Search

Developing orally administered pediatric formulations presents significant challenges due to the unique characteristics of pediatric patients. Terbinafine hydrochloride (TER), a powerful antifungal agent, is effective against various fungal infections, including Tinea capitis, which is common in children. However, its low aqueous solubility necessitates innovative pharmaceutical strategies to enhance its effectiveness. This study describes a rational approach to selecting suitable carriers, approved for use in children, to increase the apparent solubility of TER and to guide the development of amorphous solid dispersions containing this drug. Assessments of solubility parameters, equilibrium solubility measurements, and calculations of pediatric dose numbers guided formulation development using theoretical and experimental methodologies. Carriers like Plasdone S-360 ULTRA®, HPMCAS L, and Soluplus® demonstrated favorable solubility parameter values with TER, indicating potential for drug solubilization. The solubility of TER was strongly dependent on pH. In buffer pH 6.5 containing 10% (w/v) of Soluplus®, TER presented the highest solubility value. The solid-state characterization techniques employed to assess the precipitate formed after equilibrium solubility studies during preformulation demonstrated that there were no phase transitions and no significant interactions between the drug and the evaluated carriers. Furthermore, the results demonstrate that Soluplus® achieved the lowest dose number (0.23) for pediatric patients over 6 years old. So, it was selected for preparing the amorphous solid dispersion via spray drying, which significantly enhanced the apparent solubility of TER while maintaining prolonged supersaturation, offering a promising alternative for developing solid formulations of this drug, particularly for pediatric patients, as it aims to improve oral bioavailability. [ABSTRACT FROM AUTHOR]

Background: Terbinafine hydrochloride (TEB) is a broad-spectrum antifungal medication commonly used to treat fungal infections of the skin. This study designed a hydrogel patch assisted by an iontophoresis system to enhance the transdermal permeability of TEB, enabling deeper penetration into the skin layers. Methods: The influences of current intensity, pH levels, and drug concentration on the TEB hydrogel patch's permeability were explored using an adaptive ion electroosmosis system. The pharmacokinetic profile, facilitated by iontophoresis for transdermal permeation, was analyzed through the application of microdialysis technology. Scanning electron microscopy and transmission electron microscopy were employed to assess the impact of ion electroosmotic systems on skin integrity. Results: The cumulative drug accumulation within 8 h of the TEB hydrogel patches, assisted by iontophoresis, was 2.9 and 7.9 times higher than without iontophoresis assistance and TEB cream in the control group, respectively. TEB hydrogel patches assisted by iontophoresis can significantly increase the permeability of TEB, and the AUC(0–8 h) was 3.4 and 5.4 times higher, while the Cmax was 4.2 and 7.3 times higher than the TEB hydrogel patches without iontophoresis, respectively. This system has no significant impact on deep-layer cells. Conclusions: This system may offer a safe and effective clinical strategy for the local treatment of deep antifungal infections. [ABSTRACT FROM AUTHOR]

Aim/Background: According to estimates, about a billion people in the world have fungal infections of the skin, nails, and hair. Skin disorders are a significant contributor to disability, deformity, and misery among people. In the present study, a versatile vesicular delivery of terbinafine hydrochloride through the dermal route in a biocompatible platform consisting of glycerine, phospholipids, and cholesterol is proposed for the treatment of mycoses. Materials and Methods: The glycerosomes of terbinafine hydrochloride were formulated by thin film hydration technique using central composite design to explore the composition effects on the formation of nanosized stable glycerosomes and drug loading. The optimized formulation was evaluated for deformability, antifungal activity, compatibility by FTIR, surface morphology, in vitro and ex vivo drug diffusion, skin irritation, histopathology, and cytotoxicity studies on HaCaT cell lines. Results: Numerical optimization of the design revealed that the particle size and entrapment efficiency of the drug were remarkably affected by the composition. Surface imaging by TEM revealed the formation of well-defined vesicles with no aggregation. The elasticity of the vesicles was established by determining their deformability index. The in vitro and ex vivo drug release study revealed better permeation of the drug compared to the marketed formulation. The histopathology and cytotoxicity study conceded the suitability of the glycerosomal carrier system for the transdermal delivery of terbinafine hydrochloride. Conclusion: Hence it can be concluded that the glycerosomes of terbinafine hydrochloride possess a potential formulation approach for treating dermal infection. [ABSTRACT FROM AUTHOR]

This article presents the findings of a clinical trial that compared the effectiveness of two antifungal creams, ciclopirox olamine and terbinafine hydrochloride, in treating dermatophytosis. The study involved 60 patients with tinea corporis, tinea cruris, or tinea faciei, who were divided into three groups and treated with different creams for 6 weeks. The results showed that both creams were effective in treating the condition, but the combination therapy of both creams had a better response and lower relapse rate. The study acknowledges its limitations, such as a small sample size and short follow-up period, but concludes that the combination therapy is effective with no significant side effects. [Extracted from the article]

