}$ distribution. Specifically, we represent two scenarios: ($i$) clean MAC (i.e, without SI at transmitters), ($ii$) doubly dirty MAC (i.e., with the non-causally known SI at transmitters). For both system models, we derive the closed-form expressions of the outage probability (OP) as well as the average capacity (AC) under independent fading conditions. Besides, exploiting copula theory, we obtain the exact analytical expressions for the OP and the AC under positive dependence fading conditions in both considered models. Finally, the validity of the analytical results is illustrated numerically. [ABSTRACT FROM AUTHOR]

Because a transmitter-side controller of an inductive power transfer (IPT) system cannot directly measure its load conditions, i.e., receiver-side output voltages and currents, wireless communications are commonly used in many IPT systems. However, the wireless communication can cause a devastating failure of the IPT system because of its tens of milliseconds delays and frequent data losses. The mismatch between the transmitted and the received power can destroy the receiver-side power converters. In this article, receiver-side load voltage and current observers for a series–series tuned IPT system are proposed using the well-known disturbance observer theories. A load current observer that has a 10 kHz estimation bandwidth and a load voltage observer that has a 200 Hz bandwidth are proposed. The estimated load voltage and current have much faster dynamics than the wireless feedback signals without any data loss. Therefore, the proposed observers can bring significant advances in reliability and performance of the IPT system. Design guidelines for the observers that have low steady-state errors and fast dynamics are suggested. The theoretical performances of the proposed observers are evaluated by simulations and experiments. The simulated frequency- and time-domain responses of the proposed observers are consistent with the theoretical results. An experimental testbed was built to evaluate the proposed observers. The estimated current follows its actual value in 0.1 ms and the estimated voltage follows its measured value in 4 ms as expected from the simulations. [ABSTRACT FROM AUTHOR]

In this article, an optimized design for a dual-coupled inductor–capacitor–capacitor-series (LCC-S)-compensated wireless power transfer (WPT) system with zero-phase angle (ZPA) input condition and load-independent constant current (CC) output is presented. To this end, based on the misalignment characteristics of the reversed-series compensation coil structure, a novel design method for determination of the compensation parameters is proposed. By introducing a stability factor, any restriction on the variation correlation of the mutual inductances between the transmitter and receiver coils, and between the compensation and receiver coils within the range of misalignment tolerant design, is eliminated, thereby increasing the degree of freedom in the coil structure. According to a predetermined misalignment tolerant range, the proposed method can limit the fluctuation of the output current within a certain range and maintain the ZPA input condition. A 200-W/85.3-kHz prototype based on the proposed method is implemented and its performance is experimentally validated. The system can operate in ZPA input and load-independent CC output with a misalignment tolerance factor of 4, as the load varies from 5 to 20 $\Omega$. [ABSTRACT FROM AUTHOR]

We show that the problem of code construction for multiple access channel (MAC) resolvability can be reduced to the simpler problem of code construction for source resolvability. Specifically, we propose a MAC resolvability code construction that relies on a combination of multiple source resolvability codes, used in a black-box manner, and leverages randomness recycling implemented via distributed hashing and block-Markov coding. Since explicit source resolvability codes are known, our results also yield the first explicit coding schemes that achieve the entire MAC resolvability region for any discrete memoryless multiple-access channel with binary input alphabets. [ABSTRACT FROM AUTHOR]

In civil or military applications, a transmitter on Earth may utilize different means of communications. A typical example is the naval craft, which often radiates very high frequency signals received by a satellite system and high frequency signals received by land-based observers. This article concentrates on the combination of land-based and satellite-based over-the-horizon (OTH) geolocations. A quadratic constrained weighted least-squares optimization model for the combined geolocation is established and a differentiable exact penalty solution is developed to locate the OTH transmitter in an iterative manner, which is shown to have robust convergence performance. Theoretical analysis is presented, which involves the Cramér–Rao bound for combined geolocation under the constraint of ellipsoidal Earth model and the closed-form expression of mean square error for the proposed method. Numerical examples are provided to validate our theoretical analysis and illustrate that the proposed method outperforms other geolocation methods in a wide range of scenarios. [ABSTRACT FROM AUTHOR]

