Search

In modern trends, wireless sensor networks (WSNs) are interesting, and distributed in the environment to evaluate received data. The sensor nodes have a higher capacity to sense and transmit the information. A WSN contains low-cost, low-power, multi-function sensor nodes, with limited computational capabilities, used for observing environmental constraints. In previous research, many energy-efficient routing methods were suggested to improve the time of the network by minimizing energy consumption; sometimes, the sensor nodes run out of power quickly. The majority of recent articles present various methods aimed at reducing energy usage in sensor networks. In this paper, an energy-efficient clustering/routing technique, called the energy and distance based multi-objective red fox optimization algorithm (ED-MORFO), was proposed to reduce energy consumption. In each communication round of transmission, this technique selects the cluster head (CH) with the most residual energy, and finds the optimal routing to the base station. The simulation clearly shows that the proposed ED-MORFO achieves better performance in terms of energy consumption (0.46 J), packet delivery ratio (99.4%), packet loss rate (0.6%), end-to-end delay (11 s), routing overhead (0.11), throughput (0.99 Mbps), and network lifetime (3719 s), when compared with existing MCH-EOR and RDSAOA-EECP methods.

Nowadays, a large number of digital data are transmitted worldwide using wireless communications. Therefore, data security is a significant task in communication to prevent cybercrimes and avoid information loss. The Advanced Encryption Standard (AES) is a highly efficient secure mechanism that outperforms other symmetric key cryptographic algorithms using message secrecy. However, AES is efficient in terms of software and hardware implementation, and numerous modifications are done in the conventional AES architecture to improve the performance. This research article proposes a significant modification to the AES architecture’s key expansion section to increase the speed of producing subkeys. The fork–join model of key expansion (FJMKE) architecture is developed to improve the speed of the subkey generation process, whereas the hardware resources of AES are minimized by avoiding the frequent computation of secret keys. The AES-FJMKE architecture generates all of the required subkeys in less than half the time required by the conventional architecture. The proposed AES-FJMKE architecture is designed and simulated using the Xilinx ISE 5.1 software. The Field Programmable Gate Arrays (FPGAs) behaviour of the AES-FJMKE architecture is analysed by means of performance count for hardware resources, delay, and operating frequency. The existing AES architectures such as typical AES, AES-PNSG, AES-AT, AES-BE, ISAES, AES-RS, and AES-MPPRM are used to evaluate the efficiency of AES-FJMKE. The AES-FJMKE implemented using Spartan 6 FPGA used fewer slices (i.e., 76) than the AES-RS.

In recent trends, wireless sensor networks (WSNs) have become popular because of their cost, simple structure, reliability, and developments in the communication field. The Internet of Things (IoT) refers to the interconnection of everyday objects and sharing of information through the Internet. Congestion in networks leads to transmission delays and packet loss and causes wastage of time and energy on recovery. The routing protocols are adaptive to the congestion status of the network, which can greatly improve the network performance. In this research, collision-aware routing using the multi-objective seagull optimization algorithm (CAR-MOSOA) is designed to meet the efficiency of a scalable WSN. The proposed protocol exploits the clustering process to choose cluster heads to transfer the data from source to endpoint, thus forming a scalable network, and improves the performance of the CAR-MOSOA protocol. The proposed CAR-MOSOA is simulated and examined using the NS-2.34 simulator due to its modularity and inexpensiveness. The results of the CAR-MOSOA are comprehensively investigated with existing algorithms such as fully distributed energy-aware multi-level (FDEAM) routing, energy-efficient optimal multi-path routing protocol (EOMR), tunicate swarm grey wolf optimization (TSGWO), and CoAP simple congestion control/advanced (CoCoA). The simulation results of the proposed CAR-MOSOA for 400 nodes are as follows: energy consumption, 33 J; end-to-end delay, 29 s; packet delivery ratio, 95%; and network lifetime, 973 s, which are improved compared to the FDEAM, EOMR, TSGWO, and CoCoA.

Smart home and smart building systems based on the Internet of Things (IoT) in smart cities currently suffer from security issues. In particular, data trustworthiness and efficiency are two major concerns in Internet of Things (IoT)-based Wireless Sensor Networks (WSN). Various approaches, such as routing methods, intrusion detection, and path selection, have been applied to improve the security and efficiency of real-time networks. Path selection and malicious node discovery provide better solutions in terms of security and efficiency. This study proposed the Dynamic Bargaining Game (DBG) method for node selection and data transfer, to increase the data trustworthiness and efficiency. The data trustworthiness and efficiency are considered in the Pareto optimal solution to select the node, and the bargaining method assigns the disagreement measure to the nodes to eliminate the malicious nodes from the node selection. The DBG method performs the search process in a distributed manner that helps to find an effective solution for the dynamic networks. In this study, the data trustworthiness was measured based on the node used for data transmission and throughput was measured to analyze the efficiency. An SF attack was simulated in the network and the packet delivery ratio was measured to test the resilience of the DBG and existing methods. The results of the packet delivery ratio showed that the DBG method has higher resilience than the existing methods in a dynamic network. Moreover, for 100 nodes, the DBG method has higher data trustworthiness of 98% and throughput of 398 Mbps, whereas the existing fuzzy cross entropy method has data trustworthiness of 94% and a throughput of 334 Mbps.