Search

Since the fusing process in electrophotography has a significant impact not only on printing quality but also on machine internal temperature and toner blocking on outlet tray, accurate paper temperature prediction for various types of papers is essential, especially in the production printing. To develop the thermophysical model of fusing process to predict the paper temperature after the fusing process, thermal properties such as thermal conductivity, specific heat, and thermal contact resistance of several types of papers are necessary. However, paper is composed of complex fiber, surface coating, filler, and moisture, making it difficult to measure thermophysical properties of paper accurately. This work developed a machine learning (ML) model that can predict the thermophysical properties of paper based on a conventionally used 1D thermal network model of the fusing process and experiment results. The thermophysical properties of each paper obtained by ML and the thermophysical properties obtained by the conventional method were input to the thermal network model to predict the paper temperature after the fusing process and compared with the measured paper temperatures of the experiment. The results showed that the paper temperature was predicted with higher accuracy by using thermophysical properties obtained by ML than that by the conventional method. Although the method for predicting paper temperature by using only ML had been proposed, it had the disadvantage of requiring a large number of training experiments. In contrast, this method trained under the conditions of one fusing temperature and two printing speeds, and was able to predict under five fusing temperatures and four printing speeds. [ABSTRACT FROM AUTHOR]

Highlights To tackle the ease of aggregation issue of highly hydrophilic microfibrillated cellulose (MFC) in polypropylene (PP) that thus results in an undesired reinforcing effect, this work developed an effective and industrially feasible strategy combining pre‐quaternization of pulp fibers with paper‐making process to fabricate PP/MFC composite with enhanced performance. Effects of MFC consistency, maleic anhydride grafted polypropylene (MAPP) content, and plasma treatment of chopped PP fibers on the mechanical and thermal properties of resultant composites were systematically investigated. The surface‐quaternized MFC obtained by a low‐consistency refiner (L‐MFC) exhibited a higher aspect ratio and degree of fibrillation than the corresponding surface‐quaternized MFC obtained by a high‐consistency one (H‐MFC). It was found that there existed a synergistic effect between pre‐quaternization and the paper‐making process in promoting the dispersion of MFC in PP. As compared with L‐MFC, a higher reinforcing efficiency on PP was achieved for H‐MFC, which was because the former one was more prone to form the fibril aggregates in the PP matrix. Due to both the entangled network of MFC and its nucleation effect on PP, the heat deflection temperature (HDT) of resulting composites was largely increased up to 159.9°C, an increase of 68.7°C with respect to that of PP. The H‐MFC yielded a superior reinforcement on PP than L‐MFC. The optimum mechanical properties of PP/composites were achieved at 15% MAPP. Interfacial bonding between PP and H‐MFC was enhanced by plasma treatment. An increase in Tc of the PP matrix was noted for PP/MFC. A maximum increase of 159.9°C in HDT was achieved for PP/MFC. [ABSTRACT FROM AUTHOR]

Poly(p-phenylene benzobisoxazole) fiber is a kind of rigid-rod polymer fiber and has a fibrillar structure. It can be fibrillated through a refining process. In this study, the highly fibrillated poly(p-phenylene benzobisoxazole) fiber, which consists of poly(p-phenylene benzobisoxazole) fibrils, was prepared by refining and fractionalizing. It was found that the poly(p-phenylene benzobisoxazole) fibril has a specific surface area of 41.5 m2/g, and the diameter can be tens of nanometers. Poly(p-phenylene benzobisoxazole) fibrils can be prepared into the paper by a wet-laid formation process. It was found that the average pore size of poly(p-phenylene benzobisoxazole) paper was 0.64 μm. The filtration efficiency of poly(p-phenylene benzobisoxazole) paper was 99.96% for particles with a size of 150 nm. After being heated at 400°C for 5 min, the poly(p-phenylene benzobisoxazole) paper could still retain a complete structure and have a filtration efficiency of 99.58%. It is suggested that poly(p-phenylene benzobisoxazole) paper has a potential application in high-efficiency particulate air filters used in air and gas treatment systems in some industrial facilities to resist heated air with a temperature of 400°C. [ABSTRACT FROM AUTHOR]

The high production of paper, followed by a more significant concern with environmental and economic issues, has led to greater relevance to paper recycling and its raw uses as composite filler. Composites of polypropylene with 10, 20, and 30 wt.% of recycled office waste paper were produced by injection molding and characterized by mechanical and thermal properties. All composites presented a slight reduction of 15°C in thermal stability compared to the polymeric matrix. Moreover, as the filler amount increased, the degree of crystallinity was reduced proportionally. The mechanical test showed similar tensile strength values among neat polymer andcomposites but also showed an increase in the composite’s tensile modulus, related to the stiffness of the natural filler. The composite with a higher percentage of waste paper (30 wt.%) maintained equivalent properties as neatpolypropylene and other composites (10 and 20 wt.%). Thus, 30 wt.% composites proved to be an excellent material with less synthetic polymer percentage, keeping thermal and mechanical properties comparable to the neat PP.Furthermore, this composite does not need chemical treatment or additives harmful to the environment. It is suitable for future applications in various plastic products such as packaging and domestic utensils.

