Search

Background: Measures of the sonorheometry based Quantra® viscoelastic hemostatic analyzer (HemoSonics, LCC, Charlottesville, VA, USA) were compared with corresponding results of the ROTEM® sigma device (Instrumentation Laboratory, Bedford, MA, USA)., Methods: In thirty-eight patients scheduled for elective cardiac surgery between December 2018 and October 2019, blood samples were taken after induction of anesthesia (sample 1) and after heparin neutralization (sample 2) and measured on Quantra (QPlus® Cartridge) and ROTEM sigma (ROTEM® sigma complete + hep Cartridge). Clot times and clot stiffness values were recorded. Clot stiffness values of ROTEM amplitudes (A in mm) were converted to shear modulus (G) in hectoPascal (hPa): G (hPa) = (5 x A)/(100-A). Additionally, time-to-results was recorded. Spearman rank test correlation and Bland Altman analysis were performed., Results: Clot stiffness parameters of the Quantra correlated strongly with corresponding measurements of the ROTEM with r = 0.93 and 0.94 for EXTEM A10 vs CS and r = 0.94 and 0.96 for FIBTEM A10 vs FCS for sample 1 and 2, respectively. Quantra clot time correlated strongly with ROTEM INTEM CT with r = 0.71 for sample 1 and r = 0.75 for sample 2. However, Bland Altman analysis showed no agreement in all compared assays of both methods. The median time to delivery of first and complete results was significantly shorter for Quantra (412 and 658 s) compared to ROTEM sigma (839 and 1290 s)., Conclusions: The Quantra showed a strong correlation with the ROTEM sigma for determining clot times and clot stiffness and the parameters assess similar aspects of clot development. However, these parameters are not directly interchangeable and implicate that separate cut-off values need to be established for users of the Quantra device. Word count: 278., Trial Registration: The study was retrospectively registered with ClinicalTrials.gov (ID: NCT04210830 ) at December 20th 2019., (© 2021. The Author(s).)

Background: When trauma patients arrive in the emergency department (ED), coagulopathy frequently is present. The time course, however, in which this coagulopathy develops is poorly understood. No study has fully evaluated the coagulation status, including thromboelastometry on-scene and at hospital arrival. We hypothesized that measured coagulation variables might change when measured at the scene of injury and upon arrival to the ED., Methods: We performed a prospective, single-center, observational study investigating coagulation status in 50 trauma patients on-scene and at arrival in the ED. Measurements included arterial blood gases, ROTEM®, protein S100, protein C activity, protein S, Quick value, international normalized ratio, activated partial thromboplastin time, D-dimer, coagulation factor V (FV), coagulation factor XIII (FXIII), fibrinogen, hemoglobin, hematocrit, platelets, and volume and blood products being administered during the first 24 hours., Results: Significant changes between on-scene and the ED were observed for the following values: partial venous oxygen pressure increased and sodium, glucose, and lactate decreased. For EXTEM, INTEM, and APTEM, clotting time and clot formation time increased significantly, whereas maximal clot firmness and angle α decreased significantly (all P ≤ 0.004). For FIBTEM, clotting time increased significantly and maximal clot firmness decreased significantly. In the laboratory, significant reductions in hemoglobin, hematocrit, platelets, activated partial thromboplastin time, fibrinogen, FV, FXIII, protein C activity, protein S, and protein S100 were observed (all P ≤ 0.001)., Conclusions: Although most all laboratory and rotational thromboelastometry coagulation tests worsened over time when measured on-scene and in the ED, monitoring coagulation at the scene of trauma does not provide clinically important information in a majority of trauma patients. One hour after injury, significant activation and consumption of fibrinogen, FV, FXIII, protein C activity, and protein S were observed.

