Search

Azimuth multi-channel synthetic aperture radar (SAR) has always been an important technical means to achieve high-resolution wide-swath (HRWS) SAR imaging. However, in the space-borne azimuth multi-channel SAR system, random phase noise will be produced during the operation of each channel receiver. The phase noise of each channel is superimposed on the SAR echo signal of the corresponding channel, which will cause the phase imbalance between the channels and lead to the generation of false targets. In view of the above problems, this paper proposes a random phase noise compensation method for space-borne azimuth multi-channel SAR. This method performs feature decomposition by calculating the covariance matrix of the echo signal and converts the random phase noise estimation into the optimal solution of the cost function. Considering that the phase noise in the receiver has frequency-dependent and time-varying characteristics, this method calculates the phase noise estimation value corresponding to each range-frequency point in the range direction and obtains the phase noise estimation value by expectation in the azimuth direction. The proposed random phase noise compensation method can suppress false targets well and make the radar present a well-focused SAR image. Finally, the usefulness of the suggested method is verified by simulation experiments. [ABSTRACT FROM AUTHOR]

When using ground-based synthetic aperture radar (GB-SAR) for monitoring open-pit mines, dynamic atmospheric conditions can interfere with the propagation speed of electromagnetic waves, resulting in atmospheric phase errors. These errors are particularly complex in rapidly changing weather conditions or steep terrain, significantly impacting monitoring accuracy. In such scenarios, traditional regression model-based atmospheric phase correction (APC) methods often become unsuitable. To address this issue, this paper proposes a clustering method based on the spatial autocorrelation function. First, the interferogram is uniformly divided into multiple blocks, and the phase consistency of each block is evaluated using the spatial autocorrelation function. Then, a region growing algorithm is employed to classify each block according to its phase pattern, followed by merging adjacent blocks based on statistical data. To verify the feasibility of the proposed method, both the traditional regression model-based method and the proposed method were applied to deformation monitoring of an open-pit mine in Northwest China. The experimental results show that for complex atmospheric phase scenarios, the proposed method significantly outperformed traditional methods, demonstrating its superiority. [ABSTRACT FROM AUTHOR]

In recent years, the development of neural networks has significantly advanced their application in Synthetic Aperture Radar (SAR) ship target detection for maritime traffic control and ship management. However, traditional neural network architectures are often complex and resource intensive, making them unsuitable for deployment on artificial satellites. To address this issue, this paper proposes a lightweight neural network: the Multi-Scale SAR Ship Detection Network (MSSD-Net). Initially, the MobileOne network module is employed to construct the backbone network for feature extraction from SAR images. Subsequently, a Multi-Scale Coordinate Attention (MSCA) module is designed to enhance the network's capability to process contextual information. This is followed by the integration of features across different scales using an FPN + PAN structure. Lastly, an Anchor-Free approach is utilized for the rapid detection of ship targets. To evaluate the performance of MSSD-Net, we conducted extensive experiments on the Synthetic Aperture Radar Ship Detection Dataset (SSDD) and SAR-Ship-Dataset. Our experimental results demonstrate that MSSD-Net achieves a mean average precision (mAP) of 98.02% on the SSDD while maintaining a compact model size of only 1.635 million parameters. This indicates that MSSD-Net effectively reduces model complexity without compromising its ability to achieve high accuracy in object detection tasks. [ABSTRACT FROM AUTHOR]

The space-borne synthetic aperture radar (SAR) azimuth multi-channel system has extensive applications because it can achieve high-resolution and wide-swath radar imaging. The thermal noise generated by the radar receiver of each channel during operation will cause an imbalance between channels. If the echoes of each channel are quantized with the same number of bits without considering the influence of thermal noise, false targets will appear in the imaging consequences. Considering that the thermal noise generated in the receiver will affect the quantization process of the space-borne SAR azimuth multi-channel system, a new space-borne SAR azimuth multi-channel quantization method is proposed to improve this problem. Firstly, the pure noise power of the receiver is calculated without transmitting the radar signal. The signal power is estimated by subtracting the pure noise power from the total power. Then, the average value of the radar echo signal minus k times the standard deviation is used as the left endpoint of the original data amplitude range, and the average value of the radar echo signal plus k times the standard deviation is used as the right endpoint of the original data amplitude range. The original echo data after adjusting the amplitude range is quantified. This method can effectively reduce the influence of thermal noise and random outliers in the receiver on quantization and suppress the appearance of false targets. Finally, simulation is used to confirm the viability of the suggested quantization approach. [ABSTRACT FROM AUTHOR]

