Search

In this article, the operating current and torque of surface-mounted permanent magnet (SPM) wind power generators with high-temperature superconducting (HTS) armature windings are analyzed. The influence of coil location and current angle on the electromagnetic performance is investigated systematically. The results show that the location of the HTS coils significantly affects the operating current and torque. Furthermore, the maximum torque current angle of SPM wind power generators with HTS armature windings can be different from 180° due to the interaction between the armature and magnet fields. A design optimization method for wind power generators with HTS armature windings is developed in this article. The optimal design is then identified with consideration of the coupling influence of coil location and current angle. [ABSTRACT FROM AUTHOR]

This paper compares the electromagnetic performance of 10-MW superconducting (SC) generators with three different topologies, i.e., iron-cored stator and rotor topology (ISIRT), iron-cored stator and air-cored rotor topology (ISART), and air-cored stator and rotor topology (ASART). The objective is to provide a powerful insight into the advantages and disadvantages of different topologies, and to establish some design guidelines for selecting an appropriate direct-drive SC generator for offshore wind turbine applications. First, the structures of the three SC generator topologies are introduced. Then, the influence of the SC coil cross-sectional area on torque capability is compared. After that three SC generators with different topologies are optimized, respectively, for further comparison, including the active material cost, weight, harmonics in the electromotive force, torque ripple, field harmonics in the SC coil, and forces on the rotor and stator components, etc. It is found that, with the same SC quantity, the torque capability of the ISIRT is much better than that of the other two topologies. However, the advantage becomes less significant when a larger area of the SC coil is employed. The air-gap flux density waveform of the ASART is much smoother than those of the ISIRT and ISART. The torque ripples of the ISIRT and the ISART are much higher than that of the ASART. The field harmonics (both amplitude and frequency) in the SC coil of the ASART are the lowest. For the ISIRT, most of the force on the rotor is acting on the rotor iron, and thus, the SC coil is more likely to be safe from a mechanical performance point of view and the design of the corresponding supporting structure is simple. However, for the air-cored rotor topologies, nearly all the force is acting on the SC coil. For the air-cored stator, the force mainly acts on the armature winding, whereas for the iron-cored stator, it is mainly on the stator teeth. Due to the excellent mechanical performance of iron, the iron-cored stator is therefore more robust. [ABSTRACT FROM PUBLISHER]

This paper investigates the influence of pole number and stator outer diameter on the performance of superconducting (SC) generators. The SC generator has an iron-cored rotor topology. First, the generator structure is introduced and the optimization procedure is described. Then, the influence of design parameters on performance, in terms of generator volume, weight, SC wire utilization, active material cost, etc., is presented. Some relationships for the optimal combinations for different performance attributes are established. In addition, the influence of SC material price on the determination of optimal stator outer diameter and pole number is discussed. Finally, the influence of SC coil area per pole on performance is also investigated. [ABSTRACT FROM PUBLISHER]

Flux-switching permanent-magnet (FSPM) brushless machines have emerged as an attractive machine type by virtue of their high torque densities, simple and robust rotor structure, and the fact that permanent magnets and coils are both located on the stator. Both 2-D and 3-D finite element analyses are employed to compare the performance of a conventional all poles wound (double-layer winding) topology with that of three modular alternate poles wound (single-layer winding) topologies, in terms of output torque, flux-linkage, back EMF, and inductances. It is shown that the FSPM machine can be designed in this way without incurring a significant performance penalty, but that some degree of rotor skewing or a variation in stator and rotor pole combination may be required in order to maintain a sinusoidal back-EMF waveform and reduce the torque ripple. Experimental validation is reported for both conventional all poles wound and alternate poles wound FSPM machine topologies. [ABSTRACT FROM AUTHOR]