Search

There is an increasing interest in organ-level 3D tissue constructs, owing to their mirroring of in vivo-like features. This has resulted in a wide range of preclinical applications to obtain cell- or tissue-specific responses. Additionally, the development and improvement of sophisticated technologies, such as organoid generation, microfluidics, hydrogel engineering, and 3D printing, have enhanced 3D tissue constructs to become more elaborate. In particular, recent studies have focused on including complex compartments, i.e., vascular and innervation structured 3D tissue constructs, which mimic the nature of the human body in that all tissues/organs are interconnected and physiological phenomena are mediated through vascular and neural systems. Here, the strategies are categorized according to the number of dimensions (0D, 1D, 2D, and 3D) of the starting materials for scaling up, and novel approaches to introduce increased complexity in 3D tissue constructs are highlighted. Recent advances in preclinical applications are also investigated to gain insight into the future direction of 3D tissue construct research. Overcoming the challenges in improving organ-level functional 3D tissue constructs both in vitro and in vivo will ultimately become a life-saving tool in the biomedical field., (© 2020 Wiley-VCH GmbH.)

In situ blood vessel regeneration through host stem/progenitor cell mobilization may hold great promise for vascular reconstruction. Neuropeptide substance P (SP) has been shown to accelerate tissue repair by endogenous cell mobilization and recruitment. This study was aimed to evaluate the vascular regeneration potential of SP and heparin co-tethered vascular grafts. Polycaprolactone (PCL), PCL/SP-conjugated poly(L-lactide-co-ε-caprolactone) (PLCL-SP) (SP), and PCL/PLCL-SP/heparin-conjugated PLCL (Hep/SP) vascular grafts were implanted as rat abdominal aorta substitutes for up to 2 weeks and 4 weeks. Ex vivo results delineate that heparin can improve the hemocompatibility and SP can recruit mesenchymal stem cells. Histological and immunohistochemical staining reveal higher cellular infiltration and homogeneous cell distribution in SP and Hep/SP grafts than that of the control grafts. At 4 weeks, SP and Hep/SP grafts show the presence of cobblestone-like cells on the luminal side, whereas the surface of PCL grafts remains bare. Immunoflourescence staining using von Willibrand factor (vWF) antibody shows improved endothelialization in SP and Hep/SP grafts compared with the PCL grafts. SP and Hep/SP grafts also exhibit more numbers of α-smooth muscle actin-positive cells and laminin + blood vessels than that of the control group. Evaluation of inflammatory response reveals that three groups did not differ in terms of the numbers of CD68 + macrophages, whereas SP and Hep/SP grafts show higher numbers of CD206 + macrophages. These results indicate that SP can induce endogenous tissue regeneration in cell-free grafts, which may be of great interest for regenerative medicine and tissue engineering applications. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 1669-1683, 2019., (© 2018 Wiley Periodicals, Inc.)

Background: To investigate whether human adipose-derived stem cells (hADSCs) seeded on multilayered poly (l-lactide- co -ɛ-caprolactone) (PLCL) sheets improve bladder function in a rat model of detrusor smooth muscle-removed bladder., Methods: Male rats were randomly divided into 4 groups: Normal, injury (detrusor smooth muscle-removed bladder), PLCL (detrusor smooth muscle-removed bladder implanted with PLCL sheets), and PLCL + ADSC (detrusor smooth muscle-removed bladder implanted with PLCL sheets seeded with hADSCs). Four weeks after the treatment, physiological, histological, immunohistochemical, and immunoblot analyses were performed., Results: hADSCs were compatible with PLCL sheets. Further, the physiological study of PLCL + ADSC group showed significant improvement in compliance and contractility suggesting the functional improvement of the bladder. Histological, immunohistochemical and immunoblot analyses revealed the uniform distribution of hADSCs in between PLCL sheets as well as differentiation of hADSCs into smooth muscle cells (SMC) which is illustrated by the expression of SMC markers., Conclusion: hADSCs seeded on the multilayered PLCL sheets has the potential to differentiate into SMC, thus facilitating the recovery of compliance and contractility of the injured bladder., Competing Interests: The authors declare that they have no conflict of interest.The animal studies were performed after receiving approval of the Institutional Animal Care and Use Committee (IACUC) in The Catholic University of Korea, Seoul, Korea (IACUC Approval No. 2013-0111-03).

