Search

Introduction: Large bone defects in long bone are not able to repair themselves and require grafts. Although autograft is the gold standard, it is associated with some disadvantages. Consequently, the application of tissue engineering (TE) techniques help with the use of allogenic biological and artificial scaffolds, cells and growth factors (GFs). Following 3Rs and in vitro testing strategies, animal models are required in preclinical in vivo studies to evaluate the therapeutic effects of the most promising TE techniques., Materials and Methods: A systematic review was performed from 2000 to 2019 to evaluate bone regeneration sheep metatarsus defects., Results: Eleven in vivo studies on sheep metatarsus defect were retrieved. The mid-diaphysis of metatarsus was the region most employed to perform critical size defects. Natural, synthetic and hybrid scaffolds were implanted, combined with bone marrow mesenchymal stem cells (BMSCs), GFs such as osteogenic protein 1 (OP1) and platelet rich plasma (PRP). The maximum follow-up period was 4 and 6 months in which radiography, histology, histomorphometry, computed tomography (CT) and biomechanics were performed to evaluate the healing status., Conclusions: the sheep metatarsus defect model seems to be a suitable environment with a good marriage of biological and biomechanical properties. Defects of 3 cm are treated with natural scaffolds (homologous graft or allografts), those of 2.5 cm with natural, synthetic or composite scaffolds, while little defects (0.5 × 0.5 cm) with composite scaffolds. No difference in results is found regardless of the defect size., (Copyright © 2020. Published by Elsevier Ltd.)

Osteochondral scaffolds are emerging as a promising alternative for articular cartilage regeneration, although with still controversial results. In particular, the restoration of the osteochondral interface remains an open challenge. The current available investigative procedures are not optimal to quantify the properties of this region, neither to evaluate the quality of the regenerated tissue with respect to the physiological one. This study investigates an advanced procedure able to quantitatively evaluate the mechanical gradient between stiff and compliant tissues, such as in the osteochondral region where the interface between hyaline and calcified cartilage (tidemark) plays an integral role in transferring articular loads from the compliant articular surface to the stiffer underlying bone. A series of nanoindentation line scans was performed along the tidemark - starting from hyaline and expanding across calcified cartilage - on histological sections derived from sheep osteochondral tissue regenerated by a three-layered biomimetic scaffold, as well as to the adjacent healthy tissue for comparative purposes. After an accurate assessment of the indentation parameters, a sigmoid curve-fit function was applied on the reduced modulus profiles to extract gap, width and regularity of the mechanical transition. The designed procedure succeeded in quantitatively assessing the transition between compliant and stiff regions, limiting experimental issues that generally affect the reliability of the indentation mechanical data, such as apex-blunt indenter tip effect, surface roughness, and influence of the substrate. Among the evaluated parameters, the mechanical gap highlighted the main difference between native and regenerated tissues. Thanks to the information retrievable through this procedure, this load transmission area can be further investigated, providing data to tailor osteochondral engineered tissues in the future., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Tendon injuries are a noteworthy morbidity but at present there are few effective scientifically proven treatments. In recent decades, a number of new strategies including tissue engineering with mesenchymal stem cells (MSCs) have been proposed to enhance tendon healing. Although MSCs are an interesting and promising approach, many questions regarding their use in tendon repair remain unanswered. This descriptive overview of the literature of the last decade explores the in vivo studies on tendon healing, in small and large animal models, which used MSCs harvested from different tissues, and the state of the art in clinical applications. It was observed that there are still doubts about the optimum amount of MSCs to use and their source and the type of scaffolds to deliver the cells. Thus, further studies are needed to determine the best protocol for MSC use in tendon healing. Copyright © 2016 John Wiley & Sons, Ltd., (Copyright © 2016 John Wiley & Sons, Ltd.)

Nanoindentation can provide new insights on the maturity stage of regenerating bone. The aim of the present study was the evaluation of the nanomechanical properties of newly-formed bone tissue at 4 weeks from the implantation of permanent magnets and magnetic scaffolds in the trabecular bone of rabbit femoral condyles. Three different groups have been investigated: MAG-A (NdFeB magnet + apatite/collagen scaffold with magnetic nanoparticles directly nucleated on the collagen fibers during scaffold synthesis); MAG-B (NdFeB magnet + apatite/collagen scaffold later infiltrated with magnetic nanoparticles) and MAG (NdFeB magnet). The mechanical properties of different-maturity bone tissues, i.e. newly-formed immature, newly-formed mature and native trabecular bone have been evaluated for the three groups. Contingent correlations between elastic modulus and hardness of immature, mature and native bone have been examined and discussed, as well as the efficacy of the adopted regeneration method in terms of "mechanical gap" between newly-formed and native bone tissue. The results showed that MAG-B group provided regenerated bone tissue with mechanical properties closer to that of native bone compared to MAG-A or MAG groups after 4 weeks from implantation. Further, whereas the mechanical properties of newly-formed immature and mature bone were found to be fairly good correlated, no correlation was detected between immature or mature bone and native bone. The reported results evidence the efficacy of nanoindentation tests for the investigation of the maturity of newly-formed bone not accessible through conventional analyses.