Targeted drug delivery is achieving great success in cancer therapy due to its potential to deliver drugs directly to the action site. Terbinafine hydrochloride (TER) is a broad-spectrum anti-fungal drug that has been found to have some potential anti-tumor effects in the treatment of colon cancer. We aimed here to design and develop pH-sensitive Eudragit (Eud)-coated mesoporous silica nanostructures (MSNs) to control drug release in response to changes in pH. The diffusion-supported loading (DiSupLo) technique was applied for loading TER into the MSNs. The formulation was optimized by a D-optimal design, which permits the concurrent assessment of the influence of drug/MSN%, coat concentration, and MSN type on the drug entrapment efficiency (EE) and its release performance. The optimal formula displayed a high EE of 96.49%, minimizing the release in pH 1.2 to 16.15% and maximizing the release in pH 7.4 to 78.09%. The cytotoxicity of the optimal formula on the colon cancer cells HT-29 was higher than it was with TER alone by 2.8-fold. Apoptosis in cancer cells exposed to the optimum formula was boosted as compared to what it was with the plain TER by 1.2-fold and it was more efficient in arresting cells during the G0/G1 and S stages of the cell cycle. Accordingly, the repurposing of TER utilizing Eud/MSNs is a promising technique for targeted colon cancer therapy. [ABSTRACT FROM AUTHOR]

Background: Terbinafine hydrochloride (TEB) is a broad-spectrum antifungal medication commonly used to treat fungal infections of the skin. This study designed a hydrogel patch assisted by an iontophoresis system to enhance the transdermal permeability of TEB, enabling deeper penetration into the skin layers. Methods: The influences of current intensity, pH levels, and drug concentration on the TEB hydrogel patch’s permeability were explored using an adaptive ion electroosmosis system. The pharmacokinetic profile, facilitated by iontophoresis for transdermal permeation, was analyzed through the application of microdialysis technology. Scanning electron microscopy and transmission electron microscopy were employed to assess the impact of ion electroosmotic systems on skin integrity. Results: The cumulative drug accumulation within 8 h of the TEB hydrogel patches, assisted by iontophoresis, was 2.9 and 7.9 times higher than without iontophoresis assistance and TEB cream in the control group, respectively. TEB hydrogel patches assisted by iontophoresis can significantly increase the permeability of TEB, and the AUC(0–8 h) was 3.4 and 5.4 times higher, while the Cmax was 4.2 and 7.3 times higher than the TEB hydrogel patches without iontophoresis, respectively. This system has no significant impact on deep-layer cells. Conclusions: This system may offer a safe and effective clinical strategy for the local treatment of deep antifungal infections.

Spinal infections, notably those induced by Aspergillus flavus (A. flavus), represent a complex and uncommon clinical challenge. In individuals with diabetes mellitus, the risk is exacerbated due to a compromised immune response and a heightened vulnerability to non-standard pathogens. This case report chronicles the intricate diagnostic and treatment journey of a 59-year-old diabetic patient grappling with a spinal infection attributed to A. flavus. The diagnosis was delayed due to non-specific symptoms and unclear radiological signs. The administration of voriconazole, a targeted antifungal treatment, resulted in a significant clinical and radiological improvement, underscoring its effectiveness in treating such unusual fungal spinal infections; meanwhile, we found that terbinafine hydrochloride also has a similar effect in treating fungal spinal infections. This case underscores the importance of considering fungal causes in spinal infections among diabetic patients and highlights prompt diagnosis and individualized targeted antifungal therapy.

Dermatophytosis, the most prevalent fungal infection, is witnessing a rising incidence annually. To address this challenge, we developed a terbinafine-loaded oil-in-water nanoemulsion (TH-NE) through the aqueous microtitration method. The formulation comprised olive oil (oil phase), Span 80 (surfactant), and propylene glycol (co-surfactant). Pseudo-phase ternary diagrams and thermodynamic studies underscored the stability of TH-NE. Employing the Box–Behnken design (BBD), we optimized TH-NE, which resulted in a remarkable particle size of 28.07 nm ± 0.5, a low polydispersity index (PDI) of 0.1922 ± 0.1, and a substantial negative zeta potential of −41.87 mV ± 1. Subsequently, TH-NE was integrated into a 1.5% carbopol matrix, yielding a nanoemulgel (TH-NEG). Texture analysis of TH-NEG demonstrated a firmness of 168.00 g, a consistency of 229.81 g/s, negative cohesiveness (−83.36 g), and a work of cohesion at −107.02 g/s. In vitro drug release studies revealed an initial burst effect followed by sustained release, with TH-NEG achieving an impressive 88% release over 48 h, outperforming TH-NE (74%) and the marketed formulation (66%). Ex vivo release studies mirrored these results, with TH-NEG (86%) and TH-NE (71%) showcasing sustained drug release in comparison to the marketed formulation (67%). Confocal microscopy illustrated that TH-NEG and TH-NE penetrated to depths of 30 µm and 25 µm, respectively, into the epidermal layer. Furthermore, dermatokinetic studies highlighted the enhanced drug penetration of TH-NEG compared to TH-NE through mouse skin. In summary, our study establishes TH-NEG as a promising carrier for terbinafine in treating dermatophytosis, offering improved drug delivery and sustained release potential. [ABSTRACT FROM AUTHOR]