We developed a highly elastic customized scaffold for soft tissue regeneration and combined them with bioactive hydrogels with stem cell-inducing ability. This was done to mimic mechanical properties of native soft tissues and improve the viability of transplanted cells as well as efficiency of tissue regeneration. The proposed study was aimed at evaluating various characteristics of scaffolds and investigating their tissue-regenerating ability. Finger-shaped porous scaffolds were successfully fabricated by an indirect 3D printing of poly (L-lactide-co-ɛ-caprolactone) (PLCL), which provides high elasticity for soft tissue engineering. In addition, a self-assembling peptide hydrogel coupled with substance P (RARADADARARADADA/RARADADARARADADA-substance P, RADA16/RADA16-SP) was used to accelerate angiogenesis and recruit intrinsic mesenchymal stem cells (MSCs). This study included three kinds of groups: Group I = PLCL scaffold with human dermal fibroblasts (HDFs) (P+C), Group II = PLCL scaffold with HDFs and RADA16 (P+C+R), and Group III = PLCL scaffold with HDFs, RADA16, and RADA16-SP (P+C+R+S). The samples were implanted into immunodeficient mice subcutaneously and harvested at 1 and 4 weeks. Tissue regeneration was evaluated by histological analysis with hematoxylin and eosin (H&E) and Masson's trichrome (MT) staining. The images showed that a large number of cells were recruited into the scaffolds, and collagen was deposited in the constructs of the P+C+R+S group. Additionally, recruitment of MSCs, angiogenesis, and collagen were observed by immunofluorescence staining. The results show that the P+C+R+S group had more type I and type III collagen, which are formed in soft tissues, and were deposited on the scaffold compared with the other groups. Moreover, more blood vessels and MSCs were induced in the P+C+R+S group than in those of the P + C and P+C+R groups. Consequently, the results suggest that the construct of the customized porous PLCL scaffold and RADA16/RADA16-SP hydrogel could be a good treatment modality to treat skin defects.

Electrospun scaffolds have been widely used in tissue engineering due to their similar structure to native extracellular matrices (ECM). However, one of the obstacles limiting the application of electrospun scaffolds for tissue engineering is the nano-sized pores, which inhibit cell infiltration into the scaffolds. To overcome this limitation, we approached to make layers which are consisted of cells onto the electrospun sheet and then tubular structure was constructed by rolling. We called this as 'Cell Matrix Engineering' because the electrospun sheets were combined with the cells to form one matrix. They maintained 3-D tubular structures well and their diameters were 4.1 mm (±0.1 mm). We compared the mechanical and biological properties of various vascular grafts with the electrospun PLCL sheets of different thickness. In these experiments, the vascular graft made with thin sheets showed a better cell proliferation and attachment than the grafts made with thick sheets because the thin layer allowed for more efficient mass transfer and better permeability than the thick layer. Culturing under physiological pulsatile flow condition was demonstrated in this work. These dynamic conditions provided the improved mass transport and aerobic cell metabolism. Therefore, the Cell Matrix Engineered vascular graft holds a great promise for clinical applications by overcoming the limitations associated with conventional scaffolds.

Produced through electrospinning, poly(l-lactide-co-caprolactone) (PLCL) membranes, which have a porous structure and are biodegradable, are of interest in various medical fields. The porous-structured electrospun membrane is particularly interesting because of several favorable properties as follows: it exudes fluid from the wound, does not build up under the wound covering, and does not cause wound desiccation. Moreover, extracellular matrix (ECM)-based structures derived by tissue decellularization have application as engineered tissue scaffolds and as supports for cellular regeneration. In particular, heart decellularized ECM (hdECM) has various pro-angiogenic factors that can induce angiogenesis for wound healing. In this regard, a nanofibrous electrospun hdECM-based hybrid scaffold (NEhdHS), which is a PLCL membrane, including hdECM as an active agent, was tested as a wound dressing to assess its fundamental biochemical and physical features in wound healing. Use of NEhdHS with its porous structure and pro-angiogenic factors is expected to provide an effective wound dressing and reduced scarring. We first demonstrate the effectiveness of a proposed decellularization protocol through analysis of dECM components and describe the mechanical properties of the fabricated NEhdHS. Next, we present an in vitro angiogenesis analysis of the NEhdHS, using a coculture system with human dermal fibroblasts and human umbilical vein endothelial cells; the results of which confirm its biocompatibility and show that the NEhdHS can significantly enhance angiogenesis over that obtained from PLCL or gelatin-containing PLCL scaffolds. We also studied the effectiveness of the NEhdHS in vivo. Using a rat excisional wound-splinting model, we show that covering the upper part of the wound with NEhdHS significantly reduces scarring in the wound healing process compared to that with PLCL or gelatin-containing PLCL scaffolds. Based upon its properties, we conclude that the NEhdHS has potential for application in wound dressing.