Here, we propose a sensing scheme based on an all-dielectric metamaterial with the smooth reflection and transmission spectral lines in 10-60THz, and verify the applications of the measuring the resonance characteristics of Xuan paper samples. The reflection and thermal conductivity of Xuan paper samples enhance with the concentration of alum water increasing and weaken due to the thickness increasing. These results provide a solid foundation for this metamaterials in measuring the reflective and thermal resonance properties of Xuan paper samples. [ABSTRACT FROM AUTHOR]

Non-recyclable fiber rejects from paper mills, particularly those from recycled linerboard mills, contain high levels of structural carbohydrates but are currently landfilled, causing financial and environmental burdens. The aim of this study was to develop efficient and sustainable bioprocess to upcycle these rejects into polyhydroxybutyrate (PHB), a biodegradable alternative to degradation-resistant petroleum-based plastics. To achieve high yields of PHB per unit biomass, the specific objective of the study was to investigate various approaches to enhance the hydrolysis yields of fiber rejects to maximize sugar recovery and evaluate the fermentation performance of these sugars using Escherichia coli LSBJ. The investigated approaches included size reduction, surfactant addition, and a chemical-free hydrothermal pretreatment process. A two-step hydrothermal pretreatment, involving a hot water pretreatment (150 °C and 15% solid loading for 10 min) followed by three cycles of disk refining, was found to be highly effective and resulted in an 83% cellulose conversion during hydrolysis. The hydrolysate obtained from pretreated biomass normally requires a detoxification step to enhance fermentation efficiency. However, the hydrolysate obtained from the pretreated biomass contained minimal to no inhibitory compounds, as indicated by the efficient sugar fermentation and high PHB yields, which were comparable to those from fermenting raw biomass hydrolysate. The structural and thermal properties of the extracted PHB were analyzed using various techniques and consistent with standard PHB. [ABSTRACT FROM AUTHOR]

Foam-forming technique imparts ceramic fiber paper with excellent uniformity, low density, and high porosity, but its strength loss must be compensated. Herein, a flexible and rigid foam-formed ceramic fiber network was manufactured by using different strength improvement methods and simultaneously investigated their strength and thermal insulation properties. Sufficient strength (1136 kPa) was achieved by combining Polyvinyl alcohol (PVA) 2 % and Polyester (PET) 3 %. However, the tensile strength of fiber networks would decrease under the contribution of inter-fiber bonding area reduced when the fiber length was longer than 24 mm. Benefiting from the developed flocculation system (aluminum sol-anionic polyacrylamide-carboxymethylcellulose), the strength of the foam-formed ceramic fiber network was 20 kPa, the retention rate increased from 75 % to 88 %, and the average aggregation factor of fillers in the Z direction was 0.67. By adjusting the ratio and Z-directional distribution of functional fillers, the sintered foam-formed paper with a tensile strength of 1300 kPa and compressive strength of 1000 kPa could be obtained. The thermal insulation performance (thermal conductivity 0.03252 W/(m·K)) was similar to the quartz fiber paper reinforced silica airgel, and the flame resistance was better than the commercialized aluminum silicate wool board. [ABSTRACT FROM AUTHOR]

Meta‐aramid paper has been widely used in transformers because of its excellent insulation properties and thermal stability. However, with the rapid development of high‐voltage transformers, higher requirements are placed on the breakdown strength of meta‐aramid paper. In this study, meta‐aramid chopped fibers/polyphenylene sulfide (MACFs/PPS) composite paper was prepared by a combination of wet‐copying and hot‐rolling technology. Then the microscopic morphology, mechanical properties, crystallization behavior, insulation properties, and thermal stability of the MACFs/PPS composite paper were studied and evaluated. The experimental results showed that the breakdown strength of the MACFs/PPS composite paper was as high as 46.46 kV/mm, which was 2.7 times higher than the famous Nomex T410 insulating paper. Meanwhile, the MACFs/PPS composite paper presented good mechanical properties and thermal stability. This paper provides a simple and versatile method for the preparation of meta‐aramid composite paper with high breakdown strength. [ABSTRACT FROM AUTHOR]

A growing research interest currently exists in the use of paper as a building material. This work aims to present the results of a measurement campaign developed on innovative waste paper-based building components. The research was carried out in Southern Italy and used some local by-product aggregates. Three different mixture designs were developed in the laboratory by adding three kinds of biomass to a pulp paper blend: fava bean residues (FB), sawdust powder (SP) and coffee grains (CG) extracted from exhausted chaffs. A physical characterization was carried out measuring the bulk density and bulk porosity. Scanning Electron Microscopy (SEM) analysis of the single aggregates was followed by a microstructure analysis of the final components. Bulk density evaluation showed a range between 200 and 348 kg·m−3. Furthermore, thermal performances were measured; the thermal conductivity of the experimented samples ranged from 0.071 to 0.093 W·m−1·K−1, thus it is possible to classify the tested materials as thermal insulators. Moreover, the acoustic properties were evaluated and tested. The normal incidence sound absorption coefficient was measured by the impedance tube on cylindrical specimens. In general, a different behavior was observed between the upper and lower base of each specimen due to the manufacturing process and the shrinkage caused by the different interactions occurring between the aggregates and the pulp paper waste; for example, the presence of sawdust reduced shrinkage in the final specimens, with consequent smaller physical variations among the two faces. The correlation existing between the manufacturing process and the microstructural properties was also investigated by the estimation of the non-acoustical parameters using the inverse method and taking into account the JCA (Johnson, Champoux and Allard) model as a reference.