Terbinafine hydrochloride is a synthetic allylamine whose mechanism of action consists of inhibiting the enzyme squalene epoxidase that participates in the first stage of ergosterol synthesis, interfering with fungal membrane function. Ozonated oils are used for topical application of ozone, producing reactive oxygen species that cause cellular damage in microorganisms, therefore being an alternative treatment for acute and chronic skin infections. This study aimed to develop and characterize Eudragit® RS100 nanocapsules, obtained by interfacial deposition of preformed polymer method, containing 0.5% terbinafine hydrochloride and 5% ozonated sunflower seed oil as a potential treatment against dermatophytes. The polymeric nanocapsules were characterized regarding particle size, zeta potential, pH, drug content, encapsulation efficiency, and stability. The in vitro drug release, in vitro skin permeation, and in vitro antifungal activity were also evaluated. The particle size was around 150 nm with a narrow size distribution, the zeta potential was around + 6 mV, and the pH was 2.2. The drug content was close to 95% with an encapsulation efficiency of 53%. The nanocapsules were capable to control the drug release and the skin permeation. The in vitro susceptibility test showed greater antifungal activity for the developed nanocapsules, against all dermatophyte strains tested, compared to the drug solution. Therefore, the polymeric nanocapsules suspension containing terbinafine hydrochloride and ozonated oil can be considered a potential high-efficacy candidate for the treatment of dermatophytosis, with a possible reduction in the drug dose and frequency of applications. Studies to evaluate safety and efficacy in vivo still need to be performed. [ABSTRACT FROM AUTHOR]

In this article, formulation studies for terbinafine hydrochloride nanoemulsions, prepared by high-energy ultrasonication technique, are described. Pseudo-ternary phase diagram was constructed in order to find out the optimal ratios of oil and surfactant/co-solvent mixture for nanoemulsion production. Clove and olive oils were selected as oil phase. Based on the droplet size evaluation, maximum nanoemulsion region were determined for formulation development. Further characterization included polydispersity index (PDI), zeta potential, Fourier transform infrared (FT-IR) spectroscopy, morphology, pH, viscosity, refractive index, ex vivo skin permeation, skin irritation, and histopathological examination. Droplet sizes of optimized formulations were in colloidal range. PDI values below 0.35 indicated considerably homogeneous nanoemulsions. Zeta potential values were from 13.2 to 18.1 mV indicating good stability, which was also confirmed by dispersion stability studies. Ex vivo permeation studies revealed almost total skin permeation of terbinafine hydrochloride from the nanoemulsions (96–98%) in 6 hours whereas commercial product reached only 57% permeation at the same time. Maximum drug amounts were seen in epidermis and dermis layers. Skin irritation and histopathological examination demonstrated dermatologically safe formulations. In conclusion, olive oil and clove oil-based nanoemulsion systems have potential to serve as promising carriers for topical terbinafine hydrochloride delivery.

In this article, formulation studies for terbinafine hydrochloride nanoemulsions, prepared by highenergy ultrasonication technique, are described. Pseudo-ternary phase diagram was constructed in order to find out the optimal ratios of oil and surfactant/co-solvent mixture for nanoemulsion production. Clove and olive oils were selected as oil phase. Based on the droplet size evaluation, maximum nanoemulsion region were determined for formulation development. Further characterization included polydispersity index (PDI), zeta potential, Fourier transform infrared (FT-IR) spectroscopy, morphology, pH, viscosity, refractive index, ex vivo skin permeation, skin irritation, and histopathological examination. Droplet sizes of optimized formulations were in colloidal range. PDI values below 0.35 indicated considerably homogeneous nanoemulsions. Zeta potential values were from 13.2 to 18.1mV indicating good stability, which was also confirmed by dispersion stability studies. Ex vivo permeation studies revealed almost total skin permeation of terbinafine hydrochloride from the nanoemulsions (96-98%) in 6 hours whereas commercial product reached only 57% permeation at the same time. Maximum drug amounts were seen in epidermis and dermis layers. Skin irritation and histopathological examination demonstrated dermatologically safe formulations. In conclusion, olive oil and clove oil-based nanoemulsion systems have potential to serve as promising carriers for topical terbinafine hydrochloride delivery. [ABSTRACT FROM AUTHOR]

Dermatophytosis, the most prevalent fungal infection, is witnessing a rising incidence annually. To address this challenge, we developed a terbinafine-loaded oil-in-water nanoemulsion (TH-NE) through the aqueous microtitration method. The formulation comprised olive oil (oil phase), Span 80 (surfactant), and propylene glycol (co-surfactant). Pseudo-phase ternary diagrams and thermodynamic studies underscored the stability of TH-NE. Employing the Box–Behnken design (BBD), we optimized TH-NE, which resulted in a remarkable particle size of 28.07 nm ± 0.5, a low polydispersity index (PDI) of 0.1922 ± 0.1, and a substantial negative zeta potential of −41.87 mV ± 1. Subsequently, TH-NE was integrated into a 1.5% carbopol matrix, yielding a nanoemulgel (TH-NEG). Texture analysis of TH-NEG demonstrated a firmness of 168.00 g, a consistency of 229.81 g/s, negative cohesiveness (−83.36 g), and a work of cohesion at −107.02 g/s. In vitro drug release studies revealed an initial burst effect followed by sustained release, with TH-NEG achieving an impressive 88% release over 48 h, outperforming TH-NE (74%) and the marketed formulation (66%). Ex vivo release studies mirrored these results, with TH-NEG (86%) and TH-NE (71%) showcasing sustained drug release in comparison to the marketed formulation (67%). Confocal microscopy illustrated that TH-NEG and TH-NE penetrated to depths of 30 µm and 25 µm, respectively, into the epidermal layer. Furthermore, dermatokinetic studies highlighted the enhanced drug penetration of TH-NEG compared to TH-NE through mouse skin. In summary, our study establishes TH-NEG as a promising carrier for terbinafine in treating dermatophytosis, offering improved drug delivery and sustained release potential.