The discovery of new strategies to repair large segmental bone defects is currently an open challenge for worldwide clinicians. In the treatment of critical-sized bone defects, an alternative strategy to traditional bone grafting is always more frequently the use of tailor-made scaffolds modelled on the final size and shape of the implant site. Here, poly-ε-caprolactone-based composite scaffolds including poly-L-lactic acid continuous fibres and hyaluronan derivates (i.e. HYAFF11®) have been investigated for the peculiar 3D architecture characterized by interconnected macroporous networks and tunable mechanical properties. Composite scaffolds were immersed in simulated body fluid solution in order to support in vivo tissue in-growth. Scaffolds loaded with autologous cells (bone marrow stromal cells) plus platelet-rich plasma and osteoconductive protein such bone morphogenetic protein-7 were also tested to evaluate eventual enhancement in bone regeneration. The morphological and mechanical properties of poly-L-lactic acid-reinforced composite scaffolds have been studied to identify the optimal scaffold design to match the implant-site requirements of sheep metatarsal defects. Dynamic mechanical tests allowed to underline the viscoelastic response of the scaffold - resulting in elastic moduli from 2.5 to 1.3 MPa, suitable to temporarily support the structural function of damaged bone tissue. In vivo preliminary investigations in a sheep model of metatarsus shaft defect also showed the attitude of the scaffold to promote osteogenesis, preferentially in association with bone marrow stromal cell and platelet-rich plasma, even if the highest amount of mature bone was reached in the case of scaffold loaded with human bone morphogenetic protein-7 released via hydrolytic degradation of HYAFF11® phases in the implant site., (© The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.)

Several therapeutic approaches have been developed to address hyaline cartilage regeneration, but to date, there is no universal procedure to promote the restoration of mechanical and functional properties of native cartilage, which is one of the most important challenges in orthopedic surgery. For cartilage tissue engineering, adult mesenchymal stem cells (MSCs) are considered as an alternative cell source to chondrocytes. Since little is known about adipose-derived mesenchymal stem cell (ADSC) cartilage regeneration potential, the aim of this review was to give an overview of in vivo studies about the chondrogenic potential and regeneration ability of culture-expanded ADSCs when implanted in heterotopic sites or in osteoarthritic and osteochondral defects. The review compares the different studies in terms of number of implanted cells and animals, cell harvesting sites, in vitro expansion and chondrogenic induction conditions, length of experimental time, defect dimensions, used scaffolds and post-explant analyses of the cartilage regeneration. Despite variability of the in vivo protocols, it seems that good cartilage formation and regeneration were obtained with chondrogenically predifferentiated ADSCs (1 × 10(7) cells for heterotopic cartilage formation and 1 × 10(6) cells/scaffold for cartilage defect regeneration) and polymeric scaffolds, even if many other aspects need to be clarified in future studies., (© 2013 Wiley Periodicals, Inc.)

Natural bone is a complex inorganic-organic nanocomposite material, in which hydroxyapatite (HA) nanocrystals and collagen fibrils are well organized into hierarchical architecture over several length scales. In this work, we reported a new hybrid material (CMC-HA) containing HA drown in a carboxymethylcellulose (CMC)-based hydrogel. The strategy for inserting HA nanocrystals within the hydrogel matrix consists of making the freeze-dried hydrogel to swell in a solution containing HA microcrystals. The composite CMC-HA hydrogel has been characterized from a physicochemical and morphological point of view by means of FTIR spectroscopy, rheological measurements, and field emission scanning electron microscopy (FESEM). No release of HA was measured in water or NaCl solution. The distribution of HA crystal on the surface and inside the hydrogel was determined by time of flight secondary ion mass spectrometry (ToF-SIMS) and FESEM. The biological performance of CMC-HA hydrogel were tested by using osteoblast MG63 line and compared with a CMC-based hydrogel without HA. The evaluation of osteoblast markers and gene expression showed that the addition of HA to CMC hydrogel enhanced cell proliferation and metabolic activity and promoted the production of mineralized extracellular matrix., (Copyright © 2013 Wiley Periodicals, Inc.)

