Search

Most of the research works that aim at explaining the relationships between tectonic and volcanism focused a single volcano or eruption. Conversely, this study investigated offshore and onshore areas of the Campania margin in terms of stratigraphy, tectonics, and volcanism at a regional scale. We documented and reconstructed the three-dimensional geometry of several buried volcanoes and volcaniclastic deposits and recognized a complex Late Quaternary tectonic evolution of the region. These results suggest a strict genetic link between rifting and volcanic activity in terms of space-time evolution and because high volumes of magma rose to the surface through regional faults.

In the Central Mediterranean the Africa-Eurasia convergence led to the development of complex orogenic systems and backarc basins. Throughout Pliocene-Quaternary times the Southern Apennines accretionary prism migrated towards the Apulia foreland and, contemporaneously, the Tyrrhenian Sea backarc basin opened. In this study, we investigated the offshore of the southern Apulia foreland and the Southern Apennines. Using seismic reflection profiles and well data in a dedicated GIS software, we made a detailed stratigraphic analysis, reconstructed the structural pattern and built 2D geological models of the main geological surfaces. The structure of the Apulia region formed during two main tectonic stages: lower Pleistocene complex extensional faulting developed in a transtensional regime and middle-upper Pleistocene transpression/shortening. The Southern Apennines accretionary prism developed through the Pliocene-early lower Pleistocene and was overprinted by late lower Pleistocene-middle Pleistocene NW-SE sinistral faults. Through linking new data from the accretionary prism and the foreland with previous information from the Tyrrhenian Sea back-arc, we provide an original interpretation for the relationships between the various provinces that make the Central Mediterranean crustal puzzle and reconstruct the main phases of the evolution of its Pliocene-Quaternary orogenic cycle. We recognized collisional stages of uncoupled plates, followed by late lower-middle Pleistocene post-collisional stages of coupled continental plates. This Pleistocene plates re-organization of Central Mediterranean was probably due to the rupture of the Apulia/Ionian slab or to NNW intraplate shortening transmitted from Africa.

Miocene extensional sedimentary basins are being increasingly recognized in Central Mediterranean. However the paleogeographic reconstruction of the Paleo-Tyrrhenian during this time span results a difficult task because the subsequent Pliocene-Quaternary backarc opening moved away these older sedimentary basins. Our study outlines principal deformation events recorded by sediments that were deposited within minor basins of the Tyrrhenian Sea region and provides constraints on the duration of these events. The interpretation of seismic profiles, wells, and outcrops data together with a review of the middle-upper Miocene successions permitted us to recognize Miocene third order depositional sequences, reconstruct the fault pattern, and furnish a detailed evolution of the sedimentary basins that preceded the Pliocene-Quaternary Tyrrhenian high stretching. Based on the stratigraphic and tectonic constraints together with the age migration of the depocenters, we reconstructed a detailed paleogeographic evolution of central Mediterranean. Sedimentary basins architecture and fault pattern indicate a system of approximately N-S oriented normal faults and approximately E-W transform faults that were active since the Late Oligocene. Two period of extensional/transtensional tectonics (late Oligocene-Lower Burdigalian and Upper Langhian-Tortonian) were interrupted by a compressional event (late Burdigalian-Lower Langhian). Tacking in account the position of the Miocene volcanic arc (Sardinia), we propose that the coeval sedimentary basins developed in the central Mediterranean as forearc extensional/transtensional basins during the progressive collision with the African plate and before the Tyrrhenian backarc opening. Unlike published late Oligocene-Tortonian reconstructions of the western-central Mediterranean realm that report a linear migration of backarc extension, our results support a geodynamic model characterized by a progressive deformation of the forearc extension in the overriding plate.

The direction of extension and the architecture of the Messinian basins of the Central Mediterranean region is a controversial issue. By combining original stratigraphic analysis of wells and seismic profiles collected offshore and onshore Calabria, we reassess the tectonic evolution that controlled the sedimentation and basement deformation during Messinian times. Three main deep sedimentary basins in the Calabria area record a Messinian succession formed by two clays/shales-dominated subunits subdivided by a halite-dominated subunit. The correlation with the worldwide recognized stratigraphic features permit to define the chronology of the stratigraphic and tectonic events. Three main rift basins that opened in a N-S direction have been recognized. On the contrary a fourth supradetachment basin opened toward the East. We found that the basin subsidence was controlled by two stages of activity of normal faults and that Messinian rift basins evolve in a deep-water environment. The overall pattern of extensional faults of the Central Mediterranean corresponds to normal faults striking parallel to the trench and normal faults striking at an oblique angle to the trench (Fig. 14). In particular in Campania and Calabria regions are present two rifts parallel to trench and an intervening rift orthogonal to the trench. We maintain that the recognized Messinian rift basins can be interpreted according to the “Double-door saloon tectonics”.

