Search

Chiral discrimination is of crucial importance for many applications, including drug cross checking and electronic tongue-type devices. In a typical sensing scheme, an enantiomeric selector is combined with an appropriate transduction mechanism. We propose here a hybrid material composed of an electrically conducting oligomer i.e. oligo-(3,3'-dibenzothiophene) bearing inherently chiral features and polypyrrole as a support, which can undergo electrochemical actuation. The combination of both leads to a freestanding film that is addressable in a wireless way based on the principle of bipolar electrochemistry. The induced redox reactions lead to well-pronounced actuation when DOPA with the right chirality is present in solution as a model analyte, whereas absolutely no electromechanical response is measured for the wrong enantiomer. This constitutes a straightforward and absolute read out of chiral information where the amplitude of actuation is correlated with the concentration of the analyte. Optimization of the scheme results in highly efficient bending and thus opens up new directions in the field of chiral technologies.

Two new inherently chiral oligothiophenes characterized by the atropisomeric 3,3'-bithianaphtene scaffold functionalized with fused ring bithiophene derivatives, namely 4H-cyclopenta[2,1-b3:4b']dithiophene (CPDT) and dithieno[3,3-b:2',3'-d]pyrrole (DTP), were synthesized. The racemates were fully characterized and resolved into antipodes by enantioselective HPLC. The enantiomers were analyzed through different chiroptical techniques: electronic circular dichroism (ECD) and vibrational circular dichroism (VCD) were employed to attribute the absolute configuration (AC). Comparison of experimental and calculated VCD spectra confirmed the DFT calculated conformational characteristics. The compound functionalized with two CPDT units was oxidized with FeCl 3 , and ECD and CPL of the resulting material were measured. Circularly polarized luminescence (CPL) was measured to verify if inherently chiral oligothiophenes could be promising systems for chiral photonics applications., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

"Inherently chiral" thiophene-based electroactive oligomer films have recently been shown to exhibit outstanding chirality manifestations. One of the most exciting among them is an unprecedented enantioselection ability as electrode surfaces. In fact, in preliminary chiral voltammetry experiments, the new electrodes have been shown to both discriminate the enantiomers of chiral probes (either enantiopure or in a mixture, in terms of large differences in peak potentials) and quantify them (in terms of linear dynamic ranges in peak currents), without the need for preliminary separation steps. Such ability has now been tested on a series of chiral DOPA-related molecules, from phenolic amino acid tyrosine (together with its methyl ester) to catecholic amino acid DOPA (together with its methyl ester), to catecholamine epinephrine (adrenaline). The wide-range enantioselectivity of the new inherently chiral electrode surfaces is fully confirmed, as large peak potential differences are obtained for probe enantiomers of the whole series working in common aqueous buffers. Moreover, interesting modulating effects on enantiodiscrimination can be observed as a function of both molecular structure and pH. Graphical abstract Inherently chiral thiophene-based electrodes at work with pharmaceutically relevant probes.