Abstract Background Worldwide fungal infection cases are increasing by leaps and bounds. The patients who are immunocompromised, i.e., cancer and AIDS, are more susceptible to different types of fungal infections like cutaneous candidiasis and its associate infections. The available treatment for such a disease is creams, gels, etc. However, due to the lack of penetrability and higher systematic absorption, these formulations have reported many side effects. To overcome such challenges, various novel drug delivery systems were introduced. The present research focused on the preparation of glyceryl oleate ufasomes of terbinafine hydrochloride using the film hydration method. Result The prepared formulations were characterized for globular size (nm), zeta potential (mV), PDI, morphological characteristics, thermal behavior, in vitro drug release, in vitro antifungal activity, and in vitro skin permeation retention studies. After suitable formulation optimization using thin-film hydration method, 3:7 drug to glyceryl oleate ratio, UF3 formulation was found to produce higher drug entrapment efficacy (52.45 ± 0.56%), stable anionic zeta potential (− 33.37 ± 0.231 mV), desired globular size (376.5 ± 0.42 nm), and decent polydispersity index (0.348 ± 0.0345). Diffusion-controlled and zero-order sustained release profile was observed in the optimized UF3 batch. From the 5 days in vitro antifungal activity studies, it confirmed that UF3 ufasomes possessed good applicability in more prolonged therapy. Conclusion From the current investigation, it can be concluded that glyceryl oleate ufasomes of terbinafine hydrochloride could be an excellent approach to treat topical fungal infections.

Buccal administration of different active ingredients as an alternative to oral or dermal routes has been widely studied. The films are one of the most investigated dosage forms regarding the buccal formulations developed using bioadhesive polymers. Having thin and flexible structures, the films remain in the mouth for their duration of action without causing any discomfort. There are many studies conducted to develop buccal films for local treatment of oral fungal infections. In this research, buccal films were prepared using terbinafine hydrochloride, which is frequently used orally and systemically in the treatment of fungal infections and has low water solubility. The films were prepared by solvent casting method using hydroxypropyl methyl cellulose (HPMC) and polyvinyl pyrrolidone K30 (PVP) as the bioadhesive polymers and glycerin (2-3%) as the plasticizer. Characterization properties including thickness, weight uniformity, flexibility, tensile strength, swelling capacity were examined and the bioadhesive characteristics were determined by Texture Analyzer device using bovine buccal tissue. According to the findings of bioadhesion studies, the highest bioadhesive properties were detected in F1 and F7 formulations, which contained 5% HPMC. In vitro release studies exhibited that F1 and F7 film formulations with 5% HPMC represented slower and more controlled release compared to F2 and F8 film formulations having 4% HPMC + 1% PVP. The results revealed that the developed buccal formulations loaded with terbinafine hydrochloride might be convenient for the local treatment of oral fungal infections. [ABSTRACT FROM AUTHOR]

Terbinafine hydrochloride is a potent antifungal drug indicated for oral and topical treatment of mycoses. A resonance Rayleigh scattering (RRS) method was developed for the determination of terbinafine hydrochloride through a feasible complexation reaction with erythrosine B. In a weakly acidic medium (acetate buffer, pH 5.0), terbinafine hydrochloride can react with erythrosine B through the electrostatic attraction and virtue of hydrophobic force to form an ion-association complex. The reaction resulted in the appearance of a new RRS peak at 369 nm. The RRS peak was increased by increasing the concentration of terbinafine hydrochloride in the linear range of 0.1–1.5 µg ml−1. All the reaction conditions (erythrosine B concentration, buffer volume, diluting solvent and pH) were optimized. The detection limit was 0.029 µg ml−1 while the quantitation limit was 0.089 µg ml−1. The suggested method after its validation was successfully applied for the determination of terbinafine hydrochloride in different pharmaceutical formulations (tablets and cream) with sufficient recovery.

Bigels with antifungal substances, ciclopirox olamine and terbinafine hydrochloride, were made of hydrogel (poloxamer 407 gel) and oleogel (polyethylene and liquid paraffin mixture). Prepared bigels were found physically stable at room temperature for six months and at least four months at 40 °C. Released amount of drug decreased when oleogel concentration in the formulation increased. Release test results depended on the insertion place of active substances. The amount of released substance was highest when ciclopirox olamine was incorporated in both phases in an equal quantity, and terbinafine hydrochloride in oleogel or in hydrogel. All formulations showed great inhibition of Microsporum canis. Thus, bigels with ciclopirox olamine and terbinafine hydrochloride are a promising dosage form for topical use.

