Search

Objective: This study aimed to analyze the effectiveness of root-shape inserts mounted on a reciprocating handpiece during the procedure of root surface debridement (RSD) on extracted teeth. Three different approaches were compared: ultrasonic scaling, employment of root-shape inserts mounted on a reciprocating handpiece, and a combination of both., Materials and Methods: A total of 51 extracted teeth were divided into three groups. The first group was instrumented with an ultrasonic scaler, the second group with flexible root-shape inserts mounted on a reciprocating handpiece (grain size 40, 15, and 4 μm), whereas the final group underwent a combination of both approaches. The time required for the instrumentation was taken. The specimens were subjected to optical and scanning electron microscopy (SEM), and the photographs were evaluated by three examiners who were blinded to the study. The parameters included were: SEM roughness index (SRI) for the roughness calculation, remaining calculus Index (RCI) to evaluate the residual calculus deposits, and loss of tooth substance index (LTSI) to evaluate the loss of tooth substance caused by instrumentation., Result: The results revealed that the time taken for the instrumentation was on average longer when the root-shape inserts were employed alone, meanwhile the combined approach did not show significant difference in comparison with the ultrasonic scaling. The lower average RCI was obtained with a combined approach. The use of root-shape inserts seems to cause a moderate increase in LTSI, especially in a combined approach, whereas it resulted in a better average SRI., Conclusion: The employment of root-shape inserts seems to be effective in the RSD for its ability to obtain a smooth and calculus-free instrumented surface, especially when used in combination with an ultrasonic scaler, and their use can so represent a valid approach to be tested in further in vivo studies., (© 2020 The Authors. Clinical and Experimental Dental Research published by John Wiley & Sons Ltd.)

Objectives: The aim of this study was to evaluate by light microscopy analysis the effect of the use of miniaturised piezoelectric tips versus mini-five area specific curets on calculus removal and postoperative root surface alterations., Methods: A total of 20 extracted teeth were used. Two square surfaces (5×5 mm) were marked on each root surface with a diamond bur mounted on a high-speed handpiece. Before and after instrumentation, a series of magnified images (4.2×) of each experimental surface were taken with a standardized approach. According to a randomization list, the two surfaces on each sample were instrumented in a standardised fashion either with a mine-five curet or a slim piezoelectric tip. The images were processed using an imaging software. Data were summarised as means and standard deviations for the two outcomes (calculus and alterations.) at each time (pre and post) for both of the groups (manual and mechanical)., Results: Both manual and mechanical instrumentation significantly reduced the calculus deposits ( p < .001) without significant differences between the two groups. Both manual and mechanical treatments significantly increased alterations ( p < .01). There was a statistically significant evidence of a greater increase in alterations from mechanical treatment., Conclusions: Slim mechanical piezoelectric tips and manual mini-five area-specific curets have similar effects on calculus removal. Manual instrumentation results in a more homogeneous postoperative root surface with less root alterations., Competing Interests: The authors declare that they do not have any conflict of interest in relation to this project., (©2019 The Authors. Clinical and Experimental Dental Research published by John Wiley & Sons Ltd.)