Bio-synthetic scaffolds of interspersed poly(l-lactic acid) (PLLA) and gelatin (GEL) fibers are fabricated by co-electrospinning. Tailored PLLA/GEL compositions are obtained and GEL crosslinking with genipin provides for the maintenance of good fiber morphology. Scaffold tensile mechanical properties are intermediate between those of pure PLLA and GEL and vary as a function of PLLA content. Primary human chondrocytes grown on the scaffolds exhibit good proliferation and increased values of the differentiation parameters, especially for intermediate PLLA/GEL compositions. Mineralization tests enable the deposition of a uniform layer of poorly crystalline apatite onto the scaffolds, suggesting potential applications involving cartilage as well as cartilage-bone interface tissue engineering., (Copyright © 2013 Elsevier B.V. All rights reserved.)

Hyaline cartilage lesions represent an important global health problem. Several approaches have been developed in the last decades to resolve this disability cause, including tissue engineering, but to date, there is not a definitive procedure that is able to promote a repair tissue with the same mechanical and functional characteristics of native cartilage, and to obtain its integration in the subchondral bone. The need of resolutive technologies to obtain a "more effective" tissue substitutes has led Butler to propose the "Functional Tissue Engineering" (FTE) paradigm, whose principles are outlined in a so-called FTE road map. It consists of a two-phase strategy: in vitro tissue engineering and clinically surgery evaluation. The first phase, based on construct development, should take into account not only the chondrocyte biology, as their sensitivity to biochemical and physical stimuli, the risk of dedifferentiation in culture, and the ability to produce extracellular matrix, but also the features of suitable scaffolds. The in vivo phase analyzes the inflammatory microenvironment where the construct will be placed, because the cytokines released by synoviocytes and chondrocytes could affect the construct integrity, and, in particular, cause matrix degradation. The use of pulsed electromagnetic fields (PEMFs) represents an innovative therapeutic approach, because it is demonstrated that this physical stimulus increases the anabolic activity of chondrocytes and cartilage explants with consequent increase of matrix synthesis, but, at the same time, PEMFs limit the catabolic effects of inflammatory cytokines, reducing the construct degradation inside the surgical microenvironment. PEMFs mediate an up-regulation of A2A adenosine receptors and a potentiation of their anti-inflammatory effects.

Background: Although progress has been made in the treatment of articular cartilage lesions, they are still a major challenge because current techniques do not provide satisfactory long-term outcomes. Tissue engineering and the use of functional biomaterials might be an alternative regenerative strategy and fulfill clinical needs. Decellularized extracellular matrices have generated interest as functional biologic scaffolds, but there are few studies on cartilage regeneration. The aim of this study was to evaluate in vitro the biological influence of a newly developed decellularized human dermal extracellular matrix on two human primary cultures., Methods: Normal human articular chondrocytes (NHAC-kn) and human mesenchymal stromal cells (hMSC) from healthy donors were seeded in polystyrene wells as controls (CTR), and on decellularized human dermis batches (HDM&#95;derm) for 7 and 14 days. Cellular proliferation and differentiation, and anabolic and catabolic synthetic activity were quantified at each experimental time. Histology and scanning electron microscopy were used to evaluate morphology and ultrastructure., Results: Both cell cultures had a similar proliferation rate that increased significantly (p < 0.0005) at 14 days. In comparison with CTR, at 14 days NHAC-kn enhanced procollagen type II (CPII, p < 0.05) and aggrecan synthesis (p < 0.0005), whereas hMSC significantly enhanced aggrecan synthesis (p < 0.0005) and transforming growth factor-beta1 release (TGF-β1, p < 0.0005) at both experimental times. Neither inflammatory stimulus nor catabolic activity induction was observed. By comparing data of the two primary cells, NHAC-kn synthesized significantly more CPII than did hMSC at both experimental times (p < 0.005), whereas hMSC synthesized more aggrecan at 7 days (p < 0.005) and TGF-β1 at both experimental times than did NHAC-kn (p < 0.005)., Conclusions: The results obtained showed that in in vitro conditions HDM&#95;derm behaves as a suitable scaffold for the growth of both well-differentiated chondrocytes and undifferentiated mesenchymal cells, thus ensuring a biocompatible and bioactive substrate. Further studies are mandatory to test the use of HDM&#95;derm with tissue engineering to assess its therapeutic and functional effectiveness in cartilage regeneration.