Copyright of Detergent & Cosmetics is the property of Detergent & Cosmetics Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Terbinafine is a new powerful antifungal agent indicated for both oral and topical treatment of mycosessince. It is highly effective in the treatment of determatomycoses. The chemical and pharmaceutical analysis of the drug requires effective analytical methods for quality control and pharmacodynamic and pharmacokinetic studies. Ever since it was introduced as an effective antifungal agent, many methods have been developed and validated for its assay in pharmaceuticals and biological materials. This article reviews the various methods reported during the last 25 years.

The physicochemical properties (pH, yield value, and squeeze force) of a drug for dermatomycosis, a terbinafine hydrochloride-containing cream (a brand-name product), and 12 over-the-counter drugs (OTCs) were measured and compared to ascertain the characteristics of each product. The pH of the brand-name product, Lamisil, was 4.1, and that of the OTC products ranged from 4.2 to 7.6; Lamisil Plus (7.6) had a significantly higher pH. Moreover, the yield value for Lamisil, as an index of cream ductility, was 128 dyn/cm2, and that for the OTC products ranged from 110 to 887 dyn/cm2. In particular, the OTC products Damalin (887 dyn/cm2), Barriact (512 dyn/cm2), and Exiv Deep (663 dyn/ cm2) had a significantly higher yield value. In addition, the squeeze force was measured by attaching a HapLog® to the thumb and second finger. The squeeze force for Lamisil was 12.9 N, and that for the OTC products ranged from 1.8 to 14.6 N. The OTC product Bilumon (1.8 N) had a significantly lower squeeze force. These results indicated that there were marked differences in the pharmaceutical properties of brand-name and OTC products. External preparations are characterized by their feel during use. Based on the current results, the pharmaceutical characteristics of drugs resulted in differences in their feel during use, suggesting that products appropriate for individual patients can be recommended. [ABSTRACT FROM AUTHOR]

We measured and compared the physicochemical properties (pH, yield value, and squeeze force) of a drug for dermatomycosis, terbinafine hydrochloride-containing cream (brand-name product), and 12 generic products to clarify the characteristics of each product. On pH measurement, the pH value of the brand-name product, Lamisil, was 4.8, and those of the generic products ranged from 4.3 to 5.5, showing no marked difference. Furthermore, the yield value of Lamisil, as an index of cream ductility, was 122.2 dyn/cm2, and those of the generic products ranged from 42.1 to 1,621.5 dyn/cm2. In particular, the value of a generic product, Taiyo (42.1 dyn/cm2), was significantly lower, whereas that of another one, Viras (1,621.0 dyn/cm2), was significantly higher. In addition, the squeeze force was measured by attaching a HapLog® to the thumb and second finger. The value of Lamisil was 12.9 N, and those of the generic products ranged from 8.0 to 15.4 N. The values of generic products, Mylan (8.6 N), Tebinaceil (9.0 N), and Kelger (8.0 N), were significantly lower, whereas that of another one, Viras (15.4 N), was significantly higher. These results showed that there were marked differences in the pharmaceutical properties between the generic and brand-name products. The above pharmaceutical characteristics of drugs facilitated the presentation of reasons for differences in the sense of use, which characterizes external preparations, suggesting that products appropriate for individual patients can be recommended. [ABSTRACT FROM AUTHOR]

Non-ionic surfactant micelles are helpful for improving the diffusion of topically delivered drugs through the cornea. This study aimed to develop terbinafine hydrochloride (TH)-loaded micelles based on a soft non-ionic surfactant-macrogol 15 hydroxystearate (HS 15) and to investigate their in vivo cornea permeation. Briefly, 0.25% TH-loaded HS 15 micelles (TH-HNMs) were developed using a simple co-solvent method. Characterization of the TH-HNMs by Zetasizer and transmission electron microscopy (TEM) revealed that the spherical and discrete micellar droplets with a small size (13.22 ± 0.73 nm) and an electrically neutral surface (− 2.15 ± 0.39 mV) were achieved. The drug entrapment efficiency of TH-HNMs was almost 100%. The release of TH from the micelles was pH dependent. 93.2 ± 3.4% of encapsulated TH was released from the micelles in the PBS at pH 5.0 within 6 h, but only 0.122 ± 0.020% of encapsulated TH was released in the PBS at pH 7.4 within the same release time. TH-HNMs possessed good physical stability in the pH neutral medium (pH 7.0).No obvious irritations were observed in rabbit eyes after ocular instillation of TH-HNMs. The in vivo corneal permeation study revealed that the TH-HNMs can penetrate into the corneal epithelium quickly and efficiently in mouse eyes. Good permeability was also noted in the stroma of mouse corneas with de-epithelialization. Compared with the TH oily solution, TH-HNMs delivered considerably increased levels of TH into rabbit corneas with or without de-epithelialization. In conclusion, the easily prepared, small, physically stable and biocompatible TH-HNMs with good ocular bioavailability hold great promise as an efficient carrier for topical ocular delivery of TH. [ABSTRACT FROM AUTHOR]

