Search

Objectives: An ex-vivo study was aimed at (i) programming clinically validated robot three-year random toothbrushing, (ii) evaluating cervical macro- and microwear patterns on all tooth groups of different functional age, (iii) documenting and codificating wear related morphological features at the cemento-enamel junction in young teeth and on roots in older teeth., Design: Following ethical approval random toothbrushing (44 strokes per tooth horizontally, rotating, vertically; 2x/d) with manual toothbrushes and low-abrasive dentifrice was performed in an artificial oral cavity with brushing-force 3.5 N on 14 extracted human teeth. Morphological features were examined by SEM at baseline and after simulated 3 years using the replication technique. 3D-SEM analyses were carried out with a four-quadrant back scattered electron detector. Wilcoxon-Mann-Whitney-test was used for statistical analyses., Results: 3-year random toothbrushing with horizontal, rotating and vertical brushing movements revealed morphological features classified as four enamel patterns, one dentin pattern and three cervical patterns. Negative impacts were enamel, cementum and dentin loss. Positive impact on oral health was removing dental calculus and straightening cervical traumatic and iatrogenic damages. The volume loss varied from x̅=34.25nl to x̅=87.75nl. Wear extended apically from 100 to 1500 micrometres., Conclusion: Robot simulated toothbrushing in an artificial oral cavity, with subsequent SEM and 3D-SEM assessment, elucidated both negative and oral health-contributing micromorphology patterns of cervical wear after simulated 3-year random toothbrushing. Cervical macro- and microwear of cementum revealed, for the first time, what we describe as overhanging enamel peninsulas and enamel islands on roots in young teeth, but no enamel islands on roots from older teeth after root cementum loss. In contrast, many older teeth exhibited enamel peninsulas., Competing Interests: Declaration of Competing Interest None., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Objectives: Tooth wear, also referred to as tooth surface loss, occurs due to causes other than caries. This involves the loss of hard tissues, namely enamel, dentin, and/or cementum. Types of tooth wear/tooth surface loss are abrasion, abfraction, attrition, and erosion. These multifactorial conditions can be caused by factors such as lifestyle, diet, or even habits, and may not be symptomatic. The focus of this article is to provide clinicians with detailed examples and explanations of the causes of tooth loss to aid in early diagnosis. Through early identification, the preventive measures outlined can be implemented to avoid excessive tooth wear. The provision of a treatment flowchart and general treatment recommendations aims to help clinicians determine when to restore these lesions and the most appropriate treatment measures for the four types of wear., Method and Materials: The PubMed (MEDLINE) search engine was used to gather information on teeth restricted to a 5-year period (26 August 2018 to 25 July 2022). Only English-language studies and reviews with the best balance of sensitivity and specificity were considered. A Boolean search of the PubMed dataset was implemented to combine a range of keywords: ("tooth wear" OR tooth attrition OR tooth erosion OR tooth abrasion OR tooth abfraction). Additional articles were selected through Google Scholar., Results: By this process, many articles and studies were obtained, and the 48 most relevant published studies were chosen and used in the current review., Conclusion: Tooth wear affects an increasing number of individuals and can have detrimental effects physically, mentally, and emotionally. It is important to stress early diagnosis and management of tooth wear through monitoring, prevention, and treatment where indicated.

Objectives: The aim of this study was to evaluate the amount of enamel tooth wear induced by different antagonistic ceramic crown materials in the posterior area within a follow-up period up to 24 months in function. A network meta-analysis was performed to assess the effect of the materials on the mean vertical loss (MVL) of the antagonist enamel tooth surface., Data: Main search terms used in combination: ceramic, dental materials, metal ceramic, tooth wear and dental enamel., Sources: An electronic search was conducted in PubMed/Medline, Embase, and Cochrane CENTRAL plus hand-searching., Study Selection: Eligibility criteria included clinical studies reporting on MVL on antagonist's tooth up to 24 months following the permanent crown placement. From a total of 5697 articles, 7 studies reporting on 261 crowns for 177 subjects with 3 ceramic materials (Lithium disilicate, metal-ceramic, monolithic zirconia) were included. Among all, metal-ceramic and zirconia caused significantly higher enamel tooth wear on antagonist teeth, representing 82.5 µm [54.4; 110.6]) and 40.1 µm [22.2; 58.0]) more MVL than natural teeth group. In contrast, lithium disilicate showed only 5.0 µm [-48.2; 58.1]) more MVL than occurs on opposing natural teeth., Conclusions: This systematic review demonstrated that prosthodontic ceramic materials produced significantly more antagonist enamel tooth wear than opposing natural enamel tooth wear, and ceramic material type was correlated to the degree of enamel tooth wear. Additional well-conducted, randomized controlled trials with homogeneous specimens are required due to inadequate sample size and number of the clinical studies included in the analyses., Clinical Significance: The amount of wear caused by different restorative materials has a high influence on the antagonistic natural teeth and should therefore be evaluated intensively by the dentist., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

Background: Tooth wear (TW) prevalence is high and increasing and has important consequences on the patient's quality of life. Knowledge of risk factors is crucial to promote diagnosis, prevention strategies and timely interceptive treatment. Many studies have identified TW risk factors., Objective: This scoping review aims to map and describe suspected available factors associated with TW in permanent dentition based on quantitative measurement., Methods: The scoping review was conducted using the PRISMA extension of the Scoping Reviews checklist. The search was conducted in October 2022 from the Medline® (PubMed® interface) and Scopus® databases. Two independent reviewers selected and characterised the studies., Results: 2702 articles were identified for assessment of titles and abstracts, and 273 articles were included in the review. The results show a need to standardise TW measurement indices and the study design. The included studies highlighted various factors, classified into nine domains: sociodemographic factors, medical history, drinking habits, eating habits, oral hygiene habits, dental factors, bruxism and temporomandibular disorders, behavioural factors, and stress. Results related to chemical TW (erosion) risk factors underline the importance of eating disorders, gastroesophageal reflux and lifestyle, particularly drinking and eating behaviours, which supports developing public health information campaigns and interventions. Besides chemical, this review identifies evidence of several mechanical TW risk factors, such as toothbrushing and bruxism; the influence of this last factor needs to be further explored., Conclusions: TW management and prevention require a multidisciplinary approach. Dentists are in the first line to detect associated diseases such as reflux or eating disorders. Consequently, practitioners' information and guideline diffusion should be promoted, and a TW risk factors checklist (the ToWeR checklist) is proposed to help diagnostic approaches., (© 2023 John Wiley & Sons Ltd.)

Objectives: This study compared the surface change on natural and polished enamel exposed to a joint mechanical and chemical wear regimen., Methods: Human enamel samples were randomly assigned to natural (n = 30) or polished (n = 30) groups, subjected to erosion (n = 10, 0.3% citric acid, 5 min), abrasion (n = 10, 30 s), or a combination (n = 10). Wear in the form of step height was measured with a non-contact profilometer, and surface changes were inspected with SEM on selected sections. Data was normalised and underwent repeated measures MANOVA, accounting for substrate and erosive challenge as independent variables, with Bonferroni correction for significant post hoc interactions., Results: After four cycles, polished samples had mean step heights of 3.08 (0.40) μm after erosion and 4.08 (0.37) μm after erosion/abrasion. For natural samples, these measurements were 1.52 (0.22) μm and 3.62 (0.39) μm, respectively. Natural surfaces displayed less wear than polished surfaces under erosion-only conditions (p<0.0001), but the difference disappeared with added abrasion. SEM revealed a shallow subsurface layer for polished surfaces and natural ones undergoing only erosion. However, natural surfaces exposed to both erosion and abrasion showed deeper subsurface changes up to 50 µm., Conclusion: Natural enamel, when exposed to erosion alone, showed less wear and minimal subsurface alterations. But with added abrasion, natural enamel surfaces saw increased wear and notable subsurface changes compared to polished ones., Clinical Significance: The pronounced subsurface lesions observed on eroded/abraded natural enamel surfaces highlight how combined wear challenges may accelerate tooth tissue loss., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing interests or personal relationships that has influenced the work presented in this paper. The authors would like to acknowledge the BBSRC iCase (Grant No. BB/M009513/1) award with Unilever Oral Care (Grant No. MA-2019–0247 N) for their support., (Crown Copyright © 2023. Published by Elsevier Ltd. All rights reserved.)

