Search

Purpose: One-stage bilateral shoulder arthroplasty has the advantage of requiring a single hospital stay and a single anaesthesia. The topic has been little reported, unlike one stage bilateral hip and knee arthroplasty, which have demonstrated their interest. The aim of the present study was to determine peri- and early post-operative morbidity and mortality after this procedure. The study hypothesis was that peri- and early post-operative morbidity and mortality in one stage bilateral shoulder arthroplasty is low in selected patients and that satisfaction is high. Methods: A single-centre retrospective study assessed peri- and early post-operative morbidity and mortality in one stage bilateral shoulder arthroplasty. Twenty-one patients, aged < 80 years, with ASA score ≤ 3, were consecutively operated on between 1999 and 2020. Indications comprised primary osteoarthritis, aseptic osteonecrosis, inflammatory arthritis, massive rotator cuff tear, and dislocation fracture, involving both shoulders. Results: There were no early deaths. The complication rate was 10% (4/21 cases). No prosthesis dislocation or sepsis was reported. Mean blood loss was 145 ± 40 cc, mean surgery time 164 ± 63 min, and mean hospital stay five ± four days. Only one patient required postoperative transfusion. Functional results at six months showed significantly improved range of motion and good patient satisfaction. Conclusions: One-stage bilateral shoulder arthroplasty was feasible in selected patients. Mortality was zero, and morbidity was low. Surgery time was reasonable and required no repositioning. Postoperative home help is indispensable for patient satisfaction during rehabilitation. [ABSTRACT FROM AUTHOR]

Purpose: Reverse shoulder arthroplasty (RSA) has shown improvement in clinical outcomes for various conditions, although some authors expressed concern about the restoration of active internal rotation (AIR). The current study assesses preoperative and intraoperative predictive factors of AIR in patients having a Grammont-style RSA with a minimum five year follow-up. Methods: We conducted a retrospective multicentric study, including patients operated on with a 155° Grammont-style RSA for cuff-related pathology or primary osteoarthritis with posterior subluxation or an associated cuff tear. Patients were clinically evaluated at a minimum of five year follow-up. Patients with previous surgery or those who had a tendon transfer with the RSA were excluded. Demographic parameters, BMI, preoperative notes, and operative reports were obtained from medical records. AIR was graded according to the constant score system from 0 to 10. Results: A total of 280 shoulders in 269 patients (mean age at surgery, 74.9 ± 5.9 years) met the inclusion criteria and were analyzed. The average follow-up was 8.1 years (range, 5–16 years). Overall, AIR increased from 4.2 (SD 2.5, range 0 to 10) preoperatively to 5.9 (SD 2.6, range 0 to 10) at final follow-up. At the last follow-up, AIR increased in 56% of cases, was unchanged in 26% and decreased in 18%. In 188 shoulders (67%), internal rotation was functional and allowed patients to reach the level of L3 or higher. Multivariable linear regression found the following preoperative clinical factors predictive of worse AIR after RSA: male gender (ß = −1.25 [−2.10; −0.40]; p = 0.0042) and higher values of BMI (ß = −0.085 [−0.17; −0.0065]; p = 0.048). Two surgical factors were associated with better AIR after RSA: glenoid lateralization with BIO-RSA technique (ß = 0.80 [0.043; 1.56]; p = 0.039) and subscapularis repair (ß = 1.16 [0.29; 2.02]; p = 0.0092). Conclusions: With a mean of eight year follow-up (5 to 16 years), internal rotation was functional (≥ L3 level) in 67% of operated shoulders after Grammont-style RSA; however, two patients out of ten had decreased AIR after surgery. Male patients and those with higher BMIs had worse AIR, with glenoid lateralization (using the BIO-RSA technique) and subscapularis repair, as they are predictive of increased AIR after RSA. Level of evidence: Case series, Level IV [ABSTRACT FROM AUTHOR]