The solubility of terbinafine hydrochloride in four pure solvents, including methanol, ethanol, n -propanol and ethyl acetate and their binary solvent mixtures, including (methanol + ethyl acetate), (ethanol + ethyl acetate) and ( n -propanol + ethyl acetate) performed at different mass fractions of methanol, ethanol or n -propanol ranging from 0.1 to 0.9, was determined by using isothermal saturation method with temperatures ranging from (278.15 to 313.15) K. The descending order of the mole fraction solubility in pure solvents was as follow: methanol > ethanol > n -propanol > ethyl acetate, and for the three mixture with given initial composition, the solubility of terbinafine hydrochloride increased with increasing temperature and mass fraction of alcohol for the three systems including (methanol + ethyl acetate), (ethanol + ethyl acetate) and ( n -propanol + ethyl acetate). At the same mass fraction of methanol, ethanol or n -propanol and temperature, the solubility of terbinafine hydrochloride was greater in (methanol + ethyl acetate) than in the other mixed solvents. The maximum mole fraction solubility of terbinafine hydrochloride was observed in methanol (6.297 × 10 − 2 at 313.15 K), followed by that in ethanol (3.785 × 10 − 2 at 313.15 K), n- propanol (3.007 × 10 − 2 at 313.15 K) and ethyl acetate (1.497 × 10 − 2 at 313.15 K)·The obtained solubility data were correlated with Jouyban-Acree model, van't Hoff-Jouyban-Acree model, modified Apelblat-Jouyban-Acree model and CNIBS/R-K model. The correlation showed good agreement with experimental results, the largest values of relative average deviations ( RAD ) and the root-mean-square deviations ( RMSD ) between the experimental and calculated solubility were 4.32 × 10 − 2 and 15.28 × 10 − 4 , respectively. On the basis of the obtained solubility, the standard enthalpy of solution ( ΔH sol o ), the standard Gibbs energy ( ΔG sol o ) of solution and the standard entropy of solution ( ΔS sol o ) of terbinafine hydrochloride dissolved in pure and mixed solvents were obtained by the famous van't Hoff calculations. Thermodynamic treatment of solubility data of terbinafine hydrochloride in these pure and mixed solvents by “Apparent thermodynamic analysis” indicated that the dissolution is an endothermic and entropy-driven process. The experimental solubility and the models in this study could be helpful in purifying the crude terbinafine hydrochloride. [ABSTRACT FROM AUTHOR]

The present study was aimed to optimize, develop, and evaluate microemulsion and microemulsion-based gel as a vehicle for transungual drug delivery of terbinafine hydrochloride for the treatment of onychomycosis. D-optimal mixture experimental design was adopted to optimize the composition of microemulsion having amount of oil ( X ), Smix (mixture of surfactant and cosurfactant; X ), and water ( X ) as the independent variables. The formulations were assessed for permeation (micrograms per square centimeter per hour; Y ), particle size (nanometer; Y ), and solubility of the drug in the formulation (milligrams per milliliter; Y ). The microemulsion containing 3.05% oil, 24.98% Smix, and 71.96% water was selected as the optimized formulation. The microemulsion-based gel showed better penetration (∼5 folds) as well as more retention (∼9 fold) in the animal hoof as compared to the commercial cream. The techniques used to screen penetration enhancers (hydration enhancement factor, ATR-FTIR, SEM, and DSC) revealed the synergistic effect of combination of urea and n-acetyl cysteine in disruption of the structure of hoof and hence, leading to enhanced penetration of drug. [ABSTRACT FROM AUTHOR]

In spite of developing new drugs and modern formulations, the treatments of chronic fungal infections are still challenging. Fibrous wound dressings are new suggestions for the treatment of chronic superficial infections. In the present study, we formulated an antifungal agent, terbinafine hydrochloride (TFH), which is a hydrophobic drug, in wound dressings prepared by electrospun polycaprolactone, polycaprolactone/gelatin (50:50 w/w) and gelatin. To obtain more water-stable meshes, the preparations were treated by glutaraldehyde and their properties were determined before and after treatment. The morphology of fibrous meshes was observed by scanning electron microscopy. Drug loading efficiency and release rate were measured by high performance liquid chromatography (HPLC) and the release rate was monitored for 144 h. Antifungal tests were performed on Trichophyton mentagrophytes , Aspergillus fumigatus and Candida albicans cultured on Muller-Hinton agar. The toxicity of the meshes was measured after 24 h and 14 days by MTT assay. Terbinafine loading of polycaprolactone/gelatin (50:50) was 100% and it released the highest amount of TFH too. In antifungal tests, all samples were able to hinder T. mentagrophytes and A. fumigatus but not C. albicans growth among them, polycaprolactone fibers made the largest inhibition zone. In MTT assay, none of prepared samples showed toxicity against L929 cells. Teken together, the prepared TFH-loaded PCL/gelatin electrospun meshes were able to release TFH slowly and in a steady state in time. With respect to no obvious cytotoxicity in MTT assay and stong antifungal activity toward T. mentagrophytes in vitro , these TFH-based meshes could be considered as potential candidates in clinical application as wound dressing for treatment of chronic dermatophytosis. [ABSTRACT FROM AUTHOR]

In this paper, the first part the chemical co-precipitation method was used in the preparation of magnetic nanoparticles and then application of SDS-coated Fe3O4 NPs as an adsorbent for extraction of trace amounts of terbinafine hydrochloride from pharmaceutical company wastewater was investigated. Then the drug was determined by high performance liquid chromatography with UV detection (HPLC/UV). The effects of various parameters on the extraction efficiency such as pH of solution, amount of SDS surfactant, extraction time, eluent type and desorption condithions were studied and optimized. Under the optimal conditions, the calibration curve was linear in the range of 1.0â400 µgL-1 with a correlation coefficient of 0.9998. Enrichment factor of 74 and limit of detection of 0.5µgL-1 were obtained. Also, the percent relative intra-day and inter-day standard deviation (R.S.D %) based on three replicate determinations were 1.0 and 3.5%, respectively. According to the results, the proposed method was successfully applied to extraction of terbinafine from environmental samples and satisfactory results were obtained.