Poly(lactic-co-glycolic acid) (PLGA) scaffolds encapsulated with substance P (SP) and dexamethasone (Dex) by the supercritical CO 2 foaming method were fabricated to treat calvarial bone. We compared the release profiles of SP and Dex according to the incorporation methods using encapsulation or dipping. Ninety percent of the SP or Dex molecules in the scaffolds prepared by the encapsulating method were released by day 14 or day 6, respectively. In vivo real-time assays for human mesenchymal stem cell (hMSC) tracking were performed to confirm the MSC recruitment abilities of the scaffolds. The results showed that the optical intensity of the SP-encapsulated group was 2.59 times higher than that of the phosphate-buffered saline group and 1.3 times higher than that of the SP-dipping group. Furthermore, we compared the angiogenesis activity of the scaffolds. In the SP-encapsulated group, 72.9  ±  2.6% of the vessels showed matured features by 1 week, and it increased to 82.0  ±  4.6% after 4 weeks. We implanted the scaffolds into rat calvarial defects. After 24 weeks, SP- and Dex-encapsulated scaffolds showed 67.1% and 26.2% higher bone formation than those of the Dex-encapsulated group and SP-encapsulated group, respectively, and they formed 36.1% more bone volume compared with the SP- and Dex-dipped scaffolds. Consequently, the results of this study suggest that SP- and Dex-encapsulated scaffolds made by the supercritical CO 2 foaming method could be a good treatment modality to treat critical bone defects without cell transplantation by recruiting autologous stem cells and forming new bone tissues. Copyright © 2017 John Wiley & Sons, Ltd., (Copyright © 2017 John Wiley & Sons, Ltd.)

Stem cells are a promising solution for the treatment of a variety of diseases. However, the limited survival and engraftment of transplanted cells due to a hostile ischemic environment is a bottleneck for effective utilization and commercialization. Within this environment, the majority of transplanted cells undergo apoptosis prior to participating in lineage differentiation and cellular integration. Therefore, in order to maximize the clinical utility of stem/progenitor cells, strategies must be employed to increase their adhesion, retention, and engraftment in vivo. Here, we reviewed key strategies that are being adopted to enhance the survival, retention, and engraftment of transplanted stem cells through the manipulation of both the stem cells and the surrounding environment. We describe how preconditioning of cells or cell manipulations strategies can enhance stem cell survival and engraftment after transplantation. We also discuss how biomaterials can enhance the function of stem cells for effective tissue regeneration. Biomaterials can incorporate or mimic extracellular function (ECM) function and enhance survival or differentiation of transplanted cells in vivo. Biomaterials can also promote angiogenesis, enhance engraftment and differentiation, and accelerate electromechanical integration of transplanted stem cells. Insight gained from this review may direct the development of future investigations and clinical trials., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