This article represents a design for a high-power pulse transmitter for high-depth imaging applications. The pulse transmitter consists of an avalanche transistor-based pulse-shaping network, an improved step recovery diode (SRD)-based configuration, and a pulse-shifting circuit with a broadband combiner to generate a first derivative Gaussian pulse for high-power applications. The output pulse of the transistor-based circuit is fed to a balun, which produces two opposite polarity pulses and then feeds two parallel SRD pulse-shaping circuits that produce ultrashort pulses. The SRD-based part of the circuit was developed to have a high amplitude output pulse. Moreover, using a technique based on pulse shifting, a higher power monopulse was achieved without using a balun and a differentiator. This design achieved a monopulse of 169-ps pulsewidth with a peak power of $P =5.78$ W. In order to check the validity of the transmitter for imaging applications, several experiments for buried objects in the sand are conducted, including metal objects, water pipe, rock, and copper veins. All reconstructed 3-D images clearly represent the target shape and dimension, confirming the functionality of the designed transmitter for sensing and imaging applications. [ABSTRACT FROM AUTHOR]

Fully digital transmitters (DTXs) have the potential of replacing analog-intensive transmitter (TX) line-ups in future massive multiple-input and multiple-output (mMIMO) systems since they hold the promise of higher system integration level and energy efficiency. DTX operation so far has been limited to low RF output powers. This article introduces a concept that enables high-power DTX operation. A DTX demonstrator targeting both high output power and high efficiency is realized as a proof of concept. It is based on a custom ${V_{T}}$ -shifted laterally-diffused MOS (LDMOS) technology, which is utilized to implement a segmented high-power output stage operated in class-BE. A low-voltage high-speed 40-nm CMOS controller drives the individual output stage segments at gigahertz rates. Measurements show the promising results for the proposed high-power DTX concept and provide valuable lessons for future DTX implementations. [ABSTRACT FROM AUTHOR]

A multitransmitter (multi-TX) inductive power transfer system would not only offer better spatial freedom but also improve the overall output capability. Under heavy-load condition, it is desirable to fully utilize the output power capability, and the overall input power needs to be balanced among the multiple TXs. This article proposes a simple and low-cost current sharing method to balance the input power. The current distribution is analytically studied for an example two-TX system, and the sharing path is proposed to balance the power under coupling variation and coil inductance mismatch. It also explores the influence of sharing path on the efficiency and zero-phase operation. Besides, the proposed method is valid for other compensations and can be extended for N-TX (N $>$ 2) systems. Finally, a two-TX system is implemented to verify the sharing effect. The current imbalance factor is effectively reduced from 37% to 2.7% under the worst coupling cases. [ABSTRACT FROM AUTHOR]

This article proposes and implements an integrated wireless motor system using the laminated magnetic coupler (LMC) and commutative-resonant control (CRC). Prominently, a unique wireless power transfer system is developed to directly drive the switched reluctance motor (SRM) over an extendable distance with all controls centralizing in the transmitter. Differing from the multifrequency wireless motor system, the proposed system first employs the single resonant frequency to wirelessly drive a multiphase SRM through the single power transfer channel. Particularly, two orthogonal bipolar coils and one unipolar coil are skillfully integrated and naturally decoupled to form an LMC which acts as the transmitter, intermediate, and receiver coils, respectively. By utilizing the CRC to sequentially energize coils in the transmitter, the SRM phase windings can be properly excited by relevant coils in the receiver, which takes the distinct advantages of balanced phase currents, flexible transfer distance, high integration, and free maintenance. A prototype is constructed with the system efficiency of 89.14% and motor speed of 1500 rpm under the distance of 200 mm. Both theoretical and experimental results are provided to validate the feasibility of the proposed system. [ABSTRACT FROM AUTHOR]

