Search

The purpose of this study is to use Health Technology Assessment (HTA) through the Six Sigma (SS) and DMAIC (Define, Measure, Analyse, Improve, Control) problem-solving strategies for comparing cemented and uncemented prostheses in terms of the costs incurred for Total hip arthroplasty (THA) and the length of hospital stay (LOS). Multinomial logistic regression analysis for modelling the data was also performed. Quantitative parameters extracted from gait analysis, electromyography and computed tomography images were used to compare the approaches, but the analysis did not show statistical significance. The variables regarding costs were studied with the Mann-Whitney and Kruskal-Wallis tests. No statistically significant difference between cemented and uncemented prosthesis for the total cost of LOS was found, but the cost of the surgeon had an influence on the overall expenses, affecting the cemented prosthetic approach. The material costs of surgery for the uncemented prosthesis and the cost of theatre of surgery for the cemented prosthesis were the most influential. Multinomial logistic regression identified the Vastus Lateralis variable as statistically significant. The overall accuracy of the model is 93.0%. The use of SS and DMAIC cycle as tools of HTA proved that the cemented and uncemented approaches for THA have similar costs and LOSy. [ABSTRACT FROM AUTHOR]

Nowadays, research on bone remodelling after a total hip arthroplasty (THA) is mainly performed using DXAscans, which gives a quantitative assessment but it can lose some pivotal features of how bone remodels since it is a 3d mechanism. The aim of this work was to enhance the understanding of the volumetric bone mineral density (vBMD) evolution after THA by developing a protocol to (i) three-dimensionally localise the changes in the proximal femur, and (ii) assess such changes in the long term. Twelve patients that underwent unilateral THA (with cemented/uncemented prostheses) were recruited. Three calibrated CT scans of the proximal femur were collected at different time points: 24 hours, 1 year and 6 years after surgery. The 3D models of the proximal femur were extracted, and an algorithm was developed to split them into the Gruen zones. The bone density gain and loss for both the whole proximal femur and those specific regions was calculated by comparing density values between the three sets of scans. Results showed lower amount of trabecular bone observed in the cemented cohort compared to the uncemented group, and some differences in terms of vBMD evolution were noticed in the whole femur and specifically in some Gruen zones. A high inter-patient variability was observed, ranging from some cases that showed a physiological bone remodelling, to some pathological conditions in which an unexpected increase/decrease of vBMD (e.g. +340% after one year) was noticed. In conclusion, the presented analysis is an useful tool (i) to understand the vBMD evolution in THA patients in the long-term, and (ii) for the follow-up of patients where a failure of the implant is to be expected. [ABSTRACT FROM AUTHOR]

Total hip arthroplasty is a ubiquitously successful orthopedic surgical procedure, whose prevalence is rising worldwide. While many investigations focus on characterizing periprosthetic pathophysiology, the objective of our research is to develop and describe multi-metric assemblies as a first step toward creating a patient-specific mobility index that rehabilitators and orthopedic surgeons can utilize for prescribing their respective procedures. In total, 48 total hip arthroplasty patients (both cemented and uncemented) undergoing unilateral, primary surgery went through computed tomographic scans and gait analysis measurements both before and 1 year following their surgery. Altogether, the reported quantitative metrics include 11 spatial and temporal gait parameters, muscle density, and electromyography signals from the rectus femoris, vastus lateralis, and vastus medialis, and bone mineral density values from bioimage analysis around the implant stem. We found that measured parameters from a subgroup were sensitive to changes observed during patient recovery, implicating the predictive sensitivity of these patient conditions. Most post-operative gait parameters changed significantly, while electromyography data indicated few significant differences. Moreover, results from bioimage analyses indicate a general reduction of periprosthetic bone mineral density after 1 year, in association with increasing density of the quadriceps muscles. Furthermore, this work identifies which quantitative metrics undergo the greatest variation after total hip arthroplasty and demonstrates the clinical feasibility of a multimodal approach to mobility assessment that may ultimately support decision-making for post-surgical rehabilitation protocols. [ABSTRACT FROM AUTHOR]

Total Hip Arthroplasty (THA) remains the gold standard of treatment for patients who suffer with a variety of hip-related pathological degeneration or trauma. These patients often exhibit significantly less post-operative pain and an increase in the range of motion of the joint, but there are still relatively common instances of debilitating periprosthetic complications that call into question the method for pre-surgical implant choice. Currently, there are two principal options for THA prostheses: cemented or non cemented. Utilizing the cemented procedure ensures a faster acquisition of adequate implant stability than with the non cemented procedure, but can eventually lead to an increased periprosthetic fracture risk. Non cemented prosthetic stems are more frequently revised within the first few years following THA due to periprosthetic fracture, but non cemented revision surgeries generally result in fewer complications than those of cemented implants. Surgeons typically rely on experience or simple patient metrics such as age and sex to prescribe which implant procedure is optimal, and while this may work for most patients, there is a clear need to analyze more rigoriously patient conditions that correlate to optimal post-THA outcomes. The results from the investigation reported herein indicate that an understanding of how the percent composition and quality of a patient's quadriceps muscle in both healthy and operated legs may be a better indicator for prosthetic choice. Additionally, these data emphasize that the traditional metrics of age and sex inadequately predict changes in quadriceps composition and quality and thereby have comparatively minor utility in determining the patient-appropriate prosthetic type. [ABSTRACT FROM AUTHOR]

