Search

This paper deals with the results of a study of the thermodestruction of the earlywood and latewood in the 1988-1998 growth rings of Gmelin larch ( Larix gmelinii (Rupr.) Rupr.) trees growing along the polar tree line (7052′53″N, 102°58′26″E, Taimyr Peninsula). The study used methods of thermogravimetry (TG/DTG) and differential scanning calorimetry (DSC). Thermogravimetric data obtained were analyzed by Ozawa-Flynn-Wall kinetic model. We determined macrokinetic parameters of thermodestruction. Earlywood and latewood showed no significant difference in cellulose/hemicellulose/lignin ratio, whereas they differed significantly in destruction average value of activation energy (197.55 and 55.90 kJ mol, respectively). Our analysis of the correlation of thermodestruction values with mean monthly air temperature and precipitation revealed that component composition of both earlywood and latewood was influenced more by the weather conditions at the beginning of the growing season (April-June). Air temperature had markable influence on the wood component composition during cell wall synthesis only in latewood, whereas precipitation influenced the composition in both latewood and earlywood. TG/DTG and DSC methods were found to be promising for developing information on biochemical composition of early and latewood tracheids in stems and for identifying the extent of the influence of climatic changes on cell wall synthesis. [ABSTRACT FROM AUTHOR]

In this study, silica sol (SiO sol) and KCO were used as flame retardants for wood. The synergistic effect of SiO sol and KCO on the flame retardancy, leaching resistance, and thermal properties of wood was investigated. The limiting oxygen index results revealed a significant improvement in the flame retardancy and leaching resistance of the wood sample treated with KCO and SiO sol using the double bath technique. The thermal analysis results showed that the synergistic effect of KCO and the SiO sol effectively prolonged the degradation of the wood sample during the charring stage and improved the stability of the char residue. The thermogravimetry-mass spectrometry analysis and scanning electron microscopy results showed that KCO catalyzed the degradation reaction of the wood sample at lower temperatures resulting in an increase in the water and carbon dioxide output, and the SiO sol formed a compact and melted barrier on the surface of the char residue, which hindered the transfer of heat and combustible gases in the condensed phase. Thus, the combination of KCO and SiO sol proves to be a promising flame-retardant system for wood. [ABSTRACT FROM AUTHOR]

To upgrade the utilization of kraft lignin (KL) for high-performance lignin-based materials (e.g., carbon fiber), the purity, molecular mass distribution (MMD), and thermal properties need to be improved and adjusted to target values. Therefore, different methods, such as ultrasonic extraction (UE), solvent extraction, dialysis, and hot water treatment (HWT), were applied for the purification of KL. The chemical and thermal properties of purified lignin have been characterized by nuclear magnetic resonance, Fourier transform infrared, gel permeation chromatography, elemental analysis, differential scanning calorimetry, and thermogravimetric analysis. The lignin fractions obtained by UE with ethanol/acetone (E/A) mixture (9:1) revealed a very narrow MMD and were nearly free of inorganic compounds and carbohydrates. Further, the E/A-extracted lignin showed a lower glass transition temperature ( Tg) and a clearly detectable melting temperature ( Tm). Dialysis followed by HWT at 220°C is an efficient method for the removal of inorganics and carbohydrates; however, lignin was partly forming condensed structures during the treatment. [ABSTRACT FROM AUTHOR]

The influence of wood components and cellulose crystallinity on the kinetic degradation of different wood species has been investigated using thermogravimetry. Four wood species were studied: Pinus elliottii (PIE), Eucalyptus grandis (EUG), Mezilaurus itauba (ITA) and Dipteryx odorata (DIP). Thermogravimetric results showed that higher extractive contents in the wood accelerate the degradation process and promote an increase in the conversion values at low temperatures. Alternatively, the results indicated that the cellulose crystallinity inhibits wood degradation; organized cellulose regions slow the degradation process because the well-packed cellulose chains impede heat diffusion, which improves the wood’s thermal stability. The wood degradation mechanism occurs by diffusion processes when the conversion values are below 0.4. When the conversion values are above 0.5, the degradation is a result of random nucleation with one nucleus in each particle. [ABSTRACT FROM AUTHOR]

Thermal treatment is one of environmental friendly wood modification processes, developed in order to improve wood’s natural durability and dimensional stability. Beside wood species, mainly isothermal temperature of heat-treatment and process duration affect these properties, which also correlate with the mass losses caused by the treatment. However, there is a lack of suitable external quality control methods. In this work thermogravimetry as a potential method for determining the degree of thermal modification is presented. Several calibration curves, representing the mass losses in a certain temperature range (the values obtained from the TG curves) compared to weight losses caused by previous heat-treatment (known values), were established for spruce wood samples modified at different isothermal temperatures (from 170 to 220 °C). Linear plot and good correlation factors ( R2 = 0.95 and 0.96) were obtained for the TG mass losses from 130 to 280 °C and from 130 to 300 °C, both under nitrogen atmosphere. The predominant cause of mass loss in this temperature region was depolymerisation and thermal decomposition of hemicelluloses residues. Lower correlation factors were obtained under the air atmosphere and in the wider temperature range, respectively. [ABSTRACT FROM AUTHOR]