As urban economies flourish and populations become increasingly concentrated, urban surface deformation has emerged as a critical factor in city planning that cannot be overlooked. Surface deformation in urban areas can lead to deformations in structural supports of infrastructure such as road bases and bridges, thereby posing a serious threat to public safety and creating significant safety hazards. Consequently, research focusing on the monitoring of urban surface deformation holds paramount importance. Interferometric synthetic aperture radar (InSAR), as an important means of earth observation, has all-day, wide-range, high-precision, etc., characteristics and is widely used in the field of surface deformation monitoring. However, traditional solitary InSAR techniques are limited in their application scenarios and computational characteristics. Additionally, the manual selection of ground control points (GCPs) is fraught with errors and uncertainties. Permanent scatterers (PS) can maintain high interferometric coherence in man-made building areas, and distributed scatterers (DS) usually show moderate coherence in areas with short vegetation; the combination of DS and PS solves the problem of manually selecting GCPs during track re-flattening and regrading, which affects the monitoring results. In this paper, 45 Sentinel-1B data from 16 February 2019 to 14 December 2021 are used as the data source in the urban area of Horqin District, Tongliao City, Inner Mongolia Autonomous Region, for example. A four-threshold (coherence coefficient threshold, FaSHPS adaptive threshold, amplitude divergence index threshold, and deformation velocity interval) GCPs point screening method for PS-DS, as well as a Small Baseline Subset-Permanent Scatterers-Distributed Scatterers-Interferometric Synthetic Aperture Radar (SBAS-PS-DS-InSAR) method for selecting PS and DS points as ground control points for orbit refinement and re-flattening, are proposed. The surface deformation results obtained using the Small Baseline Subset Interferometric Synthetic Aperture Radar (SBAS-InSAR) and the SBAS-PS-DS-InSAR proposed in this paper were comparatively analysed and verified. The maximum cumulative line-of-sight settlements were −90.78 mm and −83.68 mm, and the maximum cumulative uplifts are 74.94 mm and 97.56 mm, respectively; the maximum annual average line-of-sight settlements are −35.38 mm/y and −30.38 mm/y, and the maximum annual average uplifts are 25.27 mm/y and 27.92 mm/y. The results were evaluated and analysed in terms of correlation, mean absolute error (MAE), and root mean square error (RMSE). The deformation results of the two InSAR methods were evaluated and analysed in terms of correlation, MAE, and RMSE. The errors show that the Pearson correlation coefficients between the vertical settlement results obtained using the SBAS-PS-DS-InSAR method and the GPS monitoring results were closer to 1. The maximum MAE and RMSE were 13.7625 mm and 14.8004 mm, respectively, which are within the acceptable range; this confirms that the monitoring results of the SBAS-PS-DS-InSAR method were better than those of the original SBAS-InSAR method. SBAS-InSAR method, which is valid and reliable. The results show that the surface deformation results obtained using the SBAS-InSAR, SBAS-PS-DS-InSAR, and GPS methods have basically the same settlement locations, extents, distributions, and temporal and spatial settlement patterns. The deformation results obtained using these two InSAR methods correlate well with the GPS monitoring results, and the MAE and RMSE are within acceptable limits. By comparing the deformation information obtained using multiple methods, the surface deformation in urban areas can be better monitored and analysed, and it can also provide scientific references for urban municipal planning and disaster warning. [ABSTRACT FROM AUTHOR]

Compared to conventional radars, arc array synthetic aperture radar (SAR) enables wide-area observation under ideal conditions. However, helicopters carrying arc array SAR platforms are generally smaller in size and more sensitive to vibration, which has a greater impact on the imaging quality. In this paper, the vibration error of the arc array SAR platform is investigated, and a vibration error model of the arc array SAR platform is established. Based on the study of the vibration error model, a vibration phase estimation and compensation algorithm based on the delayed conjugate multiplication method is proposed. In the first step, distance pulse pressure processing is performed on the echo signal. In the second step, the pulse pressure signals and their delays in the same distance unit are subjected to conjugate multiplication, and the phase of the signal after conjugate multiplication is extracted. The extracted phase is then amplitude- and phase-compensated to estimate the vibration phase. In the third step, the vibration phase is compensated in the azimuthal direction of the distance pulse pressure signal, and the pairwise echo is eliminated, which completes the compensation of the airborne arc array SAR vibration platform. [ABSTRACT FROM AUTHOR]