Background: Pathological tooth wear is an increasing concern and may require intervention and occlusal rehabilitation. Often the treatment includes distalisaton of the mandible to restore the dentition in centric relation. Obstructive sleep apnoea (OSA) is another condition treated my mandibular repositioning but in this case by an advancement appliance. The authors have a concern that there could be a group of patients with both conditions where distalisation for their tooth wear management would be contrary to their OSA treatment. This paper aims to look at this potential risk., Methods: A literature search was carried out using the following keywords (OSA or sleep apnoea or apnea or snoring or AHI or Epworth score) and for tooth surface loss (TSL or distalisation or centric relation or tooth wear or full mouth rehabilitation)., Results: No studies were identified which considered the effect of mandibular distalisation on OSA., Conclusion: There is a theoretical risk that dental treatment involving distalisation may adversely affect patients at risk of OSA or worsening their condition due to the modification of airway patency. Further study is recommended., (Copyright© 2023 Dennis Barber Ltd.)

Background: Most studies support parafunctions play an important role in temporomandibular disorders (TMD), whereas the association between tooth wear and TMD remains controversial. Betel nut chewing as a parafunction is popular in South and Southeast Asia. We therefore investigated the association of severely worn dentition resulting from betel nut chewing with TMD., Methods: A cross-sectional analysis of 408 control participants (male: 380, female: 28, 43.62 ± 9.54 years) and 408 participants with betel nut chewing related severely worn dentition (male: 380, female: 28, 43.73 ± 8.93 years) who received dental and TMD checkup according to Diagnostic Criteria for Temporomandibular Disorders (DC/TMD) in Health Management Center, Xiangya Hospital was performed. Betel nut chewing related severely worn dentition meant all the natural teeth had moderate to severe tooth wear [Tooth Wear Index (TWI) ≥ 2)] including ≥ 2 severe wear teeth (TWI ≥ 3) due to betel nut chewing. Multivariable logistic regression analysis was used., Results: After adjusting for age, gender, betel nut chewing related severely worn dentition, oral submucosal fibrosis, number of missing teeth, number of dental quadrants with missing teeth, visible third molar and orthodontic history, variables of age, gender and betel nut chewing related severely worn dentition were significant for overall TMD. Multivariable analysis showed betel nut chewing related severely worn dentition was significantly associated with intra-articular TMD [odds ratio and 95% confidence intervals: 1.689 (1.271-2.244), P = 0.001] in a betel nut chewing dose-dependent manner., Conclusion: Betel nut chewing related severely worn dentition was associated with intra-articular TMD., (© 2023. The Author(s).)

Objectives: Tooth wear causes irreversible cumulated surface loss and already occurs at a young age. Therefore, the objective of this clinical prospective observational study was to monitor the occlusal surface of a mandibular first molar in young adults for a period of 24 months. Furthermore, potential aetiological factors obtained by a questionnaire were considered., Materials and Methods: The study teeth (FDI #36 or #46) of 81 participants (mean age 22.8 ± 2.2 years) were scanned with the intraoral scanner (IOS, Trios 3, 3Shape) at the second follow-up (T2) after an observation period of 24 months. Standard-tessellation-language datasets were superimposed with baseline (T0) and T2 scans in 3D analysis software (GOM Inspect). The maximum vertical substance loss was measured between T0 and T2 at 6/7 areas (4/5 cusps and 2 ridges) of each study tooth and data compared to the already published data of the first follow-up (T1) after 12-month observation period. The morphology of tooth wear was classified into three groups: cupping (C), facet (F) and combined cupping-facet (CF). The analysis of aetiological factors, such as acid impacts, was based on a questionnaire filled out by participants at time points T0, T1 and T2. Non-parametric tests were used for statistical analysis (p < 0.05)., Results: The buccal load-bearing cusps (mesiobuccal: median 15 μm, 95%CI 11/18 μm; mesiolingual 8 μm, 0/11 μm) were most affected by tooth wear. Loss values increased significantly at T2 compared to T1 for all areas, although significantly less than in the first 12 months (T0-T1). Areas that already exhibited F at T0 mostly displayed them also at T2 and only rarely developed further into C or CF. The only association between aetiological factors and loss values could be detected for sex as males had significantly higher loss values than females., Conclusions: Progression of tooth wear could be clearly shown with high interindividual variations in loss values among participants. This indicates the need for individual monitoring with IOS., Clinical Relevance: IOSs show the potential for patient-specific monitoring to detect the progression of tooth wear. Thus, data of 24 months fills the gap of tooth wear data for young adults in literature. Further studies over a longer observation period are highly recommended to gain more information about the dynamic of tooth wear and aetiological factors., (© 2023. The Author(s).)

Background: The aim of this study was to analyse the relationship between the type and amount of fluid intake and the incidence of erosive tooth wear in a group of healthy children and children with disabilities. Methods: This study was conducted among children aged 6-17 years, patients of the Dental Clinic in Kraków. The research included 86 children: 44 healthy children and 42 children with disabilities. The prevalence of erosive tooth wear using the Basic Erosive Wear Examination (BEWE) index was assessed by the dentist, who also determined the prevalence of dry mouth using a mirror test. A qualitative-quantitative questionnaire on the frequency of consumption of specific liquids and foods related to the occurrence of erosive tooth wear, completed by the children's parents, was used to assess dietary habits. Results: The occurrence of erosive tooth wear was determined for 26% of the total number of children studied, and these were mostly lesions of minor severity. The mean value of the sum of the BEWE index was significantly higher ( p = 0.0003) in the group of children with disabilities. In contrast, the risk of erosive tooth wear was non-significantly higher in children with disabilities (31.0%) than in healthy children (20.5%). Dry mouth was significantly more frequently identified among children with disabilities (57.1%). Erosive tooth wear was also significantly more common ( p = 0.02) in children whose parents declared the presence of eating disorders. Children with disabilities consumed flavoured water or water with added syrup/juice and fruit teas with significantly higher frequency, while there were no differences in quantitative fluid intake between groups. The frequency and quantity of drinking flavoured waters or water with added syrup/juice, sweetened carbonated, and non-carbonated drinks were associated with the occurrence of erosive tooth wear for all children studied. Conclusions: The group of studied children presents inappropriate drinking behaviours regarding the frequency and amount of beverages consumed, which, especially in a group of children with disabilities, may contribute to the formation of erosive cavities.

Although we are increasingly recognising the need to assess patients for accelerated rates of tooth wear progression, it is often difficult to do so within a feasible diagnostic window. This paper aims to provide evidence-based timelines which a diagnosing clinician can expect to assess tooth wear progression in study models, clinical indices, clinical photographs and visually with intraoral scans. It also discusses new technologies emerging for the quantitative assessment of tooth wear, timelines for diagnosis, and caveats in the 3D scan registration and analysis process., (© 2023. The Author(s).)

Tooth wear is a commonly reported finding globally; however, many patients are unaware of having tooth wear. Identifying early signs of erosion, abrasion or attrition and determining the risk factors contributing to a patient's tooth wear may help to prevent further loss of enamel and dentine in the future. Appropriate prevention should be instigated, or appropriate referral made to other health professionals, when conditions such as gastroesophageal reflux or eating disorders are suspected. This paper presents the epidemiology and aetiological factors for tooth wear, as well as identifying the common clinical presentations of tooth wear. Patient perspectives on tooth wear and preventive techniques that can be utilised are also discussed., (© 2023. The Author(s), under exclusive licence to the British Dental Association.)