The ZrO 2 fiber paper exhibits excellent thermal insulation properties, however, its limited mechanical strength and insufficient thermal stability hinder its widespread applications. The composite fiber papers, using mullite fibers possessing a high aspect ratio and exceptional thermal stability combined with ZrO 2 fibers, were fabricated via a vacuum-assisted filtration method. This method involved the successive stacking of composite fibers with alumina sol, using vacuum-induced directed water flow to create a layered structure reminiscent of nacre. The layered structure of the nacre, which demonstrates remarkable strength and hardness, has also served as a source of inspiration for the architectural design of the fiber paper. The tensile strength of pure ZrO 2 fiber paper was significantly enhanced by the addition of 7 wt% mullite fibers, resulting in a remarkable increase to 0.1805 kN/m. The paper exhibited exceptional resistance to bending, maintaining 96 % of its bending strength even after undergoing 100 cycles. The thermal shrinkage of the composite paper, containing 15 wt% mullite fibers, was reduced from 17.75 % observed in pure ZrO 2 fiber paper to a mere 1.32 % after undergoing heat treatment at a temperature of 1300 °C for 2 h. The composite paper, measuring 5 mm in thickness and consisting of 7 wt% compositions, displayed exceptional thermal insulation properties when exposed to a hot side temperature of 1370 °C. It effectively insulated temperatures up to approximately 1000 °C. [ABSTRACT FROM AUTHOR]

A growing research interest currently exists in the use of paper as a building material. This work aims to present the results of a measurement campaign developed on innovative waste paper-based building components. The research was carried out in Southern Italy and used some local by-product aggregates. Three different mixture designs were developed in the laboratory by adding three kinds of biomass to a pulp paper blend: fava bean residues (FB), sawdust powder (SP) and coffee grains (CG) extracted from exhausted chaffs. A physical characterization was carried out measuring the bulk density and bulk porosity. Scanning Electron Microscopy (SEM) analysis of the single aggregates was followed by a microstructure analysis of the final components. Bulk density evaluation showed a range between 200 and 348 kg·m−3. Furthermore, thermal performances were measured; the thermal conductivity of the experimented samples ranged from 0.071 to 0.093 W·m−1·K−1, thus it is possible to classify the tested materials as thermal insulators. Moreover, the acoustic properties were evaluated and tested. The normal incidence sound absorption coefficient was measured by the impedance tube on cylindrical specimens. In general, a different behavior was observed between the upper and lower base of each specimen due to the manufacturing process and the shrinkage caused by the different interactions occurring between the aggregates and the pulp paper waste; for example, the presence of sawdust reduced shrinkage in the final specimens, with consequent smaller physical variations among the two faces. The correlation existing between the manufacturing process and the microstructural properties was also investigated by the estimation of the non-acoustical parameters using the inverse method and taking into account the JCA (Johnson, Champoux and Allard) model as a reference. [ABSTRACT FROM AUTHOR]

In this article, bamboo nonwoven fabric (BF) is introduced as reinforcement into the vinyl ester (VE) matrix for the manufacturing of BF/VE composites through Vacuum Assisted Resin Transfer Mold process. Eco-friendly (NaHCO3) and other common treatments (NaOH and Silane) are applied to BF to modify the surface chemistry, thereby improving the mechanical strength (tensile modulus 10(NHTB), 11(NCTB) and 11% (SiTB); flexural modulus 11(NHTB) and 90% (SiTB) and impact strength 23% (SiTB)) and thermal properties. Besides, the three flame retardants (FRs) (chitosan (CS), ammonium polyphosphate (APP), and zinc borate) are incorporated with various percentages (3 and 6) for the improvement of flame retardancy of the BF composites and the experiments are proceeded by Taguchi L9 orthogonal array (OA) through the layup method. The nature of pure and modified BF is analyzed using Fourier transform infrared spectroscopy, x-ray diffraction and scanning electron microscopy exhibited the removal of the constituents and formation of reactive sites, etc. The effect of treatment on the thermal and flame retardant properties is analyzed by thermogravimetric analysis, horizontal burning test, and microcalorimeter, respectively. The thermal stability, burning rate, and peak heat release rate were significantly changed than that of pure BF composites.