In this paper an analytical model is introduced to describe the impulse response of the diffusive channel between a pointwise transmitter and a given fully-absorbing (FA) receiver in a molecular communication (MC) system. The presence of neighbouring FA nanomachines in the environment is taken into account by describing them as sources of negative molecules. The channel impulse responses of all the receivers are linked in a system of integral equations. The solution of the system with two receivers is obtained analytically. For a higher number of receivers the system of integral equations is solved numerically. It is also shown that the channel impulse response shape is distorted by the presence of the neighbouring FA interferers. For instance, there is a time shift of the peak in the number of absorbed molecules compared to the case without interference, as predicted by the proposed model. The analytical derivations are validated by means of particle based simulations. [ABSTRACT FROM AUTHOR]

This article concerns the physical layer security (PLS) problem in distributed antenna systems (DASs), where eavesdroppers are equipped with multiple antennas. If both legitimate transmitter (Alice) and receiver (Bob) broadcast wireless signals via a DAS, the channel state information (CSI) between Alice and Bob may be exposed to an eavesdropper (Eve) due to the broadcast nature of wireless signals. Based on the exposed CSI, Eve can use multiple antennas to improve the eavesdropping capability on the confidential message transmitted from Alice. The prior PLS approaches to defend against the eavesdropping attack have two limitations. The first limitation is to assume that the CSI of Bob is available to Alice. The second limitation is to assume that there is no error in the feedback CSIs. In this article, we propose a new PLS scheme of a DAS by using one-bit feedback information. The basic idea of our approach is to generate a null transmission vector from the distributed transmitters of Alice to Bob while using different artificial noise components to protect the exposure problem of CSI between Alice and Bob. The proposed scheme has the following advantages: improved secrecy rate, rapid convergence, and good performance under a time-varying channel. We implemented our scheme and conducted extensive performance comparisons through simulations. Our experimental results show that the proposed scheme improves the secrecy rate with 1.20 b/s/Hz as compared to prior approaches. At last, we present some interesting future works for the PLS problem in a DAS. [ABSTRACT FROM AUTHOR]

This article proposes and implements a novel wireless power and drive transfer system using orthogonal bipolar couplers and separately excited modulation (SEM). Specifically, two bipolar coils are orthogonally integrated and naturally decoupled to form a compact magnetic coupler which will be utilized in the transmitter and receiver, respectively. The key is to employ the SEM to alternatively energize bipolar coils in the transmitter while self-driven circuits in the receiver can directly extract the drive information to control receiver-side switches. Consequently, the concurrent wireless power transfer and wireless drive transfer can be skillfully realized via the shared transfer channel at the single resonant frequency. Moreover, the proposed system can effortlessly achieve the wireless dc motor drive with the capability of bidirectional motion, or the wireless ac motor drive with the variable-voltage variable-frequency control. Besides driving the dc and ac motors, a 200-W prototype is constructed with the transmission efficiency of 89.5% over the transfer distance of 100 mm for a resistive load of 40 Ω. Both theoretical and experimental results are provided to validate the feasibility and flexibility of the proposed system. [ABSTRACT FROM AUTHOR]

There has been a recent surge in interest for optical satellite communication (SatCom) utilizing lasers. It is clear to see why, as optical SatCom is capable of higher speed, lighter weight, higher directionality, and higher efficiency versus their radio-based counterparts. Research into optical SatCom has focused on devices operating in the short-wave infrared (SWIR), which is due to the maturity and commercial availability of such component’s thanks to significant development in terrestrial telecommunications networks. However, SWIR performs poorly in fog and heavy weather, prompting investigations into longer mid-wave and long-wave infrared bands for optical communication instead due to reduced atmospheric losses. This paper provides a comprehensive review of laser transmitters, detectors, and the science behind selecting longer wavelengths for optical SatCom to boost optical SatCom between ground stations and low earth orbit satellite constellations being deployed. [ABSTRACT FROM AUTHOR]

