Search

In this letter, we investigate an unmanned aerial vehicle (UAV) enabled wireless powered communication network (WPCN), in which the UAV first employs the radio frequency (RF) signal to power ground users, and then the users communicate with the UAV by using the harvested energy. The sum rate maximization problem in WPCN suffers doubly near-far effect caused by the double signal propagation loss in both the energy harvesting and communication stage. It is generally believed that this effect can be alleviated by integrating UAV into WPCN, thanks to its flexible deployment. However, due to the lack of analytical solution in state-of-art research, it is still unclear how to quantify the advantage that the mobility of UAV brings to migrating the doubly near-far effect. To address this issue, by showing that the optimal UAV trajectory has a multi-location hovering structure, we first derive the closed-form optimal solution of resource allocation, as a function of the UAV hovering location for downlink wireless power transfer (WPT). We then prove that the UAV in our case only needs to hover at a single location for WPT. More importantly, it is explicitly shown that the doubly near far effect can be alleviated into near-far effect. Simulation results validate our analysis. [ABSTRACT FROM AUTHOR]

This paper considers a rotary-wing unmanned aerial vehicle (UAV)-enabled wireless power transfer system, where a UAV is dispatched as an energy transmitter (ET), transferring radio frequency (RF) signals to a set of energy receivers (ERs) periodically. We aim to maximize the energy harvested at all ERs by jointly optimizing the UAV's three-dimensional (3D) placement, beam pattern and charging time. However, the considered optimization problem taking into account the drone flight altitude and the wireless coverage performance is formulated as a non-convex problem. To tackle this problem, we propose a low-complexity iterative algorithm to decompose the original problem into four sub-problems in order to optimize the variables sequentially. In particular, we first use the sequential unconstrained convex minimization based algorithm to find the globally optimal UAV two-dimensional (2D) position. Subsequently, we can directly obtain the optimal UAV altitude as the objective function of problem is monotonic decreasing with respect to UAV altitude. Then, we propose the multiobjective evolutionary algorithm based on decomposition (MOEA/D) based algorithm to control the phase of antenna array elements, in order to achieve high steering performance of multi-beams. Finally, with the above solved variables, the original problem is reformulated as a single-variable optimization problem where charging time is the optimization variable, and can be solved using the standard convex optimization techniques. Furthermore, we use the branch and bound method to design the UAV trajectory which can be constructed as traveling salesman problem (TSP) to minimize flight distance. Numerical results validate the theoretical findings and demonstrate that significant performance gain in terms of sum received power of ERs can be achieved by the proposed algorithm in UAV-enabled wireless power transfer networks. [ABSTRACT FROM AUTHOR]

This paper studies an unmanned aerial vehicle (UAV)-enabled two-user interference channel for wireless powered communication networks (WPCNs). In this system, two UAVs wirelessly charge two low-power Internet-of-things (IoT)-devices on the ground and collect information from them. We consider two scenarios when both UAVs cooperate in energy transmission and/or information reception via interference coordination and coordinated multi-point (CoMP), respectively. For both scenarios, the UAVs’ trajectories are designed to not only enhance the wireless power transfer (WPT) efficiency in the downlink, but also mitigate the co-channel interference for wireless information transfer (WIT) in the uplink. In particular, the objective is to maximize the uplink common (minimum) throughput of the two IoT-devices over a finite UAV mission period, by jointly optimizing the trajectories of both UAVs and the downlink/uplink wireless resource allocation, subject to the maximum flying speed and collision avoidance constraints for UAVs, as well as the individual energy neutrality constraints at IoT-devices. Under both scenarios with interference coordination and CoMP, we first obtain the optimal solutions to the two common-rate maximization problems for the special case with sufficiently long UAV mission duration. Next, we obtain high-quality solutions for the practical case with finite UAV mission duration by using the alternating optimization and successive convex approximation (SCA). Numerical results show that the proposed designs significantly outperform benchmark schemes, and the utilization of CoMP achieves much higher uplink throughput than interference coordination. [ABSTRACT FROM AUTHOR]