• New flame-resistant coatings with high mechanical properties for bagasse paper were synthesized using,3-di-aryl-2,2,2,4,4,4-hexachlorocyclodiphosph(V)azane, starch, CaCO 3 , NaHCO 3. • The thermal properties of all specimens were measured. • The ignition properties as the flame chamber (UL/94), and limiting oxygen index (LOI) was measured according to standards. This work aimed to enhance the thermal and mechanical properties of bagasse paper by synthesizing new coatings to prevent bagasse paper from the ignition. Paper sheets were treated with 0.5 percent cychlodiphosph(V)azane/ CaCO 3 solution (1.5 percent), 1.5 percent NaHCO 3 solution, and CNCs mixed with 5.0percent of starch. Paper sheets were treated by immersing bagasse paper in a coating mixture. The paper sheets were then allowed to air dry at ambient temperature. It is important to measure the burning rate (BR) to give people a chance to decrease the loss. These enhancements were investigated using elongation and tensile strength, air permeability test, Fourier Transform Infrared (FTIR) spectroscopy, thermal gravimetric analysis (TGA), and combustion tests (UL/94 and LOI). So, the bagasse paper treatments can be used as packaging materials. [ABSTRACT FROM AUTHOR]

With the increase in heat power density in modern integrating electronics, thermal interface materials (TIM) that can efficiently fill the gaps between the heat source and heat sinks and enhance heat dissipation are urgently needed owing to their high thermal conductivity and excellent mechanical durability. Among all the emerged TIMs, graphene-based TIMs have attracted increasing attention because of the ultrahigh intrinsic thermal conductivity of graphene nanosheets. Despite extensive efforts, developing high-performance graphene-based papers with high through-plane thermal conductivity remains challenging despite their high in-plane thermal conductivity. In this study, a novel strategy for enhancing the through-plane thermal conductivity of graphene papers by in situ depositing AgNWs on graphene sheets (IGAP) was proposed, which could boost the through-plane thermal conductivity of the graphene paper up to 7.48 W m−1 K−1 under packaging conditions. In the TIM performance test under actual and simulated operating conditions, our IGAP exhibits strongly enhanced heat dissipation performance compared to the commercial thermal pads. We envision that our IGAP as a TIM has great potential for boosting the development of next-generation integrating circuit electronics. [ABSTRACT FROM AUTHOR]

The high production of paper, followed by a more significant concern with environmental and economic issues, has led to greater relevance to paper recycling and its raw uses as composite filler. Composites of polypropylene with 10, 20, and 30 wt.% of recycled office waste paper were produced by injection molding and characterized by mechanical and thermal properties. All composites presented a slight reduction of 15°C in thermal stability compared to the polymeric matrix. Moreover, as the filler amount increased, the degree of crystallinity was reduced proportionally. The mechanical test showed similar tensile strength values among neat polymer andcomposites but also showed an increase in the composite's tensile modulus, related to the stiffness of the natural filler. The composite with a higher percentage of waste paper (30 wt.%) maintained equivalent properties as neatpolypropylene and other composites (10 and 20 wt.%). Thus, 30 wt.% composites proved to be an excellent material with less synthetic polymer percentage, keeping thermal and mechanical properties comparable to the neat PP. Furthermore, this composite does not need chemical treatment or additives harmful to the environment. It is suitable for future applications in various plastic products such as packaging and domestic utensils. [ABSTRACT FROM AUTHOR]

The challenge of global climate change has drawn people's attention to the issue of carbon emissions. Reducing the use of petroleum-derived materials and increasing the use of biodegradable materials is a current focus of research, especially in the packaging materials industry. This study focused on the use of environmentally friendly plastics and waste paper as the main materials for packaging films. Poly(butylene succinate- co -lactate) (PBSL) was modified with maleic anhydride (MA) to form a biobased compatibilizer (MPBSL), which was then blended with a mixture (WPS) of waste-paper powder (WP) and silica aerogel powder (SP) to form the designed composite (MPBSL/WPS). The modification of PBSL with MA improved interfacial adhesion between PBSL and WPS. The structure, thermal, and mechanical properties, water vapor/oxygen barrier, toxicity, freshness, and biodegradability of MPBSL/WPS films were evaluated. Compared with the PBSL/WP film, the MPBSL/WPS film exhibited increased tensile strength at break of 4–13.5 MPa, increased initial decomposition loss at 5 wt% of 14–35 °C, and decreased water/oxygen permeabilities of 18–105 cm3/m2·d·Pa. In the water absorption test, the MPBSL/WPS film displayed about 2–6 % lower water absorption than that of the PBSL/WP film. In the cytocompatibility test, both MPBSL/WPS and PBSL/WP membrane were nontoxic. In addition, compared with PBSL/WP film and the control, the MPBSL/WPS film significantly reduced moisture loss, extended the shelf life, and prevented microbial growth in vegetable and meat preservation tests. Both MPBSL/WPS and PBSL/WP films were biodegradable in a 60-day soil biodegradation test; the degradation rate was 50 % when the WP or WPS content was 40 wt%. Our findings indicate that the composites would be suitable for environmentally sustainable packaging materials. [Display omitted] • An environmentally friendly PBSL/WPS film for packing material is successfully fabricated. • Increase of recycling waste paper and PBSL utilization can reduce carbon emissions. • MPBSL/WPS films have comparable properties to pure PBSL. • A formula of MPBSL/WPS products are sustainable and economic. [ABSTRACT FROM AUTHOR]