Geo-localization services are an important functionality in cellular networks. Besides, the use of Ultra Dense Networks and small cells, in current and future cellular networks, greatly increases the complexity of centralized localization approaches. Consequently, we propose a Self-Synchronization Positioning Estimation (SSPE) algorithm that estimates the transmitter position in a distributed fashion. The proposed SSPE algorithm reaches consensus for the posterior distribution of the transmitter position rather than on the final estimates. Such consensus ensures that the proposed SSPE algorithm converges to the centralized Direct Positioning Estimation (DPE) approach, which has the best performance of all localization approaches. We show that the proposed algorithm is related to the Iterative Positioning Estimation (IPE) algorithm, since both exploit the self-synchronization mechanism. As a result, the improvements and extensions for IPE, previously studied in other works, can be directly applied to the proposed SSPE algorithm. In addition, the proposed algorithm is able to localize the transmitter even when it is not time synchronized with the network as it is usually the case. The performance of the algorithms is numerically assessed through Monte-Carlo simulations by the mean distance error and mean range offset error. Finally, we not only show that our approach gets close to the DPE performance after a few iterations, but also that it converges for different logical network configurations. [ABSTRACT FROM AUTHOR]

This article presents a secure communication scheme based on chaotic systems using a sliding-mode observer (SMO) that is robust against disturbances affecting the transmitter and transmission process. The original message is first encrypted using a $N$ -cipher with a key signal and then fed into the state equation, whereas the key signal is fed into the output equation. The chaotic system in the transmitter is re-expressed to decouple the disturbances from the signals of interest. An SMO is then designed based on this form and implemented in the receiver to perform synchronization, and recover the broadcast messages to perform secure communication. The conditions required for the SMO to be feasible are investigated in terms of the transmitter system matrices. A set of design procedures for the chaotic secure communication scheme is outlined. Finally, a simulated example is shown to exhibit the efficacy of the proposed scheme. [ABSTRACT FROM AUTHOR]

In this article, we present a novel digital predistortion (DPD) system which can be updated quickly and efficiently in response to the dynamic reconfiguration of multiuser multiple-input multiple-output (MIMO) transmitters. By identifying the shared properties of different power amplifiers (PAs) with two feature extraction stages, nonlinear behaviors of the PAs are encoded into low-dimensional features. Using the extracted features as input, a novel DPD generator is employed to synthesize DPD model coefficients directly. In this way, when the power levels or beam angles change, the DPD model can be updated fast and accurately without capturing the output data or applying linear system identification algorithms. To capture slow-varying dynamics of the PAs, the features can also be calibrated efficiently in the background. Computational complexity and operational latency can thus be reduced significantly. Simulation and experimental results demonstrate that the proposed DPD approach achieves excellent linearization performance with low complexity, making itself a promising linearization solution for 5G massive MIMO transmitters. [ABSTRACT FROM AUTHOR]

In a dynamic wireless charging (DWC) system, the mutual inductance between the transmitter and receiver coils may vary with the position of the receiver, resulting in a fluctuation of the output voltage. Although a three-phase DWC system can reduce output fluctuation by traveling wave magnetic field, the existing three-phase systems still cannot achieve a uniform output voltage. In order to further improve the output stability, this article analyzes the cause of output voltage fluctuation. The magnetic field generated by the three-phase transmitter coils is decomposed into the fundamental and the harmonic traveling wave magnetic fields for analysis in this article. And a new calculation method of induced voltage is proposed from the perspective of dynamic electromotive force. Then, the voltages induced by the fundamental and the harmonic magnetic fields in the receiver coil are compared, revealing that the fifth and above harmonic magnetic fields are the ultimate cause of the output fluctuation. Subsequently, two fundamental methods to reduce the output fluctuation are proposed, and the effect of the output fluctuation on the efficiency is analyzed. Finally, a prototype was built to verify the correctness of the theoretical analysis and the feasibility of the proposed output fluctuation reduction methods. [ABSTRACT FROM AUTHOR]