Objectives: To evaluate the influence of variations in the working angle of the piezoelectric ultrasonic scaler (PUS) on root surfaces., Material and Methods: Fifty-five uniradicular bovine teeth were used, of which 25 teeth were used for the analysis of the roughness and root wear, while the remaining 30 teeth were used for the analysis of morphology (MRS) and the attachment of blood components (ABC). The teeth were randomly divided into five groups according to the type of treatment (G1-G5: piezoelectric ultrasonic scaler; G6: manual curette) and to the PUS working angle applied (G1: 0°; G2: 30°; G3: 45°; G4: 60°; G5: 90°). For statistical analysis, the data describing the MRS and ABC were analysed by the Kruskal-Wallis and Dunn's tests, and the data describing the roughness and tooth wear were analysed by anova and Tukey's tests at the significance level of 5%., Results: Manual curette (MC) promoted a smoother root surface than the application of the PUS. The PUS used at the angles of 30° and 45° resulted in a high level of ABC that was comparable to that obtained by MC. Additionally, the group in which the PUS was applied at an angle of 45° exhibited less tooth wear than the other groups., Conclusions: Changes in the working angle of the PUS influenced the characteristics of root surfaces after instrumentation., (© 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Background and Objective: The root surface topography exerts a major influence on clinical attachment and bacterial recolonization after root planing. In-vitro topographic studies have yielded variable results, and clinical studies are necessary to compare root surface topography after planing with current ultrasonic devices and with traditional manual instrumentation. The aim of this study was to compare the topography of untreated single-rooted teeth planed in vivo with a curette, a piezoelectric ultrasonic (PU) scraper or a vertically oscillating ultrasonic (VOU) scraper., Material and Methods: In a randomized experimental trial of 19 patients, 44 single-rooted teeth were randomly assigned to one of four groups for: no treatment; manual root planing with a curette; root planing with a PU scraper; or root planing with a VOU scraper. Post-treatment, the teeth were extracted and their topography was analyzed in 124 observations with white-light confocal microscopy, measuring the roughness parameters arithmetic average height, root-mean-square roughness, maximum height of peaks, maximum depth of valleys, absolute height, skewness and kurtosis., Results: The roughness values arithmetic average height and root-mean-square roughness were similar after each treatment and lower than after no treatment ( p < 0.05). Absolute height was lower in the VOU group than in the untreated ( p = 0.0026) and PU (p = 0.045) groups. Surface morphology was similar after the three treatments and was less irregular than in the untreated group. Values for the remaining roughness parameters were similar among all treatment groups ( p > 0.05)., Conclusion: Both ultrasonic devices reduce the roughness, producing a similar topography to that observed after manual instrumentation with a curette, to which they appear to represent a valid alternative., (© 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Objective: Despite promising results of Er:YAG laser in periodontal debridement, to date there is no consensus about the ideal settings for clinical use. This experimental clinical trial aimed to determine the effects of debridement using Er:YAG laser and to compare with ultrasonic treatment., Materials and Methods: Sixty-four teeth were divided into two in vivo and in vitro subgroups. Each tooth received ultrasonic treatment on one side and Er:YAG laser debridement at either 60, 100, 160 or 250 mJ pulse(-1) and at 10 Hz on the other side on a random basis. All samples were morphologically analyzed afterwards under scanning electron microscope for surface changes and dentinal tubules exposure. Treatment duration (d) was also recorded., Results: Laser debridement produced an irregular, rough and flaky surface free of carbonization or meltdown while ultrasound produced a relatively smoother surface. The number of exposed dentinal tubules (n) followed an energy-dependent trend. The number of exposed tubules among the in vivo laser groups was n 60 mJ = n 100 mJ < n 160 mJ < n 250 mJ (P < 0.001). Also 160 and 250 mJ lasers led to significantly more dentinal exposure than ultrasound under in vivo condition. Within the in vitro laser groups, dentinal tubules exposure was n 60 mJ < n 100 mJ < n 160 mJ < n 250 mJ (P ≤ 0.0015). Furthermore, in vitro laser treatments at 100, 160 and 250 mJ led to significantly more dentinal denudation than ultrasound. Treatment duration (d) for the in vivo groups was d 60 mJ > d 100 mJ > d Ultrasound = d 160 mJ > d 250 mJ (P ≤ 0.046), while for the in vitro groups it was d 60 mJ > d 100 mJ = d Ultrasound = d 160 mJ >d 250 mJ (P ≤ 0.046)., Conclusions: Due to excessive treatment duration and surface damage, Er:YAG laser debridement at 60 and 250 mJ pulse(-1), respectively, is not appropriate for clinical use. Although laser debridement at 100 and 160 mJ pulse(-1) seems more suitable for clinical application, compared to ultrasound the former is more time-consuming and the latter is more aggressive. Using a feedback device or lower pulse energies are recommended when using laser in closed field., (© 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Introduction: A cemental tear is a special type of surface root fracture noted in combination with periodontal and/or periapical bony destruction. We hypothesized that clinical characteristics and treatment techniques may affect the prognosis of teeth with cemental tears., Methods: Treatment outcome for the teeth with a cemental tear was assessed in a multicenter cemental tear study project. Of the 71 teeth with cemental tears, 38 teeth (53.5%) were extracted. The remaining 33 teeth (46.5%) were examined for a treatment outcome of healed, questionable, or failed., Results: Outcome assessment found that 51.5% (17/33), 42.4% (14/33), and 6.1% (2/33) of teeth were classified as healed, questionable, and failed, respectively. Additive bivariate analysis indicated a significant difference between treatment outcome and the length (P = .01) and apicocoronal location (P = .02) of the separated root fragments. Logistic regression analysis found that treatment technique and apicocoronal location of cemental tears may affect the treatment outcome. The percentage of healed cemental tear cases located in the apical, middle, and cervical third of roots was 11.1%, 66.7%, and 60.0%, respectively. By surgical management, 57.7% of cemental tears were healed, whereas only 28.6% cases were healed after nonsurgical treatment., Conclusions: Most teeth with cemental tears can be retained to function by nonsurgical and surgical periodontal and endodontic treatment. Clinical diagnosis and treatment of cemental tears should also consider the apicocoronal location and the type of treatment technique to improve outcomes., (Copyright © 2014 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.)

Background and Objectives: Tetracycline hydrochloride has been shown to produce changes on periodontally involved root surfaces that can potentially enhance periodontal regeneration. This in vitro study was carried out to compare the root surface changes after scaling and root planing alone, and scaling and root planing followed by application of 100 mg/ml tetracycline hydrochloride under the Scanning Electron Microscope., Materials and Method: Fifteen periodontally compromised freshly extracted single-rooted teeth were thoroughly cleaned. The teeth were then sectioned into thirty blocks and divided into two groups. Group I (control) consisted of teeth which received scaling and and root planing alone and Group II received scaling and root planing followed by application of 100 mg/ml tetracycline hydrochloride under the Scanning Electron Microscope., Results: Tetracycline hydrochloride solution showed statistically highly significant removal of smear layer at 100 mg/ml solution (p < 0.001) and enlargement of dentinal tubule diameter (1.46 microm)., Conclusion: It can be concluded that tetracycline hydrochloride at concentration 100 mg/ml effectively removes the smear layer and enlarges the dentinal tubules.

A woman undergoing orthodontic treatment presented with recession and reduced keratinized gingiva on teeth 31 and 41. The patient declined creation of a donor site for conventional autogenous connective soft tissue grafting and opted for an acellular dermal matrix soft tissue substitute for root coverage. Orthodontic treatment followed, and the patient returned for orthognatic surgery after 12 years. Long-term follow up revealed that root coverage remained stable over time and creeping attachment on both teeth was observed. Unexpectedly, an increase in the width of keratinized gingiva was observed. No adverse effects of orthodontic treatment carried out after grafting were observed.