The southern Apulia foreland recorded a strong (Imax=X MCS) earthquake in 1743 and a concomitant tsunami, which struck the southeastern Salento coast. The seismo-genetic fault and the triggering factors of the tsunami are unknown. Three-dimensional interpretation of multichannel seismic profiles calibrated by wells using a GIS software enabled the recognition of the stratigraphic succession, structural framework, and submarine landslides offshore Salento. A thin Pliocene unit overlying the Mesozoic-Cenozoic substrate is covered by a Pleistocene succession separated by a Middle Pleistocene unconformity that formed during the regional uplift of Salento. The latter gave rise to the morphologic conditions for the deposition of a prograding wedge off the Salento coast, with a shelf break located at 150 m depth. Normal faults, mainly oriented NW-SE, displaced the early Lower Pleistocene succession and are buried by younger deposits. Since the Middle Pleistocene, a compressional event gave rise to the Apulia uplift and large folds and basement-involved reverse faults that are active in the eastern part of Apulia. A huge (58 km(3)) slump affecting the Middle Pleistocene prograding wedge has been documented offshore the southeast coast of Salento. The proposed geological scenario of the 1743 earthquake and subsequent tsunami is (1) an initial strong earthquake (Imax=X MCS) associated with a thrust fault located in the eastern sector of the Apulia offshore, (2) a shacking-induced large-volume slump offshore Otranto, and (3) landslide-triggered tsunamis that struck the Salento coast.

The Southern Tyrrhenian Sea is an extensional basins linked to the Neogene evolution of the Calabria subduction zone located in the western Mediterranean realm where controversial kinematic and geodynamical models have been proposed. Our study provides a key to unravel timing and mode of extension of the upper plate and the breakup of Calabria from Sardinia. By combining original stratigraphic analysis of wells and seismic profiles off Calabria with a stratigraphic correlation to onshore outcrops, we re-assess the tectonic evolution that controlled the sedimentation and basement deformation of the Southern Tyrrhenian basin during Serravallian–Tortonian times. We document the tectono-stratigraphic evolution of adjacent extensional basins characterized by 3rd order depositional sequences (Ser1, Tor1 and Tor2) and different modes of extension, subsidence and opposite dipping faults. Episodic basin development is recorded by a coarsening-up and fining-up trend of the sedimentary succession and by tectonically enhanced unconformities that reflect three episodes of fault activity. We reconstruct Serravallian–Tortonian paleogeographic maps and propose a block faulting model for the evolution of the Sardinia–Calabria area. Sardinia was disconnected from Calabria through N–S normal faults forming Tyrrhenian extensional basins that formed contemporaneously to the E–W opening of the Algerian basin. Unlike published Serravallian–Tortonian reconstructions of the western Mediterranean realm, our results support a geodynamic model characterized by rapid trench retreat, trench-normal extension in the entire overriding plate and very weak coupling between plates.

Three crustal geological sections of the Campanian Volcanic Zone (Italy) were reconstructed by integrating basin architecture and deep well stratigraphies. In addition, mapping of the fault system and of large-volume ignimbrites was carried out. A linked fault system has been identified, which was responsible for asymmetric subsidence contemporaneous with the eruption of ignimbrites. Late Quaternary extension is characterized by a WNW–ESE stretching axis, NNE–SSW normal faults and reactivation of inherited structures. Structural, stratigraphic and palaeogeographical analyses reveal evidence for up to 750 m of subsidence, which has occurred at a mean rate of up to 4.9 mm a −1 over the past 154 ka. These rates suggest that extensional tectonics was responsible for the regional subsidence. A 6 km deep seismic reflector was associated with a magmatic reservoir underlying Campi Flegrei. By matching the structural and stratigraphic architecture with published geophysical and geochemical data a crustal tectonomagmatic model was constructed that displays high-angle faults that root into a low-angle detachment, which in turn roots into a deep sill-like magma reservoir. This model suggests the possible role of extensional faults in localizing magmatic activity, as faults controlled magma rise from deep to shallow reservoirs and to the surface during ignimbrite eruptions. Supplementary material: Seismic reflection profiles and interpretations are available at http://www.geolsoc.org.uk/SUP18451.