The aim of the study was to investigate the use of a hyaluronic acid/polycaprolactone material for meniscal tissue engineering and to evaluate the tissue regeneration after the augmentation of the implant with expanded autologous chondrocytes. Eighteen skeletally mature sheep were treated. The animals were divided into three groups: cell-free scaffold, scaffold seeded with autologous chondrocytes, and meniscectomy alone. The implant was sutured to the capsule and to the meniscal ligament. At a 12-month gross assessment, histology and histomorphometry were used to assess the meniscus implant, knee joint, and osteoarthritis development. All implants showed excellent capsular ingrowth at the periphery. The implant gross assessment showed significant differences between cell-seeded and cell-free groups (p=0.011). The histological analysis indicated a cellular colonization throughout the implanted constructs. Avascular cartilaginous tissue formation was significantly more frequent in the cell-seeded constructs. Joint gross assessment showed that sheep treated with scaffold implantation achieved a significant higher score than those underwent meniscectomy (p<0.0005), and the Osteoarthritis Research Society International score showed that osteoarthritic changes were significantly less in the cell-seeded group than in the meniscectomy group (p=0.047), even though results were not significantly superior to those of the cell-free scaffold. Seeding of the scaffold with autologous chondrocytes increases its tissue regeneration capacity, providing a better fibrocartilaginous tissue formation. The study suggests the potential of the novel hyaluronic acid/polycaprolactone scaffold for total meniscal substitution, although this approach has to be further improved before being applied into clinical practice.

Purpose: Tissue repair in musculoskeletal injuries is often a slow and sometimes incomplete process. Regenerative medicine based on the use of growth factors (GFs) and cell therapy is aimed at improving the quality and speed of tendon and ligament healing. The aim of this study was to evaluate the potential for the administration of a combination of autologous platelet-rich plasma (PRP) and freshly isolated bone marrow mononucleated cells (BMMNCs) in 13 competition horses affected by overuse musculoskeletal injuries (suspensory ligament desmopathy and superficial flexor tendinopathy) and refractory to other therapies., Methods: After ultrasonographic localisation of the lesion, the autologous BMMNC suspension and PRP were injected directly into the core lesion. BMMNC and platelet count as well as growth factors in PRP were measured to determine factors influencing the clinical outcome., Results: Horses showed a marked improvement in their degree of lameness and 84.6% were able to return to competition. Among all the factors studied, the platelet concentration predicted the healing time: significantly faster recovery (p = 0.049) was observed in cases of PRP with more than 750 × 10(3)/μl platelets., Conclusions: Competition horses are involved in highly demanding activities, thus being a similar model for the high mechanical overload typical of human athletes. The promising results obtained suggest that this combined biological approach may be useful even for the treatment of recalcitrant overuse musculoskeletal injuries in highly demanding patients if the appropriate dose of cells and GFs is applied.

Objective: The aim of the study was to investigate the use of a novel hyaluronic acid/polycaprolactone material for meniscal tissue engineering and to evaluate the tissue regeneration after the augmentation of the implant with expanded autologous chondrocytes. Two different surgical implantation techniques in a sheep model were evaluated., Methods: Twenty-four skeletally mature sheep were treated with total medial meniscus replacements, while two meniscectomies served as empty controls. The animals were divided into two groups: cell-free scaffold and scaffold seeded with autologous chondrocytes. Two different surgical techniques were compared: in 12 animals, the implant was sutured to the capsule and to the meniscal ligament; in the other 12 animals, also a transtibial fixation of the horns was used. The animals were euthanized after 4 months. The specimens were assessed by gross inspection and histology., Results: All implants showed excellent capsular ingrowth at the periphery. Macroscopically, no difference was observed between cell-seeded and cell-free groups. Better implant appearance and integrity was observed in the group without transosseous horns fixation. Using the latter implantation technique, lower joint degeneration was observed in the cell-seeded group with respect to cell-free implants. The histological analysis indicated cellular infiltration and vascularization throughout the implanted constructs. Cartilaginous tissue formation was significantly more frequent in the cell-seeded constructs., Conclusion: The current study supports the potential of a novel HYAFF/polycaprolactone scaffold for total meniscal substitution. Seeding of the scaffolds with autologous chondrocytes provides some benefit in the extent of fibrocartilaginous tissue repair.

Tissue engineering may play a major role in the treatment of rotator cuff tendon lesions through replacement of an injured tendon segment. Tendons have very poor spontaneous regenerative capabilities, and despite intensive remodelling, complete regeneration is never achieved and the strength of tendon and ligaments remains as much as 30% lower than normal even months or years following an acute injury. Tendons seem to be the least complex of the connective tissues with respect to their composition and architecture and this leads to the expectation that they would be more amenable to tissue engineered approaches than other tissues. An accurate literature revision was done in order to know the state of the art of tissue engineering therapies in the field of rotator cuff regeneration. The following techniques of tissue engineering were considered: local injection of stem cells or growth factors, gene transfer, in situ tissue engineering and in vitro production of bioengineered tendons to be further transplanted in the lesion site. So far, few experimental or clinical studies have been done on tendon tissue engineering compared to the extensive work on other tissues of orthopaedic interest, such as bone and cartilage. The existing studies are related to the following tissue engineering methodologies: gene transfer, in situ tissue engineering and in vitro production of bioengineered tendons. In our opinion the previously described literature revision showed the necessity for future studies in this area also because of recent advances in biological and bioactive scaffolds.