The displaced phase center multiple azimuth beams (DPCMAB) technique can help spaceborne synthetic aperture radar (SAR) systems obtain the high-resolution wide-swath (HRWS) imaging capacity, and azimuth multichannel reconstruction is usually required due to azimuth non-uniform sampling. Compared with stationary and moving targets, the range history and azimuth signal model of the moving target with an acceleration are obviously different. The azimuth multichannel signal model of an accelerated moving target is established, and the relationship between acceleration and Doppler parameters is analyzed. Furthermore, the impact of the acceleration on azimuth multichannel reconstruction and imaging results is simulated and analyzed. According to the azimuth multichannel signal model, an azimuth multichannel reconstruction approach for accelerated moving targets is proposed. The key point of the proposed reconstruction approach is the modified azimuth multichannel matrix, which is related not only to azimuth and slant velocities but also accelerations. The target's velocities and accelerations are obtained using multiple Doppler parameter estimations. Compared with the conventional method of processing the raw data of accelerated moving targets, this proposed method could distinctly suppress image defocusing and pairs of false targets. Simulation results on point targets validate the proposed azimuth multichannel reconstruction approach. [ABSTRACT FROM AUTHOR]

Conventional squinted sliding spotlight synthetic aperture radar (SAR) imaging suffers from substantial swath width reduction and complex processing requirements due to the continuous variation in the squint angle and the large range cell migration (RCM) throughout the data acquisition interval. A novel two-dimensional (2D) beam scanning mode for high-resolution wide swath (HRWS) imaging is proposed. The key to the novel imaging mode lies in the synchronous scanning of azimuth and range beams, allowing for a broader and more flexible imaging swath with a high geometric resolution. Azimuth beam scanning from fore to aft was used to improve the azimuth resolution, while range beam scanning was adopted to illuminate the oblique wide swath to avoid the large RCM and the serious swath width reduction. Compared with the conventional sliding spotlight mode, both the swath width and swath length could be extended. According to the echo model of this imaging mode, an echo signal preprocessing approach is proposed. The key points of this approach are range data extension and azimuth data upsampling. A designed system example with a resolution of 0.5 m, swath width of 60 km, and azimuth coverage length of 134 km is presented. Furthermore, a simulation experiment on point targets was carried out. Both the presented system example and imaging results of point targets validated the proposed imaging mode. [ABSTRACT FROM AUTHOR]

To tackle the problems of Doppler spectrum, aliasing caused by azimuth beam scanning and azimuthal serious non-uniform sampling in squint sliding spotlight synthetic aperture radar (SAR) with varying repetition frequency technology, the azimuth sampling method of sub-aperture block-varying pulse repetition frequency (SBV-PRF) is proposed, where the sub-aperture division judgement makes the azimuth acquisition time of each sub-block small enough so that the Doppler bandwidth caused by the Doppler center change can be ignored. Based on the echo signal characteristics of a SBV-PRF transmission scheme, an azimuth pre-processing method combining SBV-PRF transmission scheme with sub-aperture division is proposed. Using this method, de-skewing is first performed on each set of sub-aperture data to eliminate the additional Doppler bandwidth introduced by the squint angle, and then the azimuth signal resampling is performed to ensure different sub-aperture data have the same sampling rate. The SBV-PRF technology reduces the difficulty of azimuth signal pre-processing while ensuring the complete acquisition of the complete echo data of the squint sliding spotlight mode. The effectiveness of the SBV-PRF system design and the signal processing method is verified by the point target echo simulation and imaging simulation results. [ABSTRACT FROM AUTHOR]

Digital beamforming with null steering in elevation can be used to separate echoes corresponding to different sub-pulses, but the pulse extension loss will decrease performance on echo separation. To resolve this problem, an improved null steering beamformer based on multi-group time delays is proposed. In the proposed beamformer, the phase weighting matrix is multiplied and the multi-group time delays are used to improve the coherence between echoes from different channels. Then, the modified phase weighing matrix for null steering is introduced to further improve the capacity of echo separation. Compared with the conventional null steering beamformer, the multi-group time delays can provide the more accurate time delay compensation for better echo separation. Simulation results on both point and distributed targets validate the proposed beamformer. [ABSTRACT FROM AUTHOR]

An arc array synthetic aperture radar (AA-SAR) is a new type of omnidirectional observation and imaging system. Based on linear array 3D imaging, this paper introduces a keystone algorithm combined with the arc array SAR 2D imaging method and proposes a modified 3D imaging algorithm based on keystone transformation. The first step is to discuss the target azimuth angle, retain the far-field approximation method of the first-order term, analyze the influence of the forward motion of the platform on the along-track position, and realize the two-dimensional focusing of the target slant range–azimuth direction. The second step is to redefine a new azimuth angle variable in the slant-range along-track imaging and use the keystone-based processing algorithm in the range frequency domain to eliminate the coupling term generated by the array angle and the slant-range time. The corrected data are used to perform along-track pulse compression to obtain the focused image of the target and realize the three-dimensional imaging of the target. Finally, in this article, the spatial resolution of the AA-SAR system in the forward-looking state is analyzed in detail, and the change in the spatial resolution of the system and the effectiveness of the algorithm are verified through simulation. [ABSTRACT FROM AUTHOR]