We use seismic reflection profiles of diverse resolutions integrated with high resolution bathymetry and calibrated by deep wells, piston cores and field data to derive a structural and stratigraphic interpretation of the Southeastern peri-Tyrrhenian Basins. The study area is located in the Southeastern Tyrrhenian Sea offshore Calabria. We document a tectono-stratigraphic evolution of the sedimentary basins from the Serravallian to the Present. The basins formation started during the Serravallian and the area was successively affected by E–W normal faulting and approximately N–S transfer faults in the Messinian–Lower Pleistocene time range. During the Lower Pleistocene the tectonic depressions, completely filled with sediments, were affected by folding associated with transcurrent tectonics along a NW-trending left lateral fault. Finally, during the Middle Pleistocene, a change in the slip direction produced minor pull-apart basins that overprinted the folds. The basin analysis revealed the stratigraphic signature of the tectonic events and, the uplifting and subsiding areas and the direction from which sediments arrive into the tectonic depression. The four-dimensional geologic reconstruction of the Margin of Calabria furnished new constrains for the kinematic evolution of the Southeastern peri-Tyrrhenian Basins. We suggest that the superposition of different structural styles reflects a variation of the relative velocity between the Southern Apennine Arc and the Calabria Arc during the formation of the Apennine Thrust Belt.

¶The crustal structure of the Campania continental margin is synthesized from outcrop, seismic reflection and gravimetric data. Outcrop and subsurface geological data reveal the presence of NE–SW faults, E–W faults and NW–SE faults. An older extensional event occurred along NW–SE faults and was followed by the main extensional event linked to the activity of NE–SW normal faults. The latter were active between 700 and 400 ka producing half-grabens filled by more than 5 km of Quaternary deposits. The stratigraphic signature of these tectonic events corresponds to a Lower Pleistocene marine unconformity-bounded unit overlain by Middle Pleistocene rocks belonging to a transgressive-regressive cycle. A crustal section of the Campania margin displays an asymmetric linked fault system characterized by a 10–12 km-deep main detachment level, listric normal faults and rollover anticlines. Structural and stratigraphic data document that the inception of volcanic activity at Vesuvius occurred at 400 ka, just after the main extensional event, and the volcano is located at the margin of a rollover anticline.

¶The Campanian continental margin is characterised by asymmetric half grabens and large-volume volcanic deposits. Vesuvius and Campi Flegrei are active volcanoes located along the coast of Naples Bay along one of these half grabens. The interpretation of an extensive set of seismic reflection data allowed to reconstruct the stratigraphy and structural pattern in Naples Bay and their relationships with volcanism. The stratigraphic succession is characterised by a complex architecture due to the presence of 157 Ka old submarine and subaerial vents, pyroclastic flow units associated to the Campanian Ignimbrite and the Neapolitan Yellow Tuff, and numerous tuff cones younger than 12 Ka. These volcanic units occur within marine sediments deposited during the late Quaternary sea level oscillations. The structural pattern is characterised by late Quaternary NE- trending normal faults, NW-trending transtensional faults, E–W trending left-lateral faults and WNW-ESE directed folds. The overall fault kinematics and the evaluated very high displacement rates are consistent with an E-trending left-lateral transtensional shear zone located between 41° and 40° N latitude. The relationship between volcanism and tectonics in the Bay of Naples is explained with block rotation associated with this shear zone. Finally, tectonic and stratigraphic data argue against the occurrence of a caldera in the Bay of Naples.

Pozzuoli Bay is located in the eastern Tyrrhenian Sea and is an area characterized by active tectonics and volcanism. On the basis of high-resolution seismic reflection profiles, it was possible to reconstruct the stratigraphy and three-dimensional stratal architecture of the Holocene succession. Two volcanic units and three sedimentary ones were recognized. The basal unit NC consists of volcanic deposits and dates at 10.0–8.0 ka B.P. It is followed by unit D, deposited between 8.0 and 5.5 ka B.P., which displays a backstepping configuration in the central area and a forestepping configuration in the northern area. Unit D is covered by the progradational unit B which is elongated in a SE-NW direction. Unit C is interbedded between unit B and is interpreted as the volcanic products of the Agnano-Monte Spina eruption which occurred 4.4 B.P. Unit A, the youngest unit, shows a progradational configuration and is elongated in a E-W direction. The sedimentary units record the transgressive and highstand of the eustatic sea level. They show vertical and lateral variations in the depositional architecture. Changes in the stacking pattern record variations in tectonic subsidence and hydrodynamic regimes.