Colloidal lithography and embossing master are new techniques of producing nanotopography, which have been recently applied to improve tissue response to biomaterials by modifying the surface topography on a nano-scale dimension. A natural polyester (Biopol), 8% 3-hydroxyvalerate-component (D400G) and a conventional biodegradable polycaprolactone (PCL) were studied, both nanostructured and native forms, in vitro and in vivo. Nanopits (100-nm deep, 120-nm diameter) on the D400G surface were produced by the embossing master technique (Nano-D400G), while nanocylinders (160-nm height, 100-nm diameter) on the PCL surface were made by the colloidal lithography technique (Nano-PCL). L929 fibroblasts were seeded on polyesters, and cell proliferation, cytotoxic effect, synthetic and cytokine production were assessed after 72 h and 7 days. Then, under general anesthesia, 3 Sprague-Dawley rats received dorsal subcutaneous implants of nanostructured and native polyesters. At 1, 4 and 12 weeks the animals were pharmacologically euthanized and implants with surrounding tissue studied histologically and histomorphometrically. In vitro results showed significant differences between D400G and PCL in Interleukin-6 production at 72 h. At 7 days, significant (P < 0.05) differences were found in Interleukin-1beta and tumor necrosis factor-alpha release for Nano-PCL when compared to Nano-D400G, and for PCL in comparison with D400G. In vivo results indicated that Nano-D400G implants produced a greater extent of inflammatory tissue than Nano-PCL at 4 weeks. The highest vascular densities were observed for Nano-PCL at 4 and 12 weeks. Chemical and topographical factors seem to be responsible for the different behaviour, and from the obtained results a prevalence of chemistry on in vitro data and nanotopography on soft tissue response in vivo are hypothesized, although more detailed investigations are necessary in this field.

One of the methods employed to improve healing of damaged tissues is the use of cellular based therapies. A number of regenerative medicine based strategies, from in vitro expanded mesenchymal stem cells (MSCs) to "one-step" procedures using bone marrow (BM) in toto (BM aspirate; BMA) or BM concentrate (BMC), have been developed. Recently, orthopedic researchers focused their attention on the clinical therapeutic potential of BMC and BMA for musculoskeletal regeneration. BMA is reported as an excellent source of cells and growth factors. However, the quality ofBM harvest and aspirate is extremely technique-dependent and, due to the presence of megakaryocytes and platelets, BMA is prone to clot. BMA clot formation is usually considered a complication hampering the procedures on both BMC preparation and MSC expansion. Therefore, different protocols have been developed to avoid and/or degrade clots. However, from a biological point of view there is a strong rationale for the use of BMA clot for tissue engineering strategies. This descriptive systematic literature review summarizes preclinical and clinical studies dealing the use ofBMAclot for orthopedic procedures and provided some evidence supporting its use as a cell based therapy for cartilage and bone regeneration. Despite these results, there are still few preclinical and clinical studies that carefully evaluate the safety and efficacy of BMAclot in orthopedic procedures. Thus, implementing biological knowledge and both preclinical and clinical studies could help researchers and clinicians to understand if BMA clots can really be considered a possible therapeutic tool. [ABSTRACT FROM AUTHOR]

Chronic Kidney Disease-Mineral and Bone Disorder (CKD-MBD) is characterized by an increased fracture risk. Bone marrow mesenchymal stromal cells (BMSCs) may be involved in the pathogenesis of bone disease and, in view of their promising potential applications in bone tissue engineering, the effect of uremia on BMSCs regenerative potential represents a central issue. The present study evaluated in vitro the effect of a serum pool from hemodialysis patients on BMSCs to observe its influence on osteogenic differentiation. Besides alterations in spatial organization and cytotoxicity along with hyperproliferation, gene expression analysis suggested an impairment in the osteogenic differentiation. More importantly, Receptor activator of nuclear factor kappa-B ligand (RANKL) was upregulated with a mild reduction in osteoprotegerin levels. In summary, uremic environment seems to impair BMSCs osteogenic differentiation. Moreover BMSCs themselves may enhance osteoclastogenesis, feasibly contributing to the altered bone remodeling in CKD-MBD patients. J. Cell. Physiol. 232: 2201-2209, 2017. © 2016 Wiley Periodicals, Inc. [ABSTRACT FROM AUTHOR]