Background: The aim of this study was to determine the association between standard laboratory tests, coagulation factor concentrations, and Rotation Thromboelastometry (ROTEM® delta, TEM® International GmbH, Munich, Germany) in patients undergoing major surgery with hemorrhage., Methods: In 45 patient's fibrinogen, factor VIII, factor XIII, International Normalized Ratio (INR), activated partial thromboplastin time (aPTT), thrombin time, hemoglobin, leukocytes, and platelet count were simultaneously measured intraoperatively with ROTEM (EXTEM, INTEM, FIBTEM, APTEM) measurements. ROTEM parameters were: clotting time (CT), clot formation time (CFT), maximum clot firmness (MCF), and α-angle. Demographic and laboratory data were expressed as mean ± SD and median [range]; nonparametric Spearman rank correlations and multiple linear regressions were performed; P-values ≤0.003 were considered significant., Results: Significant correlations (P ≤ 0.003) were found for CFT, α-angle, and MCF, in EXTEM, INTEM, and APTEM with platelets, INR, and fibrinogen. Factor VIII (18 measurements) showed a strong correlation (r ≥ 0.7 or r ≤ -0.7; all P ≤ 0.003) with MCF, CFT, and α-angle of EXTEM, INTEM, MCF of FIBTEM excluding CT of EXTEM, INTEM, FIBTEM and strong significant correlation for α-angle of APTEM and moderate for CFT and MCF of APTEM. A significant moderate to strong correlation of factor XIII with MCF of EXTEM, INTEM, FIBTEM, and APTEM was found. Hemoglobin was moderately correlated (r = 0.3-0.7 or r = -0.3 to -0.7) with MCF in APTEM (P = 0.003). A moderate to strong correlation of the standard coagulation tests with all ROTEM parameters was found, in particular the CT. The aPTT correlated significantly moderate to strong with CT, CFT, α-angle, and MCF of INTEM. However, multiple linear regressions were not able to show an influence of INR on ROTEM parameters except for APTEM-MCF. A significant impact of the aPTT on INTEM-CT was found. EXTEM, INTEM, and APTEM are significantly influenced by fibrinogen and platelets., Conclusions: The results confirm the clinical assumption that EXTEM, INTEM, and APTEM are associated with fibrinogen and platelets levels; INTEM-CT significantly to aPTT; and FIBTEM significantly to fibrinogen. Factor VIII showed a significant correlation with all ROTEM parameters except CT of EXTEM, INTEM, FIBTEM, and CFT and MCF of APTEM.

Background: We investigated whether hyperfibrinolysis and its severity was associated with outcome of traumatized and nontraumatized patients., Methods: From April 2008 to April 2010, all emergency patients with hyperfibrinolysis were enrolled in this study. Hyperfibrinolysis patients were divided into traumatized (trauma hyperfibrinolysis group) and nontraumatized (nontrauma hyperfibrinolysis group). The trauma hyperfibrinolysis group was matched with 24 polytrauma patients without hyperfibrinolysis (matched trauma group). Data from rotational thromboelastometry measurements, blood gas analysis (metabolic state), laboratory analysis, injury severity score, and 30-day mortality were collected., Results: Thirty-five patients with hyperfibrinolysis were identified (13 traumatized, 22 nontraumatized). Overall mortality for hyperfibrinolysis was 54%. Mortality in the trauma hyperfibrinolysis group (77%±12%) was significantly higher than in the nontrauma hyperfibrinolysis group (41%±10%; P=0.001, 95% CI 5%-67%) and the matched trauma group (33%±10%; P=0.009, 95% CI 13%-74%). Hyperfibrinolysis is significantly (P=0.017) associated with mortality in trauma patients. In the blood gas analysis representing the metabolic state, only pH (P=0.02) and potassium (P=0.01) were significantly lower in the trauma hyperfibrinolysis group compared to the nontrauma hyperfibrinolysis group., Conclusions: Mortality from hyperfibrinolysis is significantly higher in trauma compared with nontrauma patients, and hyperfibrinolysis is an independent factor predicting mortality in trauma patients. Rotational thromboelastometry provides real-time recognition of hyperfibrinolysis allowing early treatment.

Factor XIII (F XIII) is an essential parameter for final clot stability. The purpose of this study was to determine the impact of the addition of factor (F)XIII on clot stability as assessed by Rotation Thromboelastometry (ROTEM). In 90 intensive care patients ROTEM measurements were performed after in vitro addition of F XIII 0.32 IU, 0.63 IU, 1.25 IU and compared to diluent controls (DC; aqua injectabile) resulting in approximate F XIII concentrations of 150, 300 and 600%. Baseline measurements without any additions were also performed. The following ROTEM parameters were measured in FIBTEM and EXTEM tests: clotting time (CT), clot formation time (CFT), maximum clot firmness (MCF), maximum lysis (ML), maximum clot elasticity (MCE) and alpha-angle (alphaA). Additionally, laboratory values for FXIII, fibrinogen (FBG), platelets and haematocrit were contemporaneously determined. In the perioperative patient population mean FBG concentration was elevated at 5.2 g/l and mean FXIII concentration was low at 62%. The addition of FXIII led to a FBG concentration-dependent increase in MCF both in FIBTEM and EXTEM. Mean increases in MCF (FXIII vs. DC) of approximately 7 mm and 6 mm were observed in FIBTEM and EXTEM, respectively. F XIII addition also led to decreased CFT, increased alphaA, and reduced ML in FIBTEM and EXTEM. In vitro supplementation of FXIII to supraphysiologic levels increases maximum clot firmness, accelerates clot formation and increases clot stability in EXTEM and FIBTEM as assayed by ROTEM in perioperative patients with high fibrinogen and low FXIII levels.