This work is focused on the system-level performance of a broadcast network. Since all transmitters in a broadcast network transmit identical signals, received signals from multiple transmitters can be combined to improve system performance. We develop a stochastic geometry-based analytical framework to derive the coverage of a typical receiver. We show that there may exist an optimal connectivity radius that maximizes the rate coverage. Our analysis includes the fact that users may have their individual content/advertisement preferences. We assume that there are multiple classes of users with each user class preferring a particular type of content/advertisements and the users will pay the network only when they can see content aligned with their interest. The operator may choose to transmit multiple contents simultaneously to cater to more users’ interests to increase its revenue. We present revenue models to study the impact of the number of contents on the operator revenue. We consider two scenarios for users’ distribution- one where users’ interest depends on their geographical location and the other where it doesn’t. With the help of numerical results and analysis, we show the impact of various parameters including content granularity, connectivity radius, and rate threshold and present important design insights. [ABSTRACT FROM AUTHOR]

We study private classical communication over quantum multiple-access channels. For an arbitrary number of transmitters, we derive a regularized expression of the capacity region. In the case of degradable channels, we establish a single-letter expression for the best achievable sum-rate and prove that this quantity also corresponds to the best achievable sum-rate for quantum communication over degradable quantum multiple-access channels. In our achievability result, we decouple the reliability and privacy constraints, which are handled via source coding with quantum side information and universal hashing, respectively. Hence, we also establish that the multi-user coding problem under consideration can be handled solely via point-to-point coding techniques. As a by-product of independent interest, we derive a distributed leftover hash lemma against quantum side information that ensures privacy in our achievability result. [ABSTRACT FROM AUTHOR]

In this article, a design of bipolar nonsalient pole (BNSP) transmitter, which originates from motor theory, for high-power EV dynamic wireless power transfer (DWPT) system is proposed. To analyze and evaluate BNSP transmitter in aspect of principle, characteristic, and performance, the existing I-type, S-type, and N-type transmitters in DWPT application are classified as bipolar salient pole (BSP) transmitter, which establishes a reference for comparing. The design parameters and other contrast conditions of BNSP and BSP transmitters are given. Coupling flux and leakage flux of BNSP transmitter are analyzed by comparing the magnetic models and the finite-element models of BNSP and BSP transmitters. Based on the modular design in practical application, the sensitivity of coupling performance to the module gap in BNSP and BSP transmitters is analyzed and compared in simulation. All theoretical results are verified by contrast experiments. The maximum effective mutual inductance of BNSP transmitter is about 31.0% larger than that of BSP transmitter, and the efficiency of the system with output power of 10 kW is 93.5% with BNSP transmitter, about 2.4% higher than that with BSP transmitter. Besides, BNSP transmitter needs 5.9% shorter Litz wire and 53.1% smaller volume of cores, which makes it smaller in size. [ABSTRACT FROM AUTHOR]

The recent development of metasurfaces has motivated their potential use for improving the performance of wireless communication networks by manipulating the propagation environment through nearly passive sub-wavelength scattering elements arranged on a surface. However, most studies of this technology focus on reflective metasurfaces, that is, the surface reflects the incident signals toward receivers located on the same side of the transmitter, which restricts the coverage to one side of the surface. In this article, we introduce the concept of an intelligent omni-surface (IOS), which is able to serve mobile users on both sides of the surface to achieve full-dimensional communications by jointly engineering its reflective and refractive properties. The working principle of the IOS is introduced, and a novel hybrid beamforming scheme is proposed for IOS-based wireless communications. Moreover, we present a prototype of IOS-based wireless communications and report experimental results. Furthermore, potential applications of IOSs to wireless communications together with relevant research challenges are discussed. [ABSTRACT FROM AUTHOR]

Compared to air surroundings, the marine environment is not stable due to the influence of ocean currents and other factors. Misalignments always occur inevitably when autonomous underwater vehicles are charging wirelessly in the docking station. Therefore, misalignment insensitive underwater wireless power transfer system need to be investigated. In this article, a novel hybrid transmitter composed of conical and planar spiral coils is proposed that greatly improves the misalignment tolerance and transfer performance. First, the coil tilt angle theory (CTAT) is presented and verified to determine the optimum tilt angle of conical coil. Then, based on the CTAT, a circular uniform magnetic field zone with a diameter of 30 cm in charging plane can be achieved by flexibly designing the hybrid transmitter. Moreover, a three-dimensional finite-element simulation software is employed to study the eddy current loss under different circumstances. Finally, experimental results show that the proposed transmitter has better performance in output power and power transfer efficiency (PTE) stability within the possible working region compared with conventional transmitters. It has demonstrated that the output power changes only within 5.7% and the PTEs maintain at approximately 86% in excessive misalignment area with transfer distance of 2 cm. [ABSTRACT FROM AUTHOR]