A novel tissue-engineered trachea was developed with appropriate mechanical behavior and substantial regeneration of tracheal cartilage. We designed hollow bellows scaffold as a framework of a tissue-engineered trachea and demonstrated a reliable method for three-dimensional (3D) printing of monolithic bellows scaffold. We also functionalized gelatin sponge to allow sustained release of TGF-β1 for stimulating tracheal cartilage regeneration and confirmed that functionalized gelatin sponge induces cartilaginous tissue formation in vitro. A tissue-engineered trachea was then created by assembling chondrocytes-seeded functionalized gelatin sponges into the grooves of bellows scaffold and it showed very similar mechanical behavior to that of native trachea along with substantial regeneration of tracheal cartilage in vivo. The tissue-engineered trachea developed here represents a novel concept of tracheal substitute with appropriate mechanical behavior similar to native trachea for use in reconstruction of tracheal stenosis., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Mimicking the native tissue microenvironment is critical for effective tissue regeneration. Mechanical cues and sustained biological cues are important factors, particularly in load-bearing tissues such as articular cartilage or bone. Carriers including hydrogels and nanoparticles have been investigated to achieve sustained release of protein drugs. However, it is difficult to apply such carriers alone as scaffolds for cartilage regeneration because of their weak mechanical properties, and they must be combined with other biomaterials that have adequate mechanical strength. In this study, we developed the multifunctional scaffold which has similar mechanical properties to those of native cartilage and encapsulates TGF-β3 for chondrogenesis. In our previous work, we confirmed that poly(lactide-co-caprolacton) (PLCL) did not foam when exposed to supercritical CO2 below 45°C. Here, we used a supercritical carbon dioxide (scCO2)-1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) co-solvent system to facilitate processing under mild conditions because high temperature causes protein denaturation and decreases bioactivity of the protein. This processing made it possible to fabricate a TGF-β3 encapsulated elastic porous PLCL scaffold at 37°C. We investigated the tissue regeneration efficiency of the TGF-β3 encapsulated PLCL scaffold using human adipose-derived stem cells (ADSCs) in vitro and in vivo (Groups; i. PLCL scaffold+Fibrin gel+TGF-β3, ii. TGF-β3 encapsulated PLCL scaffold+Fibrin gel, iii. TGF-β3 encapsulated PLCL scaffold). We evaluated the chondrogenic abilities of the scaffolds at 4, 8, and 12weeks after subcutaneous implantation of the constructs in immune-deficient mice. Based on TGF-β3 release studies, we confirmed that TGF-β3 molecules were released by 8weeks and remained in the PLCL matrix. Explants of TGF-β3 encapsulated scaffolds by a co-solvent system exhibited distinct improvement in the compressive E-modulus and deposition of extracellular matrix. Furthermore, long-term delivery of TGF-β3 formed a hyaline cartilage-specific lacunae structure and prevented the hypertrophy of differentiated chondrocytes. TGF-β3 encapsulated PLCL scaffolds would be useful as functional scaffolds for cartilage tissue engineering., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Electrospun nanofibrous scaffolds have several advantages, such as an extremely high surface-to-volume ratio, tunable porosity, and malleability to conform over a wide variety of sizes and shapes. However, there are limitations to culturing the cells on the scaffold, including the inability of the cells to infiltrate because of the scaffold's nano-sized pores. To overcome the limitations, we developed a controlled pulsatile bioreactor that produces static and dynamic flow, which improves transfer of such nutrients and oxygen, and a tubular-shaped vascular graft using cell matrix engineering. Electrospun scaffolds were seeded with smooth muscle cells (SMCs), cultured under dynamic or static conditions for 14 days, and analyzed. Mechanical examination revealed higher burst strength in the vascular grafts cultured under dynamic conditions than under static conditions. Also, immunohistology stain for alpa smooth muscle actin showed the difference of SMC distribution and existence on the scaffold between the static and dynamic culture conditions. The higher proliferation rate of SMCs in dynamic culture rather than static culture could be explained by the design of the bioreactor which mimics the physical environment such as media flow and pressure through the lumen of the construct. This supports regulation of collagen and leads to a significant increase in tensile strength of the engineered tissues. These results showed that the SMCs/electrospinning poly (lactide-co-ε-caprolactone) scaffold constructs formed tubular-shaped vascular grafts and could be useful in vascular tissue engineering., (© 2013 Wiley Periodicals, Inc. and International Center for Artificial Organs and Transplantation.)

Design of macroporous synthetic grafts that can promote infiltration of cells, their differentiation, and synthesis of bone-specific extracellular matrix is a key determinant for in vivo bone tissue regeneration and repair. In this study, we investigated the effect of the microarchitecture of the scaffold on osteogenic differentiation of human mesenchymal stem cells (hMSCs). Poly(ethylene glycol) diacrylate-co-N-acryloyl 6-aminocaproic acid cryogels were fabricated to have either a pore network consisting of cellular, randomly oriented pores (termed 'spongy') or a pore network consisting of lamellar columns (termed 'columnar'), with both cryogel types showing a similar porosity. Both spongy and columnar cryogels supported comparable levels of cell viability and proliferation of hMSCs in vitro. However, spongy cryogels promoted osteogenic differentiation to a greater extent than their columnar counterparts, as evidenced by increased alkaline phosphatase activity and osteoblastic gene expression over 21 days post culture. Leveraging upon our previous work, we further evaluated the ability of these synthetic scaffolds in conjunction with mineralisation to promote ectopic bone formation upon subcutaneous implantation in nude rats. Mineralised spongy and columnar cryogels, both in the presence and absence of exogenous hMSCs, promoted ectopic bone formation in vivo. No such bone formation was observed in acellular cryogels devoid of mineralisation, with extensive host cell infiltration and vascularisation in columnar cryogels, and negligible infiltration into spongy cryogels. Our results thus present a novel method to tune the microarchitecture of porous polymeric scaffolds, in addition to suggesting their efficacy as synthetic bone grafts.

Adipose-derived stem cells (ASCs) have been the subject of many tissue-engineering studies, mainly because of their multipotential properties. We have focused on the potential of human ASCs (hASCs) for smooth muscle cell (SMC) differentiation in cardiovascular tissue engineering. In this study, we investigated the combined effect of differentiation factors along with strain utilizing a customized device on hASCs proliferation and consequent differentiation into SMCs on an elastic nanofibrous scaffold. The cell proliferation increased in strain-stimulated culture and was more affected by media composition as compared to in static culture. Differentiation factors did not have an influence on SM α-actin (α-SMA) and myosin heavy chain (MHC) expression in static culture. However, α-SMA and MHC expression were affected by differentiation factors in strain culture, in particular, showing that treatment with retinoic acid significantly increased the expression of α-SMA (3.6-fold) and MHC (2-fold) as compared to strain alone. This study demonstrated the synergic effect of strain and biochemical factor on the SMC differentiation of hASCs and provided a useful method for the application of stem cells in mechano-active tissue engineering.

