Search

Highlights: [•] For the first time the temperature fields across the Venturi section were obtained. [•] The temperature dynamics was observed for the first time. [•] The theory of the thermal delay is valid. [ABSTRACT FROM AUTHOR]

Highlights: [•] A novel rotation generator of hydrodynamic cavitation is presented. [•] Hydrodynamic cavitation has a good potential for efficient removal of pharmaceuticals. [•] Temperature and addition of hydrogen peroxide are important by removal process. [Copyright &y& Elsevier]

• The re-entrant jet induced cloud shedding is confirmed in hot water. • Whole stages of the cavity clouds developing and collapsing are presented. • Shedding dynamics of cavitation over a wide tempetature range are identified. • The thermal transition and increase-decrease trend of cavity length are analyzed. The effects of temperature on hydraulic cavitation dynamics are investigated under various operating conditions, in a close loop cavitation tunnel with a small-scale venturi type section. A systematic study is performed with temperatures varying between 24°C and 85°C, using a high-speed visualization system to observe the cavitating flow. The image processing methods provided in the paper present a quantitative comparison of the cavitation dynamics and structure development. The results show that the increase of the fluid temperature induces the growth of the cavitation volume up to about 55°C, thereafter an additional increase in temperature has the opposite effect. This evolution is interpreted as a competition between a Reynolds effect and the well-known thermal effect. Cavitation is more closely investigated within the temperature range 50°C - 65°C, to analyze the changes in the structure and the cavitation dynamics. For the prediction of thermal suppression head, the thermal effect parameter Σ which can be used empirically, is derived at the maximum cavitation length. This fluid thermodynamic parameter Σ(T trans) at the transition peak can be referred to to avoid the maximum cavitation aggressiveness induced vibration or erosion for thermos-fluids around the thermal transition temperature. Finally, the factors influencing cavitation length and shedding frequency are presented and analyzed. [ABSTRACT FROM AUTHOR]

Venturi-type cavitation reactors still appear as the most promising candidates for industrial-scale production due to their cheapness and ease of construction, scaling, and replicability. The effects of temperature on hydrodynamic cavitating flows in a Venturi section are investigated to find the optimum reacting conditions enhancing cavitating treatment intensity. The flow conditions are varied with 4 different flow rates and a wide range of temperatures between 28 ℃ to 63 ℃. Results show that both the cavitation length and the transition between sheet and cloud cavitation regimes are influenced by a combination of the pressure drop (indicated by the cavitation number σ), the inertial/viscous effects (controlled by the Reynolds number Re), and the thermal effect (indicated by the thermodynamic parameter Σ). As the temperature is elevated, both the cavitation length and thickness increase first, and then decrease. The cavitation intensity peaks at a transition temperature of 58 ℃. With the increase of cavitation length and thickness, the regimes tend to switch earlier from the attached sheet cavity to periodical cloud shedding, and the shedding frequency decreases accordingly. When the temperature is progressively increased, the changing of cavitating flow structures is illustrated through Proper Order Decomposition analysis. This study allows us to understand the instability, size evolution, shedding regime transition of partial cavities considering thermodynamic effects. Recommendations are provided to beer-brewing, biodiesel production, or water treatment industries that working under a 55 ℃ to 60 ℃ temperature range will attain the highest cavitation intensity. • Temperature, Reynolds number and cavitation number affect HC performance. • The increase–decrease trend of cavity length is confirmed and analyzed. • POD method is developed to distinguish sheet cavitation and cloud cavitation. • Cavitation intensity peaks and shedding regimes transition happens at 58 °C. [ABSTRACT FROM AUTHOR]