Purpose: Bone tissue engineering is helpful in finding alternatives to overcome surgery limitations. Bone growth and repair are under the control of biochemical and mechanical signals; therefore, in recent years several approaches to improve bone regeneration have been evaluated. Osteo-inductive biomaterials, stem cells, specific growth factors and biophysical stimuli are among those. The aim of the present study was to evaluate if lowintensity pulsed ultrasound stimulation (LIPUS) treatment would improve the colonization of an MgHA/Coll hybrid composite scaffold by human mesenchymal stem cells (hMSCs) and their osteogenic differentiation. LIPUS stimulation was applied to hMSCs cultured on MgHA/Coll hybrid composite scaffold in osteogenic medium, mimicking the microenvironment of a bone fracture. Methods: hMSCs were seeded on MgHA/Coll hybrid composite scaffold in an osteo-inductive medium and exposed to LIPUS treatment for 20 min/day for different experimental times (7 days, 14 days). The investigation was focused on (i) the improvement of hMSCs to colonize the MgHA/Coll hybrid composite scaffold by LIPUS, in terms of cell viability and ultrastructural analysis; (ii) the activation of MAPK/ERK, osteogenic (ALPL, COL1A1, BGLAP, SPP1) and angiogenetic (VEGF, IL8) pathways, through gene expression and protein release analysis, after LIPUS stimuli. Results: LIPUS exposure improved MgHA/Coll hybrid composite scaffold colonization and induced in vitro osteogenic differentiation of hMSCs seeded on the scaffold. Conclusions: This work shows that the combined use of new biomimetic osteo-inductive composite and LIPUS treatment could be a useful therapeutic approach in order to accelerate bone regeneration pathways. [ABSTRACT FROM AUTHOR]

Bone tissue engineering approaches are encouraging for the improvement of conventional bone grafting technique drawbacks. Thanks to their self-renewal and multi-lineage differentiation ability, stem cells are one of the major actors in tissue engineering approaches, and among these adult mesenchymal stem cells (MSCs) hold a great promise for regenerative medicine strategies. Bone marrow MSCs (BM-MSCs) are the first- identified and well-recognized stem cell population used in bone tissue engineering. Nevertheless, several factors hamper BM-MSC clinical application and subsequently, new stem cell sources have been investigated for these purposes. The fruitful selection and combination of tissue engineered scaffold, progenitor cells, and physiologic signaling molecules allowed the surgeon to reconstruct the missing natural tissue. On the basis of these considerations, we analyzed the capability of two different scaffolds, planned for osteochondral tissue regeneration, to modulate differentiation of adult stem cells of dissimilar local sources (i.e., periodontal ligament, maxillary periosteum) as well as adipose-derived stem cells (ASCs), in view of possible craniofacial tissue engineering strategies. We demonstrated that cells are differently committed toward the osteoblastic phenotype and therefore, taking into account their specific features, they could be intriguing cell sources in different stem cell-based bone/periodontal tissue regeneration approaches. [ABSTRACT FROM AUTHOR]

The history of wound treatment has been virtually the history of surgery for many centuries and also is a history of alliance and conflicts between the physician and nature. The Hippocratic statement about natura medicatrix has been well known since antiquity, but often was neglected. Suppuration was considered a necessary event in the healing process and was elicited by the surgeons with traumatic and painful procedures. The concept of simplicity in treating the wounds was suggested by Teodorico Borgognone and Henry de Mondeville in 13th century and was confirmed only three centuries later by the works of Ambroise Paré and Cesare Magati. The history of wound management has been characterized by empiricism since the 18th century, but it took a physiopathological direction during the 19th century when Virchow investigated tissue reaction to injuries, and Lister introduced antiseptic procedures in surgery. By establishing the basis for a biological method to treat wounds, the seeds were sown to enhance the pathways involved in tissue repair, also with the support of new strategies and technology. [ABSTRACT FROM AUTHOR]