Background: The release profile of 25% doxycycline (DOX) gel loaded on a biodegradable collagen membrane (COL) after 24% EDTA root surface etching was evaluated., Methods: Thirty systemically healthy patients, each with at least one pair of contralateral interproximal intrabony defects ≥4 mm deep, along with an interproximal probing depth ≥6 mm and clinical attachment loss ≥4 mm, were randomized into two groups. Group 1 consisted of sites treated with open-flap debridement followed by placement of DOX gel-loaded COL (DOX-COL), whereas group 2 sites were treated with flap surgery followed by the placement of DOX-COL after EDTA etching of the exposed root surfaces (DOX-COL + EDTA). Samples of gingival crevicular fluid were obtained 1, 3, 7, 14, and 21 days after surgery. Separation was performed, and quantitative measurements of DOX were taken with a high-performance liquid chromatography. Clinical evaluation and follow-up for 6 months were performed., Results: At 21 days, DOX-COL + EDTA group showed 5.3 μg/mL value. However, no DOX was detected in samples of the DOX-COL group. DOX-COL + EDTA-treated group retained more DOX during the periods of 3, 7, 10, and 14 days than did the DOX-COL group., Conclusion: EDTA root surface etching could enhance DOX availability in the gingival crevicular fluid after its release from the collagen membrane.

Periodontal regeneration using EDTA or PDGF showed promising results, but the effect of combined application was still unclear. This study aimed to verify the effect of EDTA and/or PDGF application on root adhesion and proliferation of PDL fibroblast cells. Eighty specimens were prepared from forty periodontitis teeth and made five groups: (1) diseased (untreated), (2) SRP (scaling root planing), (3) EDTA (24%), (4) PDGF (25 ng/ml) and (5) Combined application of EDTA and PDGF. Periodontal ligament cells were cultured on the above conditioned dentin plate, and SEM examination was preformed and cells were counted within a representative standard area for both cell morphology and density. All groups including untreated showed significantly increase of adhered cells from baseline to 7 days. Among them, rate of increase was much higher in EDTA, PDGF, and combined groups. ANOVA test indicated that the number of cells in PDGF and combined groups was significantly higher than diseased group at 1 day. On day 7, PDGF and combined groups showed significantly higher number of adhesion cells than that found in the diseased, SRP and EDTA groups. Thus, root conditioning with EDTA enhanced cell adhesion more than SRP alone. There was no significant difference of cell number between PDGF and combined group. Combined application of EDTA and PDGF increased significantly PDL cell adhesion than EDTA alone. PDGF alone, however, also showed comparable effect to combined application at all periods. Thus, synergistic effect between PDGF and EDTA was not observed.

Trial Design: This long-term 14-year-randomized split-mouth study aimed at evaluating (1) the outcomes of two different methods of root surface modifications (root surface polishing versus root planing) used in combination with a coronally advanced flap (CAF) and (2) the long-term results of CAF performed for the treatment of single gingival recessions., Methods: Ten patients with similar bilateral recessions ≥2 mm were selected for a split-mouth randomized design study. Exposed root surfaces were assigned to receive polishing (test sites) or root planing (control sites). A multilevel model was used to analyse data at 3 months, 1, 5 and 14 years., Results: One patient dropped out after 1 year. At 14 years, recession depth (Rec) was 0.9 (1.2) mm for the test sites and 0.9 (0.9) mm for the control sites. The interaction between treatment and keratinized tissue was significant (p=0.0035). Rec increased slightly over time (p=0.0006) in both the groups., Conclusions: This study shows that during a long-term follow-up, gingival recession recurred in 39% of the treated sites following the CAF procedure., (© 2011 John Wiley & Sons A/S.)

This study used scanning electron microscopy (SEM) to evaluate the morphology and adhesion of blood components on root surfaces instrumented by curettes, piezoelectric ultrasonic scaler and Er,Cr:YSGG laser. One hundred samples from 25 teeth were divided into 5 groups: 1) Curettes; 2) Piezoelectric ultrasonic scaler; 3) Curettes plus piezoelectric ultrasonic scaler; 4) Er,Cr:YSGG laser; 5) Curettes plus Er,Cr:YSGG laser. Ten samples from each group were used for analysis of root morphology and the other 10 were used for analysis of adhesion of blood components on root surface. The results were analyzed statistically by the Kruskall-Wallis and Mann-Whitney tests with a significance level of 5%. The group treated with curettes showed smoother surfaces when compared to the groups were instrumented with piezoelectric ultrasonic scaler and the Er,Cr:YSGG laser. The surfaces instrumented with piezoelectric ultrasonic scaler and Er,Cr:YSGG laser, alone or in combination with hand scaling and root planing, did not differ significantly (p>0.05) among themselves. No statistically significant differences (p>0.05) among groups were found as to the adhesion of blood components on root surface. Ultrasonic instrumentation and Er,Cr:YSGG irradiation produced rougher root surfaces than the use of curettes, but there were no differences among treatments with respect to the adhesion of blood components.

Although in vitro studies have shown encouraging results for root surface conditioning with demineralizing agents, in vivo studies have failed to show its benefits in periodontal healing. This can be attributed to several factors, among which, the hypermineralization of dental surface. Therefore, this in vitro study compared, using scanning electron microscopy (SEM), the effect of root surface conditioning with different conditioners (1% and 25% citric acid, 24% EDTA and 50 mg/mL tetracycline hydrochloride) in impacted teeth and in teeth that had their roots exposed to the oral environment. One trained examiner assessed the SEM micrographs using a root surface modification index. There was a tendency of more root surface modification in the group of impacted teeth, suggesting that the degree of root mineralization influences its chemical demineralization.