The block varying pulse repetition frequency (BV-PRF) scheme applied to spaceborne squint sliding-spotlight synthetic aperture radar (SAR) can resolve large-range cell migration (RCM) and reduce azimuth signal non-uniformity. However, in the BV-PRF scheme, different raw data blocks have different PRFs, and the raw data in each block are insufficiently sampled. To resolve the two problems, a novel azimuth full-aperture pre-processing method is proposed to handle the SAR raw data formed by the BV-PRF scheme. The key point of the approach is the resampling of block data with different PRFs and the continuous splicing of azimuth data. The method mainly consists of four parts: de-skewing, resampling, azimuth continuous combination, and Doppler history recovery. After de-skewing, the raw data with different PRFs can be resampled individually to obtain a uniform azimuth sampling interval, and an appropriate azimuth time shift is introduced to ensure the continuous combination of the azimuth signal. Consequently, the resulting raw data are sufficiently and uniformly sampled in azimuth, which could be well handled by classical SAR-focusing algorithms. Simulation results on point targets validate the proposed azimuth pre-processing approach. Furthermore, compared with methods to process SAR data with continuous PRF, the proposed method is more effective. [ABSTRACT FROM AUTHOR]

Arc array synthetic aperture radar (AA-SAR), which can observe the scene in all directions, breaks through the single view of traditional SAR. However, the concealment of AA-SAR is poor. To mitigate this, arc array bistatic SAR (AA-BiSAR) with the moving transmitter is proposed, it has the advantages of good concealment and can expand the imaging scene, and improve the flexibility of the system. The imaging geometry including the signal model is established, and a range frequency-domain algorithm based on keystone transform (KT) is proposed in this paper. In the first step, the slant range equation is approximated by Taylor series expansion to compensate for the residual phase caused by the transmitter motion. In the second step, the range cell migration between the range and azimuth is eliminated through the KT method in the range frequency-domain. In the third step, using the data after range cell migration correction in step 2, an azimuth pulse compression is performed to obtain the focused image. In addition, the spatial resolution of the AA-BiSAR system is analyzed in detail. Finally, three simulation results verify the effectiveness of the proposed algorithm and the change in the spatial resolution. [ABSTRACT FROM AUTHOR]

Previous studies have shown that scattering mechanism ambiguity and negative power issues still exist in model-based polarization target decomposition algorithms, even though deorientation processing is implemented. One possible reason for this is that the dynamic range of the model itself is limited and cannot fully satisfy the mixed scenario. To address these problems, we propose a hybrid polarimetric target decomposition algorithm (GRH) with a generalized volume scattering model (GVSM) and a random particle cloud volume scattering model (RPCM). The adaptive volume scattering model used in GRH incorporates GVSM and RPCM to model the volume scattering model of the regions dominated by double-bounce scattering and the surface scattering, respectively, to expand the dynamic range of the model. In addition, GRH selects the volume scattering component between GVSM and RPCM adaptively according to the target dominant scattering mechanism of fully polarimetric synthetic aperture radar (PolSAR) data. The effectiveness of the proposed method was demonstrated using AirSAR dataset over San Francisco. Comparison studies were carried out to test the performance of GRH over several target decomposition algorithms. Experimental results show that the GRH outperforms the algorithms we tested in this study in decomposition accuracy and reduces the number of pixels with negative powers, demonstrating that the GRH can significantly avoid mechanism ambiguity and negative power issues. [ABSTRACT FROM AUTHOR]

Staggered synthetic aperture radar (SAR) can effectively stagger range blind areas by periodically changing the pulse repetition interval (PRI), to achieve continuous imaging with an ultrawide swath. In conventional staggered SAR, azimuth samples are nonuniformly distributed due to the variable PRI, and complex resampling processing, such as best linear unbiased (BLU) interpolation and multichannel reconstruction processing, is required. In this article, a strict rule of PRI variation and phase center adjustment (PCA) is proposed for staggered SAR, to solve the problem of nonuniform azimuth sampling. In the proposed joint strategy of PRI variation and PCA, the relevant parameters for PCA are first determined. Then, the PRI sequence is designed according to PCA parameters to stagger blind ranges. Finally, the PCA rule is designed according to the designed PRI sequence and PCA parameters. During the data acquisition interval, the effective phase center is periodically adjusted pulse by pulse according to this rule, making the azimuth samples totally uniformly distributed. In addition, the discontinuously distributed missing samples can be estimated by signal estimation approaches. With the proposed joint rule of PRI variation and PCA, the emergence of false targets in imaging results can be avoided, and the complex resampling processing can be relieved to reduce the computational complexity. Simulation experiments on imaging results verify the advantages of this strategy. [ABSTRACT FROM AUTHOR]