Gastro-oesophageal reflux disease (GORD) is a relatively common condition that occurs in adults and less commonly in children. It develops when the reflux of stomach contents into the oesophagus causes troublesome symptoms and/or complications. Signs and symptoms include heartburn, retrosternal discomfort, epigastric pain and hoarseness, dental erosion, chronic cough, burning mouth syndrome, halitosis and laryngitis. A proportion of patients will, however, have silent reflux. Strongly associated risk factors include family history, age, hiatus hernia, obesity and neurological conditions, such as cerebral palsy. There are different treatment options which may be considered for GORD, consisting of conservative, medical and surgical therapy. Dentists should be aware of the symptoms of GORD and dental signs of intrinsic erosion indicative of possible GORD so that they can question patients about this and, if appropriate, initiate a referral to a general medical practitioner., (© 2023. The Author(s).)

Objectives: To investigate the prevalence of tooth wear and associated factors in adults from the 1982 Pelotas Birth Cohort., Methods: A subsample of the 5,914 individuals from the 1982 Pelotas Birth Cohort was randomly selected to be interviewed and clinically examined at the age of 31. Tooth wear was evaluated using a simplified version of the Tooth Wear Index (TWI), considering the absence or presence of tooth wear in dentin of first molars and anterior teeth (incisors and canines). Independent variables were socioeconomic, demographic, unhealthy behavior, and mental health. Crude and adjusted Poisson regression models were employed. A significant level of P ≤ 0.05 was adopted., Results: A total of 537 individuals were evaluated. A tooth wear prevalence of 61.6% was observed. Females presented a statistically significant lower tooth wear in dentin prevalence ratio (PR) compared to males in the adjusted analysis (PR 0.76; 95% CI: 0.67-0.86). Acid beverage consumption (PR 1.22; 95% CI: 1.01-1.49) and consumption of alcoholic beverages (PR 1.19; 95% CI: 1.04-1.35) were positively associated with tooth wear., Conclusion: Almost 2/3 of the surveyed individuals presented tooth wear in dentin. Being a male, higher consumption of alcohol and acidic beverages were factors associated with tooth wear., Clinical Significance: There was a high prevalence of tooth wear in dentin in the adult population. Data has also shown the etiological complexity of tooth wear, reinforcing the importance of an early diagnosis and the establishment of preventive measures to decrease the potentially hazardous effect of tooth wear over time., Competing Interests: Declaration of interests The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Objectives: Erosive tooth wear (ETW) is defined as the irreversible chemo-mechanical loss of dental hard tissues without plaque or bacteria and has been a growing phenomenon in the general population worldwide. The aim of this study was to determine the prevalence of ETW and the associated risk factors among young military personnel in Singapore., Materials and Methods: This cross-sectional study consisted of a questionnaire and clinical examination of military personnel between 18 and 25 years. The questionnaire collected information on demographics, medical and dental history, lifestyle and dietary habits. Tooth wear was clinically evaluated using the Basic Erosive Wear Examination (BEWE) index. The participants were profiled into four risk categories (none, low, moderate, severe) based on the sum score. Multivariable logistic regression analysis was performed to determine the risk factors associated with the presence of ETW., Results: Out of 1296 participants evaluated, 21.8% of them had ETW. The anterior sextants were more affected by erosion than posterior sextants for both arches. The risk factors significantly associated with ETW were GERD (OR = 2.83, p = 0.041), presence of self-reported TMD symptoms (OR = 2.51, p < 0.001), acidic food (OR = 2.03, p < 0.001) and drinks (OR = 3.07, p < 0.001), high caries risk (OR = 4.59, p < 0.001) and toothbrush stiffness (OR = 4.67, p < 0.001)., Conclusion: ETW is prevalent among the young military population, with over half of the population at a risk of ETW. Gastric reflux disease, TMD, acidic diet, dental caries susceptibility and the use of stiff toothbrushes were identified as significant risk factors., Clinical Relevance: A large proportion of young military personnel exhibited mild to moderate risk of ETW. Dental professionals can identify risk-susceptible individuals at a young age and educated them with preventive measures and dietary interventions to prevent the progression of the condition., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Objectives: The aim of this study was to determine predictors of erosive tooth wear (ETW) progression, using novel primary-care quantitative analysis techniques., Methods: In a single-centre, prospective, observational cohort longitudinal study, adolescents, aged 11-18 years, underwent a baseline BEWE examination, validated risk factors questionnaire and baseline intraoral scan (IOS, TRIOS 3.0, 3Shape, Copenhagen, Denmark). One year later a repeat scan was taken. Quantitative analysis of wear progression (volume loss) on first permanent molars and upper central incisors was performed using previously published protocols. Multilevel linear regression was used to investigate the associations between baseline predictors and volume loss per mm 2 ., Results: A total of 295 dental surfaces (131 incisors and 164 molars) in 70 patients were analysed for this study. The mean age of participants at baseline was 15.0 years (SD: 0.79), and the average time between scans was 11.8 months (1.61 SD; range 10-13). The mean volume loss per mm 2 of dental surfaces was -0.013 mm 3 (SD: 0.009). Greater volume loss was observed amongst adolescents with higher baseline BEWE scores and those whose parents had lower education as well as on molar than incisor surfaces. No associations were found with dietary acid intake and intrinsic acid exposure when baseline levels of tooth wear, parental education and other factors were controlled for., Conclusions: The findings help to characterise groups at greater risk of ETW and would indicate that improved screening and upstream preventative measures should form the basis of a preventative program., Clinical Significance: Intra-orals scans and registration software might improve the ability to diagnose, monitor and prevent the early loss of dental hard tissue., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Among the different factors thought to affect dental wear, dietary consistency is possibly the least investigated. To understand tooth wear of herbivorous animals consuming different dietary consistencies with different abrasive potential, we fed 14 rabbits (Oryctolagus cuniculus) exclusively with a timothy grassmeal-based diet in either pelleted or extruded form, or the same diets with an addition of 5% fine sand abrasives (mean size 130 µm). First, we offered the rabbits the pelleted and extruded diets as well as the pelleted control and pelleted abrasive diet in a two-stage preference experiment. Then, the rabbits received each diet for 2 weeks in a randomised serial feeding experiment, where each animal served as its own control. Tooth measurements for wear, growth and height were achieved using a manual calliper, endoscopic examination and CT scans. The analysis of the diets as fed showed almost identical mean particle size, but the extruded diet had a lower density (volume/mass) and softer consistency compared to the pelleted one and was favoured by most rabbits. The rabbits selected against the diet with sand during the preference experiment, possibly because it caused more tooth wear, especially on the teeth most exposed to wear along the upper tooth row (upper P4 and M1). The maxillary teeth also showed evidence of an increased chewing laterality by the end of the experiment. The extruded diet led to a significantly lower cheek teeth height than the pelleted diet, potentially due to the higher chewing effort needed for a similar dry matter intake. The results suggest that dietary hardness alone is a poor predictor of dental wear. The regrowth of the teeth matched wear consistently., (© 2021 Wiley-VCH GmbH.)