Purpose: The goal of this study was to assess the clinical outcomes associated with anatomic healing of the greater tuberosity in patients treated for proximal humerus fractures with reverse shoulder arthroplasty. Our hypothesis was that anatomic healing of the greater tuberosity leads to less complications and better functional outcomes. Methods: Results: Patients from the GT+ group presented better functional outcomes than the GT− group in all evaluated outcomes. Mean constant score was 61 ± 14 versus 56 ± 15, and the subjective shoulder value (SSV) was 77 ± 14 versus 64 ± 21 (p < 0.001). Forward elevation was 128° ± 28° versus 107° ± 30° and external rotation was 23° ± 17° versus 14° ± 17° (p < 0.001). Twenty patients presented with at least one prosthetic dislocation (7 GT+ vs 13 GT−) while nine patients were revised for humeral loosening (1 GT+ vs 8 GT−). The use of a fracture specific humeral stem was associated with a higher rate of greater tuberosity healing. Conclusions: Non-anatomic healing of the greater tuberosity was associated with a higher dislocation and humeral loosening rate. Anatomic healing of the greater tuberosity lead to better functional outcomes, less humeral-sided complications, and fewer re-operations. [ABSTRACT FROM AUTHOR]

Background: Humeral bone loss is commonly encountered during revision shoulder arthroplasty and anticipating humeral bone defects can help the revision surgeon make appropriate plans to achieve adequate fixation and stability. No validated classification system exists to characterize humeral bone loss in the setting of revision shoulder arthroplasty.Questions/purposes: The purposes of this study were (1) to create a classification system for humeral bone loss in revision shoulder arthroplasty; (2) to determine the classification system's reliability; and (3) to determine whether humeral bone loss type is associated with intraoperative humeral-related reconstruction characteristics.Methods: This was a comparative retrospective radiographic study. First, six surgeons from five centers collaborated to create a classification by consensus. Second, two surgeons from two other centers who had fellowship training in shoulder and elbow surgery, who were blinded to each other's grades and all patient details other than plain radiographs, and who were not involved in creation of the system, classified true AP, AP, and lateral (axillary and/or scapular-Y) radiographs from 108 revision (413 radiographs) from one center that were performed between November 15, 2006, and January 4, 2018. Interobserver reliability was calculated by comparing those two reviews and determining Cohen's κ. In addition, one reviewer repeated his assessments twice, 4 months apart, to determine intraobserver reliability using Cohen's κ. Third, we performed a retrospective chart study of these same revisions to determine intraoperative humeral-related reconstruction characteristics such as the use of greater tuberosity fixation, stem length, humeral bone grafting, and the use of proximal humeral replacement or total humeral replacement; at the center where these revisions were performed during that timespan, no attempt to classify bone loss was made. During that period, the general indications for greater tuberosity fixation included the absence of a stable osseous connection between the greater tuberosity and the shaft of the humerus with a tuberosity amendable to repair; the general indications for use of longer stems were inability to obtain a minimum of two cortical widths of overlap between the implant and the humeral diaphysis and/or loss of the greater tuberosity; and the general indications for proximal and total humeral replacement were bone loss that was felt to be too severe to allow reconstruction with allograft.Results: The classification system consists of three types of humeral bone loss: Type 1 is loss of the epiphysis with subtypes for loss of the calcar and loss of the greater tuberosity; Type 2 is loss of the metadiaphysis above the deltoid attachment with a subtype for cortical thinning; and Type 3 is bone loss extending below the deltoid attachment with a subtype for cortical thinning. We studied 108 revisions: 38 (35%) without bone loss, 34 (31%) Type 1, 27 (25%) Type 2, and nine (8%) Type 3. For reliability, interrater κ was 0.545 and in 71% (77 of 108) of revisions, the two raters agreed on a numeric type. Intrarater κ was 0.615 and in 77% (83 of 108) of revisions, the rater agreed with himself as to the numeric type. Stem length increased with class type (Type 1 median [range] 130 [70-210], Type 2 150 [70-210], Type 3 190 [70-240], p = 0.005). Most greater tuberosity fixation for intraoperative fracture was in Types 1 and 2 (13 of 18 compared with the five of 18 of greater tuberosity fixation that was within Types 0 and 3, p = 0.043). Most bone grafting was in Types 2 and 3 (eight of 13 compared with five of 13 of bone grafting was in Types 0 and 1, p = 0.044). Most proximal humeral and total humeral replacements were in Type 3 (three of four compared with one of four, p < 0.001).Conclusions: We developed the Proximal Humeral Arthroplasty Revision Osseous inSufficiency (PHAROS) system, which has adequate, if imperfect, reliability to classify humeral bone loss in the setting of revision shoulder arthroplasty. This classification system may be useful to anticipate the complexity of humeral reconstruction. Further validation incorporating advanced imaging and further evaluators will be necessary.Level Of Evidence: Level III, diagnostic study. [ABSTRACT FROM AUTHOR]