Tissue engineering may play a major role in the treatment of rotator cuff tendon lesions through replacement of an injured tendon segment. Tendons have very poor spontaneous regenerative capabilities, and despite intensive remodelling, complete regeneration is never achieved and the strength of tendon and ligaments remains as much as 30% lower than normal even months or years following an acute injury. Tendons seem to be the least complex of the connective tissues with respect to their composition and architecture and this leads to the expectation that they would be more amenable to tissue engineered approaches than other tissues. An accurate literature revision was done in order to know the state of the art of tissue engineering therapies in the field of rotator cuff regeneration. The following techniques of tissue engineering were considered: local injection of stem cells or growth factors, gene transfer, in situ tissue engineering and in vitro production of bioengineered tendons to be further transplanted in the lesion site. So far, few experimental or clinical studies have been done on tendon tissue engineering compared to the extensive work on other tissues of orthopaedic interest, such as bone and cartilage. The existing studies are related to the following tissue engineering methodologies: gene transfer, in situ tissue engineering and in vitro production of bioengineered tendons. In our opinion the previously described literature revision showed the necessity for future studies in this area also because of recent advances in biological and bioactive scaffolds. [ABSTRACT FROM AUTHOR]

Tenocytes were isolated from the rotator cuff tendons of healthy (HT) and glucocorticoid (GC)-treated rats (GCT) and were cultured on polystyrene wells (TCP) as control, and on 2 de-cellularized collagen matrices: porcine small intestinal submucosa (SIS), and human dermal matrix (Graftjacket®, GJ). At 3 and 7 days cell proliferation and synthesis were evaluated. Proliferation of HT tenocytes increased between experimental times for both tested membranes, but already at 3 days, HT tenocytes cultured on GJ showed the highest WST-1 value. The collagen-I (CICP) synthesis on GJ membrane did not change between experimental times and was significantly higher than TCP and SIS at 7 days. Proteoglycans (PG), and fibronectin (FBN) synthesis increased when HT were cultured on GJ, between experimental times, and both PG and FBN synthesis on GJ membrane were higher than TCP and SIS at 7 days. GC determined decreases in cell proliferation, CICP and PG syntheses at 3 days of culture on TCP when compared to HT tenocytes while a decrease in WST-1 was maintained at 7 days. CICP, PG and FBN (only at 3 days) syntheses were significantly higher in GCT tenocytes cultured on GJ. The negative effects on GC on GCT tenocytes cultured on membrane were particularly evident on SIS for CICP (−18%) and FBN (−67%) synthesis. The obtained results support the conclusion that GJ is more suitable than SIS as a scaffold for in situ tissue engineering and for the in vitro bioengineering of tendons to heal massive tears of the rotator cuff tendon. © 2006 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 25:98-107, 2007 [ABSTRACT FROM AUTHOR]

Multifunctional and resistant 3D structures represent a great promise and a great challenge in bone tissue engineering. This study addresses this problem by employing polycaprolactone (PCL)-based scaffolds added with hydroxyapatite (HAp) and superparamagnetic iron oxide nanoparticles (SPION), able to drive on demand the necessary cells and other bioagents for a high healing efficiency. PCL-HAp-SPION scaffolds with different concentrations of the superparamagnetic component were developed through the 3D-printing technology and the specific topographical features were detected by Atomic Force and Magnetic Force Microscopy (AFM-MFM). AFM-MFM measurements confirmed a homogenous distribution of HAp and SPION throughout the surface. The magnetically assisted seeding of cells in the scaffold resulted most efficient for the 1% SPION concentration, providing good cell entrapment and adhesion rates. Mesenchymal Stromal Cells (MSCs) seeded onto PCL-HAp-1% SPION showed a good cell proliferation and intrinsic osteogenic potential, indicating no toxic effects of the employed scaffold materials. The performed characterizations and the collected set of data point on the inherent osteogenic potential of the newly developed PCL-HAp-1% SPION scaffolds, endorsing them towards next steps of in vitro and in vivo studies and validations. [ABSTRACT FROM AUTHOR]