This article proposes a tripolar plane-type (TPT) transmitter enabling three-dimensional (3-D) omnidirectional wireless power transfer (WPT) for consumer electronics, such as mobile phones and tablet computers. The proposed TPT transmitter is a 2-D plan-type structure, but it shows a 3-D omnidirectional power transmitting capability. This structure consists of two crossed bipolar coils and a unipolar circular coil, and the three coils are mutually decoupled naturally. By calculating the magnetic field distribution generated by the TPT transmitter, a 3-D omnidirectional magnetic field can be obtained. Then, a detailed circuit topology based on the inductor-capacitor-capacitor-series compensation networks and full-bridge inverters with phase-shift control is modeled and analyzed. On this base, an excitation current vector modulation strategy based on a targeting magnetic field is designed, which can improve and stabilize the system output power and efficiency. Finally, an experimental prototype is set up to verify the 3-D omnidirectional power transmitting capability of the proposed TPT transmitter and the effectiveness of the designed current vector modulation strategy. Besides, the superiority of the proposed 3-D omnidirectional WPT system is verified by comparison with other methodologies. The experimental results show that the system output power and efficiency are maintained at 61.4–80.6W and 80.7%–85.2% under arbitrary angular misalignment of the receiver. [ABSTRACT FROM AUTHOR]

With the widely applying of inductive power transfer (IPT) sharing platforms in public, the security issue imposed by the leaked electromagnetic field (EMF) of standby transmitters (Txs) becomes one of the concerned topics. Multiple Txs may be an effective scheme to suppress the leaked EMF for which each Tx can be controlled independently. For the traditional technologies, multiple inverters, sensors, or wireless communication links are needed to achieve load detection and independent control, which increases the cost and reduces the system's reliability. This work presents an IPT system with dual secondary loops, which only needs a single inverter and can automatically control the Txs by its circuitry reflective property. The system can enhance the transmitting current when Rx couples with Tx and weaken that when Rx does not couple with Tx. Furthermore, a capacitor array is added in the secondary circuit to adapt different primary reactances by utilizing a simple switching-control method. Finally, a prototype that can transfer 112 W with a dc–dc efficiency of 91.79% is built to validate the feasibility of the proposed system. The experimental results show that the current in coupled Txs is three times higher than that in uncoupled Txs as per the theoretical analysis. [ABSTRACT FROM AUTHOR]

Autonomous underwater vehicle (AUV) is a key mobile node in the ocean observation network. However, the limited endurance capacity and limited cruising range have become the bottlenecks in the wide application of the AUVs. In order to extend cruising range, this article develops a uniform power inductive power transfer (IPT) system for AUVs. A novel magnetic coupler with a low output fluctuation, low weight of receiver and a low space occupation of the AUV is proposed in this article. The proposed magnetic structure employing a quadruple-coil transmitter and a crossed dipole receiver utilizes uniform horizontal magnetic flux to establish stable coupling against rotational and axial misalignment. An IPT circuit topology is designed and analyzed in detail, meanwhile, the phase difference of the excitation currents is optimized to achieve the power and efficiency stability versus misalignments. The proposal is analyzed, established, and tested in this article. The magnetic receiver weighs only 414 g. The results show that the prototype can deliver 964.7 W with a dc–dc efficiency of 90.9%. In the process of rolling dislocation from –20° to 20° and axial dislocation from –30 mm to 30 mm, the maximum fluctuation of output power is 12.1% and 20.2%, respectively. [ABSTRACT FROM AUTHOR]

