Search

Critical-size bone defects, which require large-volume tissue reconstruction, remain a clinical challenge. Bone engineering has the potential to provide new treatment concepts, yet clinical translation requires anatomically and physiologically relevant preclinical models. The ovine critical-size long-bone defect model has been validated in numerous studies as a preclinical tool for evaluating both conventional and novel bone-engineering concepts. With sufficient training and experience in large-animal studies, it is a technically feasible procedure with a high level of reproducibility when appropriate preoperative and postoperative management protocols are followed. The model can be established by following a procedure that includes the following stages: (i) preoperative planning and preparation, (ii) the surgical approach, (iii) postoperative management, and (iv) postmortem analysis. Using this model, full results for peer-reviewed publication can be attained within 2 years. In this protocol, we comprehensively describe how to establish proficiency using the preclinical model for the evaluation of a range of bone defect reconstruction options.

Bone metastases frequently occur in the advanced stages of breast cancer. At this stage, the disease is deemed incurable. To date, the mechanisms of breast cancer-related metastasis to bone are poorly understood. This may be attributed to the lack of appropriate animal models to investigate the complex cancer cell-bone interactions. In this study, two established tissue-engineered bone constructs (TEBCs) were applied to a breast cancer-related metastasis model. A cylindrical medical-grade polycaprolactone-tricalcium phosphate scaffold produced by fused deposition modelling (scaffold 1) was compared with a tubular calcium phosphate-coated polycaprolactone scaffold fabricated by solution electrospinning (scaffold 2) for their potential to generate ectopic humanised bone in NOD/SCID mice. While scaffold 1 was found not suitable to generate a sufficient amount of ectopic bone tissue due to poor ectopic integration, scaffold 2 showed excellent integration into the host tissue, leading to bone formation. To mimic breast cancer cell colonisation to the bone, MDA-MB-231, SUM1315, and MDA-MB-231BO breast cancer cells were cultured in polyethylene glycol-based hydrogels and implanted adjacent to the TEBCs. Histological analysis indicated that the breast cancer cells induced an osteoclastic reaction in the TEBCs, demonstrating analogies to breast cancer-related bone metastasis seen in patients., (Copyright © 2017 John Wiley & Sons, Ltd.)

Hyaline cartilage displays a limited regenerative potential. Consequently, therapeutic approaches have been developed to treat focal cartilage lesions. Larger-sized lesions are commonly treated by osteochondral grafting/mosaicplasty, autologous chondrocyte implantation (ACI) or matrix-induced chondrocyte implantation (MACI). As an alternative cell source to chondrocytes, multipotent mesenchymal stem cells (MSCs) are regarded a promising option. We therefore investigated the feasibility of pre-differentiating human MSCs incorporated in hydrogels clinically applied for MACI (CaReS®). MSC-laden hydrogels were cast and cultured over 10 days in a defined chondrogenic differentiation medium supplemented with TGF-β1. This was followed by an 11-day culture in TGF-β1 free media. After 21 days, considerable contraction of the hydrogels was observed. Histochemistry showed cells of a chondrocyte-like morphology embedded in a proteoglycan-rich extracellular matrix. Real-time polymerase chain reaction (RT-PCR) analysis showed the expression of chondrogenic marker genes, such as collagen type II and aggrecan. In summary, we demonstrate that chondrogenic differentiation of human mesenchymal stem cells embedded in collagen type I hydrogels can be induced under the influence of TGF-β1 over a period of 10 days.

The transplantation of autologous bone graft as a treatment for large bone defects has the limitation of harvesting co-morbidity and limited availability. This drives the orthopaedic research community to develop bone graft substitutes. Routinely, supra-physiological doses of bone morphogenetic proteins (BMPs) are applied perpetuating concerns over undesired side effects and cost of BMPs. We therefore aimed to design a composite scaffold that allows maintenance of protein bioactivity and enhances growth factor retention at the implantation site. Critical-sized defects in sheep tibiae were treated with the autograft and with two dosages of rhBMP-7, 3.5 mg and 1.75 mg, embedded in a slowly degradable medical grade poly(ε-caprolactone) (PCL) scaffold with β-tricalcium phosphate microparticles (mPCL-TCP). Specimens were characterised by biomechanical testing, microcomputed tomography and histology. Bridging was observed within 3 months for the autograft and both rhBMP-7 treatments. No significant difference was observed between the low and high rhBMP-7 dosages or between any of the rhBMP-7 groups and autograft implantation. Scaffolds alone did not induce comparable levels of bone formation compared to the autograft and rhBMP-7 groups. In summary, the mPCL-TCP scaffold with the lower rhBMP-7 dose led to equivalent results to autograft transplantation or the high BMP dosage. Our data suggest a promising clinical future for BMP application in scaffold-based bone tissue engineering, lowering and optimising the amount of required BMP., (Crown Copyright © 2013. Published by Elsevier Ltd. All rights reserved.)

