Search

Mesoscopic anatase nanocrystalline TiO2 (nc-TiO2) electrodes play effective and efficient catalytic roles in photoelectrochemical (PEC) H2O oxidation under short circuit energy gap excitation conditions. Interfacial molecular orbital structures of (H2O)3 &OH(TiO2)9H as a stationary model under neutral conditions and the radical-cation model of [(H2O)3&OH(TiO2)9H]+ as a working nc-TiO2 model are simulated employing a cluster model OH(TiO2)9H (Yamashita/Jono's model) and a H2O cluster model of (H2O)3 to examine excellent H2O oxidation on nc-TiO2 electrodes in PEC cells. The stationary model, (H2O)3&OH(TiO2)9H reveals that the model surface provides catalytic H2O binding sites through hydrogen bonding, van der Waals and Coulombic interactions. The working model, [(H2O)3&OH(TiO2)9H]+ discloses to have a very narrow energy gap (0.3 eV) between HOMO and LUMO potentials, proving that PEC nc-TiO2 electrodes become conductive at photo-irradiated working conditions. DFT-simulation of stepwise oxidation of a hydroxide ion cluster model of OH-(H2O)3, proves that successive two-electron oxidation leads to hydroxyl radical clusters, which should give hydrogen peroxide as a precursor of oxygen molecules. Under working bias conditions of PEC cells, nc-TiO2 electrodes are now verified to become conductive by energy gap photo-excitation and the electrode surface provides powerful oxidizing sites for successive H2O oxidation to oxygen via hydrogen peroxide.

Combinations of TiO2 photocatalysts and various adsorbents have been widely studied for the adsorption and photocatalytic decomposition of gaseous pollutants such as volatile organic compounds (VOCs). Herein, a TiO2-zeolite-porous glass composite was prepared using melt-quenching and partial sintering, hydrothermal treatment, and drop coating for preparation of the porous glass support and X-zeolite and their combination with TiO2, respectively. The obtained composite comprised anatase phase TiO2, X-zeolite, and the porous glass support, which were combined at the micro to nanometer scales. The composite had a relatively high specific surface area of approximately 25 m2/g and exhibited a good adsorption capacity for 2-propanol. These data indicated that utilization of this particular phase-separated glass as the support was appropriate for the formation of the bulk photocatalyst-adsorbent composite. Importantly, the photocatalytic decomposition of adsorbed 2-propanol proceeded under UV light irradiation. The 2-propanol was oxidized to acetone and then trapped by the X-zeolite rather than being released to the atmosphere. Consequently, it was demonstrated that the micrometer-scaled combination of TiO2 and zeolite in the bulk form is very useful for achieving both the removal of gaseous organic pollutants and decreasing the emission of harmful intermediates.

A novel ionic liquid crystal (ILC) system (C(12)MImI/I(2)) with a smectic A phase used as an electrolyte for a dye-sensitized solar cell (DSSC) showed the higher short-circuit current density (J(SC)) and the higher light-to-electricity conversion efficiency than the system using the non-liquid crystalline ionic liquid (C(11)MImI/I(2)), due to the higher conductivity of ILC. To investigate charge transport properties of the electrolytes in detail, the exchange reaction-based diffusion coefficients (D(ex)) were evaluated. The larger D(ex) value of ILC supported that the higher conductivity of ILC is attributed to the enhancement of the exchange reaction between iodide species. As a result of formation of the two-dimensional electron conductive pathways organized by the localized I(3)- and I- at S(A) layers, the concentration of polyiodide species exemplified by I(m)- (m = 5, 7, ...) was higher in C(12)MImI/I(2). However, as the increment of the concentration of polyiodide species is less than that of D(ex), the contribution of a two-dimensional structure of the conductive pathway through the increase of collision frequency between iodide species was proposed. Furthermore, a quasi-solid-state ionic liquid crystal DSSC was successfully fabricated by employing a low molecular gelator. Addition of the 5.0 g/L gelator to ILC improved light-to-electricity conversion efficiency through the increase of J(SC) due to the enhancement of the conductivity in C(12)MImI/I(2)-gel.

The performance of dye-sensitized solar cells (DSCs) was compared before and after processing the TiO(2) electrodes by minute-order electrochemical reactions with metal nitrates, where the metals were Mg, Zn, Al, and La, in 2-propanol. An overcoating of metal hydroxide was formed without the need for a sintering process, and magnesium hydroxide was found to give the largest improvement in photovoltage, fill factor, and eventually overall conversion efficiency of the DSCs. To analyze the nature of the improvement, the diffusion coefficient (D) and electron lifetime (tau) were determined. While little influence of overcoating on D was seen, a correlation between the increase in tau and V(oc) was observed for the metals examined here. The remarkable improvement in the electron lifetime of the DSCs suggests that an overcoating with magnesium hydroxide species function as the blocking layers at the fluorine-doped tin oxide and TiO(2) interfaces, thus contributing to the suppression of electron leakage, i.e., recombination processes between unidirectional transporting electrons and poly-iodides such as tri-iodide in the processed TiO(2) photoelectrode systems. The increase in V(oc) can be explained by the increased electron density caused by the increase in electron lifetime.

TiO2 nanotubes (TNTs) with large aspect ratio and large specific surface area were prepared from P25 (Nippon Aerosil) and applied to dye-sensitized titanium dioxide solar cells (DSSCs). Optimization of fabrication conditions, i.e., pH of the starting paste, sintering temperature for the TiO2 electrodes, electrolyte compositions of DSSCs gave the high conversion efficiency with improved open circuit voltage (V(oc)) and fill factor (FF) when compared to DSSCs made of P25. The evaluation of dye adsorption and the photo-injected electron transport such as electron diffusion coefficient (D) and electron lifetime (tau) in TNTs electrodes revealed that the higher efficiency resulted from increase of electron density with keeping much longer tau in TNTs electrodes than in P25 electrodes.