Objectives: The aim of this study was to assess the relationship between erosive tooth wear (ETW) and possible etiological factors in a group of dental students., Materials and Methods: A total of 126 dental students from a public dental school were included in this study. A questionnaire was used to investigate the possible etiological factors related to ETW. The Basic Erosive Wear Examination (BEWE) criteria were used to examine the status of ETW. A univariable and multivariable logistic regression models were used to assess the relationship between the presence of ETW and explanatory variables., Results: Univariable analysis revealed that taking acidic foods and alcohol more than 4-5 times per week increases the odds of ETW by 6.043 and 2.532 times, respectively, and taking dairy products, fruit juice, and milk more than 4-5 times per week decreases the likelihood of ETW by 61%, 66%, and 80%, respectively. The results of multivariable regression analysis showed that the frequency of consumption of especially acidic foods significantly increased the risk of ETW (OR = 9.981, 95% CI 3.577-27.849, p < 0.001)., Conclusions: Although the ETW status of dental students, who are the future dentists, varies depending on different possible etiological factors, especially the consumption of acidic foods has increased the risk of ETW approximately 10 times., Clinical Relevance: The findings highlight the high relevance of ETW, especially with acidic food consumption, and the importance of controlling potential etiological factors in dental students., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Objective: To validate a questionnaire for the identification of factors associated with erosive tooth wear (ETW) in adolescents., Materials and Methods: Based on previous questionnaires, a 73-question instrument was designed (four domains: socio-demographics, general/oral health history, diet and oral care habits). Content validity was assessed by five external experts, and the questions' understandability was evaluated in a pilot study (10 adolescents). Three internal experts agreed on modifications. Construct validity was assessed after the resulting questionnaire was applied to 454 12- to 15-year olds from Bogotá (Colombia). Statistical analyses included exploratory factor analysis (EFA), internal consistency, and confirmatory factor analysis (CFA)., Results: After the content validation, 52% of the questions were excluded and remaining 38 questions were adjusted. Construct validation: The EFA resulted in the regrouping of questions into the three remaining domains (KMO = 0.68; Bartlett's test: p < 0.001). Internal consistency was good (general questionnaire Cronbach's α = 0.67; individual factors' Cronbach's α = 0.30-0.69; ICC = 0.39-0.62; p < 0.001), and the model showed satisfactory fit. CFA showed good convergent and discriminatory validity suggesting the elimination of 14 additional questions (χ 2  = 238.518; p > 0.086; CFI = 0.96; TLI = 0.95; RMSEA = 0.017; PRATIO = 0.76). The final validated questionnaire comprised 24 questions (general/oral health history: n = 5; dietary habits: n = 15; oral care habits: n = 4)., Conclusion: The validation of the ETW questionnaire for adolescents was satisfactory and resulted in a short applicable questionnaire version., Clinical Relevance: This study achieved a satisfactorily validated, short, and applicable questionnaire for assessing erosive tooth wear risk factors in adolescents, recommended for the clinical practice, research, and epidemiology., (© 2021. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Objective: An assessment was performed to identify and evaluate dental enamel wear caused by monolithic zirconia restoration. Literature searches were conducted in PubMed, Science Direct, Cochrane Evidence, and the Cochrane Library up to May 2020., Material and Methods: Studies were selected for systematic review according to the inclusion (articles conducted on the wear of enamel samples opposing monolithic zirconia) and exclusion (case reports, non-English articles, and monolithic zirconia samples facing other materials rather than human enamel) criteria. Of those, articles on polished and glazed monolithic zirconia subjected to a 50 N vertical load with a range of 240,000-250,000 cycles, equivalent to 1 year of in vivo mastication, were included in the meta-analysis., Results: In total, 3968 articles were pooled. Twenty-five articles met the inclusion criteria for the systematic review. Three studies were included in the meta-analysis. The results showed that the enamel wear against monolithic zirconia was within the statistically accepted level. Moreover, the polished monolithic zirconia surface caused less enamel wear than the glazed surface., Conclusion: This review indicates that monolithic zirconia restorations cause acceptable antagonist enamel wear. Moreover, the meta-analysis results agreed that the final restoration's surface texture plays an essential role in the wear process., Clinical Significance: Monolithic zirconia restorations have been widely used in dental practice because they eliminate the chipping problems resulting from using veneered restorations. With recent technology development, monolithic zirconia has obtained more esthetic features and a more natural look. However, due to the high strength and surface roughness of monolithic zirconia, wear on the antagonist's teeth was detected. The results showed that this wear amount was statistically acceptable and lower than other ceramics such as feldspathic porcelain and enamel. Furthermore, surface treatment methods must be applied to minimize tooth wear, as polished or glazed surfaces interfere with enamel loss., (© 2021 Wiley Periodicals LLC.)

Purpose: The aim of this prospective study was to evaluate the clinical performance of minimally invasive, CAD/CAM nano-ceramic (composite) restorations in patients with severe tooth wear, the effect of the restorative treatment on the oral health-related quality of life (OHRQoL), and the etiology of tooth wear as a risk factor for restoration failure., Materials and Methods: Patients with generalized severe tooth wear were included. Restorations (LAVA Ultimate, 3M Oral Care) were cemented (RelyX Ultimate, 3M Oral Care) on all teeth and were evaluated after 1 month and 1 year. OHRQoL was assessed via questionnaires at baseline and after 1 year. Differences were evaluated (paired t-test). Two mechanical tooth-wear lesions resulting from tooth-tooth contact, and 3 chemical tooth wear lesions resulting from intrinsic or extrinsic acids dissolving natural hard tooth substance, were evaluated to assess the etiology of tooth wear in association with restoration failure using multilevel logistic regression analyses (p < 0.05)., Results: Twenty-one patients (age: 41.7 ± 10.4 years) were evaluated after 1 year (13.5 ± 1.2 months). 568 indirect CAD/CAM restorations were placed. None were replaced or lost. Twelve were repaired and 10 were refurbished. Success rates were 100% to 97.2%. Questionnaires showed a significant positive impact of the treatment on OHRQoL (p < 0.001). The presence of mechanical lesions did not pose a higher risk for restoration failure (p = 0.78). The presence of chemical lesions showed a lower risk of restoration failure (p = 0.002)., Conclusion: The use of minimally invasive, CAD/CAM nano-ceramic (composite) restorations in the restorative treatment of severely worn dentitions showed satisfactory results in the short term.

Tooth wear is a relevant oral health problem, especially at a young age. Although ongoing acid exposures may contribute to tooth wear, the role of acidic dietary components in this context remains unclear. To date, in tooth wear studies, dietary behavior has been assessed using traditional questionnaires, but the suitability of this approach has not been investigated so far. In our longitudinal study, we followed 91 participants (21.0 ± 2.2 years) over a period of 1 year (373 ± 19 days) and monitored tooth wear with an intraoral scanner. At baseline (T0) and at the end (T1), we assessed dietary behavior with questionnaires asking about the consumption frequencies of acidic dietary components and the acid taste preferences. Complete data were available from 80 subjects. The consumption frequencies of T0 and T1 correlated weakly to moderately. Taste preferences seem to be a more consistent measure, but there was predominantly no significant correlation with the corresponding consumption frequencies. None of the dietary parameters showed a significant relation with tooth wear. The suitability of dietary questionnaires to assess tooth-relevant dietary behavior seems to be limited.

Objectives: To investigate tooth wear in young adults, intraoral scanning was used for digital monitoring of the mandibular first molar over 12 months. A possible influence of aetiological factors obtained by a questionnaire on tooth wear was investigated., Materials and Methods: A total of 109 participants (mean age at the start of the study: 21.0 ± 2.2 years) were included in this clinical study. At baseline (T0), an intraoral scan (Trios 3, 3Shape) of the study tooth (FDI # 36 or #46) was conducted. After a mean observation period of 373 ± 19 days, a second intraoral scan (T1, n = 94) of the same tooth as at T0 was performed and standard tessellation language datasets were superimposed with 3D analysis software (GOM Inspect). The occlusal surface of the study tooth was divided into 7 areas (5 cusps, 2 ridges) and maximum vertical substance loss was measured between T0 and T1 (n = 91). Three types of tooth wear were defined: cupping (C), facet (F) and combined cupping-facet (CF). Furthermore, a questionnaire on aetiological factors, such as dietary behaviour, was filled out at T0. Data were analysed with non-parametric tests (p < 0.05)., Results: Only one study tooth exhibited no tooth wear at T0, whereas 3 teeth showed C, 47 teeth F and 40 teeth CF. A progression of vertical substance loss for all three types was shown. Most affected were the mesiobuccal cusps (43, 38/47 µm; median, 95%CI) followed by distobuccal (36, 33/39 µm), mesiolingual (35, 26/40 µm), distolingual (34, 27/36 µm) and distal (31, 25/34 µm). On mesial and distal ridges, only F was detected with the lowest vertical substance loss of all areas (mesial ridge: 0, 0/0 µm; distal ridge: 0, 0/0 µm). An association between aetiological factors and loss values could not be shown., Conclusions: All study teeth showed clear signs of wear, and after only 1 year, further substance loss was detectable. This result is of significance for young adults., Clinical Relevance: Since data of young adults regarding tooth wear are scarce, the results give a first idea of the amount of vertical loss per year and its relation to aetiological factors such as dietary behaviour. Therefore, further studies over a longer observation period are highly recommended., (© 2021. The Author(s).)