This case report presents an unusual complication, cervical root resorption, after a conventional connective tissue grafting procedure and tetracycline root conditioning. The recession was 7 mm high, with 0.5 mm of keratinized tissue present, a 2-mm probing depth, and was classified as Miller Class III. The clinical result was satisfactory and 5 mm of root coverage was achieved. However, after 20 months, cervical resorption was diagnosed. It is suggested that tetracycline root conditioning may cause root resorption in long-term evaluations. There is also a possibility of root resorption occurring in 1-year postoperative controls. Other factors will be discussed in relation to this negative clinical result.

Aim: The aim of the present study was to compare the removal of the smear layer and exposure of collagen fibers of the root surface following the application of five citric acid solution concentrations., Methods and Materials: Two hundred seventy (270) samples were equally divided into six groups (n=45) for treatment with saline solution (control) and five different concentrations of citric acid (0.5, 1, 2, 15, and 25 percent). Three acid application methods were used (passive, brushing, and burnishing) as well as three application periods (1, 2, and 3 minutes). A previously trained, calibrated (kappa score = 0.93), and blind examiner subsequently scored scanning electron micrographs (SEMs) of the samples. Statistical analyses were performed by using Kruskal-Wallis and Dunn's post-hoc tests., Results: According to the results obtained and within the limitations of the methodology used, the citric acid applications were more effective than the control treatment of applying saline solution (p<0.05). However, no statistically significant differences were observed among the three application methods and three application periods. Descriptive analyses showed that best results for exposure of collagen fibers were obtained with the application of citric acid at 25 percent by brushing for 1 or 3 minutes., Conclusion: The best results for exposure of collagen fibers in this study were obtained with application of citric acid at 25 percent by brushing for 1 or 3 minutes, even though there were no statistically significant differences among the groups., Clinical Significance: The best results for exposure of collagen fibers on root surfaces noted in this study were obtained with application of citric acid at 25 percent by brushing for 1 or 3 minutes.

Background: Gingival recession remains an important problem in dental esthetics. A new dermal matrix material has been introduced, but its effectiveness has not been studied and compared to current dermal matrix material. The aim of this study is to compare the healing associated with a coronally advanced flap for root coverage in areas of localized tissue recession when using Alloderm (ADM) and Puros Dermis (PDM)., Methods: A split-mouth design was used for this study, with 52 contralateral sites in 14 patients with Miller Class I or III facial tissue recession. Twenty-six sites were treated with coronally advanced flap using PDM, and 26 sites were treated with coronally advanced flap using ADM, all followed for 6 months. Clinical measurements of vertical recession, keratinized tissue, probing depths, and attachment levels were made initially, at 3 months, and at 6 months., Results: Both groups had significant improvement in the amount of recession coverage with means of 2.83 mm for the PDM and 3.13 mm for the ADM. The percentage of root coverage was 81.4% for the PDM and 83.4% for the ADM; differences between the materials were not statistically significant., Conclusions: Based on the results of this study, there was no statistical or clinical difference in the amount of root coverage, probing depth, or keratinized tissue in coronally advanced flaps for root coverage with either of the two acellular dermal matrix materials. Both materials were successful in achieving root coverage.

Objective: The purpose of this in vitro study was to evaluate the dentine root surface roughness and the adherence of Streptococcus sanguinis (ATCC 10556) after treatment with an ultrasonic system, Er:YAG laser, or manual curette., Background Data: Bacterial adhesion and formation of dental biofilm after scaling and root planing may be a challenge to the long-term stability of periodontal therapy., Materials and Methods: Forty flattened bovine roots were randomly assigned to one of the following groups: ultrasonic system (n = 10); Er:YAG laser (n = 10); manual curette (n = 10); or control untreated roots (n = 10). The mean surface roughness (Ra, microm) of the specimens before and after exposure to each treatment was determined using a surface profilometer. In addition, S. sanguinis was grown on the treated and untreated specimens and the amounts of retained bacteria on the surfaces were measured by culture method., Results: All treatments increased the Ra; however, the roughest surface was produced by the curettes. In addition, the specimens treated with curettes showed the highest S. sanguinis adhesion. There was a significant positive correlation between roughness values and bacterial cells counts., Conclusion: S. sanguinis adhesion was the highest on the curette-treated dentine root surfaces, which also presented the greatest surface roughness.

The regular periodontal practice of scaling and root planing produces a smear layer on the root surface that is detrimental to the readhesion of tissues during subsequent regeneration therapy. Although it has been demonstrated that gels containing the chelating agent ethylenediaminetetraacetic acid (EDTA) can assist in the removal of this contaminating layer, no quantitative method is yet available by which to evaluate the efficiency of the treatment. In this article, the power of atomic force microscopy (AFM) as a technique for monitoring and mapping the surfaces of dentinal roots is demonstrated. Roughness parameters of teeth that had been scaled and root planed were determined from AFM images acquired both before and after treatment with EDTA. The results confirmed that EDTA is an efficient cleaning agent and that dentinal samples free from a smear layer are significantly rougher than the same samples covered by a contaminating layer. AFM analysis is superior to alternative methods involving scanning electron microscopy because the same sample section can be analyzed many times, thus permitting it to be used as both the control and the treatment surface.