Purpose: The impacts of humeral offset and stem design after reverse shoulder arthroplasty (RSA) have not been well-studied, particularly with regard to newer stems which have a lower humeral inclination. The purpose of this study was to analyze the effect of different humeral stem designs on range of motion and humeral position following RSA.Methods: Using a three-dimensional computer model of RSA, a traditional inlay Grammont stem was compared to a short curved onlay stem with different inclinations (155°, 145°, 135°) and offset (lateralised vs medialised). Humeral offset, the acromiohumeral distance (AHD), and range of motion were evaluated for each configuration.Results: Altering stem design led to a nearly 7-mm change in humeral offset and 4 mm in the AHD. Different inclinations of the onlay stems had little influence on humeral offset and larger influence on decreasing the AHD. There was a 10° decrease in abduction and a 5° increase in adduction between an inlay Grammont design and an onlay design with the same inclination. Compared to the 155° model, the 135° model improved adduction by 28°, extension by 24° and external rotation of the elbow at the side by 15°, but led to a decrease in abduction of 9°. When the tray was placed medially, on the 145° model, a 9° loss of abduction was observed.Conclusions: With varus inclination prostheses (135° and 145°), elevation remains unchanged, abduction slightly decreases, but a dramatic improvement in adduction, extension and external rotation with the elbow at the side are observed. [ABSTRACT FROM AUTHOR]

Background: The aim of this study was to radiographically analyze the long-term glenoid migration patterns following total shoulder arthroplasty to better understand the factors responsible for loosening. Methods: Complete radiographic follow-up of more than five years was available for 518 total shoulder arthroplasties performed for primary glenohumeral osteoarthritis with use of an anatomically designed prosthesis with a cemented, all-polyethylene, keeled glenoid component. Radiographs were assessed for humeral head subluxation, periprosthetic radiolucent lines, and shifting of the position of the glenoid component. The type of migration of the glenoid was defined according to the direction of tilt, or as subsidence in the case of medial migration. Results: Definite radiographic evidence of glenoid loosening was observed in 166 shoulders (32%) and was characterized by radiolucency of ≥2 mm over the entire bone-cement interface in thirty shoulders and by a migration of the glenoid component (shift or subsidence) in 136 shoulders. Three predominant patterns of migration of the glenoid component were observed: superior tilting in fifty-two shoulders (10%), subsidence in forty-one shoulders (7.9%), and posterior tilting in thirty-three shoulders (6.4%). Superior tilting of the glenoid was associated with three risk factors: low positioning of the glenoid component, superior tilt of the glenoid component on the immediate postoperative coronal plane radiographs, and superior subluxation of the humeral head (p < 0.05 for all). Subsidence of the glenoid component was associated with the use of reaming to optimize the seating and positioning of the glenoid component (p < 0.001). Posterior tilting of the glenoid component was associated with preoperative posterior subluxation (i.e., a Walch type-B glenoid) and with excessive reaming (p < 0.01 for both). Conclusions: The three patterns of migration observed in this study underscore the potential importance of the supporting bone beneath the glenoid component. In some shoulders, use of a keel or pegs to provide fixation of a polyethylene component in the absence of good support from subchondral bone may not be sufficient to resist compressive and eccentric forces, resulting in loosening. Preserving subchondral bone may be important for long-term longevity of the glenoid component. [ABSTRACT FROM AUTHOR]