The racemate of an inherently chiral "spider-like" octathiophene monomer T83 , in which chirality is generated by torsion in its backbone, was synthesized. The racemate was resolved into configurationally stable antipodes by HPLC on a chiral stationary phase. Electrooxidation of the enantiomers resulted in materials displaying high enantiorecognition ability towards the antipodes of some chiral probes. Moreover, the T83 racemate demonstrated great aptitude to stimulate formation of 3D rigid architectures if used as a cross-linking monomer for molecular imprinting. This feature was exploited to devise a molecularly imprinted polymer-based chemosensor selective for a thymine-adenine oligonucleotide., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A molecularly imprinted polymer (MIP) was designed and synthesized to serve as a functional material for selective recognition of 6-thioguanine (6TG), an antitumor drug. For that, the newly synthesized functional monomer, cytosine-bis(2,2'-bithienyl)-(4-carboxyphenyl)methane ester (Cyt-S4), revealed Watson-Crick type nucleobase pairing of 6TG. Formation of the Cyt-S4 and 6TG complex of the 2:1 stoichiometry was postulated based on the DFT calculations at the B3LYP/3-21G((⁎)) level and experimentally confirmed by fluorescence titration. The molecularly imprinted polymer (MIP) film was deposited by potentiodynamic electropolymerization on a Pt disk electrode as well as on an Au-coated glass slide and on an Au-quartz crystal resonator. The statistical model of formation of this film was successfully simulated by molecular dynamics. Completeness of the subsequent 6TG template extraction from MIP was confirmed by the UV-visible spectroscopy. An imprinting factor of 2.9 for the MIP film was determined by piezoelectric microgravimetry using ECQM. The double-layer capacity and alternating current measurements under flow-injection analysis (FIA) conditions were selected to transduce the 6TG recognition signal into the change of the double-layer capacity dependence on the 6TG concentration in solution for different supporting electrolyte concentrations. Detectability of the resulting chemosensor was 10 µM 6TG for the 0.5 M KF carrier solution in FIA. Selectivity of the chemosensor with respect to common interferences was high, e.g., it exceeded 130 to 2-amino-6-methylmercaptopurine, a 6TG metabolite., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Linear conjugated oligothiophenes of variable length and different substitution pattern are ubiquitous in technologically advanced optoelectronic devices, though limitations in application derive from insolubility, scarce processability and chain-end effects. This study describes an easy access to chiral cyclic oligothiophenes constituted by 12 and 18 fully conjugated thiophene units. Chemical oxidation of an "inherently chiral" sexithiophene monomer, synthesized in two steps from commercially available materials, induces the formation of an elliptical dimer and a triangular trimer endowed with electrosensitive cavities of different tunable sizes. Combination of chirality with electroactivity makes these molecules unique in the current oligothiophenes literature. These macrocycles, which are stable and soluble in most organic solvents, show outstanding chiroptical properties, high circularly polarized luminescence effects and an exceptional enantiorecognition ability., (© 2014 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA. This is an open access article under the terms of the Creative Commons Attribution Non-Commercial NoDerivs License, which permits use and distribution in any medium, provided the original work is properly cited, the use is non-commercial and no modifications or adaptations are made.)

Careful analysis and comparison of optical and electrochemical data available in recent literature for multi-thiophene molecular assemblies suggested a few basic rules for the design of structurally simple and easily accessible oligothiophenes endowed with properties not far from those exhibited by much more complex and synthetically demanding architectures. The synthesis and computational investigation of three examples of a class of oligothiophenes (spider-like) tailored according to these indications are reported together with their exhaustive optical and electrochemical characterization. The new compounds (T9 5, T14 6, T19 7) are characterized by a thiophene, a 2,2'-bithiophene and a 2,2',5',2''-terthiophene unit (the spider body) fully substituted with 5-(2,2'-bithiophen)yl pendants (the spider legs). Absorption and electrochemical data are in good agreement and point to a high pi-conjugation level, comparable to those displayed by much larger assemblies. Electrode potential cycling in proximity of the first oxidation peak affords fast and reproducible formation of conducting, highly stable [TXn]m films, mainly consisting of dimers (m=2). Electrooxidation kinetic experiments on deuterium-labelled T9 5, coupled to laser-desorption-ionization mass spectroscopy on the resulting dimer demonstrated that the coupling process is extremely regioselective in the alpha positions of the more conjugated pentathiophene chain. The optical and the electrochemical properties of the films are reported and discussed. A peculiar feature is their impressive charge-trapping ability. Spider-like oligothiophenes are promising materials for applications as active layers in multifunctional organic devices.

An environmentally friendly and sustainable approach was adopted to produce a molecularly imprinted polymer (MIP) via electropolymerization, with remarkable electrochemical sensing properties, tested in tyrosine (tyr) detection. The 2,2′-bis(2,2′-bithiophene-5-yl)-3,3′-bithianaphtene (BT2-T4) was chosen as functional monomer and MIP electrosynthesis was carried out via cyclic voltammetry on low-volume (20 μL) screen-printed carbon electrodes (C-SPE) in ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ((BMIM) TFSI). An easy and rapid washing treatment allowed us to obtain the resulting MIP film, directly used for tyr electrochemical detection, carried out amperometrically. The sensor showed a linear response in the concentration range of 15–200 μM, with LOD of 1.04 µM, LOQ of 3.17 μM and good performance in selectivity, stability, and reproducibility. Tyrosine amperometric detection was also carried out in human plasma, resulting in a satisfactory recovery estimation. The work represents the first use of BT2-T4 as a functional monomer for the production of a molecularly imprinted polymer, with a green approach afforded by using a few microliters of a room temperature ionic liquid as an alternative to common organic solvents on screen-printed carbon electrodes, resulting in a valuable system that meets the green chemistry guidelines, which is today an essential criterion in both research and application field. [ABSTRACT FROM AUTHOR]

