Search

Hybrid cements combine clinker with large amount of supplementary cementitious materials while utilizing hydration and alkali activation processes. This paper summarizes shrinkage and creep properties of industrially produced H-cement, containing only 20% of Portland clinker. In comparison with a reference cement CEM II/B-S 32.5 R, autogenous shrinkage is smaller after 7 days, and drying shrinkage is similar at similar times. A different capillary system of H-cement leads to faster water mass loss during drying. Basic and total creep of concrete remains in the standard deviation of B4 and EC2 creep models. The results demonstrate that shrinkage and creep properties of concrete made from H-cement have similar behavior as conventional structural concrete or high-volume fly ash concrete.

The presented research focuses on the behavior of predried concrete beams with 2.5 m span subjected to cycles of nonsymmetric wetting and drying. Wetting is induced by partially immersing the specimens in a water basin. The submerged portion of the specimens was relatively low (1/5 to 1/10 of their height) leading to a highly nonuniform and nonsymmetric distribution of eigenstrains due to concrete swelling. Unlike conventional experiments on the volume changes of concrete, the measured quantity is not the axial deformation but the vertical displacement instead. This paper presents the experimental data obtained within two wetting and drying cycles, running over 1 year.

The creep and shrinkage of concrete play important roles for many nuclear power plant (NPP) and engineering structures. This paper benchmarks the standard and micromechanical models using a revamped and appended Northwestern University database of laboratory creep and shrinkage data with 4663 data sets. The benchmarking takes into account relevant concretes and conditions for NPPs using 781 plausible data sets and 1417 problematic data sets, which cover together 47% of the experimental data sets in the database. The B3, B4, and EC2 models were compared using the coefficient of variation of error (CoV) adjusted for the same significance for short-term and long-term measurements. The B4 model shows the lowest variations for autogenous shrinkage and basic and total creep, while the EC2 model performs slightly better for drying and total shrinkage. In addition, confidence levels at 5, 10, 90, and 95% are quantified in every decade. Two micromechanical models, Vi(CA)2T and SCK CEN, use continuum micromechanics for the mean field homogenization and thermodynamics of the water–pore structure interaction. Validations are carried out for the 28-day Young’s modulus of concrete, basic creep compliance, and drying shrinkage of paste and concrete. The Vi(CA)2T model is the second best model for the 28-day Young’s modulus and the basic creep problematic data sets. The SCK CEN micromechanical model provides good prediction for drying shrinkage.

The magnitude and time evolution of shrinkage are influenced by numerous factors which are implemented in the design codes often in a different way. The time-dependent behavior of concrete in structures sensitive to creep and shrinkage should be verified by means of short-term laboratory measurements. Extrapolation of drying shrinkage from short-term measurements is an illposed problem. The process is extremely slow but can be accelerated by reducing the specimen size. The knowledge of the size-effect on drying shrinkage is a necessity to establish the transition from the laboratory to the structural size. In the literature, the experimental data on such size-effect are insufficient. For this reason a new experiment was developed to study this phenomenon on small-scale specimens made of cement mortar and the results from the first year are summarized in this paper. The measured data are validated by coupled FEM hygro-mechanical simulations.

The design and behavior of creep-sensitive structures can be to a large extent dependent on the evolution of drying shrinkage. Drying shrinkage of concrete measured on standard laboratory specimens is very time demanding, furthermore, the extrapolation based on the short-term measurements is an ill-posed problem and can lead to large errors. Additionally, the final magnitude of shrinkage is size-dependent which makes the transition from the laboratory data to real structure even more challenging. The present paper evaluates this size effect based on the data gathered in the Creep and shrinkage database developed at the Northwestern university and the data from the literature. Finally, this size effect is compared against the current codes of practice and recommendations.

The aim of this paper is to show and compare the time evolution of drying shrinkage and drying creep in concrete from three different perspectives. The first one analyzes the basic equations defined in the most common design codes and prediction models for the description of the long-term behavior of concrete (ACI 209, EC2, Model Code 2010, B3, B4). Next, the evolution of drying creep and shrinkage is examined by processing suitable experimental data available from the database developed at the Northwestern University. Finally, the last point of view investigates the results obtained from the finite element simulations employing the material point approach, in particular, the material model based on the Microprestress-Solidification theory.