Onychomycosis affects about 15% of the population. This disease causes physical and psychosocial discomfort to infected patients. Topical treatment (creams, solutions, gels, colloidal carriers, and nail lacquers) is usually the most commonly required due to the high toxicity of oral drugs. Currently, the most common topical formulations (creams and lotions) present a low drug delivery to the nail infection. Nail lacquers appear to increase drug delivery and simultaneously improve the effectiveness of treatment with increased patient compliance. These formulations leave a polymer film on the nail plate after solvent evaporation. The duration of the film residence in the nail constitutes an important property of nail lacquer formulation. In this study, a polyurethane polymer was used to delivery antifungals drugs, such as terbinafine hydrochloride (TH) and ciclopirox olamine (CPX) and the influence of its concentration on the properties of nail lacquer formulations was assessed. The nail lacquer containing the lowest polymer concentration (10%) was the most effective regarding the in vitro release, permeation, and antifungal activity. It has also been demonstrated that the application of PU-based nail lacquer improves the nail plate, making it smooth and uniform and reduces the porosity contributing to the greater effectiveness of these vehicles. To conclude, the use of polyurethane in nail formulations is promising for nail therapeutics.

Terbinafine hydrochloride-loaded nanofibrous buccal films were formulated with the aim to improve the solubility and dissolution behavior; thus, the local effectiveness of the antifungal agent. Poly(vinyl alcohol) and chitosan polymer composites were selected as delivery base in order to enhance the mucoadhesion of the fibrous films. The dissolution of terbinafine hydrochloride was carried out applying a stainless steel disc assembly and the terbinafine concentration was determined by HPLC–MS in selective ion monitoring mode. The prediction of the absorption behavior of the prepared fibrous samples in the human oral cavity was modeled using GastroPlus™ software. The result indicates that the fibrous films enabled fast and complete dissolution of the active agent. The drug absorption from the oral cavity could be minimized by the employment of the proper oral transit model. Because of the limited absorption of terbinafine hydrochloride from the oral mucosa the formulation can be beneficial in local administration in the case of hold and expectorate administration mode. [ABSTRACT FROM AUTHOR]

Onychomycosis is a fungal infection of nail unit that is caused by dermatophytes. Oral Terbinafine hydrochloride (TBF-HCl) is being used for the treatment of onychomycosis since 24 years. The side effects caused by the systemic application and limitations of topical administration of this drug regarding the diffusion through nail lead to the development of a new formulation based on, TBF-HCl-loaded liposome. The newly obtained film formulations were prepared and characterized via several parameters, such as physical appearance, drug content, thickness, bioadhesive properties and tensile strength.In vitroandex vivopermeation studies were performed to select an optimum film formulation for antifungal activity to show the efficiency of formulations regarding the treatment of onychomycosis. Thein vitrorelease percentages of drug were found 71.6 ± 3.28, 54.4 ± 4.26, 56.1 ± 7.48 and 46.0 ± 2.43 for liposome loaded pullulan films (LI-P, LII-P) and liposome loaded Eudragit films (LI-E, LII-E), respectively. The accumulated drug in the nail plates were found 31.16 ± 4.22, 24.81 ± 5.35, 8.17 ± 1.81 and 8.92 ± 3.37 for LI-P, LII-P, LI-E and LII-E, respectively, which within therapeutic range for all film formulations. The accumulated drug in the nail plate was found within therapeutic range for all film formulations. The efficacy of the selected TBF-HCl-loaded liposome film formulation was compared with TBF-HCl-loaded liposome, ethosome, liposome poloxamer gel and ethosome chitosan gel formulations. It was found that TBF-HCl-loaded liposome film formulation had better antifungal activity on fungal nails which make this liposome film formulation promising for ungual therapy of fungal nail infection. [ABSTRACT FROM PUBLISHER]

Terbinafine is a new powerful antifungal agent indicated for both oral and topical treatment of mycosessince. It is highly effective in the treatment of determatomycoses. The chemical and pharmaceutical analysis of the drug requires effective analytical methods for quality control and pharmacodynamic and pharmacokinetic studies. Ever since it was introduced as an effective antifungal agent, many methods have been developed and validated for its assay in pharmaceuticals and biological materials. This article reviews the various methods reported during the last 25 years. [ABSTRACT FROM AUTHOR]