Radio frequency interference (RFI) sources pose threats to wideband synthetic aperture radar (SAR) systems and accurate SAR image interpretation. Since most of RFI sources are narrowband, notch filtering is a simple but effective method for RFI suppression. In this letter, a modified two-step notch filtering approach combined with linear prediction is proposed to improve the SAR image quality. The notch filtering is used to mitigate narrowband RFI energy, while the linear prediction is introduced to recover the missing range spectral component of the SAR raw data from the desired scene, which is removed together with RFI sources by the notch filter. Because of the Gibbs phenomenon in Fourier series, the small residual RFI energy after notch filtering is enough to cause image visual disturbances and affect the accuracy of the following missing range spectrum extrapolation. The two-step notch filtering with a limited bandwidth is applied for better RFI sources mitigation. Simulation results on both simulated targets and real SAR raw data validate the proposed approach. [ABSTRACT FROM AUTHOR]

Compared with the conventional 3-D synthetic aperture radar (SAR) system, the arc 3-D SAR can achieve a wide azimuth observation extent. In this letter, a far-field pseudopolar format imaging algorithm for the ground-based arc 3-D SAR is presented. Different from the existing algorithms, the proposed algorithm exploits keystone formatting and fast Fourier transforms (FFTs) to obtain a pseudopolar grid in the elevation direction, then complex multiplications and FFTs are performed in the range-azimuth wavenumber domain to complete 3-D focusing. The advantages of this method are its low computational complexity and high efficiency. The sampling criteria and computational complexity are also discussed in this letter. Finally, the performance of the proposed algorithm is validated with numerical simulations. [ABSTRACT FROM AUTHOR]

Ground-based radar can make high-precision and real-time monitoring of micro changes in the observation area. It has been actually applied in various industries such as land, open-pit mines, water conservancy dams, and highway bridges. The basic principle of the ground-based radar is to transmit and receive electromagnetic wave signals in the distance direction and to perform pulse compression, a synthetic aperture is formed in the azimuth using the motion of the platform, and the electromagnetic wave signals are coherently accumulated to form a two-dimensional image. In this article, a fast and efficient pseudo-polar coordinate format imaging algorithm is proposed. First, in order to prevent defocusing, the authors use the Taylor approximation and the accuracy difference of the phase change due to the distance approximation is analysed. Second, the 2-D fast Fourier transform effectively achieves uniform sampling of data. The technique is validated with numerical simulations. [ABSTRACT FROM AUTHOR]

To avoid two apertures adopted in air-borne continuous-wave (CW) synthetic aperture radar (SAR) systems, the novel air-borne linear frequency modulation range interrupted continuous wave (LFMRICW) SAR imaging mode is presented here. Different from the conventional air-borne CW imaging mode, it only requires one antenna to transmit radar pulses and receive its echoes. The system design of this mode is given in detail, and its imaging processor based on a linear prediction model (LPM) is proposed according to echo characteristics. Simulation results on distributed targets validate the presented new air-borne imaging scheme and its corresponding imaging processor. [ABSTRACT FROM AUTHOR]

Taking into account the respective advantages of synthetic aperture radar (SAR) data and optical data in obtaining object information, this article presents a method for retrieval of soil moisture in grassland based on multi-source data (SAR data, optical data and measured data). First of all, optical data is used to classify the grassland area, and then the SAR data is used to obtain the backscattering coefficient of the grassland area. Finally, the soil moisture under the vegetation cover is obtained through the water-cloud model and the microwave backscatter model. The soil moisture in grassland is retrieved and the retrieval results are compared and validated using measured data. The results showed that the suggested method has better classification precision for complex terrain with densely overlapping scattering mechanisms. This method also uses the measured data to correct the soil moisture, which greatly improves the precision of the results. [ABSTRACT FROM AUTHOR]