The reconstruction of large defects (>10 mm) in humans usually relies on bone graft transplantation. Limiting factors include availability of graft material, comorbidity, and insufficient integration into the damaged bone. We compare the gold standard autograft with biodegradable composite scaffolds consisting of medical-grade polycaprolactone and tricalcium phosphate combined with autologous bone marrow-derived mesenchymal stem cells (MSCs) or recombinant human bone morphogenetic protein 7 (rhBMP-7). Critical-sized defects in sheep--a model closely resembling human bone formation and structure--were treated with autograft, rhBMP-7, or MSCs. Bridging was observed within 3 months for both the autograft and the rhBMP-7 treatment. After 12 months, biomechanical analysis and microcomputed tomography imaging showed significantly greater bone formation and superior strength for the biomaterial scaffolds loaded with rhBMP-7 compared to the autograft. Axial bone distribution was greater at the interfaces. With rhBMP-7, at 3 months, the radial bone distribution within the scaffolds was homogeneous. At 12 months, however, significantly more bone was found in the scaffold architecture, indicating bone remodeling. Scaffolds alone or with MSC inclusion did not induce levels of bone formation comparable to those of the autograft and rhBMP-7 groups. Applied clinically, this approach using rhBMP-7 could overcome autograft-associated limitations.

Current approaches for segmental bone defect reconstruction are restricted to autografts and allografts which possess osteoconductive, osteoinductive and osteogenic properties, but face significant disadvantages. The objective of this study was to compare the regenerative potential of scaffolds with different material composition but similar mechanical properties to autologous bone graft from the iliac crest in an ovine segmental defect model. After 12 weeks, in vivo specimens were analysed by X-ray imaging, torsion testing, micro-computed tomography and histology to assess amount, strength and structure of the newly formed bone. The highest amounts of bone neoformation with highest torsional moment values were observed in the autograft group and the lowest in the medical grade polycaprolactone and tricalcium phosphate composite group. The study results suggest that scaffolds based on aliphatic polyesters and ceramics, which are considered biologically inactive materials, induce only limited new bone formation but could be an equivalent alternative to autologous bone when combined with a biologically active stimulus such as bone morphogenetic proteins.

Recently, research has focused on bone marrow derived multipotent mesenchymal precursor cells (MPC) and osteoblasts (OB) for clinical use in bone engineering. Prior to clinical application, cell based treatment concepts need to be evaluated in preclinical, large animal models. Sheep in particular are considered a valid model for orthopaedic and trauma related research. However, only sheep aged > 6 years show secondary osteon formation characteristic of human bone. Osteogenic cells isolated from animals of this age group remain poorly characterized. In the present study, ex vivo expanded MPC isolated from ovine bone marrow proliferated at a higher rate than OB derived from tibial compact bone as assessed in standard 2D cultures. MPC expressed the respective phenotypic profile typical for different mesenchymal cell populations (CD14(-)/CD31(-)/CD45(-)/CD29(+)/CD44(+)/CD166(+)) and showed a multilineage differentiation potential. When compared to OB, MPC had a higher mineralization potential under standard osteogenic culture conditions and expressed typical bone related markers such as osteocalcin, osteonectin and type I collagen at the mRNA and protein level. After 4 weeks in 3D culture, MPC constructs demonstrated higher cell density and mineralization, whilst cell viability on the scaffolds was assessed > 90%. Cells displayed a spindle-like morphology and formed interconnected networks. In contrast, when implanted subcutaneously into NOD/SCID mice, MPC presented a lower osteogenic potential than OB. In summary, this study provides a detailed characterisation of ovine MPC and OB from a bone engineering perspective and suggests that MPC and OB provide promising means for future bone disease related treatment applications., (Copyright © 2010 John Wiley & Sons, Ltd.)

