Search

The toxicological effects from all components in oil sands process-affected water (OSPW) are not known. Alternatively, monitoring the variations and abundance of different classes and compounds after treatments might be a useful approach in OSPW remediation. In this study, the variations in the compositions of classical and heteroatomic naphthenic acids (NAs) after treatment using advanced oxidation processes (AOPs), mainly ozone and peroxone, and two different mass spectrometry methods; ultra-performance liquid chromatography time-of-flight (UPLC-TOFMS) and Fourier transform ion cyclotron resonance (FTICR-MS), were examined. Two markers (O 2 S:O 3 S:O 4 S and O 2 :O 4 ratios) were used to reveal changes and similarities of the treated water characteristics with those in natural waters. Both ratios decreased after all treatments, from 2.7:4.8:2.1 and 3.59 in raw OSPW to 0:1.4:0.5 and 0.7, respectively, in peroxone (1:2), becoming close to the reported ratios in natural waters. Toxicity toward Vibrio fischeri showed residual toxic effects after AOPs, suggesting that part of OSPW toxicity may be caused by specific compounds of NAs (i.e., similar reduction (50%) was achieved in both toxicity and abundance in O 2 species with carbon 15–26) and/or generated by-products (e.g., O 3 S classes at double bond equivalent (DBE) = 4 and C 9 H 12 O 2 at DBE = 4). Although by-products were generated, the best biodegradability enhancement and chemical oxygen demand reduction were achieved in peroxone (1:2) compared to ozone, suggesting the possibility of using combined OSPW remediation approaches (i.e., peroxone coupled with biological process). The recommended indicators can assist in evaluating the treatments' performance and in examining the best removal levels to accomplish significant toxicity reduction. [ABSTRACT FROM AUTHOR]

Abstract: The oxidation of bromoxynil and trifluralin was investigated using ozone (O3) and O3 combined with hydrogen peroxide (H2O2) in natural waters using batch reactors. The results indicated that these pesticides could not be completely degraded during ozonation, achieving degradation levels lower than 50%. An enhancement of the level of degradation was observed using O3/H2O2 process. A biphasic behaviour of O3 was also observed. Depending on the experimental conditions, the rate constant for O3 decomposition was estimated to be between 7.4 × 10−4 s−1 to 5.8 × 10−2 s−1, and 3.2 × 10−3 s−1 to 4.2 × 10−2 s−1 for bromoxynil and trifluralin samples, respectively. Acute toxicity analysis performed using Microtox® showed a decrease in the toxic effects of the samples on the luminescent bacteria during the first few minutes of treatment, followed by an increase of the toxic effects at the end of the reaction for both pesticides. The quantification of oxidation by-products generated during treatment was also addressed. The total molar balances of the degradation by-products versus the initial pesticide concentrations ranged from 60 to 103% under different experimental conditions. [Copyright &y& Elsevier]

Abstract: In this study, liquid swine manure was treated by physico-chemical treatment, including coagulation, flocculation, and sedimentation followed by an oxidation step as a polishing treatment at a bench-scale level. A superabsorbent polymer (SAP) and a mineral and salt formulation able to generate molecular iodine were used as coagulant and oxidant agents, respectively. The results indicated that SAP at a concentration of 1.25g/L was able to reduce 32% of the initial total suspended solids (TSS) in experiments using supernatant at its natural pH. Following the SAP application, 82% of initial ammonia (NH3), 78% of initial total organic carbon (TOC), and 93% of the total coliforms were reduced using 40mg/L of free iodine. In experiments performed with diluted supernatant (five-fold dilution), it was found that SAP at a concentration of 0.5g/L was capable of reducing 80% of the initial TSS in experiments at pH 11. A leaching study was conducted to assess the safety of sludge disposal. From the leaching tests using non-diluted supernatant, it was found that 24% of the chloride (Cl−) and 50% of the phosphate (PO4 3−) ions retained in the sludge leached to the ultrapure water after 48h. Potential contamination due to leaching of NH3, nitrite (NO2 −) and nitrate (NO3 −) was found to be statistically insignificant. [Copyright &y& Elsevier]

This treatability study evaluated the overall effectiveness of advanced oxidation processes (AOPs) to treat membrane concentrates containing the pesticides bromoxynil and trifluralin. The results of study indicate that high levels of pesticide degradation were achieved using ozone (O3) plus hydrogen peroxide (H2O2) for all concentrate matrices. However, the toxicity of the samples during the O3/H2O2 process was higher than that obtained during ultraviolet (UV) light combined with H2O2. Low levels of pesticide oxidation were observed in experiments using a mixture of pesticides during all treatment options. [ABSTRACT FROM AUTHOR]