There is an essential demand for tissue-engineered autologous small-diameter vascular grafts, which offer temporary supports and guides for vascular tissue organization, repair and remodeling. This study reports on the effect of collagen/smooth muscle cells (SMCs) mixtures under dynamic cultures and SMC-endothelial cell (ECs) co-culture on cell proliferation, uniform cell distribution, extracellular matrix deposition, and endothelial cells monolayer formation in tissue-engineered tubular arterial constructs of 4 mm inner diameter. Rabbit aortic SMCs were infiltrated with collagen solution in poly(L-lactide-co-ϵ-caprolactone) (PLCL) scaffolds under vacuum to form collagenous gel and subjected to dynamic strain by culturing them in a dynamic perfusion bioreactor. The construct lumen was subsequently seeded with ECs and experiments were completed to create ECs-SMCs co-culture constructs. The collagen/SMCs incorporated elastic scaffold cultured under dynamic culture conditions promoted matrix deposition, leading to the development of tissue-engineered vascular constructs, and induced SMC to have more uniform cell distribution. Scanning electron microscopic examination and von Willebrand Factor staining demonstrated the presence of ECs spread over the lumen. Quantitative analysis of elastin contents demonstrated that the engineered vessels acquired similar elastin contents as native arteries. The collagen/SMCs/ECs incorporated PLCL scaffolds under dynamic culture conditions can be used as a scaffold for tissue engineering to facilitate small-diameter vascular-tissue formation.

Recently, the ligament-bone (LTB) junction has been emphasized for the effective transmission of mechanical force and the reduction in stress concentration between the soft ligament and hard bone tissue. The aim of this study was to regenerate an integrated LTB interface by inoculating LTB-relevant cells, isolated from fibrocartilage (FC) or ligament (LIG), separately into each designated region in a single porous cylindrical PLCL scaffold. An injectable, heparin-based hydrogel that has proved to be effective in the culture of chondrocytes as well as the sustained release of growth factor was employed to locally deliver fibrochondrocytes and osteoinductive bone morphogenetic protein-2 (BMP-2) into the FC region, to promote FC regeneration. In in vitro experiments the hydrogel-combined FC systems produced significantly larger amounts of calcium and glycosaminoglycans (GAGs), but less collagen and DNA than FC samples without the hydrogel and all LIG samples. After in vivo subcutaneous implantation in mice for 8 weeks the secreted calcium and GAG contents of the hydrogel-containing FC samples were superior or similar to those of the in vitro hydrogel-containing FC samples at 6 weeks. As a result of the enhanced production of calcium and GAG, the in vivo hydrogel-containing FC samples produced the highest compressive modulus among all samples. Histological and immunofluorescence analysis as well as elemental analysis also confirmed a denser and more homogeneous distribution of calcium, GAG, osteocalcin and neovascularization marker in the in vitro/in vivo hydrogel-containing FC systems than those without hydrogel. These results also show the beneficial effects of BMP-2 added using the hydrogel. In summary, the use of a heparin-based hydrogel for the local delivery of fibrochondrocytes and BMP-2 could accelerate the maturation and differentiation of LTB-specific FC tissues, and it was also possible to recreate the unique stratification of calcified FC and LIG tissues in a single porous PLCL scaffold in terms of both biochemical and biomechanical properties., (Copyright © 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Our previous studies showed that a mechano-active scaffold made of poly(L-lactide-co-epsilon-caprolactone) (PLCL) exhibited a high potential to realize the formation of a functional, engineered cartilage in vitro. This animal study therefore was designed to investigate the feasibility of repairing on osteochondral defect with the use of bone marrow-derived mesenchymal stem cells (BMSCs) incorporated with a PLCL scaffold. Rabbit BMSCs, isolated and subsequently cultured in monolayer, were seeded into a porous PLCL scaffold sponge following an implantation onto a full-thickness osteochondral defect (diameter of 4.5 mm, depth of 5 mm) that was artificially created on the medial femoral condyles at a high load-bearing site on a rabbit's knee joint. Time-dependent healing of the defect was evaluated by macroscopic, histological examinations at both 3- and 6-month-implantations, respectively. A PLCL sponge incorporated with BMSCs exhibited sufficient structural support, resulting in new osteochondral tissue regeneration: a physiologically well-integrated subchondral bone formation, a hyaline cartilage-like morphology containing chondrocytes surrounded by abundant cartilaginous matrices. In addition, quantitative biochemical assays also demonstrated high potential for the synthesis of sulfated glycosaminoglycan and collagen, both of which are biomolecules essential to extracelluar matrix in normal cartilage tissue. In contrast, defects filled with cell-free PLCL scaffold or left empty showed a very limited potential for regeneration. Our findings suggest that a composite of PLCL-based sponge scaffold and BMSCs promote the repair of osteochondral defects at high load-bearing sites in adult rabbits., ((c) 2010 Wiley Periodicals, Inc.)

