Search

Magnetic refrigeration is a new environmentally benign technology and a promising alternative to conventional vapor-cycle refrigeration. The household refrigerator without a freezing compartment shows very good prospects for a successful application. This article starts with the general principle of magnetic refrigeration. An example of a magnet assembly is proposed and the corresponding magnetic flux lines are evaluated with a three-dimensional finite-element method (FEM). The maximum specific cooling capacity of magneto caloric materials is described. The specific cooling power of a magneto caloric material is found to be large even for medium magnetic field changes, especially if the frequency is not too small. For a domestic magnetic refrigerator, a comparison with a standard compressor refrigerator is presented. The modeling of a rotary magnetic refrigerator is described and its dynamic behavior is investigated. The physical model is based on a mapping of the magneto-thermodynamic problem from a cylinder onto two rectangles. In this model, in a basic centre cell, two coupled linear partial differential equations are solved, which have been programmed in the Modelica language. Steady-state solutions are envisaged to determine the coefficient of performance, COP, for these conditions. In future work the developed model shall be applied for an optimization of the magnetic refrigerator and to determine the related best parameters.

A first part of the article contains a thermodynamic theory describing the temperature distribution in a Curie wheel. The occurring nonlinear ordinary differential equation has an analytical solution. If a Curie wheel is stabilized by levitation, it is named Palmy wheel. These wheels show a full structure, and because of this reason, their uptake of heat from a flame (Curie wheel) or by (solar) light absorption (Palmy wheel) only on the periphery of a cylinder is very limited. To improve the method, a modification of the principle by introducing a convective heat transport into a porous wheel is discussed. By this the power conversion rate from a heat flux to mechanical and electric power is very much increased. The second part of the article presents results of a theoretical/numerical study on the efficiencies of magnetic power conversion plants operating with porous wheels. Furthermore, these efficiencies which are promising-are compared with those of existing power conversion plants, as e.g. geothermal binary cycle power plants. (C) 2008 Published by Elsevier B.V.

In a rotary magnetic refrigerator a porous ring is turning in and out of a magnetic field region. The adiabatic demagnetization of the magnetocaloric material produces the "cold energy". This is described by a discontinuous temperature decrease, known as adiabatic temperature difference. For such a machine a physical model has been developed, based on a mapping of the magneto-thermodynamic problem. In this model, in a basic centre cell, two coupled linear partial differential equations are solved, which have been programmed in the Modelica language. The operation of a magnetic refrigerator is simulated with numerous parameters. Steady state solutions are obtained to verify the coefficient of performance under stable operation conditions. Optimal running conditions defined by maximum values of the coefficient of performance - are not presented in this article, but can now easily be obtained with the existing program. A simple regulation strategy is proposed and implemented into the program. (C) 2010 Elsevier Ltd and IIR. All rights reserved.

An investigation under which conditions industrial waste heat utilised with magnetic energy conversion machines can be a possible alternative to conventional energy conversion technologies is presented. The application of a numerical model leads to the thermodynamic efficiency, the exergy efficiency, and approximate values of the total mass and the total volume of a magnetic energy conversion machine. The exergy efficiency depends strongly on the magnetic field strength. A high frequency of operation reduces the mass and volume of a device. Magnetic energy conversion may beat conventional technologies, especially if large low-exergy heat sources are at ones disposal.