• Synthesis a new flame resistant coating for bagasse paper using 1,3-di-p-toluidine-2,2,2,4,4,4-hexachlorocyclodiphosph(V)azane, NaHCO 3. • Study the mechanical characteristics. • The thermal properties of the coated and uncoated specimens were measured. • The ignition properties as the flame chamber (UL/94), and limiting oxygen index (LOI) was measured according to standards • Those improvements are due to the synthesis of new flame retardant coatings based on commercially available chemicals. This manuscript aimed to enhance the mechanical, thermal, and ignition properties of bagasse paper when coated with different coatings synthesized from hydroxyethyl cellulose, 1,3-di-p-toluidine-2,2,2,4,4,4-hexachlorocyclodiphosph(V)azane, Talc powder, NaHCO 3 , cellulose nanocrystal. The effect of these coatings on the mechanical properties was studied by measuring elongation, tensile strength, and burst strength. The stages of degradation and ash residue of the measuring specimens were determined using thermal gravimetric analysis (TGA), behind that, the ignition properties as the flame chamber (UL/94), and limiting oxygen index (LOI) was measured according to standards. These tests proved that 1,3-di-p-toluidine-2,2,2,4,4,4-hexachlorocyclodiphosph(V)azane has a direct effect on improving the mechanical characteristics and enhancing the ignition properties of the coated specimens compared to uncoated. In this study the physical, mechanical, thermal, and ignition properties of the bagasse paper sheets were enhanced by easy and low-cost method via synthesis of new coatings based on commercially available chemicals in a reasonable cost. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Engineering (17264073) is the property of Republic of Iraq Ministry of Higher Education & Scientific Research (MOHESR) and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Cu-benzene–1, 3, 5-tricarboxylate (Cu-BTC) coating on carbon fiber paper (CFP@Cu-BTC) is synthesized by using the seed-induced hydrothermal method to improve H 2 adsorption capacity, CO 2 /H 2 selectivity, thermal and electrical conductivity of pure Cu-BTC. The electrical conductivity, effective thermal conductivity (ETC), CO 2 and H 2 adsorption capacity of CFP@Cu-BTC composites synthesized for 3, 9, 18, and 24 h are investigated, respectively. Results show the H 2 adsorption capacity of CFP@Cu-BTC (9 h) is similar to that of pure Cu-BTC. The value of the selectivity of equimolar CO 2 /H 2 (18 h) is 58–209 at 0–100 kPa and 273.15 K. The ETC of CFP@Cu-BTC is 17–25 times higher than that of pure Cu-BTC. The electrical conductivity is 1.3 × 1011–1.6 × 1011 times higher compared to that of pure Cu-BTC. The CFP@Cu-BTC composite can be used as a promising material for H 2 storage and electrodes of ultra-capacitor. • Cu-BTC/CFP is obtained by the seeds induced hydrothermal method. • The selectivity of equimolar CO 2 /H 2 (18 h) can reach up to 58–209. • The thermal conductivity of Cu-BTC/CFP is much higher than that of pure Cu-BTC. • The electric conductivity of Cu-BTC/CFP is 1.3 × 105 S/m when loading 40 wt% Cu-BTC. [ABSTRACT FROM AUTHOR]

• A novel multifunctional flexible inorganic fiber paper was prepared. • Bionic design concept. • The fiber paper had high temperature resistance and hydrophobic. In this paper, a flexible silica fiber paper (SFP) made of silica ceramic with excellent high-temperature resistance was prepared. After modification with fluorosilane, the contact angle of the modified fiber paper with water was 153°. At the same time, the modified fiber paper maintains the superhydrophobic properties even after high-temperature heat treatment (150 ± 1° after treatment at 400 °C) and shows excellent hydrophobic performance at high temperatures. The produced ceramic inorganic fiber paper has good comprehensive properties and is a promising skin material for aircraft. [ABSTRACT FROM AUTHOR]

With the further development of the transmission and distribution network, the requirements for the insulating system of power equipment are further deepened. As one of the important factors, insulating paper is of great value to improve its performance. The pure cellulose model and trapezoidal polyphenylsesquisiloxane (T‐PPSQ) composite model are established to analyze the mechanical and thermal properties of insulating paper cellulose. The effects of T‐PPSQ doping at different temperature on properties of cellulose are investigated by comparing the radial distribution function, mechanical parameters, glass transition temperature, mean square displacement (MSD), and free volume fraction (FVF) through molecular dynamics method. The results show that T‐PPSQ can improve the ability of cellulose to resist shear stress at different temperatures, showing good mechanical properties. When the temperature is 423 K, the mechanical performance parameters elastic modulus, bulk modulus and shear modulus can be increased by 47.2%, 18.2%, and 38.56% at most. The glass transition temperature of the insulating paper cellulose with T‐PPSQ increases by 64 K, the MSD and the FVF all decrease at different temperature which demonstrated it has improved thermal stability. The research in this paper is of great significance for improving the life of the insulating system of power equipment. [ABSTRACT FROM AUTHOR]

Because of excellent insulation properties and thermal stability, meta-aramid paper can be commonly applied to a vast number of fields, like power systems. But poriferous and relatively lax structure of meta-aramid paper would limit its applications in high-voltage environment. This paper proposes a sandwich structure design to combine PDA@BNNS/PMIA film and meta-aramid paper with high breakdown strength. After coating with 6 wt% PDA@BNNS/PMIA solution, this kind of paper became more compact, so there were few pores in the paper and it further enhanced the mechanical and dielectric performances of specimens. The tensile strength in the cross direction increased from 31.3 to 40.5 MPa, and the performance in the machine direction was from 75.5 to 78.9 MPa. Furthermore, the breakdown strength of compound-coated paper achieved 55 kV/mm, which is much higher than meta-aramid paper. Additionally, compound-coated paper still remained outstanding thermal stability. Overall, our fabricated PDA@BNNS/PMIA compound-coated paper has excellent comprehensive properties, which provides a broad prospect for the applications in high-temperature and high-voltage transformers. [ABSTRACT FROM AUTHOR]