Herein, we report on the synthesis and high-performance liquid chromatography (HPLC) resolution of a new atropisomeric C2-symmetry chiral monomer based on the 3,3′-bithiophene core, which was developed to produce novel, inherently oligomeric chiral electroactive materials. The analytical enantioseparation was optimized using the cellulose-type Chiralpak IB-3 column and a mixture of n-hexane–methanol–dichloromethane 90:5:5 (v/v/v) as the mobile phase. During the scale-up of the enantioseparation analytical conditions to a semipreparative level, remarkable deformations in the HPLC profile, such as peak splitting and plateau zones between enantiomeric peaks, were observed. We demonstrate the effects of sample diluent as they relate to distorted peak profiles, as well as provide experimental solutions to prevent the disturbing phenomenon. The optimized chromatographic conditions were exploited to collect milligram amounts of the enantiopure sample, which was submitted to chiroptical and stereochemical characterization studies. [ABSTRACT FROM AUTHOR]

The synthesis and characterization of three new inherently chiral N,N′‐dipropyl‐3,3′‐diheteroaryl‐2,2′‐biindole monomers, nicknamed Ind2T4, Ind2T6 and Ind2Ph2T4, which differ in the number of thiophenes as terminals, are reported. In addition to a full monomer characterization, stable electroactive oligomeric films were obtained by electro‐oxidation upon cycling to potentials which activate the thiophene terminals. Cyclic voltammetry, UV‐Vis‐NIR spectroelectrochemistry and in situ conductance measurements show that oligomeric films of Ind2T6 present the best stability and electrochromic switching performance. Enantioselective tests with a chiral ferrocene amine clearly show the potential as chiral selectors for analytical and sensing purposes. [ABSTRACT FROM AUTHOR]

In the present paper, the synthesis and characterization of 2,2′-bis{bi[2,2’-(3,4-ethylenedioxy)thiophen-5-yl]}-3,3′-bithianaphthene, nicknamed BT 2 E 4 , is reported. We show that electrooligomerization of BT 2 E 4 leads to electroactive films which are evaluated by cyclic voltammetry (CV), UV/vis spectroelectrochemistry and CV coupled with in-situ conductance measurements. Direct comparisons to the properties of the oligomers obtained from the atropisomeric all-thiophene analogue BT 2 T 4 show that the introduction of EDOT leads to a strong reduction of the band-gap, an overall red-shifted absorption spectrum and a rigidification of the structure. Finally, DFT and TD-DFT calculations were performed in parallel to investigate and to compare the electronic and molecular structures of neutral and charged monomer and oligomer species. [ABSTRACT FROM AUTHOR]

Two diastereoisomeric pairs of bis-oxazolines, provided with a stereogenic center at carbon 4 and based on the 3,3′-bithiophene atropisomeric scaffold, were synthesized and structurally characterized. They differ in the substituents at positions 2 and 5 of the thiophene rings, which are functionalized with methyl (1) or phenyl (2) groups, respectively. In vibrational circular dichroism (VCD) spectra, recorded in CCl4 solutions, it is possible to distinctly recognize the characteristic features of axial and central stereogenic elements. In tandem with Density Functional Theory (DFT) calculations, the absolute configuration (AC) of the diastereoisomers was safely established. In this case, VCD was shown to be superior to ECD (electronic circular dichroism) in the assignment of AC. The normal modes, evaluated from DFT calculations, show that the VCD signals in correspondence with the stereogenic axis of the bithiophene unit are different for 1 and 2. The VCD spectra of a molecular analog of 1, the (S)-2,2′,5,5′-tetramethyl-4,4′-bis-(diphenylphosphino)-3,3′-bithiophene oxide (3), characterized by the same 3,3′-bithiophene scaffold, but devoid of stereogenic centers, exhibits signals similar to those observed in the case of diastereoisomer (aS,R,R)-1a, associated with almost identical normal modes. Chirality 28:686-695, 2016. © 2016 Wiley Periodicals, Inc. [ABSTRACT FROM AUTHOR]