Ultrasonic and power-driven instrumentation is gaining in significance as an acceptable alternative to manual periodontal root treatment. Some question whether they do not remove too much tooth substance. Various ultrasonic scalers, hand instruments and two power-driven systems were compared by assessing the loss of tooth substance due to root instrumentation. Quantitative analysis of this effect of the instruments used was performed on 20 freshly extracted, non-periodontally involved, large human molars. In the first study, 40 specimens were randomly assigned to four groups of treatment: combined use of ultrasonic scaler and Periopolisher diamond-coated inserts (US-POL), hand instruments (MANUAL), Perioplaner-Periopolisher system (PPL-POL) and Periokit ultrasonic-designed scalers (PERIOKIT). The second study involved two treatment groups, ultrasonic scaler alone and hand instruments, each allocated with 20 teeth (small root fragments). An unpaired two-tailed t test was carried out for both studies to compare the average weight loss of root substance with the modes of instrumentation. The level of significance was set at p

Objective: This study assessed associations between the number of standardized scaling strokes and the reduction of endotoxin on the root surface., Background: Therapy of periodontally involved teeth attempts removal of accretions by scaling and root planing. The amount of mechanical therapy required to free the root surface from etiologic factors remains unknown., Methods: Twenty-four extracted human caries-free single rooted teeth with at least 5 mm attachment loss were used. A region of interest (ROI) which contained subgingival calculus was defined on the root surface of each tooth. Standardized force instrumentation was applied using a force-measuring curet. Fifty working strokes were applied to every ROI. Forces applied were recorded. The force recordings were converted from Millivolts into Newtons (N). After every unit of 5 strokes, presence of calculus was evaluated and scaling debris was collected. Endotoxin concentration was determined in the debris samples., Results: The endotoxin values for strokes 1-5 were statistically significantly greater than the values from all other stroke intervals. Complete calculus removal occurred after a mean of 9.3 strokes. The endotoxin concentration reached a minimal level with concentrations of 0.03-0.306 EU/ml after calculus removal was complete., Conclusion: These findings suggest that completion of calculus removal coincides with endotoxin levels associated with clinically healthy teeth.

Root surface biomodification has been used to treat periodontitis and gingival recession. The rationale for this procedure is that removing the smear layer from the root surfaces exposes collagen fibers, which leads to improved healing. Although animal studies have shown promising results, human studies have been disappointing. Some experts claim that the use of low-pH biomodification agents may cause necrotizing effects, and the use of neutral-pH agents does not. However, clinical investigations generally have failed to find any improvement in clinical parameters when using such agents.

Objectives: The present investigation attempted to determine the amount of cementum and/or dentin removal with Er:YAG laser radiation, dependent on the angulation of a specially-developed application tip., Material and Methods: Subject of the study were 150 extracted incisors, canines, premolars, and molars. Source of laser radiation was an Er:YAG laser device emitting pulsed infrared radiation at a wavelength of 2.94 microm with a pulse duration of 250 micros and a pulse repetition rate of 10 pps. The samples of the 3 study groups were irradiated with 380 laser pulses at radiation energies of 60 mJ (group A), 100 mJ (group B), or 180 mJ (group C). In each group, 10 samples were treated at working tip angulations of 15 degrees , 30 degrees , 45 degrees , 60 degrees , and 90 degrees. The substance removal was determined 3-dimensionally using a newly developed laser scanning system (100,000 surface points per sample, accuracy 5 microm) and a special image-analysing software (Match 3D). Statistical analysis was completed with ANOVA followed by multiple comparisons using the Scheffé-test and with linear regression analysis according to Pearson-Bravais (p < 0.05)., Results: Strong dependence of substance removal, both determined as maximum depth of the defects (0.5% quantil) as well as defect volume, on the angulation of the working tip was shown. At 60 mJ, the depth of the defects was 41.39 (+/- 32.55) microm at an angulation of 15 degrees and that at 90 degrees was 181.39 (+/- 74.42) microm (R2= 0.921). For the radiation energy at 100 mJ, the depth of the defects ranged from 51.96 (+/- 26.86) microm at 15 degrees to 306.64 (+/- 62.44) microm at 90 degrees (R2 = 0.983). Choosing radiation energies at 180 mJ, the depth of the defects ranged from 64.73 (+/- 27.73) microm at 15 degrees to 639.89 (+/- 47.28) microm at 90 degrees , on average (R2 = 0.853)., Conclusions: The results of the present study provide clear evidence that besides the physical radiation parameters, also the parameters of clinical handling, in particular the angulation of the application tip, has a strong influence on the amount of root substance removal using Er:YAG laser radiation.

Background: While there is great interest in measuring the efficacy of root surface debridement, there is little consensus on how this might be best achieved. The aim of this study was therefore to compare four different methods of assessing root surface debridement in their ability to discriminate between ultrasonically instrumented root surfaces and non-instrumented control surfaces., Methods: Single-session subgingival root debridement was performed by an experienced operator on 30 teeth prior to their extraction. Following extraction, efficacy of root surface debridement was measured by percentage of remaining calculus, instrument efficiency, modified instrument efficiency, and percentage apical plaque border. In addition, the effect of probing depth landmark (apical plaque border versus connective tissue attachment) on outcomes was assessed., Results: The results indicated that percentage apical plaque border demonstrated highly statistically significant differences between instrumented and control surfaces (P= 0.02). No other assessment method was able to discriminate between instrumented and non-instrumented surfaces, and this may be a function of the low amount of root surface calculus in the experimental sample. In addition, choice of probing depth landmark had a notable effect on the outcomes for instrument efficiency and modified instrument efficiency. Ninety-five percent limits of agreement of interexaminer reproducibility were found to be much higher than intra-examiner measurement for all four methods of assessment., Conclusions: Percentage apical plaque border appeared to be potentially more useful than other methods for assessing the efficacy of debridement of periodontally involved root surfaces, particularly for measuring instrument penetrability.