In this article, we propose an amplitude-shift keying (ASK) modulation technique for Class-E power transmitters used in the inductive power and data transfer links. The proposed modulation circuit consists of a capacitor and a transistor, which switch the load network of the Class-E transmitter between two states; in one state, the drain waveform of the Class-E transistor satisfies both zero-voltage switching (ZVS) and zero-voltage-derivative switching conditions, while in the other one, the waveform approximately satisfies the ZVS condition. Therefore, at both states, the dc-to-ac power conversion efficiency is high, but the transmitted power is different, which allows the implementation of ASK data modulation in the transmitter. We also present an analytical procedure to design the circuit for the desired output power and data modulation index (MI). We have verified the design procedure in both simulation and measurement. The implemented inductive link consists of a 2.4- $\mu$ H transmitter coil and a 1.1- $\mu$ H receiver coil, separated by a 10-mm air gap. With a carrier frequency of 10 MHz, the power transfer efficiency and the power delivered to load were measured to be 64.6% and 35 mW, respectively. With MI = 10%, the bit error rate for the data rates of 1 and 2 Mb/s was measured to be less than 10–8 and 10–6, respectively. [ABSTRACT FROM AUTHOR]

Rate splitting (RS) and wireless edge caching are essential means for meeting the quality of service requirements of future wireless networks. In this work, we focus on the cross-layer co-design of wireless edge caching schemes with sophisticated physical layer techniques, which facilitate non-orthogonal multiple access and interference mitigation. A flexible caching-aided RS (CRS) technique is proposed that operates in various modes that specify the cache placement at the receivers. We consider two caching policies: the intelligent coded caching (CC), as well as the well-known most popular content (MPC) policy. Both caching policies are integrated within the design parameters of RS in order to serve multiple cache-enabled receivers. The proposed technique is investigated from a system level perspective by taking into account spatial randomness. We consider a single cell network consisting of center and edge receivers and provide a comprehensive analytical framework for the evaluation of the proposed technique in terms of achieved rates. Specifically, we derive the rate achieved at each receiver under minimum rate constraints while incorporating the cache placement characteristics. Numerical results are presented which highlight the flexibility of the proposed technique and show how caching can be exploited in order to further boost the performance of RS. [ABSTRACT FROM AUTHOR]

A space-vector (SV) based excitation method for wireless power transfer systems with a bipolar transmitter is introduced in this article. Unlike traditional bipolar excitation techniques that rely on fixed transmitter current distributions, this SV approach provides an elegant analytical method of redistributing a greater magnitude of current to the transmitter coil, which is closer to a misaligned receiver. This method is shown to require a smaller transmitter current vector magnitude for a required output power compared to all other bipolar coil excitation schemes over a broad range of receiver misalignments, thereby reducing conduction losses within the system. Additionally, the gradual redistribution of transmitter current as a function of receiver misalignment achieved by the SV method causes it to be less influenced by errors in receiver position sensing compared to conventional methods. Experimental results shows that the proposed method in conjunction with single coil operation at extreme misalignments was able to achieve a coil efficiency profile with minimal variation due to misalignment (93.2% at perfect alignment to 92.7% at a misalignment of 20 cm, for 2 kW power transfer into a 200 V battery load.) [ABSTRACT FROM AUTHOR]

Coherent processing in cooperative multi-agent networks can achieve significant performance gain via accurate alignment of observed signals. However, the inaccessibility of phase information in mobile scenes prevents the acquisition of a high degree of coherence for target detection. This paper presents a quasi-coherent mobile detection framework for cooperative multi-agent networks, which exploits the phase information inherent in the carrier wave of direct-path signals. Specifically, we derive the quasi-coherent detector with the aid of phase calibration by incorporating the maximum likelihood estimation of phase-related parameters obtained from direct-path signals. Next, we characterize the detection performance degradation induced by the mismatch of initial phase, transmitter position, orientation and clock. We further demonstrate the near-optimal detection capability of the proposed detector compared with generic coherent detectors and validate the effectiveness of phase information exploitation via numerical simulations. [ABSTRACT FROM AUTHOR]