Background: Aseptic glenoid component loosening remains a common problem in total shoulder arthroplasty (TSA). This study presents long-term prospective follow-up of 2 cemented all-polyethylene glenoid components with different backside design geometry and the effect on the presence and progression of radiolucent lines (RLLs). Materials and methods: Fifty-six TSAs were performed for primary osteoarthritis. Two surgeons used an identical technique to implant 32 flat-back and 24 convex-back glenoids. In particular, the glenoid components were cemented after a minimal reaming and bone compaction. Standardized postoperative radiologic and clinical follow-up was at 2 and 10 years. Three independent observers evaluated the x-ray images for RLLs around the base plate and keel. The results were analyzed for progression and influencing factors. Results: At 10 years, progression of RLL was seen in both components, but there was no difference between the 2 glenoid designs (P = .16). Younger patient age (P = .03), hand dominance (P = .017), and presence of early RLLs (P = .018) were significant factors for progression of RLLs. Constant scores deteriorated with progression of RLLs (P = .006). The glenoid revision rate at 10 years was 5%. Conclusion: At 10 years there was no difference in the presence or progression of RRLs between a flat-back and a convex-back glenoid all-polyethylene design. Young age, hand dominance, and poor implantation technique influence glenoid RLLs and affect the clinical result of TSA. [ABSTRACT FROM AUTHOR]

Abstract: The development of modern shoulder replacement surgery started over half a century ago with the pioneering work done by CS Neer. Several designs for shoulder prostheses are now available, allowing surgeons to select the best design for each situation. When the rotator cuff is intact, unconstrained prostheses produce reliable and reproducible results, with prosthesis survival rates of 97% after 10 years and 84% after 20 years. In patients with three- or four-part fractures of the proximal humerus, the outcome of shoulder arthroplasty depends largely on healing of the greater tuberosity, which is therefore a major treatment objective. Factors crucial to greater tuberosity union include selection of the optimal prosthesis design, flawless fixation of the tuberosities, and appropriate postoperative immobilization. The reverse shoulder prosthesis developed by Grammont has been recognized since 1991 as a valid option for patients with glenohumeral osteoarthritis. Ten-year prosthesis survival rates are 91% overall (including trauma and revisions) and 94% for glenohumeral osteoarthritis with head migration. These good results are generating interest in the reverse shoulder prosthesis as a treatment option in situations where unconstrained prostheses are unsatisfactory (primary glenohumeral osteoarthritis with marked glenoid cavity erosion; comminuted fractures in patients older than 75 years; post-traumatic osteoarthritis with severe tuberosity malunion or nonunion; massive irreparable rotator cuff tears with pseudoparalysis; failed rotator cuff repair; and proximal humerus tumor requiring resection of the rotator cuff insertions). [ABSTRACT FROM AUTHOR]

Background: Total shoulder arthroplasty (TSA) and hemiarthroplasty (HA) have shown good clinical outcomes in primary avascular necrosis of the humeral head (PANHH) both in short and long terms. The purpose of this study was to assess the complications, the clinical and radiological outcomes of shoulder arthroplasty in young patients with PANHH. Methods: One hundred and twenty-seven patients aged under 60 years old and suffering from PANHH were operated with arthroplasty. Patients were assessed clinically and radiographically before surgery with a minimum of 2 years of follow up (FU). Results: HA was performed on 108 patients (85%). Two patients were revised for painful glenoid wear after 2 and 4 years. TSA was performed on 19 patients (15%). Five TSA had to be revised for glenoid loosening (n = 4) or instability (n = 1). Revision rate was 26% with TSA and 2% with HA. There were no significant differences between HA and TSA in terms of clinical outcomes. Conclusions: With a mean FU of 8 years, HA and TSA improved clinical outcomes of patients with PANHH. HA revisions for painful glenoid wear were rare (2%). The revision rate was excessively high with TSA (26%). [ABSTRACT FROM AUTHOR]

This biographical sketch on Paul M. Grammont corresponds to the historic text, The Classic: Delta Shoulder Prosthesis for Rotator Cuff Rupture (1993), available at DOI . [ABSTRACT FROM AUTHOR]