Airborne downward-looking sparse linear array 3-D synthetic aperture radar (DLSLA 3-D SAR) operates downward-looking observation and obtains the 3-D microwave scattering information of the observed scene. The cross-track physical sparse linear array is often configured to obtain uniform virtual phase centers in order to adopt the frequency-domain algorithm. However, the virtual phase centers usually have to be nonuniformly and sparsely distributed due to the array elements' installation locations restricted by the airborne platform and the airborne wing tremor effect. In this state, the frequency-domain algorithm cannot be directly used. In this paper, a DLSLA 3-D SAR image reconstruction algorithm that combines polar formatting and $L_1$ regularization is presented. Wave propagation and along-track dimensional imaging are first finished after polar formatting and wavefront curvature phase error compensation; then, cross-track dimensional imaging is completed with the $L_1$ regularization technique. The proposed algorithm is applicable to airborne DLSLA 3-D SAR imaging under nonuniformly and sparsely distributed virtual phase centers condition. The proposed algorithm was verified by 3-D distributed scene simulation experiment (P-band circular SAR image was selected as radar cross-section input, and X-band digital elevation model of the same area was selected as the coordinate positions of the scene) and the field experiment. Image reconstruction results and image reconstruction performances, such as normalized radar cross section, height errors, and orthographic projection image grayscale distribution, are demonstrated and analyzed with different signal-to-noise ratios, different array sparsity, and the incomplete compensated residual oscillation error 3-D distributed scene simulation experiments. Simulation and field experimental results show the good performance in focusing and the robustness of the proposed algorithm. [ABSTRACT FROM AUTHOR]

Airborne downward-looking sparse linear array 3-D synthetic aperture radar operates nadir observation and obtains the 3-D microwave scatter information of the observed scene. A polar format algorithm (PFA) with space-variant wave-front curvature phase error compensation is presented. A 3-D image in polar coordinate can be obtained with the proposed PFA, and a 3-D image in Cartesian coordinate can be obtained with interpolation. The proposed PFA possesses the advantages of high precision, low memory requirement, and low computational complexity. The focus performance of the proposed PFA is validated by 3-D distributed scene simulation with an airborne X-band digital elevation model and a P-band circular SAR image of the same area as simulation scene input. [ABSTRACT FROM PUBLISHER]

This letter presents a new algorithm for squint circular synthetic aperture radar (SAR) (CSAR) imaging, which is an extension of the well-known range migration algorithm. Due to the circular trajectory, the spatial frequency domain data of squint CSAR cannot be readily obtained via fast Fourier transform, as conventional SAR with straight path does. This method first employs along-track varying system kernels and filters to transform the raw data to the polar spatial frequency domain. Then, it uses an interpolation algorithm to convert the polar samples into rectilinear samples. Implementation aspects, including sampling criteria, resolutions, and computational complexity, are also assessed in this letter. The proposed algorithm is validated both numerically and experimentally. [ABSTRACT FROM PUBLISHER]

To acquire high-resolution wide-swath (HRWS) imaging capacity, the displaced phase center multichannel azimuth beam (DPCMAB) technology is usually adopted in spaceborne synthetic aperture radar (SAR), while multichannel reconstruction must be carried out before imaging process due to azimuth nonuniform sampling. Up to now, almost all azimuth multichannel reconstruction algorithms have been mainly based on conventional hyperbolic range equation (CHRE), but the accuracy of the CHRE model is usually not suitable for the HRWS mode, especially for high resolution and large squint observation cases. In this study, the azimuth multichannel signal model based on the advanced hyperbolic range equation (AHRE) is established and analyzed. The major difference between multichannel signal models based on CHRE and AHRE is the additional time-varying phase error between azimuth channels. The time-varying phase error is small and can be ignored in the monostatic DPCMAB SAR system, but it must be considered and compensated in the distributed DPCMAB SAR system. In addition to the time-varying phase error, additional Doppler spectrum shift and extended Doppler bandwidth should be considered in the squint case during azimuth multichannel reconstruction. The azimuth multichannel reconstruction algorithm based on AHRE is proposed in this paper. Before multichannel reconstruction and combination, time-varying phase errors between azimuth channels were first compensated, and the range-frequency-dependent de-skewing function was derived to remove the two-dimension (2D) spectrum tilt to avoid azimuth under-sampling. Then, azimuth multichannel data were reconstructed according to the azimuth multichannel impulse response based on AHRE. Finally, the range-frequency dependent re-skewing function was introduced to recover the tilted 2D spectrum. Simulation results on both point and distributed targets validated the proposed azimuth multichannel reconstruction approach. [ABSTRACT FROM AUTHOR]