The detailed stratigraphic analysis of synkinematic stratal architectures permits the calculation of fold uplift rates and the reconstruction of fold kinematics. This approach was applied to active folds in the Bay of Pozzuoli, eastern Tyrrhenian Sea. This area features late Quaternary volcanism, shallow magmatic intrusions, and transtensional tectonics. Seismostratigraphic analysis of synkinematic strata is constrained by a physical correlation to an already established stratigraphic succession in the neighboring Campi Flegrei and by tephra layers in a gravity core located in Pozzuoli Bay. A stratigraphic resolution in thousands of years was established. Structural and stratigraphic analyses yield quantitative data on the timing of fold inception, kinematics, and the amount and rates of uplift. The folds extend over ∼2 km, and display a curved axial pattern and wedge-shaped packages of synkinematic strata. The rate of fold uplift ranges from 1 to 20 mm/yr. The structures feature limb rotation kinematics and decreasing uplift rates. The uplift rates and geometry of the Pozzuoli Bay folds suggest that they are of tectonic origin and are a product of detachment folding. Their limited longitudinal extent and arcuate axial trends are compatible with an east-trending left transtensional shear zone that was active along the eastern Tyrrhenian Sea during the late Quaternary. A relative sea-level curve was calculated for an anticline culminating in the city of Pozzuoli. This relative sea-level curve highlights the relationship between the deformation timing and the genesis of related abrupt changes in sedimentary facies and erosional surfaces.

The structural and stratigraphic interpretation of high-resolution seismic reflection profiles permitted the reconstruction of the tectonics and basin architecture of the Bay of Naples from shelf-slope to deep basin areas. The Bay of Naples half-graben experienced extensional tectonics related to the activity of NE-trending normal faults during the Middle Pleistocene. The half-graben displays asymmetric and multiple fault segments linked by relay zones. The basin infill is made up, from old to young, of an unconformity-bounded unit and seven fourth-order depositional sequences. The oldest unit marks incipient fault activity. Increases of the fault slip rates gave rise to the formation of a tectonically-enhanced unconformity on the shelf and coeval thick debris flows in the deep basin. In the shelf-slope area the fourth-order depositional sequences form a trangressive–regressive cycle. The transgressive trend is linked to fault activity, whereas the regressive trend recorded tectonic stability.

Vesuvius is an active volcano that has been affected by late Quaternary lateral collapses and tectonic faults. Cryptodomes and two debris avalanche, 18. ka-old DA1 and 3.5. ka-old DA2, were previously documented off Vesuvius and for the younger avalanche a link between onshore and offshore stratigraphy was reconstructed. The interpretation of seismic reflection profiles off Vesuvius, borehole stratigraphies, onshore and geomorphological data allowed to recognise the relationships among debris avalanches, criptodomes and faulting.Stratigraphic data reveal a remarkable difference between the architecture of the northern and southern volcano sectors that is compatible with the occurrence of the DA1 debris avalanche in the southern volcano sector. A contour map and a three-dimensional model of a surface merging the morphology of the top of the Somma lavas, in the northern volcano sector, with that of the top of the DA1 debris avalanche, in the southern volcano sector, were reconstructed. We present a new lateral collapse model of Vesuvius Volcano and document the relevance of inherited tectonic faults in guiding collapse geometry. It is possible that the SW-directed collapse (DA1) was driven towards the hangingwall blocks of NW-SE normal faults, while the propagation of the W-directed collapse (DA2) can be ascribed to the activity of the E-W strike-slip fault. Because of their distal location a minor role of cryptodome intrusion on collapses of Vesuvius can be postulated. The detailed analysis of substrate and edifice structure presented here establishes clear connexion between substrate tectonics and lateral collapse. This approach broadens the horizons of volcanic hazard assessment of Vesuvius. © 2011 Elsevier B.V.

In this paper, we present an interdisciplinary study of the Upper Pleistocene ignimbrites of the Campanian margin in the Neapolitan area performed using outcrops, cores and seismic reflection data. We established a physical correlation between onshore and offshore stratigraphic units and reconstructed three regional geological sections. The stratigraphic succession in Naples is formed, from older to younger, by: Middle Pleistocene marine sediments; ancient ignimbrites reaching a maximum thickness of 200 m; 100–150 m thick tuffs of the 39 ka-old Campanian Ignimbrite; and products of 15 ka-old Neapolitan Yellow Tuff. The whole ignimbrite succession is thicker in Naples city and thins progressively towards the Bay of Naples, thus suggesting that some of the vents of these ignimbrites were possibly located near the city of Naples. NW-SE and NE-SW normal faults were rectognized in the Neapolitan area. In particular, NW-SE trending normal faults displace both the pre-CI tuffs and the Campanian Ignimbrite downthrowing the blocks towards the Bay of Naples in the order of hundreds of metres and feature ignimbrite thicknesses that are higher in the footwall than in the hangingwall blocks, whereas NE-SW normal faults formed after the Neapolitan Yellow Tuff eruption. In conclusion, the key result of our work is that NW-SE volcano tectonic normal faults were active during the Upper Pleistocene when ignimbrites were emplaced in the Neapolitan area in conforming with a model of fissure emission related to regional fault systems.