Search

To obtain quantitative estimates of the physical workload in epidemiological and intervention studies of musculoskeletal disorders, there is a need to extend task based exposure data to job exposure profiles. For this purpose a work task diary was developed and evaluated. This was validated against direct observations of a day's work for twenty-two female office workers and twenty female hospital cleaners. There was a good agreement regarding the occurrence of the main tasks. However, the less time-consuming tasks were under-reported. Moreover, about two thirds of the changes between tasks were not reported. The difficulties of defining tasks that function as occupational entities seems to be a major reason for the lack of agreement. The underestimation of the duration of breaks/pauses was most pronounced for the cleaners. Still, the diary would be useful for the calculation of job exposure, by time-weighting task exposure data, when the tasks and/or their duration vary between days.

This study compares questionnaire assessed physical activity with direct technical measurements among cleaners and office workers, stratified regarding age, gender and self-reported neck/shoulder complaints. During two full working days number of steps was recorded by a pedometer, sitting/standing positions by a posimeter and heart rate by a Sport-Tester. In addition the subjects kept a work task diary for 10 days. There were high intra-individual variations in exposure between the days. Subjects with complaints rated their exposure higher than those without, although they in fact showed lower direct measured exposure. This may imply underestimation of exposure-effect relationships. Rate of perceived exertion showed low correlation with heart rate ratio within the two occupational groups, but high, 0.64 when the two groups were combined. Age and complaints explained 31% of the variance for the cleaners.

The aim of this study was to investigate the possible associations between working technique, sex, symptoms and level of physical load in VDU-work. A study group of 32 employees in the editing department of a daily newspaper answered a questionnaire, about physical working conditions and symptoms from the neck and the upper extremities. Muscular load, wrist positions and computer mouse forces were measured. Working technique was assessed from an observation protocol for computer work. In addition ratings of perceived exertion and overall comfort were collected. The results showed that subjects classified as having a good working technique worked with less muscular load in the forearm (extensor carpi ulnaris p=0.03) and in the trapezius muscle on the mouse operating side (p=0.02) compared to subjects classified as having a poor working technique. Moreover there were no differences in gap frequency (number of episodes when muscle activity is below 2.5% of a reference contraction) or muscular rest (total duration of gaps) between the two working technique groups. Women in this study used more force (mean force p=0.006, peak force p=0.02) expressed as % MVC than the men when operating the computer mouse. No major differences were shown in muscular load, wrist postures, perceived exertion or perceived comfort between men and women or between cases and symptom free subjects. In conclusion a good working technique was associated with reduced muscular load in the forearm muscles and in the trapezius muscle on the mouse operating side. Moreover women used more force (mean force and peak force) than men when operating the click button (left button) of the computer mouse.

Industrial interventions that focus on increased productivity may impair the ergonomics, on a workstation or individual level. This paper presents a method that characterises work time consumption and physical work load of manual work, using video recordings synchronised with physiological measurements of, e.g. muscular activity, and postures. The underlying idea was that it is possible to amalgamate technical and human aspects resulting in a synergetic evaluation. The method was developed through two case studies within the Swedish automotive industry, where manual materials handling was studied. A methodological result was that the synchronising procedure was sufficiently precise to allow work activities to be assigned significantly different levels of physical work load. These different levels may be used to predict physical work load in the design and change of production systems. It was concluded that the method is accurate enough to be a useful tool in industrial interventions.

Objectives: This study compares questionnaire-assessed exposure data on work postures and movements with direct technical measurements., Methods: Inclinometers and goniometers were used to make full workday measurements of 41 office workers and 41 cleaners, stratified for such factors as musculoskeletal complaints. The subjects answered a questionnaire on work postures of the head, back, and upper arms and repeated movements of the arms and hands (3-point scales). The questionnaire had been developed on the basis of a previously validated one. For assessing worktasks and their durations, the subjects kept a 2-week worktask diary. Job exposure was individually calculated by time-weighting the task exposure measurements according to the diary., Results: The agreement between the self-assessed and measured postures and movements was low (kappa = 0.06 for the mean within the occupational groups and kappa = 0.27 for the whole group). Cleaners had a higher measured workload than office workers giving the same questionnaire response. Moreover, the subjects with neck-shoulder complaints rated their exposure to movements as higher than those without complaints but with the same measured mechanical exposure. In addition, these subjects also showed a general tendency to rate their postural exposure as higher. The women rated their exposure higher than the men did., Conclusions: The questionnaire-assessed exposure data had low validity. For the various response categories the measured exposure depended on occupation. Furthermore, there was a differential misclassification due to musculoskeletal complaints and gender. Thus it seems difficult to construct valid questionnaires on mechanical exposure for establishing generic exposure-response relations in epidemiologic studies, especially cross-sectional ones. Direct technical measurements may be preferable.