The racemate of an inherently chiral 'spider-like' octathiophene monomer T83, in which chirality is generated by torsion in its backbone, was synthesized. The racemate was resolved into configurationally stable antipodes by HPLC on a chiral stationary phase. Electrooxidation of the enantiomers resulted in materials displaying high enantiorecognition ability towards the antipodes of some chiral probes. Moreover, the T83 racemate demonstrated great aptitude to stimulate formation of 3D rigid architectures if used as a cross-linking monomer for molecular imprinting. This feature was exploited to devise a molecularly imprinted polymer-based chemosensor selective for a thymine-adenine oligonucleotide. [ABSTRACT FROM AUTHOR]

Linear conjugated oligothiophenes of variable length and different substitution pattern are ubiquitous in technologically advanced optoelectronic devices, though limitations in application derive from insolubility, scarce processability and chain-end effects. This study describes an easy access to chiral cyclic oligothiophenes constituted by 12 and 18 fully conjugated thiophene units. Chemical oxidation of an 'inherently chiral' sexithiophene monomer, synthesized in two steps from commercially available materials, induces the formation of an elliptical dimer and a triangular trimer endowed with electrosensitive cavities of different tunable sizes. Combination of chirality with electroactivity makes these molecules unique in the current oligothiophenes literature. These macrocycles, which are stable and soluble in most organic solvents, show outstanding chiroptical properties, high circularly polarized luminescence effects and an exceptional enantiorecognition ability. [ABSTRACT FROM AUTHOR]

Unknown 1 H-2,7-dihydro-1-phenylphosphepine, containing a 2,2′,5,5′-tetramethyl-3,3′-bithiophene atropisomeric scaffold (Ph-tetraMe-Bithienine), and its oxide have been synthesized and structurally characterized by single-crystal X-ray diffraction analysis. The most evident structural feature is the very small dihedral angle. The electronic properties of the phosphane were quantitatively evaluated by cyclic voltammetry and compared with three other 2,7-dihydro-1-phenylphosphepines differing in the nature of the biaromatic scaffold (biphenyl, 1,1′-binaphthyl and 2,2′-dimethoxybiphenyl). The racemate of the phosphane oxide was resolved into antipodes, which were reduced to the enantiopure phosphanes and employed as ligands in Rh and Pt complexes in homogeneous stereoselective catalytic reactions. The enantioselective ability and catalytic activity of the new mediators were found to be quite modest in the hydrogenation reactions of olefinic double bonds, whereas good performances were achieved in specific C-C bond-forming reactions. The results are interpreted on the basis of the steric and electronic properties of the ligand. [ABSTRACT FROM AUTHOR]

The 2,5-dimethyl-3,4-bis [(2R,5R)-2,5-dimethylphospholano]thiophene (UlluPHOS), a new thiophene-based analogue of (R,R)-1,2-bis(phospholano)benzene (Me-DuPHOS), was synthesized, geometrically and electronically characterized, and employed as ligand of Rh and Ru in some standard hydrogenation reactions of prostereogenic functionalized carbon-carbon and carbon-oxygen double bonds. The synthesis of UlluPHOS is much easier than that provided for Me-DuPHOS. UlluPHOS and Me-DuPHOS display very similar geometries, while the electronic availability of the former is higher than that exhibited by the latter. The Rh and Ru complexes of UlluPHOS produced excellent enantiomeric excesses (98.9-99.5%) in the hydrogenation of N-acetyl-α-enamino acids and reaction rates higher than those found when employing the analogous complexes of Me-DuPHOS. [ABSTRACT FROM AUTHOR]

Describes the four-step straightforward synthesis of enantiopure(+)- and (-)-2,2',5,5'-tetramethyl-4,4'-bis(diphenylphosphino)-3,3'-bithiophene, A C2-symmetry chelating ligand for transition metals. Use of 2,5-dimethylthiophene as starting material; Application of the complexes of this electron-rich diphosphine with Ru(II) and Rh(I) as catalysts.