Scan-on-receive (SCORE) digital beamforming (DBF) in elevation can significantly improve the signal-to-noise ratio (SNR) and suppress range ambiguities in spaceborne synthetic aperture radar (SAR). It has been identified as one of the important methods to obtain high-resolution wide-swath (HRWS) SAR images. However, with the improvement of geometric resolution and swath width, the residual pulse extension loss (PEL) due to the long pulse duration in the conventional spaceborne onboard DBF processor must be considered and reduced. In this paper, according to the imaging geometry of the spaceborne DBF SAR system, the reason for the large attenuation of the receiving gain at the edge of the wide swath is analyzed, and two improved onboard DBF methods to mitigate the receive gain loss are given and analyzed. Taking account of both the advantages and drawbacks of the two improved DBF methods presented, a novel onboard DBF processor with multi-frequency and multi-group time delays in HRWS SAR is proposed. Compared with the DBF processor only with multi-group time delays, the downlink data rate was clearly reduced, while focusing performance degradation due to phase and amplitude errors between different frequency bands could be mitigated compared with the DBF processor only with multi-frequency time delays. The simulation results of both point and distributed targets validate the proposed DBF processor. [ABSTRACT FROM AUTHOR]

In synthetic aperture radar (SAR) imaging, geometric resolution, sidelobe level (SLL) and signal-to-noise ratio (SNR) are the most important parameters for measuring the SAR image quality. The staring spotlight mode continuously transmits signals to a fixed area by steering the azimuth beam to acquire azimuth high geometric resolution, and its two-dimensional (2D) impulse response with the low SLL is usually obtained from the 2D weighted power spectral density (PSD) by the selected weighting window function. However, this results in the SNR reduction due to 2D amplitude window weighting. In this paper, the staring spotlight SAR with nonlinear frequency modulation (NLFM) signal and azimuth non-uniform sampling (ANUS) is proposed to obtain high geometric resolution SAR images with the low SLL and almost without any SNR reduction. The NLFM signal obtains non-equal interval frequency sampling points under uniform time sampling by adjusting the instantaneous chirp rate. Its corresponding PSD is similar to the weighting window function, and its pulse compression result without amplitude window weighting has low sidelobes. To obtain a similar Doppler frequency distribution for low sidelobe imaging in azimuth, the received SAR echoes are designed to be non-uniformly sampled in azimuth, in which the sampling sequence is dense in middle and sparse in both ends, and azimuth compression result with window weighting would also have low sidelobes. According to the echo model of the proposed imaging mode, both the back projection algorithm (BPA) and range migration algorithm (RMA) are modified and presented to handle the raw data of the proposed imaging mode. Both imaging results on simulated targets and experimental real SAR data processing results of a ground-based radar validate the proposed low sidelobe imaging mode. [ABSTRACT FROM AUTHOR]

Classification based on polarimetric synthetic aperture radar (PolSAR) images is an emerging technology, and recent years have seen the introduction of various classification methods that have been proven to be effective to identify typical features of many terrain types. Among the many regions of the study, the Hunshandake Sandy Land in Inner Mongolia, China stands out for its vast area of sandy land, variety of ground objects, and intricate structure, with more irregular characteristics than conventional land cover. Accounting for the particular surface features of the Hunshandake Sandy Land, an unsupervised classification method based on new decomposition and large-scale spectral clustering with superpixels (ND-LSC) is proposed in this study. Firstly, the polarization scattering parameters are extracted through a new decomposition, rather than other decomposition approaches, which gives rise to more accurate feature vector estimate. Secondly, a large-scale spectral clustering is applied as appropriate to meet the massive land and complex terrain. More specifically, this involves a beginning sub-step of superpixels generation via the Adaptive Simple Linear Iterative Clustering (ASLIC) algorithm when the feature vector combined with the spatial coordinate information are employed as input, and subsequently a sub-step of representative points selection as well as bipartite graph formation, followed by the spectral clustering algorithm to complete the classification task. Finally, testing and analysis are conducted on the RADARSAT-2 fully PolSAR dataset acquired over the Hunshandake Sandy Land in 2016. Both qualitative and quantitative experiments compared with several classification methods are conducted to show that proposed method can significantly improve performance on classification. [ABSTRACT FROM AUTHOR]

A synthetic aperture radar (SAR) system can be seriously contaminated by radio frequency systems because of working in the same microwave frequency bands, which would degrade the SAR image quality and affect the accuracy of image interpretation. In this paper, a novel radio frequency interference (RFI) suppression approach including RFI identification, band-stop filtering and a removed spectrum iterative adaptive approach (RSIAA) is proposed. First, the smoothing process is added before RFI signal detection to improve the RFI detection capacity. Afterwards, the band-stop filtering with a broaden factor is proposed to mitigate the residual RFI, and it ensures the accuracy of the following removed spectrum recovery by the RSIAA. Finally, the removed spectrum components are estimated from available adjacent spectrum data by the RSIAA in turn to obtain the desired range spectra. Compared with the conventional range frequency filtering method for RFI suppression, the capacity of the weak RFI signal detection is improved, and the increased sidelobes due to the discontinuous spectra are well suppressed. Simulation experiments on both simulated SAR raw data, Gaofen-3 and Sentinel-1 SAR raw data validate the proposed RFI suppression approach. [ABSTRACT FROM AUTHOR]