Simple Summary: Polycaprolactone (PCL) is a bioresorbable and biocompatible polymer that has been widely used in long-term implants. However, when it comes to regenerative medicine, PCL suffers from some shortcomings such as a slow degradation rate, poor mechanical properties, and low cell adhesion. The incorporation of ceramics such as bioactive glasses into the PCL matrix has yielded a class of hybrid biomaterials with remarkably improved mechanical properties, controllable degradation rates, and enhanced bioactivity, which are suitable for bone tissue engineering. The use of conventional approaches (such as solvent casting and particulate leaching, phase separation, electrospinning, freeze drying, etc.) in realizing these composite scaffolds strongly affects the control of both the internal and the external architecture of scaffolds, including pore size, pore morphology, and overall structure porosity. Accordingly, 3D printing was used in this study because of the benefits offered over conventional methods, such as high flexibility in shape and size, high reproducibility, capabilities of precise control over internal architecture down to the microscale level, and a customized design that can be tailored to specific patient needs. The optimization of the scaffold structure was previously investigated in terms of architecture through the combination of the Taguchi method and CAD drawing, and, in this study, it was investigated by varying the composition of the composite material. Polycaprolactone (PCL) is widely used in additive manufacturing for the construction of scaffolds for tissue engineering because of its good bioresorbability, biocompatibility, and processability. Nevertheless, its use is limited by its inadequate mechanical support, slow degradation rate and the lack of bioactivity and ability to induce cell adhesion and, thus, bone tissue regeneration. In this study, we fabricated 3D PCL scaffolds reinforced with a novel Mg-doped bioactive glass (Mg-BG) characterized by good mechanical properties and biological reactivity. An optimization of the printing parameters and scaffold fabrication was performed; furthermore, an extensive microtopography characterization by scanning electron microscopy and atomic force microscopy was carried out. Nano-indentation tests accounted for the mechanical properties of the scaffolds, whereas SBF tests and cytotoxicity tests using human bone-marrow-derived mesenchymal stem cells (BM-MSCs) were performed to evaluate the bioactivity and in vitro viability. Our results showed that a 50/50 wt% of the polymer-to-glass ratio provides scaffolds with a dense and homogeneous distribution of Mg-BG particles at the surface and roughness twice that of pure PCL scaffolds. Compared to pure PCL (hardness H = 35 ± 2 MPa and Young's elastic modulus E = 0.80 ± 0.05 GPa), the 50/50 wt% formulation showed H = 52 ± 11 MPa and E = 2.0 ± 0.2 GPa, hence, it was close to those of trabecular bone. The high level of biocompatibility, bioactivity, and cell adhesion encourages the use of the composite PCL/Mg-BG scaffolds in promoting cell viability and supporting mechanical loading in the host trabecular bone. [ABSTRACT FROM AUTHOR]

Study Design. Laboratory study. Objective. Mesenchymal stem cells (MSCs) derived from whole bone marrow aspirate (BMA) and MSCs derived from densitygradient centrifugation were isolated from vertebral bodies and cultured under either hypoxic or normoxic conditions to evaluate their biological characteristics and HOX and TALE signature able to improve spinal surgery procedures. Summary of Background Data. The use of spinal fusion procedures has increased over the last decades; however, failed fusion still remains an important problem. Clinician and researchers focused their attention on the therapeutic potential of bone marrow MSCs and several methods for their isolation and cultivation have been developed. However, the best source and techniques are still debated. Methods. MSCs morphology, surface markers, colony-formingunits, and three lineage differentiation through quantitative realtime PCR (qPCR) were evaluated. Additionally, gene expression analysis of HOX and TALE signatures during osteogenic differentiation were analyzed. Results. Our study showed that MSCs derived from whole BMA were successfully isolated and when cultured under hypoxic condition presented greater proliferation, larger colonies, and differentiated onto osteogenic and chondrogenic lineage with greater ability, while adipogenic differentiation was less efficient. Results also revealed that MSCs, differently isolated and cultured, expressed different level of HOX and TALE signatures and that HOXB8 were up-regulated with greater efficiency in MSCs derived from whole BMA under hypoxia. Conclusion. Our data indicated that hypoxic preconditioning of MSCs derived from whole BMA exhibited more suitable biological characteristics and different level of HOX and TALE gene activation. We, therefore, concluded that vertebral body MSCs derived from whole BMA may provide alternative sources of MSCs for tissue engineering applications for spine surgery. [ABSTRACT FROM AUTHOR]

Abstract: A novel hierarchical textile structure made of silk fibroin from Bombyx mori capable of matching the mechanical performance requirements of anterior cruciate ligament (ACL) and in vitro cell ingrowth is described. This sericin-free, Silk Fibroin Knitted Sheath with Braided Core (SF-KSBC) structure was fabricated using available textile technologies. Micro-CT analysis confirmed that the core was highly porous and had a higher degree of interconnectivity than that observed for the sheath. The in vivo cell colonization of the scaffolds is thus expected to penetrate even the internal parts of the structure. Tensile mechanical tests demonstrated a maximum load of 1212.4±56.4N (under hydrated conditions), confirming the scaffold's suitability for ACL reconstruction. The absence of cytotoxic substances in the extracts of the SF-KSBC structure in culture medium was verified by in vitro tests with L929 fibroblasts. In terms of extracellular matrix production, Human Periodontal Ligament Fibroblasts (HPdLFs) cultured in direct contact with SF-KSBC, compared to control samples, demonstrated an increased secretion of aggrecan (PG) and fibronectin (FBN) at 3 and 7days of culture, and no change in IL-6 and TNF-α secretion. Altogether, the outcomes of this investigation confirm the significant utility of this novel scaffold for ACL tissue regeneration. [Copyright &y& Elsevier]