We propose new transmission schemes and receiver algorithms for unsourced multiple access (UMA) in MIMO and massive MIMO channels. Each active transmitter’s information bits are first channel encoded. The coded bits are divided into sub-blocks and each sub-block is modulated and transmitted. For both MIMO and massive MIMO channels, the conventional nonlinear modulation can be employed where each sub-block of coded bits is mapped to a transmitted signal vector. For the massive MIMO channel, we propose a new hybrid modulation scheme to reduce the receiver complexity, where the first sub-block is nonlinearly modulated, and the subsequent sub-blocks are linearly modulated and spread by the first sub-block signal. We also propose sparsity-exploiting blind receiver algorithms. Specifically, for the MIMO case, we exploit the codeword sparsity inherent in the UMA system, and a channel clustering technique, to estimate the channel and the transmitted signal of each transmitter. For the massive MIMO, in addition to the codeword sparsity, we further exploit the channel sparsity and user sparsity in estimating the channel and transmitted signal of each transmitter. The proposed receiver algorithms for both MIMO and massive MIMO channels output either hard or soft estimates of the coded bits, and therefore single-user channel decoding of the information bits can be performed for each transmitter. Extensive simulation results are provided to demonstrate the performances of the proposed algorithms. [ABSTRACT FROM AUTHOR]

Covert wireless communications aim to hide the existence of transmission behavior from watchful adversaries to enhance security. In this paper, we propose a spectrum mask based covert communication strategy in Internet of Things (IoT) networks, where the overt channels are leveraged to enhance the covertness. Specifically, the legitimate IoT transmitter superimposes its own message on the overt channel to avoid being detected by the warden. We assume that proper Gaussian signaling (PGS) is adopted at the overt channel, and improper Gaussian signaling (IGS) is adopted at the legitimate transmitter to improve the covert transmission performance. To maximize the covert rate of the legitimate IoT system, a joint transmit power and IGS factor optimization problem is formulated under the constraints of covertness requirement. The metric of minimum error detection probability, that represents the worst-case for the legitimate transmitter, is utilized to measure the covertness. By exploiting the piece-wise monotonic properties of the objective function and the constraints, we derive the optimal transmit power and IGS factor pairs in both the IGS and PGS schemes. Finally, extensive numerical results are presented to demonstrate that the IGS scheme can improve the covert rate compared to the PGS scheme under a given covertness constraint. [ABSTRACT FROM AUTHOR]

In the achievable rate region maximization for intelligent reflecting surfaces (IRSs)-assisted interference channel (IFC), where more than one pair of transceivers communicates and interferes with each other simultaneously. Specifically, we optimize the transmit power and passive beamforming vectors at all the IRSs to obtain the Pareto boundary of the achievable rate region in IFC, subject to the unit-modulus constraints for the passive beamforming vectors at the IRSs and transmit power budgets at the transmitters. To solve the formulated non-convex optimization problem efficiently, we resort to optimize each variable alternatively until convergence. The optimization of transmit power is based on a locally optimal fixed-point iteration method. Instead of using the conventional high-complexity and sub-optimal Gaussian randomization-aided semi-definite relaxation (SDR) technique for the passive beamforming design, we first propose a novel locally optimal homotopy optimization based majorization-minimization method. To further reduce the computational complexity, a locally optimal log-sum-exp approximation based manifold optimization method is also proposed. Simulation results validate that our proposed methods can significantly decrease the computational complexity and outperform the conventional SDR-based algorithm. [ABSTRACT FROM AUTHOR]

A step-down wireless power transfer converter with center-tapped pickup windings is proposed in this article. The pickup winding is split into two sections and only one is connected to the load. This topology is more suitable for low-voltage level applications, such as consumer electronic products. Like the conventional series–parallel compensation technique, the circuit does not induce high circulation current at the transmitter coil under light load operation. The loosely coupled coils are analyzed with mutual inductance model; in addition, the input impedance and voltage gain are derived. The input impedance is proportional to the load impedance, and the voltage gain is less sensitive to the load variation. The proposed topology performs better than the conventional one at higher load conditions, especially when the coupling is poor. The efficiency of a laboratory circuit reaches 88.8% at best condition and it is higher than 63% ranging from 10- to 100-W load at 10- or 60-mm coil separation. [ABSTRACT FROM AUTHOR]