Total hip arthroplasty ( THA) can be achieved by using a cemented or noncemented prosthesis. Besides patient's age, weight, and other clinical signs, the evaluation of the quality of the bones is a crucial parameter on which orthopedic surgeons base the choice between cemented and noncemented THA. Although bone density generally decreases with age and a cemented THA is preferred for older subjects, the bone quality of a particular patient should be quantitatively evaluated. This study proposes a new method to quantitatively measure bone density and fracture risk by using 3 D models extracted by a preoperative computed tomography ( CT) scan of the patient. Also, the anatomical structure and compactness of the quadriceps muscle is computed to provide a more complete view. A spatial reconstruction of the tissues is obtained by means of CT image processing, then a detailed 3 D model of bone mineral density of the femur is provided by including quantitative CT density information ( CT must be precalibrated). A finite element analysis will provide a map of the strains around the proximal femur socket when solicited by typical stresses caused by an implant. The risk for structural failure due to press-fitting and compressive stress during noncemented THA surgery was estimated by calculating a bone fracture risk index (ratio between actual compressive stress and estimated failure stress of the bone). A clinical trial was carried out including 36 volunteer patients (ages 22-77) who underwent unilateral THA surgery for the first time: 18 received a cemented implant and 18 received a noncemented implant. CT scans were acquired before surgery, immediately after, and after 12 months. Bone and quadriceps density results were higher in the healthy leg in about 80% of the cases. Bone and quadriceps density generally decrease with age but mineral density may vary significantly between patients. Preliminary results indicate the highest fracture risk at the calcar and the lowest at the intertrocanteric line, with some difference between patients. An analysis of the results suggest that this methodology can be a valid noninvasive decision support tool for THA planning; however, further analyses are needed to tune the technique and to allow clinical applications. Combination with gait analysis data is planned. [ABSTRACT FROM AUTHOR]

There are two surgical approaches to performing total hip arthroplasty (THA): a cemented or uncemented type of prosthesis. The choice is usually based on the experience of the orthopaedic surgeon and on parameters such as the age and gender of the patient. Using machine learning (ML) techniques on quantitative biomechanical and bone quality data extracted from computed tomography, electromyography and gait analysis, the aim of this paper was, firstly, to help clinicians use patient-specific biomarkers from diagnostic exams in the prosthetic decision-making process. The second aim was to evaluate patient long-term outcomes by predicting the bone mineral density (BMD) of the proximal and distal parts of the femur using advanced image processing analysis techniques and ML. The ML analyses were performed on diagnostic patient data extracted from a national database of 51 THA patients using the Knime analytics platform. The classification analysis achieved 93% accuracy in choosing the type of prosthesis; the regression analysis on the BMD data showed a coefficient of determination of about 0.6. The start and stop of the electromyographic signals were identified as the best predictors. This study shows a patient-specific approach could be helpful in the decision-making process and provide clinicians with information regarding the follow up of patients. [ABSTRACT FROM AUTHOR]

The variability in patient outcome and propensity for surgical complications in total hip replacement (THR) necessitates the development of a comprehensive, quantitative methodology for prescribing the optimal type of prosthetic stem: cemented or cementless. The objective of the research presented herein was to describe a novel approach to this problem as a first step towards creating a patient-specific, presurgical application for determining the optimal prosthesis procedure. Finite element analysis (FEA) and bone mineral density (BMD) calculations were performed with ten voluntary primary THR patients to estimate the status of their operative femurs before surgery. A compilation model of the press-fitting procedure was generated to define a fracture risk index (FRI) from incurred forces on the periprosthetic femoral head. Comparing these values to patient age, sex, and gender elicited a high degree of variability between patients grouped by implant procedure, reinforcing the notion that age and gender alone are poor indicators for prescribing prosthesis type. Additionally, correlating FRI and BMD measurements indicated that at least two of the ten patients may have received nonideal implants. This investigation highlights the utility of our model as a foundation for presurgical software applications to assist orthopedic surgeons with selecting THR prostheses. [ABSTRACT FROM AUTHOR]

The aim of the study was to compare the bone mineral density changes between unmatched patients undergoing total hip arthroplasty receiving uncemented and cemented type of implants. Previous studies have used DEXA or a two dimensional analysis to estimate the bone quality following total joint replacement, whereas this study presents the changes in three dimensions. Fifty subjects both male and females receiving both cemented and uncemented type of implant were recruited. Two CT scans were taken of each subject, the first at 24 h post surgery and the second one 1 year after surgery. The scans were calibrated using a phantom converting the Hounsfield units to bone mineral density values in g/cm3. The two scans were registered together using anatomical landmarks and resliced to compare the two femurs in the identical frame of reference. The bone density gain and loss was calculated by comparing density values between the two sets of scans. The results showed that most of the bone loss was located around the Lesser Trochanter and some bone density gain at the distal tip of the implant. The three dimensional density changes occur differently between individuals and the study showed no correlation of bone loss with age. The bone loss occurred mostly at the proximal femur, which is in agreement with previously presented studies. By carrying out three dimensional analysis on the bone gain and loss on the femur, it is possible to identify the patients that are showing high degree of bone loss. • The methodology presented maps 3D bone mineral changes over a period of time. • Proximal femur analysed for 50 subjects of both genders. • Analysis carried out 24 h post operation and 1 year post operation. • More in depth analysis than using conventional DXA methods. • High degree of subject specificity in bone gain and loss profile. [ABSTRACT FROM AUTHOR]