The geometrical properties of toothbrushes play a role in developing abrasive tooth wear and non-carious cervical lesions. This study investigated the interplay between the toothbrush tuft arrangement (crossed vs. parallel) and bristle stiffness (soft vs. medium) on the abrasive dentin wear using three slurries with different levels of abrasivity (RDA: 67, 121 and 174). Twelve groups of bovine dentin samples (n = 20) were brushed with a combination of the aforementioned variables. Abrasive dentin wear was recorded with a profilometer and the resulting abrasive wear of each group was calculated and compared with each other using two-way ANOVA and pairwise tests. Toothbrushes with parallel tuft arrangement caused statistically significantly higher dentin wear compared to crossed tuft arrangement, regardless of the abrasivity level of the used slurry and the bristle stiffness. Soft crossed tuft toothbrushes caused statistically significantly higher abrasive dentin wear than medium crossed tuft toothbrushes, while soft and medium parallel tuft toothbrushes caused the same amounts of dentin wear, regardless of the RDA value of the used slurry. These results could be helpful for dentists and dental hygienists when advising patients. Crossed tuft toothbrushes could be a less-abrasive choice in comparison to parallel tuft toothbrushes., (© 2022. The Author(s).)

The aim of this study was to investigate the prevalence and severity of erosive tooth wear (ETW) among Finnish adolescents and to evaluate how frequency as well as amount of the use of erosive products is associated with ETW. The study population consisted of 328 voluntary, >15-year-old secondary school students (males 49.1%, females 50.9%) in three municipalities in Finland. Clinical examination to measure ETW (BEWE index) was carried out by trained and calibrated dentists. Piloted questionnaires included questions on consumption of drinks, fruits and berries, as well as tooth brushing frequency. Means and medians of frequencies and amounts of consumed erosive products were calculated and associations with ETW severity were analysed by logistic regression models. One-third (36.9%) of the participants were in need of at least preventive measures for ETW (BEWE sum score ≥3), but severe ETW (BEWE sum score >9) was rare (2.1%). Boys had severe ETW significantly more frequently than girls (p < 0.001). Habitual consumption of erosive drinks was common especially among boys compared to girls (p = 0.001). ETW was significantly associated with the amount of consumed erosive drinks, fruits, or berries. The prevalence of ETW among adolescences in Finland seems to be at the same level as in other Nordic and European countries. Consumption of erosive products is common and thus, the risk for tooth erosion is high, especially in boys. In addition to erosive drinks, also berries and fruits are associated with ETW and should be included in individual dietary counselling when early signs of ETW are clinically detected., (© 2022 The Author(s). Published by S. Karger AG, Basel.)

This study was undertaken to estimate the prevalence and severity of tooth wear (TW), as well as to assess non-biological and biological risk indicators for TW outcomes in adults. A cross-sectional study, adhering to the reporting STROBE guidelines, was conducted and had a convenience sample of adults ≥18 years of age who had at least one bilateral posterior molar contact. A total of 570 participants, seeking consultation at the University Hospital in Brussels, Belgium, were allocated to three age groups: 18-34 years (n = 232), 35-54 years (n = 256), and ≥55 years old (n = 79). Participants answered a self-applied questionnaire regarding sociodemographics, oral hygiene, and lifestyle behavior. The questionnaire was tested-retested (intraclass correlation coefficient = 0.71). Inter-examiner reliability for clinical examinations was k = 0.76-0.80. The prevalence of TW was 75% (95% CI: 71.7-78.9). Out of these patients, 42% (95% CI: 38.0-46.3) had as the primary etiological factor the process of dental erosion, while 22% (95% CI: 18.9-25.9) and 11% (95% CI: 8.6-13.9) had the processes of dental attrition and dental abrasion, respectively. The severity of TW according to BEWE highest score was mild in 31%, moderate in 28%, and severe in 17% of participants. The hierarchical logistic regression model for the association between risk indicators and TW irrespective of the etiology was significant for age (>35-54 years: OR = 2.35 and ≥55 years: OR = 3.89; p < 0.001), gender (>male: OR = 2.03; p < 0.001), toothpaste (>sensitive teeth: OR = 2.34; p = 0.005), occlusal splint (>yes: OR = 1.62; p = 0.03), and acidic beverages (≥once per day: OR = 1.62; p = 0.044). Consumption of acidic beverages was not associated with TW having as the primary etiological factor the process of dental attrition or dental abrasion, while it was significantly associated with the process of dental erosion (>once per week: OR = 1.69; p = 0.043 and ≥once per day: OR = 1.73; p = 0.016). Medical conditions were equally associated with the latter (OR = 3.11; p < 0.001). These findings could contribute to improving the effectiveness and sustainability of awareness in contemporary adult populations. In conclusion, the prevalence and severity of TW in adults were substantial. Medical conditions and consumption of acidic beverages were risk indicators for TW having as the primary etiological factor the process of dental erosion, although associations were moderate and weak, respectively., (© 2022 S. Karger AG, Basel.)

The following article deals with various considerations concerning the frequently observed occurrence of dental erosion in athletes. It summarizes the basics of erosive tooth wear development as well as special etiologic factors for groups of athletes with increased prevalence of dental erosion and concludes with preventive advice. (Originally published (in German) in Quintessenz Zahnmed 2021;72:1008-1017).

The aim of this study was to quantify and to compare the wear rates of premolar (PM) and molar (M) restorations of lithium disilicate ceramic (LS2) and an experimental CAD/CAM polymer (COMP) in cases of complex rehabilitations with changes in vertical dimension of occlusion (VDO). Twelve patients with severe tooth wear underwent prosthetic rehabilitation, restoring the VDO with antagonistic occlusal coverage restorations either out of LS2 (n = 6 patients, n = 16 posterior restorations/patient; N = 96 restorations/year) or COMP (n = 6 patients; n = 16 posterior restorations/patient; N = 96 restorations/year). Data was obtained by digitalization of plaster casts with a laboratory scanner at annual recalls (350 ± 86 days; 755 ± 92 days; 1102 ± 97 days). Each annual recall dataset of premolar and molar restorations (N = 192) was overlaid individually with the corresponding baseline dataset using an iterative best-fit method. Mean vertical loss of the occlusal contact areas (OCAs) was calculated for each restoration and recall time. For LS2 restorations, the mean wear rate per month over 1 year was 7.5 ± 3.4 μm (PM), 7.8 ± 2.0 μm (M), over 2 years 3.8 ± 1.6 µm (PM), 4.4 ± 1.5 µm (M), over 3 years 2.8 ± 1.3 µm (PM), 3.4 ± 1.7 µm (M). For COMP restorations, the mean wear rate per month over 1 year was 15.5 ± 8.9 μm (PM), 28.5 ± 20.2 μm (M), over 2 years 9.2 ± 5.9 µm (PM), 16.7 ± 14.9 µm (M), over 3 years 8.6 ± 5.3 µm (PM), 9.5 ± 8.0 µm (M). Three COMP restorations fractured after two years and therefore were not considered in the 3-year results. The wear rates in the LS2 group showed significant differences between premolars and molars restorations (p = 0.041; p = 0.023; p = 0.045). The wear rates in COMP group differed significantly between premolars and molars only in the first two years (p < 0.0001; p = 0.007). COMP restorations show much higher wear rates compared to LS2. The presented results suggest that with increasing time in situ, the monthly wear rates for both materials decreased over time. On the basis of this limited dataset, both LS2 and COMP restorations show reasonable clinical wear rates after 3 years follow-up. Wear of COMP restorations was higher, however prosthodontic treatment was less invasive. LS2 showed less wear, yet tooth preparation was necessary. Clinicians should balance well between necessary preparation invasiveness and long-term occlusal stability in patients with worn dentitions.