In a multichannel geosynchronous spaceborne–airborne bistatic synthetic aperture radar (GEO-SA-BiSAR) system, the airborne receiver can obtain high-resolution microwave images with good signal-to-noise ratios (SNRs) by passively receiving echoes from the desired area. Since the Doppler modulation and range history of a moving target are obviously different from a stationary target, a signal geometry model for moving targets in multichannel GEO-SA-BiSAR is established in this paper. According to simulation results, the along track velocity introduces target defocusing in azimuth, and the slant range velocity mainly causes multiple false targets. To resolve these problems, a modified multichannel reconstruction method in azimuth channel GEO-SA-BiSAR is proposed according to the azimuth multichannel impulse response of the imaged moving target. Before azimuth multichannel raw data combination, both spatial-variant range cell migration correction (RCMC) and azimuth nonlinear chirp scaling (ANLCS) should be performed to reduce the influence of the range offset and lower the Doppler bandwidth of the whole raw data, respectively. Afterward, a novel azimuth multichannel reconstruction algorithm is carried out via the modified reconstruction matrix based on the estimated target velocity. The target slant range velocity estimation is implemented by introducing the signal intensity ratio (SIR). Compared with the conventional method for the stationary target to handle the raw data of the moving target, the false targets could be obviously suppressed by using the proposed approach. Imaging results on both simulated point and distributed scene targets validate the proposed multichannel reconstruction approach. [ABSTRACT FROM AUTHOR]

Arc-array synthetic aperture radar (AA-SAR) has become a novel imaging scheme for full azimuth observation. However, the exiting arc-array monostatic SAR system is placed on a single platform and is easy to detect. Arc-array bistatic SAR (AA-BiSAR) with a stationary transmitter is proposed in this paper, which can obtain high data acquisition efficiency and reduce vulnerability of arc-array monostatic SAR. Furthermore, since the azimuth resolution with full azimuth observation is not related to the location of the stationary transmitter, the transmitter can be placed far away from the receiver. Compared with imaging algorithms for other modes, the key points of AA-BiSAR imaging algorithms are a square root in the bistatic slant range equation and an arc synthetic array in azimuth. According to the imaging geometry of AA-BiSAR, a novel imaging approach for AA-BiSAR based on keystone transform (KT) is proposed, and the KT implements range-cell migration correction (RCMC) in conditions of trigonometric function under square root in the range history and arc synthetic array in azimuth via reformatting the AA-BiSAR raw data. Besides presenting the proposed imaging approach, a complete resolution analysis of AA-BiSAR is given. Results of numerical simulation experiments on point targets validate the proposed imaging approach. [ABSTRACT FROM AUTHOR]

A spaceborne azimuth multichannel synthetic aperture radar (SAR) system can effectively realize high resolution wide swath (HRWS) imaging. However, the performance of this system is restricted by its two inherent defects. Firstly, non-uniform sampling is generated if the pulse repetition frequency (PRF) deviates from the optimum value. Secondly, multichannel systems are very sensitive to channel errors, which are difficult to completely eliminate. In this paper, we propose a novel receive antenna architecture with an azimuth phase center adaptive adjustment which adjusts the phase center position of each sub-aperture to improve multichannel SAR system performance. On one hand, the optimum value of the PRF can be adaptively adjusted within a certain range by adjusting receiving phase centers to obtain uniform azimuth sampling. On the other hand, false targets introduced by residual channel errors after azimuth multichannel error compensation can be further suppressed. The effectiveness of the proposed method to compensate for non-uniform sampling and suppress false targets is verified by simulation experiments. [ABSTRACT FROM AUTHOR]

Ground-based synthetic aperture radar (GB-SAR) uses active microwave remote-sensing observation mode to achieve two-dimensional deformation measurement and deformation trend extraction, which shows great prospects in the field of deformation monitoring. However, in the process of GB-SAR deformation monitoring, the disturbances caused by atmospheric effect cannot be neglected, and the atmospheric phases will seriously affect the precision of deformation monitoring. In discontinuous GB-SAR deformation monitoring mode, the atmospheric phases are particularly affected by changes of time and space, so the traditional models of atmospheric phase correction are no longer applicable. In this paper, the interferometric phase signal model considering atmospheric phase is first established. Then, the time- and space-varying characteristics of the atmospheric phase are analyzed, and a novel time- and space-varying atmospheric phase correction algorithm, based on coherent scatterers analysis, is proposed. Finally, slope deformation monitoring experiments are carried out to verify the validity and robustness of the proposed algorithm. [ABSTRACT FROM AUTHOR]