To further enhance the performance of nano-silica modified M-phenylene isophthalamide (MPIA) insulation paper, nano-SiO2 particles are modified by 3-aminopropyltriethyloxy silane (APTS) surface into meta-aramid insulation paper to form grafting nano-silica particles (GNP). In order to find the relative best performance of the nanoparticle doping ratio, molecular dynamics simulations were used to study the effect of different GNP volume fractions on the mechanical parameters of the MPIA amorphous region, and the highest mechanical performance was obtained with a volume fraction of 9.4 vol. %. Under this doping condition, the interaction between GNP and MPIA fibers was enhanced by the formation of a large number of hydrogen bonds. The addition of GNP decreased the diffusion of water, acid and gas in MPIA fibers and the influence of these substances on the thermal stability of aramid fibers. All these indicate that the addition of GNP further improves the performance of aramid insulation paper, improves the thermal stability of aramid insulation paper and delays the aging process of oil-immersed aramid insulation paper. This article provides a reference and basis for the preparation of meta-aramid insulation paper with relatively good thermal stability. [ABSTRACT FROM AUTHOR]

The performance of insulating paper cellulose is an important factor affecting the normal operation of electric power equipment. This paper uses molecular dynamics methods to establish pure cellulose, hBN‐modified cellulose, 3‐aminopropyltriethoxysilane (KH550), 3‐glyoxypropyltrimethoxysilane (KH560), and 3‐methylpropoxypropyltris (KH570) grafted with hBN modified cellulose models. The effect of cohesive energy density (CED), thermal conductivity (TC), mean square displacement (MSD), free volume, glass transition temperature (Tg), and mechanical properties on the thermomechanical properties of cellulose are investigated and compared. The results indicate that all three silane coupling agents can enhance TC, thermal stability, and mechanical properties of the cellulose models. Among them, KH550 is the best grafting method for hBN/cellulose system as KH550 graft not only significantly enhances TC by 114.29% and Tg by 23.88% but also significantly strengthens the toughness and resistance to deformation of cellulose by over 50%. [ABSTRACT FROM AUTHOR]

The article describes a science activity program which allows middle school students to understand the mechanism of thermal paper used commonly on receipts and faxes.

Establishing and optimizing a distributed parameter thermal path model for transformer windings is an important means to analyze the hot-spot temperature of the windings; furthermore, in the process of improving the thermal path model of transformers and improving the accuracy of their models, the thermal characteristics of the insulation paper are extremely important. A microscopic thermal contact resistance model was established for the contact interface of insulation paper and copper, according to the microscopic morphology parameters of copper and insulation paper observed by atomic force microscopy, the thermal contact resistance under different temperatures was calculated. A dual heat flow test platform was built to test the heat transfer behavior of four different thickness insulation papers under four temperatures, and the thermal contact resistance and thermal bulk resistance with temperature were analyzed. The results show that as the temperature increases, the thermal resistance of the insulation paper becomes larger and the thermal conductivity decreases. The average error between the experimental and theoretical values of the thermal contact resistance under four temperature points in the study is 6.6%. The results provide a data support for establishing and optimizing transformer heat generation and heat transfer models. [ABSTRACT FROM AUTHOR]

This article is a summary of many years of work by the author, in which the thermal properties of various types of insulating liquids, used in power transformers, were evaluated. Recently, esters have been displacing mineral oil. There is a common view that mineral oil has better thermal properties than esters. This claim is supported by comparative results of tests of both materials as a liquid only filling the remaining volume of the transformer. The effect of the type of liquid on the thermal properties of the paper–oil insulation has not been analyzed so far. On this basis, the conclusions formulated may be incomplete. For this reason, the author has analyzed the influence of the type of liquid on both the thermal properties of the liquid filling the remaining volume of the transformer and the paper–oil insulation. It was proved that the more effective liquid filling the remaining volume of the transformer was indeed mineral oil. On the other hand, a more effective electrical insulating liquid, which is an element of paper–oil insulation, is a natural ester. A comprehensive assessment that takes into account both the paper–oil insulation and the remaining transformer volume showed that the natural ester proved to be a slightly more effective electrical insulating liquid than the other analyzed liquids. [ABSTRACT FROM AUTHOR]