Objective: This study evaluates the correlations amongst mandibular torus, palatine torus, oral exostoses to dental wear/loss and temporomandibular damage., Methods: The sample consists of 504 skulls from the Hamann-Todd Osteological Collection; 223 African American and 281 European Americans aged between 30 and 80 years. The sample was analyzed using Pearson's Chi-square for significance of sex, age, ancestry, and wear as well as the interactions between the demographic variables and the presence of mandibular torus, palatine torus and oral exostoses., Results: Wear was statistically significant by age and sex but not ancestry. The maxillary exostoses varied significantly by age, ancestry and wear but not sex. Mandibular torus frequencies varied significantly by wear, sex and ancestry. The palatine torus varied significantly across wear groups, sex and ancestry., Discussion: The etiology of nonmetric oral cavity characteristics, mandibular torus, palatine torus and oral exostosis, is complex. The degree to which traits' presence and expression is the result of genetic and environmental interactions is not fully understood. More than age, sex or ancestry, the degree of dental wear and tooth loss influences the presence and expression of the oral cavity traits. The sample can be characterized as the presence of exostoses in higher frequencies in young African American males with little tooth loss. Males of both ancestral groups with heavy wear have higher frequencies of mandibular tori than females. The palatine torus is more common in edentulous European American females., (© 2020 Wiley Periodicals, Inc.)

Background: Tooth wear is the loss of tooth structure from physical or chemical attack of nonbacterial origin. Predominant causative factor for tooth wear in primary dentition is erosion. This study was conducted to assess the prevalence of tooth wear and its associated factors in primary dentition., Methods: Analytical cross-sectional study was conducted after obtaining ethical approval among 425 children aged two to 12 years, enrolled in different preschools/schools located in Kathmandu valley. Informed consent from parents as well as assent from children were obtained. Oral examination for assessing tooth wear was done using Smith and Knight Tooth Wear Index. Self-administered questionnaires were sent to parents for considering the factors associated with tooth wear. Data were entered in Microsoft Excel Sheet and analysed in Statistical Package of Social Sciences. The chi-square/fisher's exact test was done to establish the association between tooth wear and various factors., Results: Among total participants, 295 (69.4%) had tooth wear in at least one or more teeth. Tooth wear was seen significantly higher in children with increasing age (p<0.001). It was significantly associated with brushing technique (p=0.022), type of toothbrush (p=0.005), increasing duration of bottle feeding (p=0.003), in children frequently taking sour food stuffs (p=0.019) and soft drinks/juices (p<0.001)., Conclusions: Prevalence of tooth wear was high in primary dentition that increased with age. The condition was significantly associated with type of brushing technique, brushing frequency, materials used and type of diet. Tooth wear is a major problem in young age group having multifactorial etiology. It may lead to dental hypersensitivity and pulpal involvement if not followed up in early stages.

Erosive tooth wear is the classic gene-environmental model. It requires the exposure to acids, typically from the diet or from the gastric content of the host, and shows variation among individuals and populations, which suggests it to be determined by more than one gene, each with small individual effects. This genetic component is not easily studied since a precise assessment of acidic exposure is complicated. In humans, this is commonly done by self-reported data. In this chapter, evidence is discussed that supports the assumption that a genetic component exists, inspecting data from wine tasters, and ex vivo experiments combining different dental enamel specimens and saliva compositions. These data can be found "hidden" in reports that do not directly deal with individual susceptibility to erosive tooth wear., (© 2022 S. Karger AG, Basel.)

Non-carious dental lesions such as developmental defects of enamel (DDE) and erosive tooth wear (ETW) are the subject of intensive research. This paper aims to give perspectives on both DDE, including dental fluorosis and molar incisor hypomineralization (MIH), and ETW, presenting epidemiological data from the Americas and associated diagnostic aspects. Besides, it is important to present evidence to guide the clinical assessment process, supporting the clinicians' management decisions towards better oral health of their patients. The overall increase in the worldwide prevalence of non-carious lesions discussed in this this paper may reflect the need of perceptual changes. Although the number of publications related to these conditions has been increasing in the last years, there is still a need for clinical diagnostic and management awareness to include these conditions in routine dental practice. Besides, it is important to provide recommendations for standardized clinical assessment criteria, improving the process and helping clinicians' adherence. In this sense, this paper discusses the most commonly implemented indices for each condition. Thus, despite the wide range of diagnostic indices, BEWE is proposed to be the index recommended for ETW assessment, Dean or Thylstrup & Fejerskov indices for fluorosis and preferably the EAPD criteria (or modified DDE index) for MIH. Overall, non-carious lesions are a growing concern, and it is important to implement preventive measures that control their severity and progression, and accurate diagnosis by the dental clinician., (© 2021 S. Karger AG, Basel.)

Purpose: In a cross-sectional population-based study of 888 5-year-old preschoolers from Teresina, Brazil, to determine the prevalence and factors associated with erosive tooth wear (ETW)., Materials and Methods: In a questionnaire, parents provided information on sociodemographic factors, their children's eating/drinking habits, and oral health. Dental examination was performed at the schools by two calibrated examiners for the diagnosis of ETW, following the criteria of the modified O'Brien Index., Results: The prevalence of ETW was 3.3%. The maxillary incisors were the most highly affected teeth, followed by the mandibular and maxillary molars. The majority of the lesions reached only the enamel (72.1%) and up to 1/3 of the dental surface (63.1%). The occlusal surface was the most affected (47.8%). Preschoolers who had an acidic food-consumption profile had a 2.74 times (95% CI = 1.03-7.30) higher chance of having ETW than children without this profile., Conclusion: The prevalence of erosive tooth wear on the deciduous teeth was low and associated with the consumption of acidic beverages.

Objectives: To compare the prevalence of parafunctional habits, erosive tooth wear and occurrence of tooth injuries among children being under the care of Social Welfare Centre and children treated in the Department of Children's Dentistry of the Medical University of Warsaw., Study Design: The study contains environmental and medical interviews, record-based analysis and clinical examination. Parafunctional habits were rated on the base of dental interviews and clinical examinations. The occlusal surfaces were evaluated by visual examination using modified tooth wear index (TWI). Tooth injuries were reported from a medical interview labeled using Andreasen classification. The consent of the bioethics committee and guardians of children participated in the study was obtained., Results: The study involved 782 patients, including 404 children from dysfunctional families (average age 11,4 ± 3,7) and 378 from ordinary families-control group (8,53 ± 3,92). In the study group we observed higher prevalence of erosive tooth wear (44,66% vs 18,02% p=0,000), dental trauma (9,4% vs 3,44% p=0,001) and a presence of parafunctional habits (67,8% vs 20,4 % p=0,000)., Conclusion: The occurrence of parafunctional habits, erosive tooth wear and tooth injuries may be an indicator of domestic violence and a component of maltreated child syndrome., (© 2020 Clinical Pediatric Dentistry.)

Objectives: This study was conducted to examine the tooth wear status of nasopharyngeal-carcinoma (NPC) patients who had received radiotherapy at least 5-year previously, and to investigate the salivary parameters that may be associated with the tooth wear., Methods: Tooth wear status of NPC survivors were clinically assessed using the Exact Tooth Wear Index. A tooth was graded to have severe wear when more than one-third of its buccal/occlusal/lingual surface had dentine loss. At the subject-level, percentages of anterior/posterior/all teeth with severe wear were calculated. Age, number of teeth, flow-rate/buffering capacity/pH of stimulated whole (SWS) and parotid (SPS) saliva's were collected. Correlation and multiple-linear regression tests were performed at the significance level α = 0.05., Result: Sixty-eight participants (mean age of 60.0 ± 8.9), 697 anterior and 686 posterior teeth were examined with a mean of 10-years post-radiotherapy. Severe tooth wear was found in 63 (92.6 percent) participants, 288 anterior and 83 posterior teeth. The mean percentage of anterior/posterior/all teeth with severe wear were 42.3 ± 28.1, 14.5 ± 19.9 and 30.0 ± 21.7. Anterior teeth, particularly the incisal surface of central incisors were most affected. The mean flow-rate of SWS and SPS were 0.1 ± 0.1 ml/min and 0.03 ± 0.07 ml/min respectively. Thirty (44.1 percent) and 48 (70.6 percent) participants were found to have low/no buffering capacity of SWS and SPS respectively. Multiple-regression analyses revealed the SWS flow-rate was associated with the percentage of anterior teeth with severe wear (p=0.03)., Conclusion: Anterior tooth wear is a significant dental problem among NPC survivors and was associated with hypo-salivation., Clinical Significance: Patients with hypo-salivation should be being monitored for tooth wear particularly on the anterior teeth., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

