Search

In this letter, we investigate an unmanned aerial vehicle (UAV) enabled wireless powered communication network (WPCN), in which the UAV first employs the radio frequency (RF) signal to power ground users, and then the users communicate with the UAV by using the harvested energy. The sum rate maximization problem in WPCN suffers doubly near-far effect caused by the double signal propagation loss in both the energy harvesting and communication stage. It is generally believed that this effect can be alleviated by integrating UAV into WPCN, thanks to its flexible deployment. However, due to the lack of analytical solution in state-of-art research, it is still unclear how to quantify the advantage that the mobility of UAV brings to migrating the doubly near-far effect. To address this issue, by showing that the optimal UAV trajectory has a multi-location hovering structure, we first derive the closed-form optimal solution of resource allocation, as a function of the UAV hovering location for downlink wireless power transfer (WPT). We then prove that the UAV in our case only needs to hover at a single location for WPT. More importantly, it is explicitly shown that the doubly near far effect can be alleviated into near-far effect. Simulation results validate our analysis. [ABSTRACT FROM AUTHOR]

This letter considers a solar-powered unmanned aerial vehicle (UAV) system, where the UAV collects data from Internet of Things Devices (IoTDs) on the ground while also charging them using laser charging technology. Both the linear and nonlinear laser charging models are considered. We aim to maximize the residual energy of the UAV while satisfying the requirements of IoTDs by jointly optimizing the three-dimensional (3D) trajectory of UAV and scheduling for IoTDs. The optimization problem is formulated as a mixed integer non-convex problem which is difficult to solve in general. We apply the successive convex approximation and block coordinate descent algorithm to address this problem successfully. Simulation results verify the effectiveness of our algorithm compared with two benchmark methods. [ABSTRACT FROM AUTHOR]

Due to the small size, low cost, and autonomous nature, unmanned aerial vehicles (UAVs) have attracted growing attention in improving traditional networks’ performance. This paper considers a multi-UAV enabled large-scale wireless recharge networks, where a group of UAVs is dispatched as mobile wireless power transfer, and information collection systems to serve a set of ground low-power sensor nodes. Specifically, the UAVs employ radio frequency (RF) wireless power transfer (WPT) to supply energy towards the sensor nodes, and the communication services are available via wireless information transfer (WIT) systems. To achieve balanced energy consumption among UAVs, we maximize the energy utilization efficiency of UAVs, and minimize the communication delay by optimizing the trajectory jointly with constraints of the energy capacity, and the area of the target region. The formulated problem is a mixed-integer programming problem that is a variation of multiple traveling salesman problem. Thus we present a heuristic algorithm that combines the evolutionary algorithm, and variable neighborhood search to achieve the optimal visited sequence of the sensor nodes. Finally, extensive numerical results are provided to evaluate the performance of the proposed algorithm. It draws new insights on the estimation of the feasibility of the given UAVs whose energy capacity is limited. [ABSTRACT FROM AUTHOR]

This paper considers a rotary-wing unmanned aerial vehicle (UAV)-enabled wireless power transfer system, where a UAV is dispatched as an energy transmitter (ET), transferring radio frequency (RF) signals to a set of energy receivers (ERs) periodically. We aim to maximize the energy harvested at all ERs by jointly optimizing the UAV's three-dimensional (3D) placement, beam pattern and charging time. However, the considered optimization problem taking into account the drone flight altitude and the wireless coverage performance is formulated as a non-convex problem. To tackle this problem, we propose a low-complexity iterative algorithm to decompose the original problem into four sub-problems in order to optimize the variables sequentially. In particular, we first use the sequential unconstrained convex minimization based algorithm to find the globally optimal UAV two-dimensional (2D) position. Subsequently, we can directly obtain the optimal UAV altitude as the objective function of problem is monotonic decreasing with respect to UAV altitude. Then, we propose the multiobjective evolutionary algorithm based on decomposition (MOEA/D) based algorithm to control the phase of antenna array elements, in order to achieve high steering performance of multi-beams. Finally, with the above solved variables, the original problem is reformulated as a single-variable optimization problem where charging time is the optimization variable, and can be solved using the standard convex optimization techniques. Furthermore, we use the branch and bound method to design the UAV trajectory which can be constructed as traveling salesman problem (TSP) to minimize flight distance. Numerical results validate the theoretical findings and demonstrate that significant performance gain in terms of sum received power of ERs can be achieved by the proposed algorithm in UAV-enabled wireless power transfer networks. [ABSTRACT FROM AUTHOR]