Currently, well-established clinical therapeutic approaches for bone reconstruction are restricted to the transplantation of autografts and allografts, and the implantation of metal devices or ceramic-based implants to assist bone regeneration. Bone grafts possess osteoconductive and osteoinductive properties; however, they are limited in access and availability and associated with donor-site morbidity, hemorrhage, risk of infection, insufficient transplant integration, graft devitalization, and subsequent resorption resulting in decreased mechanical stability. As a result, recent research focuses on the development of alternative therapeutic concepts. The field of tissue engineering has emerged as an important approach to bone regeneration. However, bench-to-bedside translations are still infrequent as the process toward approval by regulatory bodies is protracted and costly, requiring both comprehensive in vitro and in vivo studies. The subsequent gap between research and clinical translation, hence, commercialization, is referred to as the "Valley of Death" and describes a large number of projects and/or ventures that are ceased due to a lack of funding during the transition from product/technology development to regulatory approval and subsequently commercialization. One of the greatest difficulties in bridging the Valley of Death is to develop good manufacturing processes and scalable designs and to apply these in preclinical studies. In this article, we describe part of the rationale and road map of how our multidisciplinary research team has approached the first steps to translate orthopedic bone engineering from bench to bedside by establishing a preclinical ovine critical-sized tibial segmental bone defect model, and we discuss our preliminary data relating to this decisive step.

Aim: Mesenchymal stem cells have a high therapeutic potential for the reconstruction of articular cartilage defects. In this study, a cartilage-polymer construct using mesenchymal stem cells from trabecular bone and a polylactic acid polymer was fabricated with a press-coating technique. We investigated whether cells from human trabecular bone fragments have the same chondrogenic differentiation potential as mesenchymal stem cells derived from bone marrow and whether it is possible to reconstruct an osteochondral lesion in the nude rat with the fabricated construct., Method: Cells were obtained from the femoral head of patients undergoing total hip arthroplasty. The fabrication of the constructs was performed by centrifugation of 1.5x10(6) cells to a cell pellet which was then placed in a polymer block. The fabricated cell constructs were cultivated for 3 weeks in a serum-free medium, supplemented with transforming growth factor beta1. Every third day, the chondrogenic differentiation was analysed using chondrogenic and osteogenic marker genes. After three weeks the constructs were implanted into 5 mm osteochondral defects of the knee joint of nude rats. After 4 and 12 weeks histochemical and immunohistochemical analyses were performed., Results: At the end of the culture period the constructs showed a proteoglycan-rich extracellular matrix with the expression of collagen types II, IX and X as well as aggrecan und COMP (cartilage oligomeric matrix protein). No osteogenic markers except collagen type I could be detected. The analysis of the in vivo experiment showed a good defect filling with a reconstructed cartilage surface along with increasing resorption of the polymer., Conclusion: We have shown that it is possible to fabricate cartilage-polymer constructs from trabecular bone-derived cells, and that the cells have the same chondrogenic differentiation potential as mesenchymal stem cells derived from bone marrow. With the fabricated cartilage-polymer construct it is possible to reconstruct an osteochondral defect in the knee joint of the nude rat., (Copyright (c) Georg Thieme Verlag KG Stuttgart-New York.)

Articular cartilage is a highly hydrated tissue with depth-dependent cellular and matrix properties that provide low-friction load bearing in joints. However, the structure and function are frequently lost and there is insufficient repair response to regenerate high-quality cartilage. Several hydrogel-based tissue-engineering strategies have recently been developed to form constructs with biomimetic zonal variations to improve cartilage repair. Modular hydrogel systems allow for systematic control over hydrogel properties, and advanced fabrication techniques allow for control over construct organization. These technologies have great potential to address many unanswered questions involved in prescribing zonal properties to tissue-engineered constructs for cartilage repair.

Technology platforms originally developed for tissue engineering applications produce valuable models that mimic three-dimensional (3D) tissue organization and function to enhance the understanding of cell/tissue function under normal and pathological situations. These models show that when replicating physiological and pathological conditions as closely as possible investigators are allowed to probe the basic mechanisms of morphogenesis, differentiation and cancer. Significant efforts investigating angiogenetic processes and factors in tumorigenesis are currently undertaken to establish ways of targeting angiogenesis in tumours. Anti-angiogenic agents have been accepted for clinical application as attractive targeted therapeutics for the treatment of cancer. Combining the areas of tumour angiogenesis, combination therapies and drug delivery systems is therefore closely related to the understanding of the basic principles that are applied in tissue engineering models. Studies with 3D model systems have repeatedly identified complex interacting roles of matrix stiffness and composition, integrins, growth factor receptors and signalling in development and cancer. These insights suggest that plasticity, regulation and suppression of these processes can provide strategies and therapeutic targets for future cancer therapies. The historical perspective of the fields of tissue engineering and controlled release of therapeutics, including inhibitors of angiogenesis in tumours is becoming clearly evident as a major future advance in merging these fields. New delivery systems are expected to greatly enhance the ability to deliver drugs locally and in therapeutic concentrations to relevant sites in living organisms. Investigating the phenomena of angiogenesis and anti-angiogenesis in 3D in vivo models such as the Arterio-Venous (AV) loop mode in a separated and isolated chamber within a living organism adds another significant horizon to this perspective and opens new modalities for translational research in this field.