The objective of the study was to analyze the surface area (SA) of the wear caused by simulated chewing on human enamel and opposing restorative material, namely: composite resin (CR), porcelain fused to metal (PFM), lithium disilicate (LD), or monolithic zirconia (MZr). Forty-eight premolars were selected as enamel specimens and divided randomly into 4 groups (n = 48; n =12) used as antagonists in chewing simulation (250,000 loading cycles) against one of the four selected test materials. Enamel and material specimens were scanned and evaluated under digital microscope, and wear SA (mm2) were recorded. Descriptive statistics, paired t-test, one-way ANOVA, and post-hoc Tukey-HSD tests were used for statistics (p < 0.05). The smallest and largest SA were exhibited by enamel against LD (0.80 mm2) and PFM (1.74 mm2), respectively. PFM (3.48 mm2) showed the largest SA and CR (2.28 mm2) showed the smallest SA. Paired t-test for SA values showed significant difference (p < 0.05) in all wear comparisons between materials and enamel antagonists. The wear of materials were greater than that of their respective enamel antagonists (p < 0.05). One-way ANOVA of the logarithmic means of wear SA revealed significant differences (P<0.05). Post-hoc Tukey test revealed significance for PFM (p < 0.05) with other materials. Wear of all test materials was greater compared to the wear of enamel antagonists. PFM and LD caused the largest and the smallest enamel wear, respectively. CR, LD, and MZr are more resistant than PFM to wear after simulated chewing against enamel.

This study investigated the impact of estimated age, anatomical location, and the presence of wear facets on the susceptibility of enamel to develop caries-like lesions. Extracted human premolars (n = 261) had their age estimated between 10 and 93 years old, using established forensic methods. Specimens of enamel (4 × 4 mm) were prepared from the middle of the buccal surfaces, preserving the outer surface layer. The central area of the block (4 × 1 mm) was protected with nail polish and used as an internal control. The specimens were demineralized for 8 days (with 0.1 M acetic acid, 1.28 mM Ca, 0.74 mM Pi, and 0.03 µg F/mL, pH 5.0), to simulate caries-like lesion development. They were then scanned individually using microtomography, and digital 2D images were used to calculate the outcomes of integrated mineral concentration loss (ΔZ in µm/g/cm3) and lesion depth (LD in µm) at 3 locations, i.e., the cervical, middle, and occlusal thirds. The presence of natural surface wear facets was considered in the analysis. Data were evaluated using a linear mixed-effects models (α = 0.05). ΔZ increased significantly as a function of estimated tooth age at all 3 locations, and this increase was greater after the age of 30 years (p < 0.001), when a higher ΔZ was found in the occlusal third than in the middle and cervical thirds (p < 0.001). LD increased only in the occlusal third before the age of 30 years (p = 0.039) and this increase was significantly greater after 30 years at all 3 locations (p < 0.01), with no differences among them (p > 0.15). The presence of wear facets significantly increased ΔZ and LD (p < 0.001 for both). Overall, we concluded that the susceptibility of enamel to developing caries-like lesions increased with estimated dental age. This effect was more pronounced after the estimated age of 30 years and in the presence of natural tooth wear facets., (© 2020 S. Karger AG, Basel.)

Introduction: Erosive tooth wear has a multifactorial origin, where multiple risks contribute to its initiation and subsequent progression. The prevalence of tooth wear varies among countries; therefore, national studies are needed to examine the prevalence of this condition and its associated determinants., Materials and Methods: A sample of this national study included a total of 1,397 adults (response rate of 52%). Severity and number of teeth with erosive tooth wear, caries experience (D3MFS), and fluorosis were assessed clinically. A self-reported questionnaire inquired about sociodemographics, oral health behavior, diet, and general health. Fluoride levels in drinking water at the recruitment areas were also recorded. Data were analyzed by bivariate and multivariate methods., Results: The prevalence of erosive tooth wear in enamel and dentin combined was 59% among 35- to 44-year-old, 75% among 45- to 54-year-old, 70% among 55- to 64-year-old, and 66% among 65- to 74-year-old males. The prevalence among females in the respective age groups was 44, 60, 63, and 59%. Erosive tooth wear in enamel was associated with a lower fluoride level (≤1 ppm) in the drinking water (OR 2.1, 95% CI 1.1-4.2). Erosive tooth wear in dentin was positively associated with male gender (OR 1.7, 95% CI 1.1-2.5), periurban/rural residency (OR 1.6, 95% CI 1.1-2.4), older age (OR 1.6, 95% CI 1.3-1.9), presence of reflux (OR 3.3, 95% CI 1.0-10.9), and negatively with higher D3MFS scores (OR 0.7, 95% CI 0.5-0.9)., Conclusions: The prevalence of erosive tooth wear in enamel and dentin was relatively high in Lithuania; the erosive tooth wear in enamel and dentin combined was 52% among 35- to 44-year-olds, 68% among 45- to 54-year-olds, 67% among 55- to 64-year-olds, and 63% among 65- to 74-year-olds. Lower fluoride level in drinking water was associated with erosive tooth wear in enamel. Male gender, residency in periurban/rural areas, older age, and presence of acid reflux were associated with higher odds, while higher D3MFS scores were associated with lower odds for erosive tooth wear in dentin. These results can be used to plan dental public health prevention., (© 2020 S. Karger AG, Basel.)

Introduction: Several oral problems may be perceived in individuals who were submitted to bariatric surgery, due to metabolic and behavioral changes relative to diet and oral hygiene. Tooth wear appears to suffer impact after bariatric surgery, because there may be an increase in gastroesophageal reflux., Objective: To systematically review the literature regarding the impact of bariatric surgery on gastroesophageal reflux and tooth wear., Method: The following databases were accessed by two independent, calibrated examiners: PubMed, Medline, Lilacs, Scielo and Cochrane using the following descriptors: "bariatric surgery" AND "dental erosion" OR "bariatric surgery" AND "dental erosion" AND "gastroesophageal reflux disease". After excluding duplicate studies, 12 studies were initially evaluated by the title and abstract. The excluded studies were those without relevance to the present research, literature review studies and case reports. Thus, four articles were included in this study. All the articles evaluated indicated high association between gastroesophageal reflux and tooth wear in patients submitted to bariatric surgery. Association of these outcomes was more evident six months after the surgical procedure., Conclusion: Patients submitted to bariatric surgery showed higher prevalence of gastroesophageal reflux and tooth wear.

Objectives: Central African small-scale foragers subsist primarily on hunting game activities and wild plant-food gathering. Starch-rich tubers are underground storage organs (USOs) and staple food resources in savanna and tropical rainforests. However, little is known about the effect of USO consumption on tooth wear development in living hunter-gatherers. We report age- and sex-dependent tooth wear rates in forest-dwelling Baka Pygmies with well-documented wild-yam-tuber-based diet to explore the long-term impact of USO mechanical hardness and abrasiveness on the wearing down of the teeth., Materials and Methods: Percentages of dentine exposure (PDEs) of permanent left mandibular first molars (M 1 ) were recorded using in vivo high-resolution replicas of Baka individuals (aged 8-33 years), inhabiting Le Bosquet district in Cameroon (Western Africa). Regression and covariance analyses were used to test the effect of individual aging by sex on PDE rates., Results: We found a strong increase of PDE by age among Baka individuals. No evidence of sexual dimorphism in wear patterns suggests similar sex-related dietary and masticatory demands during growth. Overall, greatest dentine exposure values ≈4% denote unexpected slow wear down rates for foraging diets relying on USO consumption., Discussion: The low molar wear rates with age found in Baka Pygmies contrast with extensive wear rates in savanna-dwelling foragers, reflecting differences in thermal processing techniques affecting fracture toughness and grittiness of mechanically challenging foods. Our findings reveal that culture-specific dietary proclivities influence tooth wear among foraging behaviors with important implications in hominin dietary versatility and abrasive stress on chewing surfaces., (© 2019 Wiley Periodicals, Inc.)