In our laboratory, we modified inserts of a sonic scaler to increase effectivity of root surface instrumentation during flap surgery. The present clinical study investigates whether use of this diamond-coated, thickened insert facilitates more rapid root debridement compared to hand instruments and whether clinical wound healing is influenced by the type of instrument used. In 13 patients with moderate to advanced periodontal destructions, flap surgery was carried out on single rooted teeth with probing depth of > or =6 mm. The mean amount of time saved by root debridement with the diamond-coated insert was 60% over curets. Regardless of the used instrumentation method probing depths and attachment level changes were altered and remained unchanged for 2 years after surgery. In conclusion the newly-developed, diamond-coated sonic scaler insert facilitates more rapid root debridement during flap surgery than hand instruments without disadvantageously affecting clinical healing.

The purpose of this study was to compare curets with a small blade to slim ultrasonic inserts on their efficacy in removing artificial deposits from the root trunk and furcation entrance areas of mandibular molars using an in vitro model simulating a clinically closed root debridement approach. The study was conducted on 100 artificial mandibular first molars (50 right side and 50 left side) with anatomical roots. Root trunks, furcation entrances, and furcation areas of each molar were colored by a coat of black model paint. The teeth were fixed in a custom acrylic model and maintained in a firm position by modified acrylic occlusal splints. The root areas were covered with a heavy rubber dam imitating gingival tissue. The model was attached to a mannequin and mounted on a dental chair. Fifty molars (25 right, 25 left) were instrumented with the experimental curets and an equivalent number of molars with the ultrasonic inserts. The instrumentation was carried out by one experienced operator, spending 4 minutes on each molar. The instrumented areas were individually analyzed to determine the percentage of deposits remaining, using a computerized imaging routine system. One-way analysis of variance was conducted to test for differences between both types of instruments. Results revealed that the curets were significantly more efficient (P < 0.01) than the ultrasonic inserts in removing paint from both root trunks and furcation entrances. These findings should be corroborated in a clinical study to determine the potential value of the instruments tested during initial therapy or supportive care of involved mandibular furcations.

Objective: The purpose of this investigation was to compare by scanning electron microscopy (SEM) the surfaces of roots treated with a dentin conditioning agent and other materials that have been used routinely in periodontal therapy for root surface demineralization, namely, citric acid and tetracycline hydrochloride., Materials and Methods: Sixteen freshly extracted human teeth were randomly divided into four equal groups; each tooth was hand scaled and planed prior to root surface conditioning with citric acid, tetracycline hydrochloride, and a dentin bonding conditioner; Tenure Dentin Conditioner (DenMat Corporation, Santa Maria, CA). The last has been used previously in conjunction with a resin-ionomer barrier in cases involving guided tissue regeneration. Root specimens were prepared for scanning electron microscopy and representative micrographs were taken at 1000x and 2000x., Results: The results of this study indicate that there are morphological similarities between surfaces obtained with the dentin conditioning agent and the other acidic materials that are used routinely in periodontal regenerative therapy., Conclusions: Root surface demineralization has been shown to remove the smear layer, and provides a surface which is conductive to mechanical adhesion and cellular mechanisms for growth and attachment.

Consensus has not been reached on the desired characteristics of the root surface following cleaning. It is also not clear what degree of roughness or smoothness results from use of different instruments. In the present human clinical study, various instruments for root surface cleaning were evaluated. 18 teeth destined for extraction for periodontal reasons were utilized. After reflection of soft tissue flaps, the 72 root surface aspects of the 18 teeth were uniformally treated with one of the following instruments: Gracey curette (GC), piezo ultrasonic scaler (PUS), Perioplaner curette (PPC), sonic scaler (SS), 75 microns diamond (75 D) and 15 microns diamond (15.D). The degree of roughness of each surface was measured after extraction. A planimetry apparatus was used to establish the average surface roughness (Ra) and the mean depth of the roughness profile (Rz). It was demonstrated that hand- and machine-driven curettes as well as very fine rotating diamonds created the smoothest root surfaces, while "vibrating" instruments such as sonic and ultrasonic scalers, as well as coarse diamonds, tended to roughen the root surface. Whether the root surface should be rough or smooth in order to enhance tissue healing remains an open question.

Effects of ND:YAG laser irradiation on untreated and root planed tooth roots were investigated to determine whether a cleaning effect and/or removal of smear layer could be achieved without concomitant microstructural or thermal damage. Sixty (60) healthy extracted teeth were either untreated, irradiated only, root planed only, or irradiated and root planed. Intra-pulpal and surface temperatures were monitored during irradiation, then SEM was performed. Smear layer elimination was achieved without inducing hard tissue microstructural damage at 5W, using pulse durations and intervals of 0.1 s, a fluence of 0.77 J/cm2, and a total energy density of approximately 700 J/cm2. However, these results were not consistent in all samples. At these parameters, intra-pulpal temperature increases of 9 to 22 degrees C and surface temperature increases of 18 to 36 degrees C were recorded. Thus, despite their effectiveness for smear layer removal, these parameters may not be appropriate for clinical use as an adjunct to conventional periodontal therapy.