Nanocrystalline cellulose (NCC) was prepared from office waste paper (OWP) by sulfuric acid hydrolysis method in this paper and it was used to prepare a series of poly (lactic acid) PLA/NCC composites by using a dissolution method in solvent N, N‐dimethylformamide solution. The results indicated that with the addition of only 3 wt% NCC, the composites exhibited outstanding mechanical property. The tensile, bending and impact properties of the PLA/3NCC composite were improved by 8.2%, 13.1%, and 35.9% than those of pure PLA, respectively. On this basis, office waste paper fibers (OWF) were also used as a physical blended filler to enhance PLA/NCC composites to reduce the preparation cost of PLA composites and the perfect PLA/NCC/OWF sample was easily manufactured by melting–blending and injection molding. According to the crystallization and melting performance table, both NCC and OWF can act as nucleating agent to promote the crystallization properties on composites, while the blends did not have positive effect on thermal stability. Furthermore, the water absorption and degradation properties of PLA composites were also studied. This work not only provided a novel idea for the utilization of office waste paper but also successfully produced environment friendly composites with favorable mechanical properties and crystallization performance. [ABSTRACT FROM AUTHOR]

The paper presents the results of investigations on the thermal properties of cellulose and aramid paper impregnated with various liquid insulations. The liquid insulations investigated were mineral oil, synthetic ester, and natural ester. The heat transfer coefficient of the liquid was calculated on the basis of measurements of the thermal expansion, specific heat, density, thermal conductivity and kinematic viscosity of the liquid insulations. Temperatures in the paper and liquid insulations were calculated. The results allow to select the best paper and liquid insulations which provide the most effective cooling in transformers. [ABSTRACT FROM AUTHOR]

The chemical graft copolymerization reaction of acrylonitrile (AN) onto paper sheet was performed. The effect of initiator concentration, monomer concentration, and temperature on the reaction rate was studied. The reaction rate equation of the graft copolymerization reaction is found to be R = K [initiator][monomer]. The apparent activation energy ( E) of the copolymerization reaction is found to be 35.99 KJ/mol. The infrared characteristic absorption bands for cellulosic paper structure and the paper gr-AN are studied. Tensile break load, porosity, and burst strength were measured for the grafted and pure paper sheet. It was found that the mechanical properties are improved by grafting. The chemical resistance of the graft product against strong acid (HCl), strong alkali (NaOH), polar and nonpolar solvents was investigated. It was found that the resistance to these chemicals is enhanced by grafting. From the TGA and DTA data, it is clear that the grafted paper sheet is more thermally stable than pure paper sheet. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011 [ABSTRACT FROM AUTHOR]

This study discusses on an attempt to create a transparent conductive paper made by a facile process and environmentally friendly cellulose‐based sorghum as a substitute for glass coating in the display industry that has the advantage of being able to be formed and folded. Sorghum stems with a relatively high cellulose content of around 40% make it a potential material to be used as a conductive transparent paper. The isolation of microfibrillated cellulose from sorghum stem waste using chemicals and sonication methods to obtain cellulose nanofibril (CNF) within a nanometer size range are discussed in this research. Furthermore, lactic acid (LA) as a modifier is added with varying concentrations to explore the effect of its addition on the processing of the transparent paper made from the CNF. Characterization in this study includes several aspects: to investigate the morphology of the CNF paper is carried out by scanning electron microscope. In addition, thermal strength for the product is analyzed using thermal gravimetric analysis. It is found that the CNF paper with 0.5 wt% of LA able to increase paper drying time while still able to maintain the morphology of the transparent paper. [ABSTRACT FROM AUTHOR]

Copyright of Acta Materiae Compositae Sinica is the property of Acta Materiea Compositae Sinica Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

In this study the effects of ink (offset and toner) presence on the mechanical, physical, morphological and thermal properties of newspaper- and office paper fiber-plastic composites were investigated. Printed and unprinted newspaper and office paper fibers were mixed with recycled polypropylene at 50 % by weight fiber loading. The samples were produced with extrusion and compression moulding. The mechanical properties, water absorption and thermal resistances of unprinted and printed newspaper- and office paper fiber-polypropylene composites were compared. In addition, samples were characterized with Fourier transform infrared spectroscopy, and scanning electron microscopy. The obtained results showed that ink presence in the fiber matrix enhanced the water resistance and mechanical properties of fiber plastic composites. Due to ink formulation and fiber characteristics, better results were obtained with printed office paper fiberplastic composites than with printed newspaper fiber-plastic composites. Scanning electron microscopy investigation also confirmed the good interaction between polypropylene and toner-printed office paper fiber. Moreover, differential scanning calorimetry measurements showed that higher crystallization (χcor) values on printed office paper- and newspaper fiber-plastic composites. This work demonstrated that undeinked waste paper fibers could be effectively used as the reinforcing filler in thermoplastic matrices. [ABSTRACT FROM AUTHOR]

Environment friendly composites with favorable mechanical properties and low water absorption performance were successfully produced from poly(lactic acid) (PLA), office waste paper fiber (OWF), and coupling agents. The perfect sample was easily manufactured by melting–blending and injection molding. The PLA/OWF composites were comparable with other PLA/plant fiber composites, and the results indicated that the PLA/OWF composites show better performance than PLA/wheat straw fiber composites and PLA/bamboo fiber composites. On this basis, influence of modification of OWF on the properties of composites was investigated. The infrared results show that the OWF modification by different coupling agents was successful, and the scanning electron microscopy indicates that prepared composites exhibit good interfacial compatibility due to preferable binding force between fiber and matrix. With addition of 2 wt% γ‐(2,3‐propylene oxides)propyl trimethylsilane, the composite exhibits high tensile strength of 58.96 MPa, reflecting increase of 14% than the pure PLA. According to the crystallization and melting performance table, OWF can act as nucleating agent to promote the crystallization properties on composites, while the coupling agents have little effect on thermal stability. This article confirmed that the OWF has appropriate properties and is suitable for preparing composite materials and this work provides a novel idea for the utilization of office waste paper. [ABSTRACT FROM AUTHOR]