Current surgical therapy for diseased vessels less than 6mm in diameter involves bypass grafting with autologous arteries or veins. Although this surgical practice is common, it has significant limitations and complications, such as occlusion, intimal hyperplasia and compliance mismatch. As a result, cardiovascular biomaterials research has been motivated to develop tissue-engineered blood vessel substitutes. In this study, vascular tissue engineering scaffolds were fabricated using two different approaches, namely melt spinning and electrospinning. Small diameter tubes were fabricated from an elastomeric bioresorbable 50:50 poly(l-lactide-co-epsilon-caprolactone) copolymer having dimensions of 5mm in diameter and porosity of over 75%. Scaffolds electrospun from two different solvents, acetone and 1,1,1,3,3,3-hexafluoro-2-propanol were compared in terms of their morphology, mechanical properties and cell viability. Overall, the mechanical properties of the prototype tubes exceeded the transverse tensile values of natural arteries of similar caliber. In addition to spinning the polymer separately into melt-spun and electrospun constructs, the approach in this study has successfully demonstrated that these two techniques can be combined to produce double-layered tubular scaffolds containing both melt-spun macrofibers (<200microm in diameter) and electrospun submicron fibers (>400nm in diameter). Since the vascular wall has a complex multilayered architecture and unique mechanical properties, there remain several significant challenges before a successful tissue-engineered artery is achieved., (Copyright 2010. Published by Elsevier Ltd.)

Tissue-engineered vascular grafts have been investigated as a substitute for prosthetic vascular grafts. The current scaffolds have several limitations due to weak mechanical properties in withstanding the pressure of blood vessel. A gel-spinning molding device including three-separate drivers that make a cylindrical shaft turn on its axis, orbit, and concurrently move up and down was developed for preparing seamless fibrous tubular scaffolds for vascular grafts. A seamless double-layered tubular scaffold, which was composed of an outer fibrous network and inner porous layer, was fabricated by using the device for the spinning of poly(L-lactide-co-caprolactone) (PLCL, 50:50) solution as a gel state on a rotating cylindrical shaft that had been dip-coated with the mixture of PLCL solution and NaCl particles. A scaffold that had an inner layer fabricated with 30% salts, below 20 mum in salt size, and more than 100 microm in thickness, was found to be optimal from a blood leakage test. The burst pressures of the scaffolds were more than 900 mmHg. The scaffolds exhibited 550-670% elongation-at-break. The measured circumferential and longitudinal tensile strengths of the scaffolds were 3.62 +/- 0.68 and 2.64 +/- 0.41 MPa, respectively. The suture retention strength of the scaffold was measured to be 7.68 +/- 0.75 N. These mechanically strong and elastic properties of the newly developed scaffolds provide an important basis for blood vessel tissue engineering.

Biodegradable tubular scaffolds have been developed for vascular graft application. This study was focused to improve the adhesion and proliferation of vascular smooth muscle cells (SMCs) in a tubular scaffold. Tubular scaffolds (ID 4 mm, OD 6 mm) were fabricated from a biodegradable elastic polymer, poly(L-lactide-co-epsilon-caprolactone) (PLCL) (50:50, M(n) 1.58 x 10(5)), by an extrusion/particulate leaching method. SMCs suspended in a collagen solution were infiltrated in tubular PLCL scaffolds under vacuum and incubated for 1 h at 37 degrees C to form a collagenous gel. Results from SEM image analysis showed that collagen was infiltrated into the inside of the scaffolds. Cell adhesion and proliferation rate increased in collagen/SMC-incorporated tubular PLCL scaffolds as compared with the scaffolds in which only SMCs were seeded. From SEM image and histological analysis, we further found that SMCs grew on the inside as well as on the surface of collagen/SMCs-incorporated scaffolds and the cells continued to grow as a monolayer on collagen fibers. In particular, cell proliferation and elastin contents were the highest in a PLCL scaffold with 50-100 microm pore size than any other scaffolds used in this experiment. A collagen/SMC-incorporated PLCL scaffold may support SMC growth and functions and can be used as a scaffold for tissue engineering to facilitate small-diameter vascular-tissue formation., ((c) Koninklijke Brill NV, Leiden, 2009)