Abstract: Water is integral to both operational and environmental aspects of the oil sands industry. A water treatment option based on the use of petroleum coke (PC), a by-product of bitumen upgrading, was examined as an opportunity to reduce site oil sands process-affected water (OSPW) inventories and net raw water demand. Changes in OSPW quality when treated with PC included increments in pH levels and concentrations of vanadium, molybdenum, and sulphate. Constituents that decreased in concentration after PC adsorption included total acid-extractable organics (TAO), bicarbonate, calcium, barium, magnesium, and strontium. Changes in naphthenic acids (NAs) speciation were observed after PC adsorption. A battery of bioassays was used to measure the OSPW toxicity. The results indicated that untreated OSPW was toxic towards Vibrio fischeri and rainbow trout. However, OSPW treated with PC at appropriate dosages was not acutely toxic towards these test organisms. Removal of TAO was found to be an adsorption process, fitting the Langmuir and Langmuir–Freundlich isotherm models. For TAO concentrations of 60mg/L, adsorption capacities ranged between 0.1 and 0.46mg/g. This study demonstrates that freshly produced PC from fluid cokers provides an effective treatment of OSPW in terms of key constituents'' removal and toxicity reduction. [Copyright &y& Elsevier]

Abstract: The Athabasca Oil Sands industry produces large volumes of oil sands process-affected water (OSPW) as a result of bitumen extraction and upgrading processes. Constituents of OSPW include chloride, naphthenic acids (NAs), aromatic hydrocarbons, and trace heavy metals, among other inorganic and organic compounds. To address the environmental issues associated with the recycling and/or safe return of OSPW into the environment, water treatment technologies are required. This study examined, for the first time, the impacts of pretreatment steps, including filtration and petroleum-coke adsorption, on ozonation requirements and performance. The effect of the initial OSPW pH on treatment performance, and the evolution of ozonation and its impact on OSPW toxicity and biodegradability were also examined. The degradation of more than 76% of total acid-extractable organics was achieved using a semi-batch ozonation system at a utilized ozone dose of 150mg/L. With a utilized ozone dose of 100mg/L, the treated OSPW became more biodegradable and showed no toxicity towards Vibrio fischeri. Changes in the NA profiles in terms of carbon number and number of rings were observed after ozonation. The filtration of the OSPW did not improve the ozonation performance. Petroleum-coke adsorption was found to be effective in reducing total acid-extractable organics by a 91%, NA content by an 84%, and OSPW toxicity from 4.3 to 1.1 toxicity units. The results of this study indicate that the combination of petroleum-coke adsorption and ozonation is a promising treatment approach to treat OSPW. [Copyright &y& Elsevier]

The quality of heavy oil electric desalting wastewaters (HO-EDWs) affects the effectiveness of refinery wastewater treatment plants. In this study, an integrated coagulation-ozonation (ICO) process was used to pretreat HO-EDWs and the influences on the characteristics of dissolved organic pollutants (DOPs) were investigated. Coagulation using aluminum sulfate removed 39% of soluble chemical oxygen demand (SCOD), 21% of dissolved organic carbon (DOC), 57% of petroleum hydrocarbons and 38% of polar oils from Liaohe HO-EDWs and the biodegradability was greatly improved. Ozonation removed 33% of SCOD and 88% of polar oils from the coagulated HO-EDWs. Most species of aromatic compounds, phenols, aliphatic acids, anilines and naphthenic acids with high C numbers and ring numbers were degraded and the unsaturation degrees of DOPs significantly decreased under ozonation. As a result, the biodegradability was further improved and the acute toxicity towards Vibrio fischeri was substantially reduced. Some O x S 1 species and organic nitrogen compounds in HO-EDWs were penetrated through ozonation and caused the residual biotoxicity. The results demonstrate the potential of ICO pretreatment for improving the quality of refractory HO-EDWs. [Display omitted] • ICO pretreatment is effective in reducing pollutants contents in HO-EDWs. • ICO pretreatment improved the biodegradability of HO-EDWs. • Ozonation changed the compositions of coagulation-resistant DOPs. • Ozonation significantly decreased the acute toxicity of HO-EDWs towards V. fischeri. [ABSTRACT FROM AUTHOR]