Carrageenan fibers crosslinked with trivalent metal ions (Al3+ or Fe3+) were prepared into carrageenan fiber paper (Al/CAP, Fe/CAP) by the Rapid Kothen method, and their flame-retardant mechanism and flame retardancy were studied through LOI, VF, SEM, CONE, and TGA testing. The results showed that Al/CAP exhibited good flame retardancy and thermal stability, and its LOI value reached 52%. Meanwhile, the afterflame time and afterglow time of Al/CAP were 0 and 1 s, respectively, which indicated that it was not ignited and almost had no smoldering phenomenon. The flame-retardant performance of Fe/CAP is inferior to that of Al/CAP, with LOI of 32, but the total smoke emission (TSP) of Fe/CAP is lower in cone calorimetry test. Thus, CAPs (especially Al/CAP) can be widely used in the flame-retardant paper industry, due to their flame retardancy and environmental protection. [ABSTRACT FROM AUTHOR]

The synthesis of ZnO nanowires (NWs) on aramid fiber (AF) surface via a facile in situ hydrothermal method was studied and the as-obtained AFs@ZnO NWs acting as the thermal conductive fiber fillers in the fabrication of aramid paper-based materials by wet-forming process were also investigated. SEM showed a dense and uniform ZnO NWs layer with vertical alignment was well established on surface of AFs. EDS and XRD characterization further confirmed the formation of ZnO NWs on AFs surface. Compared with the pristine paper, the composite paper exhibited better thermal conductivity increased by 129% from 0.0867 to 0.1985 W/m K and kept good insulating properties inherent to aramid paper. The excellent thermal conductivity of aramid paper was mainly attributed to the effective heat conduction networks formed by the AFs@ZnO NWs within the aramid paper. This study proposed an innovative way to fabricate fibrous thermally conductive filler, which effectively improved the dispersion, retention of fillers and interfacial bonding between fillers and fibers. [ABSTRACT FROM AUTHOR]

Abstract: The possibility of co-processing paper sludge with coal in power plants for power production and useful products was investigated as an alternative to the disposal option. The thermal behaviour of the fuels and their blend during pyrolysis and combustion processes was studied, kinetic models were developed and the compatibility of each component in the blend was evaluated. The experiments were conducted in a thermogravimetric analysis system, at non-isothermal heating conditions, over the temperature range 25–850°C. The effect of the inorganic constituents of the fuels and their mixture on thermal conversion characteristics, reactivity, slagging and fouling propensities and environmental pollution was examined. The thermochemical reactivity of the two fuels was different in both nitrogen and air. Devolatilization of paper sludge occurred earlier and with a higher rate, while its combustion was hindered by the high content of ash. When the two fuels were mixed their pyrolysis or combustion reactivities did not substantially change. A first-order parallel reactions model for pyrolysis and a power low model for combustion fitted the experimental results accurately. The kinetic parameters of the blend could be predicted from the data of the individual components. Co-firing paper sludge with subbituminous coal might somehow improve the slagging/fouling potential of the coal. However, if the mineral matter of paper sludge is partly removed before use, then the combustion behaviour of the mixture could resemble that of coal alone and the overall efficiency of the process would increase. [Copyright &y& Elsevier]

The development of eco-friendly thermal insulation material composed of recyclable wastes contributes to enhancing environmental sustainability with less pollution. In this study, polysaccharide-based aerogels with improved thermal insulation property were obtained by using konjac glucomannan, starch, and office waste paper cellulose fiber (WPCF) via sol-gel and freeze-drying method. The obtained aerogels had a bulk density of 30.1–44.9 mg/cm3, a porosity of 95.1–97.0%. Results revealed that increased WPCF addition did not impact the thermal stability, but improved the sol stability, reduced the pore size, strengthened the mechanical property, and lowered the hygroscopicity of the aerogels, benefiting practical application. Although WPCF solids showed a high thermal conductivity, increased WPCF addition at 0.1–0.5 wt% reduced the aerogel thermal conductivity, which was explained by the longer heat path and less heat convention. Further higher WPCF addition at 0.5–1.5 wt% increased the aerogel thermal conductivity as the heat conduction of solid matrix was increased and the heat convection was strengthened. Therefore, the lowest thermal conductivity (0.0335 Wm−1 K−1) of the aerogel was reached at the optimized WPCF addition of 0.5 wt%. This work showed the high potential of the WPCF to be used to strengthen the thermal insulation property of polysaccharide-based aerogels. • Fully bio-based aerogel was prepared with recyclable cellulose fiber addition. • WPCF addition changed the aerogel structure including pore shape and pore size. • The optimum thermal insulation property was achieved at WPCF addition of 0.5 wt%. • The thermal insulation mechanism was interpreted through the pore structure changes. [ABSTRACT FROM AUTHOR]