The present study investigates the entrapment of terbinafine hydrochloride (TH) in ethosomal vesicles via unsonicated and sonication method. Carbopol 934P was incorporated in the best formulation, F6, obtained by sonication method. The formulated ethosomal gel obtained as such i.e. F6 ∗ was exploited to achieve a zero order release profile of TH. The composition includes phospholipid, ethanol and propylene glycol. Drug entrapment efficiency (DEE), in-vitro and ex-vivo drug diffusion studies, FT-IR and stability studies of the prepared ethosomes were investigated. The size and shape of F6 ethosomes vesicles were characterized by SEM. In-vitro drug release studies were performed using sigma dialysis membrane in phosphate buffer, pH 7.4 for 12 h while drug content was determined by HPLC. DEE was ranked from 55.33 ± 1.32% to 69.11 ± 2.11%. Highest DEE was seen with F6 ethosomal formulation with a vesicle size of 248 ± 1.02 nm. FT-IR studies confirmed that there was no chemical interaction between drug and excipients used in the formulation. Ex-vivo result suggested that drug diffusion observed after 12 h from F6 ∗ and marketed cream (MR) formulations was 74.01 ± 0.62% and 61.45 ± 0.86%, respectively. The results of similarity factor ( f 2 values) for MR and F6 ∗ ethosomal gel were 85.14 and 42.63, respectively. It revealed that F6 ∗ showed dissimilar dissolution profiles. Transdermal flux value for F6 ∗ and MR was found to be 144.61 ± 1.28 μg/cm 2 /h and 121.6 ± 1.16 μg/cm 2 /h, respectively. This study disclosed that F6 ∗ resides at targeted site for a relatively longer period of time thereby signifying the improved patient compliance. [ABSTRACT FROM AUTHOR]

We describe the scroll system as a new microparticulate structured delivery system for enhanced delivery to/across the skin. The basic components of the scroll system are non-ionic surface active of the type of alkyl polyglycol ethers and a glycol. The unique structures are preserved with addition of various ingredients such as polymers, vegetable oils, pharmaceuticals, and permeation enhancers but are dismissed when amphiphile is withdrawn. The microparticles have a unique scroll structure with multiple 'wrapping.' Besides enabling superior permeation of drugs into/across the skin, the drugs delivered by scroll systems were more effective in vitro and in vivo compared to controls. Model drugs presented high entrapment capacity in scroll systems. The systems are stable over time and are safe for skin application. In order to form, they require a small number of ingredients, simple preparation method, and are environment friendly. The scroll systems may be new potential tools in the dermal/transdermal pharmaceutical and cosmetic industry. [ABSTRACT FROM AUTHOR]

Context: Terbinafine hydrochloride is an antifungal drug for onychomycosis. Poor permeability of its external preparation leads to poor curative effect. Transfersomes, also known as flexible liposome, could improve transmission of drug for local external use. Terbinafine hydrochloride-loaded liposome is expected to become a breakthrough on the treatment of onychomycosis. Objective: This study is aimed to prepare high skin penetration terbinafine hydrochloride transfersomes with high encapsulation efficiency, appropriate drug loading and good stability. Materials and methods: Taking entrapment efficiency as the main indicator, the formulations and the processes of preparation were investigated. Transfersomes with different surfactants were prepared in the optimization processes, and the formulations were optimized through the transdermal testin vitro. As a result, a gel contained transfersomes was obtained with a brief evaluation. Its pharmacokinetic properties of going through the skin were studied by using the micro dialysis technology and liquid chromatography-mass spectrometry to assay the penetration behavior of terbinafine. Results: Mean particle size of the terbinafine hydrochloride transfersomes was 69.6 ± 1.23 nm, and the entrapment efficiency was 95.4% ± 0.51. The content of the gel was 4.45 ± 0.15 mg/g. The accumulated permeation of the transfersomes gel in 12 h was 88.52 ± 4.06 µg cm−2and the intracutaneous drug detention was 94.38 ± 5.26 µg cm–2. The results of pharmacokinetic studies showed theCmaxand area under the curve (AUC) were apparently higher than the commercial cream. Discussion and conclusion: The terbinafine hydrochloride transfersomes was highly absorbed by the skin. The absorption rate was significantly higher than that of the commercial cream either in the transdermal testin vitroor in the pharmacokinetic studiesin vivo. [ABSTRACT FROM PUBLISHER]

The purpose of this study was to prepare hydrogels and microemulsion (ME)-based gel formulations containing 1% terbinafine hydrochloride (TER-HCL) and to evaluate the use of these formulations for the antifungal treatment of fungal infections. Three different hydrogel formulations were prepared using chitosan, Carbopol® 974 and Natrosol® 250 polymers. A pseudo-ternary phase diagram was constructed, and starting from ME formulation, a ME gel form containing 1% Carbopol 974 was prepared. We also examined the characteristic properties of the prepared hyrogels. The physical stability of hydrogels and the ME -based gels were evaluated after storage at different temperatures for a period of 3 months. The release of TER-HCL from the gels and the commercial product (Lamisil®) was carried out by using a standard dialysis membrane in phosphate buffer (pH 5.2) at 32 °C. The results of the in vitro release study showed that the Natrosol gel released the highest amount of drug, followed by Carbopol gel, chitosan gel, commercial product, and the microoemulsion-based gel in that order. In vitro examination of antifungal activity revealed that all the prepared and commercial products were effective against Candida parapsilosis, Penicillium, Aspergillus niger and Microsporum. These results indicate that the Natrosol®-based hydrogel is a good candidate for the topical delivery of TER-HCL. [ABSTRACT FROM AUTHOR]