The results of numerous recent investigations indicate that root contamination with bacteria and endotoxins is limited to the root surface only. Therefore, methods on root surfaces instrumentation that preserve root substance should be focused on. Newly available instruments or treatment systems should be evaluated for their root substance-removing potential. The devices for root planing presented here comprised specific files (Rootshape) (with diamond-coating on their convex working surfaces used in conjunction with a water-spray-cooled contra-angle head transforming rotational movements into translatory oscillations. The substance-removal potential of rigid and flexible files with diamond coatings of 2-4, 15, 25 and 40 microns compared with that of regular hand curettes, was evaluated under various working forces. The results demonstrated, that depending on the grit size of the diamond coating, the Rootshape files removed less and in no instance greater amounts of root surface substance than did hand instruments.

Scaling and root planing are the most common techniques utilized to achieve a biologically-acceptable root surface. Thorough root debridement is a demanding task, with residual deposits of plaque and calculus a not uncommon finding after instrumentation. This study evaluated the effectiveness of scaling and root planing via a closed versus an open flap approach. Sixty multi-rooted teeth were assigned to one of three groups: untreated controls, closed scaling/root planing, and open flap scaling/root planing. Following debridement, teeth were extracted, immersed in methylene blue, and examined for the percent surface area having stainable residual deposits. The mean percent stained surface area covered by residual plaque and calculus was 54.3% in the closed root planing group compared to 33.0% in the open flap root planing group. The untreated control teeth had 91.0% of the root surface covered with stainable deposits. Within-group comparisons showed no significant difference in the percent stained residual plaque and calculus in shallow areas of the pocket (< or = 3 mm apical to the gingival margin) compared to deeper areas (> 3 mm subgingival). Examination of furcation regions demonstrated heavy residual stainable deposits for both treatment methods, with no significant differences between techniques. There was no correlation between the time spent in root debridement and the percent residual deposit area. The results demonstrate that hand instrumentation alone is inadequate for thorough debridement of furcations and suggest that new approaches are needed to provide a root surface which is compatible with formation of new periodontal attachment. High frequency ultrasonic instruments, rotary burs, and chemical agents may assist in debridement of such surfaces.(ABSTRACT TRUNCATED AT 250 WORDS)

The purpose of this study was to evaluate the effect of furcation entrance width on the efficacy of calculus removal from furcation areas as well as to compare this efficacy between external and furcation surfaces after closed root planing, open root planing and use of a rotary diamond for the furcation area. 30 first and second lower molars scheduled for extraction with a calculus index > or = 2 and a degree II or III furcation involvement were divided into 3 groups: 10 molars were scaled and root planed using a closed approach: 10 molars were scaled and root planed using an open approach; 10 molars were scaled and root planed with an open approach and rotary diamond was used for removal of deposits in the furcation area. After extraction, the width of the furcation entrance was measured buccally and lingually 2 mm apical from the bifurcation and furcations were categorized as wide (width > 2.4 mm) or narrow (width < 2.4 mm). The teeth were assessed in a stereomicroscope and the % of residual calculus on external and furcation surfaces was calculated. The width of the furcation entrance influenced the efficacy in root planning in the open group (p = 0.0015). The use of rotary diamond was the most effective method for removing calculus both for narrow and wide furcations. The effectiveness of open root planning in the mesial root was related to the width of the furcation entrance where the % of residual calculus was significantly higher for narrow furcations (p = 0.008).(ABSTRACT TRUNCATED AT 250 WORDS)

The purpose of this study was to evaluate the efficacy of the calculus removal from multirooted teeth after closed root planing, open root planing and use of a rotary diamond for the furcation area. The effect of pocket depth on the effectiveness of calculus removal was also examined. 30 first and second lower molars scheduled for extraction, with a calculus index > or = 2 and a degree II or III furcation involvement, were divided into 3 groups: 10 molars were scaled and root planed using a closed approach; 10 molars were scaled and root planed using an open approach; 10 molars were scaled and root planed with an open approach and rotary diamond was used for removal of deposits in the furcation area. After extraction, the teeth were assessed in a stereomicroscope and the % of residual calculus was calculated on external and furcation surfaces. The % of residual calculus on the external surfaces was significantly higher after closed than open root planing (p = 0.002). Pocket depth affected the effectiveness of scaling and root planing, with more residual calculus observed for depths > or = 7 mm for both groups. Differences between the 3 groups in the % of residual calculus on furcation surfaces were statistically significant (p < 0.0001 and p < 0.0005). The most effective method was the combination of open root planing and rotary diamond. More calculus was observed in all groups for pocket depths > or = 7 mm but the difference was significant only in the closed group (p = 0.006).(ABSTRACT TRUNCATED AT 250 WORDS)

The purpose of this study was to examine the effects of root preparation using the pulsed Nd:YAG laser, either alone or in combination with manual instrumentation. Study specimens consisting of 18 teeth with associated periodontal pockets from 8 different patients were treated as follows: 5 specimens were root planed with curets followed by laser exposure for 3 minutes using energy settings of 3.0 W at 20 pps; 2 specimens were root planed and then laser treated for 3 minutes using settings of 2.25 W and 20 pps; 4 specimens were treated by laser for 1 minute at settings of 1.75 W and 20 pps followed by root planing; 4 specimens were treated by laser only for 1 minute using settings of 1.75 W and 20 pps; and the remaining 3 teeth served as untreated controls. Both prior to and after completion of the laser and root planing treatments, microbiological samples were obtained from the treated pockets and submitted to a commercial laboratory for analysis of levels of Actinobacillus actinomycetemcomitans, Porphyromonas gingivalis, and Prevotella intermedia. With the exception of two 7-day specimens, all others were extracted immediately post-therapy and processed for SEM examination. All treated specimens, regardless of treatment sequence, exhibited some degree of laser-induced root surface alteration. Notably, laser-treated calculus deposits were free of their characteristic surface layer of microbial plaque. Microbial sampling indicated a post-therapy reduction in levels of all 3 putative microbial pathogens compared to pre-treatment samples and control specimens. However, SEM examination revealed residual deposits of plaque and calculus in all treatment groups.(ABSTRACT TRUNCATED AT 250 WORDS)