The aim of the study was to quantify the workload on the upper extremity for fundamental work tasks during machine milking. Eleven milkers working in a loose-housing system with a milking parlour participated in the study. Muscle activity for the biceps and the forearm flexors, as well as positions and movements of the wrists were simultaneously measured by electromyography and electrogoniometry while video-recording the work. The milking work was broken up in three main tasks "Drying (the cow's udder)", "Pre-milking (the first milk)" and "Attaching (the milking unit to the udder)" and three supplementary tasks. All three main tasks show high muscle load values and almost no time for rest. The highest load values for the biceps and flexor muscles were found during the tasks "Attaching, holding the milking unit" and "Drying", respectively. For 10% of the recording time, the milkers held active hands in 42 degrees dorsal flexion during the milking tasks "Pre-milking" and "Attaching" and in deviated positions exceeding 50% of their maximum values during "Attaching" and "Drying". The high muscle loads in combination with extreme positions and movements of the hand and forearm might contribute to the development of injuries among milkers. The result from the study aims to form a basis for technical improvements of the milking equipment to decrease the risk for arm wrist and hand disorders.

High prevalence of hand and wrist symptoms has been found in females working with machine milking. Therefore the aim of this study was to quantify the positions and movements of the wrist during machine milking, and to compare tethering and loose-housing systems with respect to this. Biaxial electrogoniometers and data loggers were used for recording flexion and deviation angles of both the right and left wrists in 11 healthy milkers. For each individual 25 min of representative work was recorded in each system. High values of dorsiflexion and radial deviation were found, which might induce an increased risk of carpal tunnel syndrome. Moreover, the velocity and repetitiveness were close to those values described in repetitive work with a high risk of elbow and hand disorders in the fish-processing industry and giro-form data entry work. According to our findings, the load on the upper extremities has increased with respect to dorsiflexed hand position and repetitiveness when milking in the modern loose-housing milking system. This is probably due to the change of the working position and/or the higher productivity (number of cows that milked per time unit) in the loose-housing system as compared to the old-fashioned tethering system. These negative effects on wrist positions and movements should be considered when building new milking systems.

Objectives: This study analyzed the variation in physical work load among subjects performing an identical work task., Methods: Electromyographs from the trapezius and infraspinatus muscles and wrist movements were recorded bilaterally from 49 women during a highly repetitive industrial work task. An interview and a physical examination were used to define 12 potential explanatory factors, namely, age, anthropometric measures, muscle strength, work stress, and musculoskeletal disorders., Results: For the electromyographs, the means of the 10th percentiles were 2.2% and 2.8% of the maximal voluntary electrical activity (%MVE) for the trapezius and infraspinatus muscles, respectively. However, the interindividual variations were very large [coefficients of variation (CV) 0.75 and 0.62, respectively]. Most of the variance could not be explained; only height, strength, and coactivation of the 2 muscles contributed significantly (R2(adj)0.20-0.52). The variation was still large, though smaller (CV < or =0.63), for values normalized to relative voluntary electrical activity (RVE). For the wrist movements, the median velocity was 29 degrees per second, and the interindividual variations were small (CV < or =0.24). Six factors contributed to the explained variance (R2(adj)0.12-0.55)., Conclusions: The interindividual variation is small for wrist movements when the same work tasks are performed. In contrast, the electromyographic variation is large, even though less after RVE normalization, which reduces the influence of strength, than when MVE is used. Because of these variations, several electromyographs are needed to characterize the exposure of a specific work task in terms of muscular load, and individual electromyographs are preferable when the worker' s risk of myalgia is being studied.