A correction to an article related to inherently chiral thiophene-based electrodes published in a previous issue of the journal is presented.

Abstract: Novel thiophene-based oligomer, 2,2′-bis(2,2′-bithiophene-5-yl)-3,3′-bithianaphthene (TX), was designed and synthesized, and its electrochemical and spectral properties characterised. TX was readily polymerised electrochemically to form well organized conducting homopolymer films on various solid electrode substrates. Moreover, it was successfully used for deposition by electropolymerisation of electrochemically active thin films of co-polymers with three different monomers of functionalised bis(2,2′-bithienyl)methane derivatives. It appeared that TX was an effective crosslinker and 3D promoter in these electropolymerisations involving co-monomers intrinsically showing limited aptitude for the electropolymerisation or forming polymer films of low conductivity. This attractive TX ability stems from combination of its (i) high conjugation efficiency in each of the two planar moieties, (ii) intrinsic 3D structure on account of the presence of the central node, and (iii) intrinsic regioselectivity in electropolymerisation on account of the positions of the two available free α-thiophene sites. [ABSTRACT FROM AUTHOR]

The novel [Re2(μ-H)(μ-OOC-CPDT)(CO)6(μ-3-Me-pydz)] complex (1; OOC-CPDT = 4H-cyclopenta[2,1-b:3,4-b']dithiophene-4-carboxylate, 3-Mepydz = 3-methylpyridazine) has been prepared and characterized by single-crystal X-ray diffraction, density functional theory (DFT), and time-dependent DFT computations, UV-vis absorption and emission spectroscopy, and cyclic voltammetry (CV). The measured properties indicate the lack of electronic communication in the ground state between the CPDT and the rhenium diazine moieties. Oxidative electropolymerization of 1, achieved by repeated potential cycling (-0.4 to +1.0 V vs Fc+/Fc, in acetonitrile) with different supporting electrolytes, on different electrodes, afforded an electroactive and stable metallopolymer (poly-1). In situ measurements of the mass of the growing film (on a gold electrode, with an electrochemical quartz microbalance) confirmed the regularity of the polymerization process. The polymer exhibits two reversible oxidation peaks of the thiophene chain and a broad irreversible reduction peak (-1.4 V, quite close to that observed for the reduction of monomer 1), associated with a remarkably delayed sharp return peak, of comparable associated charge, appearing in close proximity (+0.3 V) to the first oxidation peak of the neutral polythiophene chain. This charge-trapping effect can be observed upon repeated cycles of p and n doping, and the negative charge is maintained even if the charged electrode is removed from the solution for many hours. Electrochemical impedance spectroscopy showed that the main CV oxidation peak corresponds to facile charge transfer, combined with very fast diffusion of both electrons and ions within the polymer. In summary, poly-1 provides a new example of a metallopolymer, in which the conductive properties of the π-conjugated system are added to the redox behavior of the pendant-isolated complexes. [ABSTRACT FROM AUTHOR]

Abstract: The electroreduction of bromothiophenes on Au and Ag provides a striking model of synergy in electrocatalysis, when a second group specifically interacting with the catalytic surface is present besides the reacting one, providing an auxiliary anchoring effect. The high catalytic activity of Ag for bromobenzene reduction is enhanced in the bromothiophene case. Moreover, Au, having for bromobenzene a much lower and less reproducible catalytic effect than Ag on account of the repulsive effect of its very negative surface charge in the working potential range, approaches Ag activity in the case of 2-bromothiophene, where the anchoring S group is adjacent to the Br group to be cleaved. The beneficial anchoring effect is lower when it has to be shared between two Br leaving groups adjacent to the S group, and becomes negligible in the case of a bromide leaving group in 3-position. [Copyright &y& Elsevier]