The purpose of this study was to evaluate the effects of Nd:YAG laser treatment on root surfaces in vitro when used alone or in combination with conventional scaling and root planing. The study population consisted of 18 unerupted third molars, each with a 3 mm diameter treatment site outlined on the root surface. Three specimens were randomly assigned to each of 6 different treatment groups: 1) untreated control; 2) root planed only; 3) laser treated only using 1.25 W of energy; 4) laser treated only using 1.50 W of energy; 5) laser treated with 1.25 W of energy followed by root planing; and 6) laser treated with 1.50 W of energy followed by root planing. Following their respective treatment, all specimens were prepared for evaluation by scanning electron microscopy. Specimens from Group 2, root planed only, exhibited a smear layer of scale-like texture with parallel instrument tracks resulting from curet use. Specimens treated by laser only, Groups 3 and 4, featured various surface changes not observed in controls such as charring and carbonization of the cementum surface, randomly distributed pitting and crater formation, and melting of the root mineral phase with subsequent resolidification as porous globules. Those specimens treated by laser followed by root planing, Groups 5 and 6, exhibited surface characteristics similar to those noted in Group 2 specimens. Further, there were areas of exposed dentinal tubules resulting from a "peeling" of the cementum layer. The results of this in vitro study suggest that laser use during root preparation, even at relatively low energy levels, will result in physical changes to the root surface.(ABSTRACT TRUNCATED AT 250 WORDS)

In the present scanning electron microscopic study, the possibilities and limitations of non-surgical root planing were investigated. 10 single-rooted teeth from 4 patients with advanced periodontitis were studied. The root surfaces were cleaned and planed without flap reflection, using fine curettes. The teeth were then extracted and the root surfaces were systematically examined by scanning electron microscopy (SEM) for the presence of residual bacteria and calculus. 29 of 40 curetted root surfaces were free of residues, if they were reached by the curette. On the remaining 11 surfaces, only small amounts of plaque and minute islands of calculus were detected, primarily at the line angles and also in grooves and depressions in the root surfaces. Instrumentation to the base of the pocket was not achieved completely on 75% of the treated root surfaces, however. The primary reason for this was the extremely tortous pocket morphology on the teeth selected for study. In conclusion, it may be stated that during non-surgical root planing in cases of advanced periodontitis, surfaces that can be reached by curettes are usually free of plaque and calculus. However, in many cases the base of the pocket will not be reached. It is for this reason that deep periodontal pockets should be treated with direct vision, i.e., after the reflection of conservative flaps.

In order to draw some conclusions about the furcation region accessibility for periodontal instruments and their cleaning effect, the curvature radii of the root faces of 31 lower molars were mathematically determined and compared with the curvature radii of the working end of normally available curettes. From the results of this work it can be seen, that the Gracey curettes have an essential greater curvature radius as the curvature radius of the root faces. On the other site the special curettes for root planing in the furcation region have a smaller curvature radius as that of the root faces. Using the instruments included in this study, it is not possible to achieve an optimal root planing.

The amount of root substance removed by scaling and root planing is largely unknown. The present study evaluated in vitro the root substance loss caused by a defined number of working strokes at known forces. Forty extracted teeth with loss of connective tissue attachment into the middle third of the roots were washed and embedded in plaster, leaving one entire corono-apical tooth aspect exposed. The teeth were reproducibly repositioned in a bench-vise, where a profilometer repeatedly measured root surface levels at the same location. In a standard area of the roots a total of 40 working strokes were applied. Low forces were used in 30 teeth and high forces in 10 teeth. The forces were recorded using a piezo-electric receiver built into the upper shank of the curet. Root substance loss was measured after 5, 10, 20, and 40 working strokes. The results showed that the mean low force used per working stroke across all 40 strokes was 3.04 Newtons for the low forces, and 8.48 Newtons for the high forces. Mean cumulative loss of root substance across 40 strokes was 148.7 microns at low forces, and 343.3 microns at high forces. The mean force per stroke increased slightly across the 40 strokes, while substance removal per stroke decreased. Substance removal per stroke during strokes 1 to 5 was 6.8 microns using low forces and 20.6 microns using high forces. During strokes 21 to 40 mean removal per stroke was 2.3 microns at low forces, and 5.6 microns at high forces. These results suggest that high forces remove more root substance, and loss per stroke becomes less with increasing numbers of strokes.

Epidemiological studies in the sixties indicated that in patients older than 45 years periodontal disease was the major cause of tooth-loss, particularly in molars. However, improved prevention and enhanced dental awareness have now reduced both the incidence of periodontal disease and tooth-loss. Unfortunately, periodontal disease and tooth-loss still progress rapidly in a small group of patients. The currently used diagnostic parameters do not allow the early identification of this small group. Despite controlled periodontal treatment, loss of molars has remained twice as high as overall tooth loss. When all patients are divided into different perio-subgroups, molar loss tends to identify patients with a high periodontal risk. This conclusion can be drawn from the fact that furcation treatment is usually clinically successful, although calculus removal is insufficient. Early diagnosis of molar furcation involvement may help identify the small group of patients in which periodontitis may develop. The local morphological patterns may also contribute to rapid progression of the disease resulting eventually in loss of the molars. In such cases resective therapy is proposed instead of the usual open or closed scaling procedures.