Compressive mechanical stimuli are crucial in regenerating cartilage with tissue engineering, which creates a need for scaffolds that can maintain their mechanical integrity while delivering mechanical signals to adherent cells during strain applications. With these goals in mind, the aim of this study was to develop a mechano-active scaffold that facilitated effective cartilaginous tissue formation under dynamic physiological environments. Using a gel-pressing method, we fabricated a biodegradable and highly-elastic scaffold from poly(L-lactide-co-epsilon-caprolactone) (PLCL; 5:5), with 85% porosity and a 300-500-microm pore size, and we compared it to control scaffolds made of rigid polylactide (PLA) or poly(lactide-co-glycolide) (PLGA). After tensile mechanical tests and recovery tests confirmed the elasticity of the PLCL scaffolds, we seeded them with rabbit chondrocytes, cultured them in vitro, and subcutaneously implanted them into nude mice for up to eight weeks. The PLCL scaffolds possessed a completely rubber-like elasticity, were easily twisted and bent, and exhibited an almost complete (over 97%) recovery from applied strain (up to 500%); the control PLA scaffolds showed little recovery. In vitro and in vivo accumulations of extracellular matrix on the cell-PLCL constructs demonstrated that they could not only sustain but also significantly enhance chondrogenic differentiation. Moreover, the mechanical stimulation of the dynamic in vivo environment promoted deposition of the chondral extracellular matrix onto the PLCL. In contrast, on the PLA scaffolds, most of the chondrocytes had de-differentiated and formed fibrous tissues. In a rabbit defect model, the groups treated with PLCL scaffolds exhibited significantly enhanced cartilage regeneration compared to groups harboring an empty control or PLGA scaffolds. These results indicated that the mechano-active PLCL scaffolds effectively delivered mechanical signals associated with biological environments to adherent chondrocytes, suggesting that these elastic PLCL scaffolds could successfully be used for cartilage regeneration.

It is known that complex loading is involved in the development and maintenance of articular cartilage in the body. It means the compressive mechanical stimulation is a very important factor for formation of articular cartilage using a tissue-engineering technique. The objective of this study is to engineer cartilaginous constructs with mechano-active scaffolds and to evaluate the effect of dynamic compression for regeneration of cartilage. The mechano-active scaffolds were prepared from a very elastic poly(L-lactide-co-epsilon-caprolactone) (PLCL) with 85% porosity and 300-500 mum pore size using a gel-pressing method. The scaffold was seeded with 2 x 10(6) chondrocytes and the continuous compressive deformation of 5% strain was applied with 0.1 Hz for 10 days and 24 days, respectively. Then, the chondrocytes-seeded constructs were implanted subcutaneously into nude mice. Mechano-active scaffolds with complete rubber-like elasticity showed almost complete (over 97%) recovery at an applied strain of up to 500%. The amount of chondral extracellular matrix was increased significantly by mechanical stimulation on the highly elastic mechano-active scaffolds. Histological analysis showed the mechanically stimulated implants formed mature and well-developed cartilaginous tissue, as evidenced by the chondrocytes within lacunae and the abundant accumulation of sulfated GAGs. However, unhealthy lacunae shapes and hypertrophy forms were observed in the implants stimulated mechanically for 24 days, compared with those stimulated for 10 days. In conclusion, the proper periodical application of dynamic compression can encourage chondrocytes to maintain their phenotypes and enhance the production of GAGs, which would improve the quality of cartilaginous tissue formed both in vitro and in vivo.

There have been many studies published on bi-layered osteochondral scaffolds that can induce tissue ingrowth for cartilage and bone. However, delivering different signals to each tissue effectively and enabling maturation into complex composite tissues remain challenging. In this study, an osteochondral composite scaffold was fabricated by combining a sintering method and a gel pressing method with poly(lactide-co-glycolide), beta-tricalcium phosphate, and poly(lactide-co-caprolactone). The composite scaffold constituted a poly(lactide-co-glycolide)/beta-tricalcium phosphate scaffold, which has osteoconduction activity for bone regeneration, and an elastic poly(lactide-co-caprolactone) scaffold, which has mechano-active properties for cartilage regeneration. To examine mechanical and biological properties, tensile tests, porosimetry, electron microscopy, and in vitro and in vivo experiments were performed. From the results, we confirmed that the scaffold had a homogeneously interconnected porous structure without a skin layer that exhibited exposed bioceramics onto the scaffold surface. Furthermore, it was shown that poly(lactide-co-glycolide)/beta-tricalcium phosphate of the osteochondral composite scaffold improved osteogenic differentiation and bone tissue formation. Also, chondrogenic differentiation of seeded cells was sustained on the highly elastic poly(lactide-co-caprolactone) of the osteochondral composite scaffold, and the amount of chondral extracellular matrix was increased significantly. Consequently, our osteochondral composite scaffolds may have the appropriate physiological and biological properties for regeneration of osteochondral composites. [ABSTRACT FROM PUBLISHER]

