Search

The cultivation of cells in 3D systems is commonly regarded to be more physiological than in 2D as it comes much closer to the natural situation in tissues in many different aspects. However, 3D cell culture is much more complex. Cells within the pores of a printed 3D scaffold face a special situation concerning cell-material interaction and cell adhesion, cell proliferation, and supply of medium and oxygen into the core of the scaffolds. Biological assays (for cell proliferation, viability, and activity) have been validated primarily for 2D cell cultures and need to be adapted for 3D cultures. Likewise, in imaging, a number of points need to be taken into account in order to get a clear picture of the cells in 3D scaffolds, preferably with the method of multiphoton microscopy. Here, we describe a method for pretreatment and cell seeding of porous inorganic composite scaffolds (α-TCP/HA) for bone tissue engineering and for cultivation of the cell-scaffold constructs. The analytical methods described are the cell proliferation assay and the ALP activity assay. A step-by-step protocol is provided here that safely tackles typical difficulties that arise with this 3D cell-scaffold setting. In addition, MPM imaging of cells is described both with and without labeling. The combination of biochemical assays and imaging provides valuable insights into the possibilities of analysis with this 3D cell-scaffold system., (© 2023. The Author(s), under exclusive license to Springer Science+Business Media, LLC, part of Springer Nature.)

Objective: Decellularizing solid organs is a promising top-down process to produce acellular bio-scaffolds for 'de novo' regrowth or application as tissue 'patches' that compensate, e.g., large volumetric muscle loss in reconstructive surgery. Therefore, generating standardized acellular muscle scaffolds marks a pressing area of need. Although animal muscle decellularization protocols were established, those are mostly manually performed and lack defined bioreactor environments and metrologies to assess decellularization quality in real-time. To close this gap, we engineered an automated bioreactor system to provide chemical decellularization solutions to immersed whole rat gastrocnemius medialis muscle through perfusion of the main feeding arteries., Results: Perfusion control is adjustable according to decellularization quality feedback. This was assessed both from (i) ex situ assessment of sarcomeres/nuclei through multiphoton fluorescence and label-free Second Harmonic Generation microscopy and DNA quantification, along with (ii) in situ within the bioreactor environment assessment of the sample's passive mechanical elasticity., Conclusion: We find DNA and sarcomere-free constructs after 72 h of 0.1% SDS perfusion-decellularization. Furthermore, passive elasticity can be implemented as additional online decellularization quality measure, noting a threefold elasticity decrease in acellular constructs., Significance: Our MyoBio represents a novel and useful automated bioreactor environment for standardized and controlled generation of acellular whole muscle scaffolds as a valuable source for regenerative medicine.

The goal of bone tissue engineering is to build artificial bone tissue with properties that closely resemble human bone and thereby support the optimal integration of the constructs (biografts) into the body. The development of tissues in 3D scaffolds includes several complex steps that need to be optimized and monitored. In particular, cell–material interaction during seeding, cell proliferation and cell differentiation within the scaffold pores play a key role. In this work, we seeded two types of 3D-printed scaffolds with pre-osteoblastic MC3T3-E1 cells, proliferated and differentiated the cells, before testing and adapting different assays and imaging methods to monitor these processes. Alpha-TCP/HA (α-TCP with low calcium hydroxyapatite) and baghdadite (Ca3ZrSi2O9) scaffolds were used, which had comparable porosity (~50%) and pore sizes (~300–400 µm). Cell adhesion to both scaffolds showed ~95% seeding efficiency. Cell proliferation tests provided characteristic progression curves over time and increased values for α-TCP/HA. Transmitted light imaging displayed a homogeneous population of scaffold pores and allowed us to track their opening state for the supply of the inner scaffold regions by diffusion. Fluorescence labeling enabled us to image the arrangement and morphology of the cells within the pores. During three weeks of osteogenesis, ALP activity increased sharply in both scaffolds, but was again markedly increased in α-TCP/HA scaffolds. Multiphoton SHG and autofluorescence imaging were used to investigate the distribution, morphology, and arrangement of cells; collagen-I fiber networks; and hydroxyapatite crystals. The collagen-I networks became denser and more structured during osteogenic differentiation and appeared comparable in both scaffolds. However, imaging of the HA crystals showed a different morphology between the two scaffolds and appeared to arrange in the α-TCP/HA scaffolds along collagen-I fibers. ALP activity and SHG imaging indicated a pronounced osteo-inductive effect of baghdadite. This study describes a series of methods, in particular multiphoton imaging and complementary biochemical assays, to validly measure and track the development of bone tissue in 3D scaffolds. The results contribute to the understanding of cell colonization, growth, and differentiation, emphasizing the importance of optimal media supply of the inner scaffold regions. [ABSTRACT FROM AUTHOR]

Synthetic cell carriers (A) represent common scaffold structures for the development of cell-based in vitro models of the human intestine but due to their low porosity or unwanted molecular adhesion effects, synthetic carriers can negatively affect cell function. Alternative scaffolds such as natural extracellular matrices (ECMs) (B) were shown to overcome some of the common drawbacks. However, their fabrication is time-consuming, less well standardized and not entirely conform to the 3R principle (replacement, reduction, refinement). Nowadays, biopolymers such as bacterial nanocellulose (BNC) (C) represent interesting scaffold materials for innovative tissue engineering concepts, as they can be generated in a faster and more standardized process workflow without the need for animal material. In this study, we demonstrate the BNC as suitable carrier for the development of Caco-2-based in vitro models of the human intestine. The BNC-based models exhibit organ-specific properties comprising typical cellular morphologies, characteristic protein expression profiles, representative ultrastructural features and the formation of a tight epithelial barrier. The proof of in vivo -like transport activities further validates the high quality of the BNC-based Caco-2 models. In summary, this illustrates the BNC as alternative bioscaffold of non-animal origin to develop functional organ models in vitro. Unlabelled Image • Comparison of synthetic, tissue-derived and biotechnologically produced scaffolds for tissue engineering applications • Reproducible and morphologically relevant results were obtained for bacterial nanocellulose (BNC)-based scaffolds • BNC as biocompatible as well as biomimetically relevant hydrogel-material shows a high production- and cost- efficiency [ABSTRACT FROM AUTHOR]