Early modern humans (EMH) are often touted as behaviorally advanced to Neandertals, with more sophisticated technologies, expanded resource exploitation, and more complex clothing production. However, recent analyses have indicated that Neandertals were more nuanced in their behavioral adaptations, with the production of the Châtelperronian technocomplex, the processing and cooking of plant foods, and differences in behavioral adaptations according to habitat. This study adds to this debate by addressing the behavioral strategies of EMH (n = 30) within the context of non-dietary anterior tooth-use behaviors to glean possible differences between them and their Neandertal (n = 45) counterparts. High-resolution casts of permanent anterior teeth were used to collect microwear textures of fossil and comparative bioarchaeological samples using a Sensofar white-light confocal profiler with a 100x objective lens. Labial surfaces were scanned, totaling a work envelope of 204 x 276 μm for each individual. The microwear textures were examined for post-mortem damage and uploaded to SSFA software packages for surface characterization. Statistical analyses were performed to examine differences in central tendencies and distributions of anisotropy and textural fill volume variables among the EMH sample itself by habitat, location, and time interval, and between the EMH and Neandertal samples by habitat and location. Descriptive statistics for the EMH sample were compared to seven bioarchaeological samples (n = 156) that utilized different tooth-use behaviors to better elucidate specific activities that may have been performed by EMH. Results show no significant differences between the means within the EMH sample by habitat, location, or time interval. Furthermore, there are no significant differences found here between EMH and Neandertals. Comparisons to the bioarchaeological samples suggest both fossil groups participated in clamping and grasping activities. These results indicate that EMH and Neandertals were similar in their non-dietary anterior tooth-use behaviors and provide additional evidence for overlapping behavioral strategies employed by these two hominins., Competing Interests: The authors have declared that no competing interests exist.

Rationale: Full-mouth rehabilitation of patients with bruxism and severely worn dentition poses a great challenge to clinicians. Several treatment planning methods and restorative materials are used to treat tooth wear in modern dentistry. Clinicians should be able to select the most suitable treatment planning methods and materials for individual patients depending on their specific situation., Patient Concerns: A 47-year-old male was referred for evaluation of a severely worn dentition., Diagnoses: Clinical and radiographic evaluation revealed tooth wear in the entire dentition. The interocclusal distance at rest was 4 mm, and the patient had a parafunctional habit of bruxism., Interventions: A digital smile design was used to formulate a treatment plan. Full-mouth rehabilitation was performed using a combination of conventional and digital materials and methods., Outcomes: The full-mouth restoration showed satisfactory functions and esthetics. No complications were observed in the restorations, supporting tissues, and temporomandibular joints during 2-year follow-up., Lessons: In clinical practice, it is important to determine the optimal combination of the available methods for treatment planning. This case report details the formulation of a unique treatment plan for the dental rehabilitation of a severely worn out dentition, which is considered challenging due to the limitations imposed by biological tissues and restorative materials. The use of conventional and digital tools for treatment planning, patient education, and treatment execution was demonstrated.

Malocclusions are a misalignment or incorrect positioning of the teeth when the upper and lower jaws close. These are poorly described in the koala and can result in irregular mastication which can have lifelong effects on body condition and oral health. A total of 370 koalas from two populations in Queensland (295) and one in South Australia (75) were examined for malocclusions. The prevalence of malocclusions in South Australian free-ranging koalas, captive Queensland koalas and Queensland free-ranging koalas was 39% (44), 30% (29) and 22% (29) respectively. Four types of malocclusion were identified based on severity of misalignment of the incisor/canine region, types 1, 2, 3 and 4. Maxillary overbite measurements of the molariform teeth were determined and these anisognathic values were then used to describe malocclusions within familial relationships in captive colonies. Captive koalas with a malocclusion had narrower mandibular width that ranged between 0.5 and 1% less than the normal measurements. The specific malocclusions reported in this study affected individuals by leading to tooth rotation, mobility and erosion with inefficient mastication of food and vegetation compaction. These changes increased the oral cavity pathology, by placing animals at risk of periodontal disease. There was evidence of familial links to malocclusion types in captive animals. Therefore captive breeding recommendations should consider known koala malocclusion traits to minimise their effect on future generations., (© 2019 Australian Veterinary Association.)

The underlying mechanism of the development of cups and grooves on occlusal tooth surfaces is still unclear. The aim of this study was to evaluate factors contributing to in-vitro cup formation, and to elucidate the clinical process. Extracted human molar teeth were exposed to acidic aqueous solutions at pH of 4.8 and 5.5 in combination with different loading conditions: no load (0N, control), 30N or 50N. Before and after 3 months exposure, the samples were scanned using a non-contact profilometer. A statistically significant difference between a loading of 0N and 50N was found at pH 4.8 (p < 0.002). Cup shaped lesions had formed only at pH of 4.8, in the 30N and 50N groups. The study showed that a cup can arise fully in enamel and that this requires simultaneous acidic and mechanical loading.

Background: Although there are several studies on permanent tooth wear caused by dental materials, studies concerning primary teeth are limited., Aim: To evaluate the wear of primary tooth enamel against different ceramic and composite resin materials., Settings and Design: In vitro study. Materials and Methods: We assessed five materials (n = 10 per group): monolithic zirconia (group Z), lithium disilicate glass ceramic (group L), resin nanoceramic (group R), nanohybrid composite resin (group C), and primary tooth enamel (group E). The mesiopalatal cusps of primary maxillary second molars were used as antagonists. Wear tests were performed in a dual-axis chewing simulator, and the volume loss in the antagonist tooth was evaluated using a laser scanner and three-dimensional profiling system., Statistical Analysis Used: Data were statistically analyzed using one-way analysis of variance with Tukey's post hoc tests (P < 0.05). Results: The maximum antagonist tooth wear was observed in group L (3.84 ± 0.7 mm 3 ), followed by groups C (3.68 ± 0.76 mm 3 ), R (3.48 ± 0.71 mm 3 ), Z (2.66 ± 0.65 mm 3 ), and E (1.66 ± 0.42 mm 3 ). Volume loss was significantly lesser in group Z than in groups L and C (P < 0.05), whereas there were no significant differences among groups L, C, and R., Conclusion: Within the limitations of this in vitro study, our findings suggest that zirconia should be used for full coronal coverage in primary tooth restorations because it causes lesser antagonist tooth wear than does lithium disilicate, resin nanoceramic, and nanohybrid composite resin., Competing Interests: None

Objectives: The aim of this study was to learn more about levels of knowledge relating to erosive tooth wear and about the most desirable way of disseminating dental information among young adults., Methods: The research was a cross-sectional study of 331 young adults (20-25 years old) attending 25 dental care practices. Participants were asked to fill out a questionnaire with questions about their background, knowledge relating to erosive tooth wear and the preferred way of acquiring information about erosive tooth wear., Results: The results showed that there are gaps in the knowledge of young adults about erosive tooth wear. The knowledge score depended on educational level and dental information received in the past. The preferred way of acquiring information was chairside information from an oral health care professional complemented by tailored information in writing., Conclusion: There is a lack of knowledge among young adults about erosive tooth wear. They prefer to receive information from the oral health care professionals accompanied by tailored information in writing. Further research should focus on developing this tailored information in line with the advice given by the oral health care professional., (© 2018 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Objective: To evaluate the effect of resistance training (RT) regarding potential hazard for dental wear, tooth abfractions, temporomandibular joint disc displacement, limitation in mouth opening, and existence of cervical spine disorders. The initial study hypothesis was that extensive resistance trainees (ExRT) would suffer from the above-mentioned symptoms more often than recreational trainees (RcT)., Methods: A controlled comparative study among male gym members via questionnaires and a clinical examination., Results: ExRT had a higher prevalence of teeth indentations on the tongue (26% vs. 2% p < 0.001) and a higher prevalence of tooth abfractions than RcT (28% vs. 4% p < 0.005). ExRT exhibited a higher prevalence of cervical movement limitations (p < 0.05) and inadequate posture (p < 0.001)., Conclusion: RT by itself may not be a risk factor for disc displacement. Nevertheless, it may act as a potential risk factor for irreversible hard tooth tissue damage and contribute to neck postural and mobility impairments.