Synthetic vessel grafts have been used as vascular substitutes for cardiovascular bypass procedures. In this study, we developed a novel tubular double-layered poly(l-lactide-co-ϵ-caprolactone) scaffold that did not require pretreatment with cell seeding by promoting autologous tissue regeneration by inducing the proliferation and differentiation of endothelial and smooth muscle progenitor cells after implantation. The patency and mechanical properties were maintained for one year after implantation, although 95% of the poly(l-lactide-co-ϵ-caprolactone) scaffolds had degraded. After this period, there was a lining of endothelial cells, an accumulation of collagen and elastin, and the development of neovascularization inside the poly(l-lactide-co-ϵ-caprolactone). [ABSTRACT FROM AUTHOR]

There is an essential demand for tissue-engineered autologous small-diameter vascular grafts, which offer temporary supports and guides for vascular tissue organization, repair and remodeling. This study reports on the effect of collagen/smooth muscle cells (SMCs) mixtures under dynamic cultures and SMC-endothelial cell (ECs) co-culture on cell proliferation, uniform cell distribution, extracellular matrix deposition, and endothelial cells monolayer formation in tissue-engineered tubular arterial constructs of 4 mm inner diame-ter. Rabbit aortic SMCs were infiltrated with collagen solution in poly(L-lactide-co-e-caprolactone) (PLCL) scaffolds under vacuum to form collagenous gel and subjected to dynamic strain by culturing them in a dynamic perfusion bioreactor. The construct lumen was subsequently seeded with ECs and experiments were completed to create ECs-SMCs co-culture constructs. The collagen/SMCs incorporated elastic scaf-fold cultured under dynamic culture conditions promoted matrix deposition, leading to the development of tissue-engineered vascular constructs, and induced SMC to have more uniform cell distribution. Scanning electron microscopic examination and von Willebrand Factor staining demonstrated the presence of ECs spread over the lumen. Quantitative analysis of elastin contents demonstrated that the engineered vessels acquired similar elastin contents as native arteries. The collagen/SMCs/ECs incorporated PLCL scaffolds under dynamic culture conditions can be used as a scaffold for tissue engineering to facilitate small-diameter vascular-tissue formation. [ABSTRACT FROM AUTHOR]

Adipose-derived stem cells (ASCs) have been the subject of many tissue-engineering studies, mainly be-cause of their multipotential properties. We have focused on the potential of human ASCs (hASCs) for smooth muscle cell (SMC) differentiation in cardiovascular tissue engineering. In this study, we investigated the combined effect of differentiation factors along with strain utilizing a customized device on hASCs pro-liferation and consequent differentiation into SMCs on an elastic nanofibrous scaffold. The cell proliferation increased in strain-stimulated culture and was more affected by media composition as compared to in static culture. Differentiation factors did not have an influence on SM α-actin (α-SMA) and myosin heavy chain (MHC) expression in static culture. However, α-SMA and MHC expression were affected by differentiation factors in strain culture, in particular, showing that treatment with retinoic acid significantly increased the expression of α-SMA (3.6-fold) and MHC (2-fold) as compared to strain alone. This study demonstrated the synergic effect of strain and biochemical factor on the SMC differentiation of hASCs and provided a useful method for the application of stem cells in mechano-active tissue engineering. [ABSTRACT FROM AUTHOR]

A flexible and bioactive scaffold for adipose tissue engineering was fabricated and evaluated by dual nozzle three-dimensional printing. A highly elastic poly (L-lactide-co-ε-caprolactone) (PLCL) copolymer, which acted as the main scaffolding, and human adipose tissue derived decellularized extracellular matrix (dECM) hydrogels were used as the printing inks to form the scaffolds. To prepare the three-dimensional (3D) scaffolds, the PLCL co-polymer was printed with a hot melting extruder system while retaining its physical character, similar to adipose tissue, which is beneficial for regeneration. Moreover, to promote adipogenic differentiation and angiogenesis, adipose tissue-derived dECM was used. To optimize the printability of the hydrogel inks, a mixture of collagen type I and dECM hydrogels was used. Furthermore, we examined the adipose tissue formation and angiogenesis of the PLCL/dECM complex scaffold. From in vivo experiments, it was observed that the matured adipose-like tissue structures were abundant, and the number of matured capillaries was remarkably higher in the hydrogel–PLCL group than in the PLCL-only group. Moreover, a higher expression of M2 macrophages, which are known to be involved in the remodeling and regeneration of tissues, was detected in the hydrogel–PLCL group by immunofluorescence analysis. Based on these results, we suggest that our PLCL/dECM fabricated by a dual 3D printing system will be useful for the treatment of large volume fat tissue regeneration. [ABSTRACT FROM AUTHOR]